The N-terminal domain of human centrin 2 has a closed structure, binds calcium with a very low affinity, and plays a role in the protein self-assembly

Centrins are well-conserved calcium binding proteins from the EF-hand superfamily implicated in various cellular functions, such as centrosome duplication, DNA repair, and nuclear mRNA export. The intrinsic molecular flexibility and the self-association tendency make difficult the structural characterization of the integral protein. In this paper we report the solution structure, the Ca2+ binding properties, and the intermolecular interactions of the N-terminal domain of two human centrin isoforms, HsCen1 and HsCen2. In the absence of Ca2+, the N-terminal construct of HsCen2 revealed a compact core conformation including four almost antiparallel alpha-helices and a short antiparallel beta-sheet, very similar to the apo state structure of other calcium regulatory EF-hand domains. The first 25 residues show a highly irregular and dynamic structure. The three-dimensional model for the N-terminal domain of HsCen1, based on the high sequence conservation and NMR spectroscopic data, shows very close structural properties. Ca2+ titration of the apo-N-terminal domain of HsCen1 and HsCen2, monitored by NMR spectroscopy, revealed a very weak affinity (10(2)-10(3) M(-1)), suggesting that the cellular role of this domain is not calcium dependent. Isothermal calorimetric titrations showed that an 18-residue peptide, derived from the N-terminal unstructured fragment, has a significant affinity (approximately 10(5) M(-1)) for the isolated C-terminal domain, suggesting an active role in the self-assembly of centrin molecules.     

Structural, thermodynamic, and cellular characterization of human centrin 2 interaction with xeroderma pigmentosum group C protein

Human centrin 2 (HsCen2), an EF-hand calcium binding protein, plays a regulatory role in the DNA damage recognition during the first steps of the nucleotide excision repair. This biological action is mediated by the binding to a short fragment (N847-R863) from the C-terminal region of xeroderma pigmentosum group C (XPC) protein. This work presents a detailed structural and energetic characterization of the HsCen2/XPC interaction. Using a truncated form of HsCen2 we obtained a high resolution (1.8 A) X-ray structure of the complex with the peptide N847-R863 from XPC. Structural and thermodynamic analysis of the interface revealed the existence of both electrostatic and apolar inter-molecular interactions, but the binding energy is mainly determined by the burial of apolar bulky side-chains into the hydrophobic pocket of the HsCen2 C-terminal domain. Binding studies with various peptide variants showed that XPC residues W848 and L851 constitute the critical anchoring side-chains. This enabled us to define a minimal centrin binding peptide variant of five residues, which accounts for about 75% of the total free energy of interaction between the two proteins. Immunofluorescence imaging in HeLa cells demonstrated that HsCen2 binding to the integral XPC protein may be observed in living cells, and is determined by the same interface residues identified in the X-ray structure of the complex. Overexpression of XPC perturbs the cellular distribution of HsCen2, by inducing a translocation of centrin molecules from the cytoplasm to the nucleus. The present data confirm that the in vitro structural features of the centrin/XPC peptide complex are highly relevant to the cellular context.     

Calcium and magnesium binding to human centrin 3 and interaction with target peptides

There are four isoforms of centrin in mammals, with variable sequence, tissue expression, and functional properties. We have recently characterized a number of structural, ion, and target binding properties of human centrin isoform HsCen2. This paper reports a similar characterization of HsCen3, overexpressed in Escherichia coli and purified by phase-reversed chromatography. Equilibrium and dynamic binding studies revealed that HsCen3 has one mixed Ca(2+)/Mg(2+) binding site of high affinity (K(d) = 3 and 10 microM for Ca(2+) and Mg(2+), respectively) and two Ca(2+)-specific sites of low affinity (K(d) = 140 microM). The metal-free protein is fragmented by an unidentified protease into a polypeptide segment of 11 kDa, which was purified by HPLC, and identified by mass spectrometry as the segment of residues 21-112. Similarly, controlled trypsinolysis on Ca(2+)-bound HsCen3 yielded a mixture of segments of residues 1-124 and 1-125. The Ca(2+)/Mg(2+) site could be assigned to this segment and thus resides in the N-terminal half of HsCen3. Temperature denaturation experiments, circular dichroism, and utilization of fluorescence hydrophobic probes allowed us to propose that the metal-free protein has molten globule characteristics and that the dication-bound forms are compact with a polar surface for the Mg(2+) form and a hydrophobic exposed surface for the Ca(2+) form. Thus, HsCen3 could be classified as a Ca(2+) sensor protein. In addition, it is able to bind strongly to a model target peptide (melittin), as well as to peptides derived from the protein XPC and Kar1p, with a moderate Ca(2+) dependence.     

Curli provide the template for understanding controlled amyloid propagation

The uncontrolled formation of amyloid fibers is the hallmark of more than twenty human diseases. In contrast to disease-associated amyloids, which are the products of protein misfolding, E. coli assembles functional amyloid fibers called curli on its surface using an elegant biogenesis machine. Composed of a major subunit, CsgA, and a minor subunit, CsgB, curli play important roles in host cell adhesion, long-term survival and other bacterial community behaviors. Assembly of curli fibers is a template-directed conversion process where membrane-tethered CsgB initiates CsgA polymerization. The CsgA amyloid core is composed of five imperfect repeating units. In a series of in vivo and in vitro experiments, we determined the sequence and structural determinants that guide the initiation and propagation of CsgA polymers. The CsgA N- and C-terminal repeating units govern its polymerization and responsiveness to CsgB. Specifically, conserved glutamine and asparagine residues present in the CsgA N- and C-terminal repeating units are required for CsgB-mediated nucleation and efficient self-assembly.     

Thermodynamic analysis of self-assembly in coiled-coil biomaterials

Coiled-coil protein structural motifs have proven amenable to the design of structurally well-defined biomaterials. Mesoscale structural properties can be fairly well predicted based on rules governing the chemical interactions between the helices that define this structural motif. We explore the role of the hydrophobic core residues on the self-assembly of a coiled-coil polymer through a mutational analysis coupled with a salting-out procedure. Because the resultant polymers remain in solution, a thermodynamic approach is applied to characterize the polymer assembly using conventional equations from polymer theory to extract nucleation and elongation parameters. The stabilities and lengths of the polymers are measured using circular dichroism spectropolarimetry, sizing methods including dynamic light scattering and analytical ultracentrifugation, and atomic force microscopy to assess mesoscale morphology. Upon mutating isoleucines at two core positions to serines, we find that polymer stability is decreased while the degree of polymerization is about the same. Differences in results from circular dichroism and dynamic light scattering experiments suggest the presence of a stable intermediate state, and a scheme is proposed for how this intermediate might relate to the monomer and polymer states.     

Classical nucleation theory of virus capsids

A fundamental step in the replication of a viral particle is the self-assembly of its rigid shell (capsid) from its constituent proteins. Capsids play a vital role in genome replication and intercellular movement of viruses, and as such, understanding viral assembly has great potential in the development of new antiviral therapies and a systematic treatment of viral infection. In this article, we assume that nucleation is the underlying mechanism for self-assembly and combine the theoretical methods of the physics of equilibrium polymerization with those of the classical nucleation to develop a theory for the kinetics of virus self-assembly. We find expressions for the size of the critical capsid, the lag time, and the steady-state nucleation rate of capsids, and how they depend on both protein concentration and binding energy. The latter is a function of the acidity of the solution, the ionic strength, and the temperature, explaining why capsid nucleation is a sensitive function of the ambient conditions.     

Curli provide the template for understanding controlled amyloid propagation

The uncontrolled formation of amyloid fibers is the hallmark of more than twenty human diseases. In contrast to disease-associated amyloids, which are the products of protein misfolding, E. coli assembles functional amyloid fibers called curli on its surface using an elegant biogenesis machine. Composed of a major subunit, CsgA, and a minor subunit, CsgB, curli play important roles in host cell adhesion, long-term survival and other bacterial community behaviors. Assembly of curli fibers is a template-directed conversion process where membrane-tethered CsgB initiates CsgA polymerization. The CsgA amyloid core is composed of five imperfect repeating units. In a series of in vivo and in vitro experiments, we determined the sequence and structural determinants that guide the initiation and propagation of CsgA polymers. The CsgA N- and C-terminal repeating units govern its polymerization and responsiveness to CsgB. Specifically, conserved glutamine and asparagine residues present in the CsgA N- and C-terminal repeating units are required for CsgB-mediated nucleation and efficient self-assembly.Key words: amyloid, nucleation, polymerization, curli, sequence determinants     

Monomer-dependent secondary nucleation in amyloid formation

Secondary nucleation of monomers on the surface of an already existing aggregate that is formed from the same kind of monomers may lead to autocatalytic amplification of a self-assembly process. Such monomer-dependent secondary nucleation occurs during the crystallization of small molecules or proteins and self-assembled materials, as well as in protein self-assembly into fibrous structures. Indications of secondary nucleation may come from analyses of kinetic experiments starting from pure monomers or monomers supplemented with a low concentration of pre-formed aggregates (seeds). More firm evidence requires additional experiments, for example those employing isotope labels to distinguish new aggregates arising from the monomer from those resulting from fragmentation of the seed. In cases of amyloid formation, secondary nucleation leads to the formation of toxic oligomers, and inhibitors of secondary nucleation may serve as starting points for therapeutic developments. Secondary nucleation displays a high degree of structural specificity and may be enhanced by mutations or screening of electrostatic repulsion.     

Studies on the dissociation and urea-induced unfolding of FtsZ support the dimer nucleus polymerization mechanism

FtsZ is a major protein in bacterial cytokinesis that polymerizes into single filaments. A dimer has been proposed to be the nucleating species in FtsZ polymerization. To investigate the influence of the self-assembly of FtsZ on its unfolding pathway, we characterized its oligomerization and unfolding thermodynamics. We studied the assembly using size-exclusion chromatography and fluorescence spectroscopy, and the unfolding using circular dichroism and two-photon fluorescence correlation spectroscopy. The chromatographic analysis demonstrated the presence of monomers, dimers, and tetramers with populations dependent on protein concentration. Dilution experiments using fluorescent conjugates revealed dimer-to-monomer and tetramer-to-dimer dissociation constants in the micromolar range. Measurements of fluorescence lifetimes and rotational correlation times of the conjugates supported the presence of tetramers at high protein concentrations and monomers at low protein concentrations. The unfolding study demonstrated that the three-state unfolding of FtsZ was due to the mainly dimeric state of the protein, and that the monomer unfolds through a two-state mechanism. The monomer-to-dimer equilibrium characterized here (K(d) = 9 μM) indicates a significant fraction (~10%) of stable dimers at the critical concentration for polymerization, supporting a role of the dimeric species in the first steps of FtsZ polymerization.     

Lutetium(III)-dependent self-assembly study of ciliate Euplotes octocarinatus centrin

Ciliate Euplotes octocarinatus centrin (EoCen) is a member of the EF-hand superfamily of calcium-binding proteins, which often associated with the centrosomes and basal bodies. To explore the possible structural role of EoCen, we initiated a physicochemical study of the self-assembly properties of the purified protein in vitro. The native PAGE results indicate that only the integral protein shows multimers in the presence of Lu(3+). The dependence of Lu(3+) induced self-assembly of EoCen on various chemical and physical factors, including temperature, protein concentration, ionic strength and pH, was characterized using resonance light scattering (RLS). Control experiments with different metal ions suggest that Ca(2+) and Lu(3+) bindings to the N-terminal domain of EoCen are all positive to the self-assembly of the protein, and Lu(3+) exhibits the stronger effect, however, Mg(2+) alone cannot take the same effect. The experiments of 2-ptoluidinylnaphthalene-6-sulfonate (TNS) binding and ionic strength demonstrate that the lutetium(III)-dependent self-assembly is closely related to the exposure of hydrophobic cavity. Control experiment on pH value with EoCen and the fragments of it, N-terminal domain of EoCen (N-EoCen), indicates that the electrostatic effect is of small tendency to be served as the main driving force in the self-assembly of EoCen. The specific oligomerization form of the protein was exhibited by cross-linking experiment.     

Caldesmon inhibits Arp2/3-mediated actin nucleation

The Arp2/3 complex greatly accelerates actin polymerization, which is thought to play a major role in cell motility by inducing membrane protrusions including ruffling movements. Membrane ruffles contain a variety of actin-binding proteins, which would modulate Arp2/3-dependent actin polymerization. However, their exact roles in actin polymerization remain to be established. Because caldesmon is present in membrane ruffles, as well as in stress fibers, it may alter Arp2/3-mediated actin polymerization. We have found that caldesmon greatly retards Arp2/3-induced actin polymerization. Kinetic analyses have revealed that caldesmon inhibits the nucleation process, whereas it does not largely reduce elongation. Caldesmon is found to inhibit binding of Arp2/3 to F-actin, which apparently reduces the ability of F-actin as a secondary activator of Arp2/3-mediated nucleation. We also have found that the inhibition of the binding between actin and caldesmon either by Ca(2+)/calmodulin or by phosphorylation with cdc2 kinase reverses the inhibitory effect of caldesmon on Arp2/3-induced actin polymerization. Our results suggest that caldesmon may be a key protein that modulates membrane ruffling and that this may involve changes in caldesmon phosphorylation and/or intracellular calcium concentrations during signal transduction.     

Solubility of fluoromethemoglobin S: effect of phosphate and temperature on polymerization

The polymerization properties of the fully liganded fluoromet derivative of hemoglobin S (FmetHb S) were investigated by electron microscopy and absorption spectroscopy. Polymerization progress curves, as measured by increasing sample turbidity at 700 nm, exhibit a delay time (t(d)) consistent with the double nucleation mechanism. The pattern of fiber growth, as monitored by electron microscopy, is also indicative of a heterogeneous nucleation process, and dimensions of the fibers were found to be comparable to that of deoxyHb S. The polymerization rate constant (1/t(d)) depends exponentially on Hb S concentration, and the size of the homogeneous and heterogeneous nuclei also depend on FmetHb S concentration. As for deoxyHb S, higher concentrations of protein and phosphate favor fiber formation, while lower temperatures inhibit polymerization. Solubility experiments reveal, however, that eight times more FmetHb S is required for polymerization. The current studies further show that reaction order is independent of phosphate concentration if Hb S activity and not concentration is considered. The allosteric effector, inositol hexaphosphate (IHP), promotes fiber formation, and temperature-dependent reaggregation of FmetHb S suggests that IHP stabilizes pregelation aggregates. These studies show that FmetHb S resembles deoxyHb S in many of its polymerization properties; however, IHP-bound FmetHb S potentially provides a unique avenue for future studies of the early stages of Hb S polymerization and the effect of tertiary and quaternary protein structure on the polymerization process.     

Non-native aggregation of alpha-chymotrypsinogen occurs through nucleation and growth with competing nucleus sizes and negative activation energies

The kinetics and structural transitions of non-native aggregation of alpha-chymotrypsinogen (aCgn) were investigated over a wide range of temperature and initial protein concentration at pH 3.5, where high molecular weight aggregates remained soluble throughout the reaction. A comparison of thermodynamic, kinetic, and spectroscopic data shows that aggregation under non-native-favoring conditions proceeds through a molten globule unfolded monomer state, with a nucleation and growth mechanism. Formation of irreversible aggregates and conversion to beta-sheet secondary structures occur simultaneously without detectable intermediates, suggesting that beta-sheet formation may be a commitment step during the nucleation and growth stages. Analysis of the kinetics using a Lumry-Eyring with nucleated polymerization (LENP) model provides the predominant nucleus size and the product of the intrinsic nucleation and intrinsic growth time scales at each state point. We find that the nucleus size depends on both temperature and protein concentration, and in some cases there is competition between two distinct nucleus sizes. The observed rate coefficient (kobs) for aggregation displays a maximum as a function of temperature because of the competition between folding-unfolding thermodynamics and the intrinsic growth and nucleation rates; the latter contribution has a large, negative activation enthalpy that dominates kobs at elevated temperatures. Temperature-jump experiments reveal that aggregates depolymerize at high temperatures, indicating that they are lower in enthalpy than the free monomer. Overall, the results suggest more generally that non-native aggregation may proceed through more than one nucleus size and that intrinsic kinetics of nucleation and growth may have significant entropic barriers.     

Chaperone-mediated inhibition of tubulin self-assembly

Molecular chaperones are known to play an important role in facilitating the proper folding of many newly synthesized proteins. Here, we have shown that chaperone proteins exhibit another unique property to inhibit tubulin self-assembly efficiently. Chaperones tested include alpha-crystallin from bovine eye lenses, HSP16.3, HSP70 from Mycobacterium tuberculosis and alpha (s)-casein from milk. All of them inhibit polymerization in a dose-dependent manner independent of assembly inducers used. The critical concentration of MTP polymerization increases with increasing concentration of HSP16.3. Increase in chaperone concentration lowers the extent of polymerization and increases the lag time of self-assembly reaction. Although the addition of a chaperone at the early stage of elongation phase shows no effect on polymerization, the same concentration of chaperone inhibits polymerization completely when added before the initiation of polymerization. Bindings of HSP16.3 and alpha (s)-casein to tubulin have been confirmed using isothermal titration calorimetry. Affinity constants of tubulin are 5.3 xx 10(4) and 9.8 xx 10(5) M(-1) for HSP16.3 and alpha (s)-casein, respectively. Thermodynamic parameters indicate favourable entropy and enthalpy changes for both chaperones-tubulin interactions. Positive entropy change suggests that the interaction is hydrophobic in nature and desolvation occurring during formation of tubulin-chaperone complex. On the basis of thermodynamic data and observations made upon addition of chaperone at early elongation phase or before the initiation of polymerization, we hypothesize that chaperones bind tubulin at the protein-protein interaction site involved in the nucleation phase of self-assembly.     

Structure, Dynamics and Thermodynamics of the Human Centrin 2/hSfi1 Complex

Centrin, an EF-hand calcium-binding protein, has been shown to be involved in the duplication of centrosomes, and Sfi1 (Suppressor of fermentation-induced loss of stress resistance protein 1) is one of its centrosomal targets. There are three isoforms of human centrin, but here we only considered centrin 2 (HsCen2). This protein has the ability to bind to any of the ∼ 25 repeats of human Sfi1 (hSfi1) with more or less affinity. In this study, we mainly focused on the 17th repeat (R17-hSfi1-20), which presents the highest level of similarity with a well-studied 17-residue peptide (P17-XPC) from human xeroderma pigmentosum complementation group C protein, another centrin target for DNA repair. The only known structure of HsCen2 was resolved in complex with P17-XPC. The 20-residue peptide R17-hSfi1-20 exhibits the motif L8L4W1, which is the reverse of the XPC motif, W1L4L8. Consequently, the dipole of the helix formed by this motif has a reverse orientation. We wished to ascertain the impact of this reversal on the structure, dynamics and affinity of centrin. To address this question, we determined the structure of C-HsCen2 [the C-terminal domain of HsCen2 (T94-Y172)] in complex with R17-hSfi1-20 and monitored its dynamics by NMR, after having verified that the N-terminal domain of HsCen2 does not interact with the peptide. The structure shows that the binding mode is similar to that of P17-XPC. However, we observed a 2 -Å translation of the R17-hSfi1-20 helix along its axis, inducing less anchorage in the protein and the disruption of a hydrogen bond between a tryptophan residue in the peptide and a well-conserved nearby glutamate in C-HsCen2. NMR dynamic studies of the complex strongly suggested the existence of an unusual calcium secondary binding mode in calcium-binding loop III, made possible by the uncommon residue composition of this loop. The secondary metal site is only populated at high calcium concentration and depends on the type of bound ligand.     

Mechanism of prion propagation: amyloid growth occurs by monomer addition

Abundant nonfibrillar oligomeric intermediates are a common feature of amyloid formation, and these oligomers, rather than the final fibers, have been suggested to be the toxic species in some amyloid diseases. Whether such oligomers are critical intermediates for fiber assembly or form in an alternate, potentially separable pathway, however, remains unclear. Here we study the polymerization of the amyloidogenic yeast prion protein Sup35. Rapid polymerization occurs in the absence of observable intermediates, and both targeted kinetic and direct single-molecule fluorescence measurements indicate that fibers grow by monomer addition. A three-step model (nucleation, monomer addition, and fiber fragmentation) accurately accounts for the distinctive kinetic features of amyloid formation, including weak concentration dependence, acceleration by agitation, and sigmoidal shape of the polymerization time course. Thus, amyloid growth can occur by monomer addition in a reaction distinct from and competitive with formation of potentially toxic oligomeric intermediates.     

Erythrocyte microtubule assembly in vitro. Tubulin oligomers limit the rate of microtubule self-assembly

Chicken erythrocyte tubulin containing a unique beta tubulin variant polymerizes with greater efficiency (lower critical concentration) but at a slower rate than chicken brain tubulin. In a previous study we demonstrated that the low net rate of assembly is partly due to the presence of large oligomers and rings which reduce the initial rate of subunit elongation on microtubule seeds (Murphy, D.B., and Wallis, K.T. (1985) J. Biol. Chem. 260, 12293-12301). In this study we show that erythrocyte tubulin oligomers also retard the rate of microtubule nucleation and the net rate of self-assembly. The inhibitory effect is most likely to be due to the increased stability of erythrocyte tubulin oligomers, including a novel polymer of coiled rings that forms during the rapid phase of microtubule polymerization. The slow rate of dissociation of rings and coils into dimers and small oligomers appears to limit both the nucleation and elongation steps in the self-assembly of erythrocyte microtubules.     

Xeroderma pigmentosum group C protein possesses a high affinity binding site to human centrin 2 and calmodulin

Human centrin 2 (HsCen2), a member of the EF-hand superfamily of Ca2+-binding proteins, is commonly associated with centrosome-related structures. The protein is organized in two domains, each containing two EF-hand motifs, but only the C-terminal half exhibits Ca2+ sensor properties. A significant fraction of HsCen2 is localized in the nucleus, where it was recently found associated with the xeroderma pigmentosum group C protein (XPC), a component of the nuclear excision repair pathway. Analysis of the XPC sequence (940 residues), using a calmodulin target recognition software, enabled us to predict two putative binding sites. The binding properties of the two corresponding peptides were investigated by isothermal titration calorimetry. Only one of the peptides (P1-XPC) interacts strongly (Ka = 2.2 x 10(8) m-1, stoichiometry 1:1) with HsCen2 in a Ca2+-dependent manner. This peptide also binds, with a similar affinity (Ka = 1.1 x 10(8) m-1) to a C-terminal construct of HsCen2, indicating that the interaction with the integral protein is mainly the result of the contribution of the C-terminal half. The second peptide (P2-XPC) failed to show any detectable binding either to HsCen2 or to its C-terminal lobe. The two peptides interact with different affinities and mechanisms with calmodulin. Circular dichroism and nuclear magnetic resonance were used to structurally characterize the complex formed by the C-terminal domain of HsCen2 with P1-XPC.     

Mechanisms of homogeneous nucleation of polymers of sickle cell anemia hemoglobin in deoxy state

The primary pathogenic event of sickle cell anemia is the polymerization of the mutant hemoglobin (Hb) S within the red blood cells, occurring when HbS is in deoxy state in the venous circulation. Polymerization is known to start with nucleation of individual polymer fibers, followed by growth and branching via secondary nucleation, yet the mechanisms of nucleation of the primary fibers have never been subjected to dedicated tests. We implement a technique for direct determination of rates and induction times of primary nucleation of HbS fibers, based on detection of emerging HbS polymers using optical differential interference contrast microscopy after laser photolysis of CO-HbS. We show that: (i). nucleation throughout these determinations occurs homogeneously and not on foreign substrates; (ii). individual nucleation events are independent of each other; (iii). the nucleation rates are of the order of 10(6)-10(8)cm(-3)s(-1); (iv). nucleation induction times agree with an a priori prediction based on Zeldovich's theory; (v). in the probed parameter space, the nucleus contains 11 or 12 molecules. The nucleation rate values are comparable to those leading to erythrocyte sickling in vivo and suggest that the mechanisms deduced from in vitro experiments might provide physiologically relevant insights. While the statistics and dynamics of nucleation suggest mechanisms akin to those for small-molecule and protein crystals, the nucleation rate values are nine to ten orders of magnitude higher than those known for protein crystals. These high values cannot be rationalized within the current understanding of the nucleation processes.     

The C-Terminal Repeating Units of CsgB Direct Bacterial Functional Amyloid Nucleation

Curli are functional amyloids produced by enteric bacteria. The major curli fiber subunit, CsgA, self-assembles into an amyloid fiber in vitro. The minor curli subunit protein, CsgB, is required for CsgA polymerization on the cell surface. Both CsgA and CsgB are composed of five predicted β-strand-loop-β-strand-loop repeating units that feature conserved glutamine and asparagine residues. Because of this structural homology, we proposed that CsgB might form an amyloid template that initiates CsgA polymerization on the cell surface. To test this model, we purified wild-type CsgB and found that it self-assembled into amyloid fibers in vitro. Preformed CsgB fibers seeded CsgA polymerization as did soluble CsgB added to the surface of cells secreting soluble CsgA. To define the molecular basis of CsgB nucleation, we generated a series of mutants that removed each of the five repeating units. Each of these CsgB deletion mutants was capable of self-assembly in vitro. In vivo, membrane-localized mutants lacking the first, second, or third repeating units were able to convert CsgA into fibers. However, mutants missing either the fourth or fifth repeating units were unable to complement a csgB mutant. These mutant proteins were not localized to the outer membrane but were instead secreted into the extracellular milieu. Synthetic CsgB peptides corresponding to repeating units 1, 2, and 4 self-assembled into ordered amyloid polymers, while peptides corresponding to repeating units 3 and 5 did not, suggesting that there are redundant amyloidogenic domains in CsgB. Our results suggest a model where the rapid conversion of CsgB from unstructured protein to a β-sheet-rich amyloid template anchored to the cell surface is mediated by the C-terminal repeating units.