The role of hydroxyproline in collagen folding: conformational energy calculations on oligopeptides containing proline and hydroxyproline

We have observed that the rate of folding of the enzymatically hydroxylated form of poly(Gly-Pro-Pro) into the triple-helical conformation is considerably higher than that of the unhydroxylated polypeptide [R. K. Chopra and V. S. Ananthanarayanan (1982) Proc. Natl. Acad. Sci. USA 79 , 7180–7184]. In this study, we examine a plausible kinetic pathway for triple-helix formation by selecting peptide models for the unhydroxylated collagen molecule, and computing their conformational energies before and after proline hydroxylation. Starting with the available data on the preferred conformations of proline- and hydroxyproline-containing peptide sequences, energy minimization was carried out on the following pairs of peptides: Gly-Ala-Pro-Gly-Ala and Gly-Ala-Hyp-Gly-Ala; Gly-Pro-Pro-Gly-Ala and Gly-Pro-Hyp-Gly-Ala; Gly-Ala-Pro-Gly-Ala-Pro and Gly-Ala-Hyp-Gly-Ala-Hyp. It was found that, with each pair of peptides, the energetically most favorable conformation (I) has an extended structure at the Gly-Ala or Gly-Pro segment and a β-bend at the Pro-Gly or Hyp-Gly segment. In the Hyp-containing peptides, this conformation is further stabilized by a (Hyp_{i + 2})OH…OC(Gly_i) hydrogen bond. Conformation I is lower in energy by about 6–13 kcal/mol of the peptide than the fully extended conformations that resemble the single collagen polypeptide chain and contain no intramolecular hydrogen bond. In contrast to the proline counterpart, the hydroxyproline-containing peptides are found capable of adopting a partially extended conformation that does not contain the β-bend but retains the (Hyp)OH…OC(Gly) hydrogen bond. The energy of this conformation is intermediate between conformation I and the fully extended conformation. The continuation of the β-bend along the chain is restricted by stereochemical constraints that are more severe in the latter two pairs of peptides than in the first pair. Such a restriction may be considered to trigger the “unbending” of the minimum energy conformation leading to its straightening into the fully extended conformation; the latter, in turn, would lead to triple-helix formation through favorable interchain interactions. We propose that the partially extended conformation in the Hyp-containing peptides could serve as a kinetic intermediate on the way to forming the fully extended conformation. Because of the (Hyp_{i + 2})OH…OC(Gly_i) hydrogen bond, this conformation would also serve to lock the trans geometry at the Gly-Ala(Pro) and Ala(Pro)-Hyp peptide bonds, thereby enhancing the rate of their helix formation. A scheme for collagen folding in proposed on the basis of these results.     

Presence of a thermostable domain in the helical part of the type I collagen molecule and its role in the mechanism of triple helix folding.

A study has been done of the effect of neutral salts (NaCl and CaCl2) on the mechanism of type I collagen triple helix folding and unfolding in concentrated acetic acid solutions (2-8.8 M). It is shown that in these conditions, thermoabsorption and secondary structure change in heated solutions proceed in two consecutive stages. Salts exert a different destabilizing effect on different sites of the macromolecule, promoting the detection of a thermostable domain. The presence of a thermostable domain permits one to carry out reversible denaturation of collagen and to study the mechanism of the triple helix folding. Proceeding from the mechanism of the triple helix folding, an assumption has been made on the localization of the thermostable domain and its biological role.     

The role of glycine betaine in the protection of plants from stress: clues from transgenic plants

The acclimation of a plant to a constantly changing environment involves the accumulation of certain organic compounds of low molecular mass, known collectively as compatible solutes, in the cytoplasm. The evidence from numerous investigations of the physiology, genetics, biophysics and biochemistry of plants strongly suggests that glycine betaine (GB), an amphoteric quaternary amine, plays an important role as a compatible solute in plants under various types of environmental stress, such as high levels of salts and low temperature. Plant species vary in their capacity to synthesize GB and some plants, such as spinach and barley, accumulate relatively high levels of GB in their chloroplasts while others, such as Arabidopsis and tobacco, do not synthesize this compound. Genetic engineering has allowed the introduction into GB-deficient species of biosynthetic pathways to GB from both micro-organisms and higher plants; this approach has facilitated investigations of the importance of GB in stress protection. In this review, we summarize recent progress in the genetic manipulation of the synthesis of GB, with special emphasis on the relationship between the protective effects of GB in vivo and those documented in vitro.     

Triple helix assembly and processing of human collagen produced in transgenic tobacco plants

The use of tobacco plants as a novel expression system for the production of human homotrimeric collagen I is presented in this report. Constructs were engineered from cDNA encoding the human proalpha1(I) chain to generate transgenic tobacco plants expressing collagen I. The recombinant proalpha1(I) chains were expressed as disulfide-bonded trimers and were shown to fold into a stable homotrimeric triple helix. Moreover, the recombinant procollagen was subsequently processed to collagen as it occurs in animals. Large amounts of recombinant collagen were purified from field grown plant material. The data suggest that plants are a valuable alternative for the recombinant production of collagen for various medical and scientific purposes.     

The role of hydrophobic bonding in collagen fibril formation: a quantitative model

A model has been developed for approximating the free energy of collagen fibril formation (ΔF_f) and the equilibrium solubility of collagen under physiological conditions. The model utilizes an expression of Flory for rodlike polymers, with the modification that the “pure” anisotropic phase is defined as a collagen fibril containing about 0.3 g water/g collagen. The model also assumes that χ₁, the polymer–solvent interaction term, is entirely due to hydrophobic effects. χ₁ is estimated from hydrophobic bond energies of amino acid side chains, using the results of Némethy and Scheraga. The temperature dependence of χ₁ is utilized to calculate equilibrium solubilities and ΔF_f as a function of temperature.     

Immunogenicity and virus-like particle formation of rotavirus capsid proteins produced in transgenic plants

The human pathogen, group A rotavirus, is the most prevalent cause of acute infantile and pediatric gastroenteritis worldwide, especially in developing countries. There is an urgent demand for safer, more effective and cheaper vaccines against rotavirus infection. Plant-derived antigens may provide an exclusive way to produce economical subunit vaccines. Virus-like particles, constituting viral capsid proteins without viral nucleic acids, are considered a far safer candidate compared with live attenuated viral vaccines. In this study, the rotavirus capsid proteins VP2, VP6 and VP7 were co-expressed in transgenic tobacco plants, and their expression levels, formation of rotavirus-like particles (RV VLPs) and immunogenicity were extensively studied. Quantitative real-time RT-PCR and Western blot analysis revealed that the expression level of vp6 was the highest while vp7 was expressed at the lowest levels. The RV VLPs were purified from transgenic tobacco plants and analyzed by electron microscopy and Western blot. Results indicated that the plant-derived VP2, VP6 and VP7 proteins self-assembled into 2/6 or 2/6/7 RV VLPs with a diameter of 60–80 nm. When orally delivered into mice with cholera toxin as an adjuvant, the total soluble protein extracted from transgenic tobacco plants induced rotavirus-specific antibodies comparable with those of attenuated rotavirus vaccines, while VP 2/6/7 induced higher serum IgG and fecal IgA titers compared with VP 2/6.     

Mechanism of stabilization of a bacterial collagen triple helix in the absence of hydroxyproline

The Streptococcus pyogenes cell-surface protein Scl2 contains a globular N-terminal domain and a collagen-like domain, (Gly-Xaa-X'aa)(79), which forms a triple helix with a thermal stability close to that seen for mammalian collagens. Hyp is a major contributor to triple-helix stability in animal collagens, but is not present in bacteria, which lack prolyl hydroxylase. To explore the basis of bacterial collagen triple-helix stability in the absence of Hyp, biophysical studies were carried out on recombinant Scl2 protein, the isolated collagen-like domain from Scl2, and a set of peptides modeling the Scl2 highly charged repetitive (Gly-Xaa-X'aa)(n) sequences. At pH 7, CD spectroscopy, dynamic light scattering, and differential scanning calorimetry of the Scl2 protein all showed a very sharp thermal transition near 36 degrees C, indicating a highly cooperative unfolding of both the globular and triple-helix domains. The collagen-like domain isolated by trypsin digestion showed a sharp transition at the same temperature, with an enthalpy of 12.5 kJ/mol of tripeptide. At low pH, Scl2 and its isolated collagen-like domain showed substantial destabilization from the neutral pH value, with two thermal transitions at 24 and 27 degrees C. A similar destabilization at low pH was seen for Scl2 charged model peptides, and the degree of destabilization was consistent with the strong pH dependence arising from the GKD tripeptide unit. The Scl2 protein contained twice as much charge as human fibril-forming collagens, and the degree of electrostatic stabilization observed for Scl2 was similar to the contribution Hyp makes to the stability of mammalian collagens. The high enthalpic contribution to the stability of the Scl2 collagenous domain supports the presence of a hydration network in the absence of Hyp.     

Dissecting the role of p53 phosphorylation in homologous recombination provides new clues for gain-of-function mutants

Regulation of homologous recombination (HR) represents the best-characterized DNA repair function of p53. The role of p53 phosphorylation in DNA repair is largely unknown. Here, we show that wild-type p53 repressed repair of DNA double-strand breaks (DSBs) by HR in a manner partially requiring the ATM/ATR phosphorylation site, serine 15. Cdk-mediated phosphorylation of serine 315 was dispensable for this anti-recombinogenic effect. However, without targeted cleavage of the HR substrate, serine 315 phosphorylation was necessary for the activation of topoisomerase I-dependent HR by p53. Moreover, overexpression of cyclin A1, which mimics the situation in tumors, inappropriately stimulated DSB-induced HR in the presence of oncogenic p53 mutants (not Wtp53). This effect required cyclin A1/cdk-mediated phosphorylation for stable complex formation with topoisomerase I. We conclude that p53 mutants have lost the balance between activation and repression of HR, which results in a net increase of potentially mutagenic DNA rearrangements. Our data provide new insight into the mechanism underlying gain-of-function of mutant p53 in genomic instability.     

Overexpressing the ANR1 MADS-box gene in transgenic plants provides new insights into its role in the nitrate regulation of root development

The expression of the ANR1 MADS-box gene was manipulated in transgenic plants to investigate its role in the NO(3)(-)-dependent regulation of root development in Arabidopsis thaliana. Constitutive overexpression of ANR1 in roots, achieved using GAL4 enhancer trap lines, resulted in more rapid early seedling development, increased lengths and numbers of lateral roots and increased shoot fresh weight. Based on results obtained with five different enhancer trap lines, the overexpression of ANR1 in the lateral root tips appears to be more important for this phenotype than its level of expression in the developing lateral root primordia. Dexamethasone-mediated induction of ANR1 in lines expressing an ANR1-GR (glucocorticoid receptor) fusion protein stimulated lateral root growth but not primary root growth. Short-term (24 h) dexamethasone treatments led to prolonged stimulation of lateral root growth, whether the lateral roots were already mature or still unemerged at the time of treatment. In split-root experiments, localized application of dexamethasone to half of the root system of an ANR1-GR line elicited a localized increase in both the length and numbers of lateral roots, mimicking the effect of a localized NO(3)(-) treatment. In both types of transgenic line, the root phenotype was strongly dependent on the presence of NO(3)(-), indicating that there are additional components involved in ANR1 function that are NO(3)(-) regulated. The implications of these results for our understanding of ANR1's mode of action in the root response to localized NO(3)(-) are discussed.     

Modulation of self-association and subsequent fibril formation in an alanine-rich helical polypeptide

Thermal unfolding, reversible self-association, and irreversible aggregation were investigated for an alanine-rich helical polypeptide, 17-H-6, with sequence [AAAQEAAAAQAAAQAEAAQAAQ] 6. Dynamic light scattering, transmission electron microscopy, and thermal unfolding measurements indicate that 17-H-6 spontaneously and reversibly self-associates at acidic pH and low temperature. The resulting multimers have a compact, globular morphology with an average hydrodynamic radius approximately 10-20 nm and reversibly dissociate to monomers upon an increase to pH 7.4. Both free monomer and 17-H-6 chains within the multimers are alpha-helical and folded at low temperature. Reversible unfolding of the monomer occurs upon heating of solutions at pH 7.4. At pH 2.3, heating first causes incomplete dissociation and unfolding of the constituent chains. Further incubation at elevated temperature induces additional structural and morphological changes and results in fibrils with a beta-sheet 2 degrees structure and a characteristic diameter of 5-10 nm (7 nm mean). The ability to modulate association and aggregation suggests opportunities for this class of polypeptides in nanotechnology and biomedical applications.     

The mammalian chitinase-like lectin, YKL-40, binds specifically to type I collagen and modulates the rate of type I collagen fibril formation

YKL-40 is expressed in arthritic cartilage and produced in large amounts by cultured chondrocytes, but its exact role is unclear, and the identities of its physiological ligands remain unknown. Purification of YKL-40 from resorbing bovine nasal cartilage and chondrocyte monolayers demonstrated the existence of three isoforms, a major and minor form from resorbing cartilage and a third species from chondrocytes. Affinity chromatography experiments with purified YKL-40 demonstrated specific binding of all three forms to collagen types I, II, and III, thus identifying collagens as potential YKL-40 ligands. Binding to immobilized type I collagen was inhibited by soluble native ligand, but not heat-denatured ligand, confirming a specific interaction. Binding of the chondrocyte-derived species to type I collagen was also demonstrated by surface plasmon resonance analysis, and the dissociation rate constant was calculated (3.42 x 10(-3) to 4.50 x 10(-3) s(-1)). The chondrocyte-derived species was found to prevent collagenolytic cleavage of type I collagen and to stimulate the rate of type I collagen fibril formation in a concentration-dependent manner. By contrast, the cartilage major form had an inhibitory effect on type I collagen fibrillogenesis. Digestion with N-glycosidase F, endoglycosidase H and lectin blotting did not reveal any difference in the carbohydrate component of these two YKL-40 species, indicating that this does not account for the opposing effects on fibril formation rate.     

Structural heterogeneity of type I collagen triple helix and its role in osteogenesis imperfecta

We investigated regions of different helical stability within human type I collagen and discussed their role in intermolecular interactions and osteogenesis imperfecta (OI). By differential scanning calorimetry and circular dichroism, we measured and mapped changes in the collagen melting temperature (DeltaTm) for 41 different Gly substitutions from 47 OI patients. In contrast to peptides, we found no correlations of DeltaTm with the identity of the substituting residue. Instead, we observed regular variations in DeltaTm with the substitution location in different triple helix regions. To relate the DeltaTm map to peptide-based stability predictions, we extracted the activation energy of local helix unfolding (DeltaG) from the reported peptide data. We constructed the DeltaG map and tested it by measuring the H-D exchange rate for glycine NH residues involved in interchain hydrogen bonds. Based on the DeltaTm and DeltaG maps, we delineated regional variations in the collagen triple helix stability. Two large, flexible regions deduced from the DeltaTm map aligned with the regions important for collagen fibril assembly and ligand binding. One of these regions also aligned with a lethal region for Gly substitutions in the alpha1(I) chain.     

The glycosaminoglycan chain of decorin plays an important role in collagen fibril formation at the early stages of fibrillogenesis

Decorin is a multifunctional small leucine-rich proteoglycan involved in the regulation of collagen fibrillogenesis. In patients with a variant of Ehlers-Danlos syndrome, about half of the secreted decorin lacks the single glycosaminoglycan side chain. Notably, these patients have a skin-fragility phenotype that resembles that of decorin null mice. In this study, we investigated the role of glycanated and unglycanated decorin on collagen fibrillogenesis. Glycosaminoglycan-free decorin, generated by mutating Ser4 of the mature protein core into Ala (DCN-S4A), showed reduced inhibition of fibrillogenesis compared with the decorin proteoglycan. Interestingly, using a 3D matrix generated by decorin-null fibroblasts, an increase in fibril diameter was found after the addition of decorin, and even greater effects were observed with DCN-S4A. To avoid potential side effects of artificial tags, adenoviruses containing decorin and DCN-S4A were used to transduce decorin-null fibroblasts prior to matrix formation. Both molecules were efficiently incorporated into the matrix, with no changes in collagen composition and network formation, or altered expression of the related proteoglycan biglycan. Both decorin and DCN-S4A mutants increased the collagen fibril diameter, with the latter showing the most prominent effects. These data show that at early stages of fibrillogenesis, the glycosaminoglycan chain of decorin has a reducing effect on collagen fibril diameter.     

Assembly of type I collagen: fusion of fibril subunits and the influence of fibril diameter on mechanical properties.

Structural stability of the extracellular matrix is primarily a consequence of fibrillar collagen and the extent of cross-linking. The relationship between collagen self-assembly, consequent fibrillar shape and mechanical properties remains unclear. Our laboratory developed a model system for the preparation of self-assembled type I collagen fibers with fibrillar substructure mimicking the hierarchical structures of tendon. The present study evaluates the effects of pH and temperature during self-assembly on fibrillar structure, and relates the structural effects of these treatments on the uniaxial tensile mechanical properties of self-assembled collagen fibers. Results of the analysis of fibril diameter distributions and mechanical properties of the fibers formed under the different incubation conditions indicate that fibril diameters grow via the lateral fusion of discrete approximately 4 nm subunits, and that fibril diameter correlates positively with the low strain modulus. Fibril diameter did not correlate with either the ultimate tensile strength or the high strain elastic modulus, which suggests that lateral aggregation and consequently fibril diameter influences mechanical properties during small strain mechanical deformation. We hypothesize that self-assembly is mediated by the formation of fibrillar subunits that laterally and linearly fuse resulting in fibrillar growth. Lateral fusion appears important in generating resistance to deformation at low strain, while linear fusion leading to longer fibrils appears important in the ultimate mechanical properties at high strain.     

Opposing effects of collagen I and vitronectin on fibronectin fibril structure and function

Extracellular matrix fibronectin fibrils serve as passive structural supports for the organization of cells into tissues, yet can also actively stimulate a variety of cell and tissue functions, including cell proliferation. Factors that control and coordinate the functional activities of fibronectin fibrils are not known. Here, we compared effects of cell adhesion to vitronectin versus type I collagen on the assembly of and response to, extracellular matrix fibronectin fibrils. The amount of insoluble fibronectin matrix fibrils assembled by fibronectin-null mouse embryonic fibroblasts adherent to collagen- or vitronectin-coated substrates was not significantly different 20 h after fibronectin addition. However, the fibronectin matrix produced by vitronectin-adherent cells was ~ 10-fold less effective at enhancing cell proliferation than that of collagen-adherent cells. Increasing insoluble fibronectin levels with the fibronectin fragment, anastellin did not increase cell proliferation. Rather, native fibronectin fibrils polymerized by collagen- and vitronectin-adherent cells exhibited conformational differences in the growth-promoting, III-1 region of fibronectin, with collagen-adherent cells producing fibronectin fibrils in a more extended conformation. Fibronectin matrix assembly on either substrate was mediated by α5β1 integrins. However, on vitronectin-adherent cells, α5β1 integrins functioned in a lower activation state, characterized by reduced 9EG7 binding and decreased talin association. The inhibitory effect of vitronectin on fibronectin-mediated cell proliferation was localized to the cell-binding domain, but was not a general property of αvβ3 integrin-binding substrates. These data suggest that adhesion to vitronectin allows for the uncoupling of fibronectin fibril formation from downstream signaling events by reducing α5β1 integrin activation and fibronectin fibril extension.