Green fluorescent protein as a novel indicator of antimicrobial susceptibility in Aureobasidium pullulans.

Presently there is no method available that allows noninvasive and real-time monitoring of fungal susceptibility to antimicrobial compounds. The green fluorescent protein (GFP) of the jellyfish Aequoria victoria was tested as a potential reporter molecule for this purpose. Aureobasidium pullulans was transformed to express cytosolic GFP using the vector pTEFEGFP (A. J. Vanden Wymelenberg, D. Cullen, R. N. Spear, B. Schoenike, and J. H. Andrews, BioTechniques 23:686-690, 1997). The transformed strain Ap1 gfp showed bright fluorescence that was amenable to quantification using fluorescence spectrophotometry. Fluorescence levels in Ap1 gfp blastospore suspensions were directly proportional to the number of viable cells determined by CFU plate counts (r(2) > 0.99). The relationship between cell viability and GFP fluorescence was investigated by adding a range of concentrations of each of the biocides sodium hypochlorite and 2-n-octylisothiozolin-3-one (OIT) to suspensions of Ap1 gfp blastospores (pH 5 buffer). These biocides each caused a rapid (< 25-min) loss of fluorescence of greater than 90% when used at concentrations of 150 microg of available chlorine ml(-1) and 500 microg ml(-1), respectively. Further, loss of GFP fluorescence from A. pullulans cells was highly correlated with a decrease in the number of viable cells (r(2) > 0.92). Losses of GFP fluorescence and cell viability were highly dependent on external pH; maximum losses of fluorescence and viability occurred at pH 4, while reduction of GFP fluorescence was absent at pH 8.0 and was associated with a lower reduction in viability. When A. pullulans was attached to the surface of plasticized poly(vinylchloride) containing 500 ppm of OIT, fluorescence decreased more slowly than in cell suspensions, with > 95% loss of fluorescence after 27 h. This technique should have broad applications in testing the susceptibility of A. pullulans and other fungal species to antimicrobial compounds.     

Evaluation of a model biofilm for the ranking of biocide performance against sulphate-reducing bacteria

A model artificial biofilm was developed and evaluated for ranking the performance of biocides for application in oil production pipelines. The biofilm consisted of an alginate gel matrix into which were incorporated bacteria, scrapings from the inner surfaces of oil production pipelines and some crude oil.
The viability and sulphide-respiration rates of sulphate-reducing bacteria (SRB) within freshly-prepared artificial biofilm remained largely unchanged during a 2-week storage period. Furthermore, storage of the model biofilm did not alter the susceptibility of the incorporated SRB to a biocide. These findings showed that artificial biofilm may be produced in advance of a biocide assessment study and stored for at least 2 weeks over the course of the study without the model system undergoing changes which affected the relative performance of the biocides assessed. Artificial biofilms were found to be more resistant to biocides than planktonic bacteria and the addition of oil pipeline scrapings and crude oil to the artificial biofilm was found to increase further the resistance of biofilm to biocides.     

Comparative susceptibility of resident and transient hand bacteria to para-chloro-meta-xylenol and triclosan

AIMS: To determine the susceptibility of planktonic and biofilm-grown strains of resident and transient skin bacteria to the liquid hand soap biocides para-chloro-meta-xylenol (PCMX) and triclosan. METHODS AND RESULTS: Freshly isolated hand bacteria were identified by partial 16S rRNA gene sequencing. Two resident and three transient strains, as well as four exogenous potential transient strains, were selected for biocide susceptibility testing. The minimum inhibitory concentrations (MIC) and minimum bactericidal concentrations (MBC) of planktonic cells were determined. Resident and transient strains showed a range of susceptibilities to both biocides (PCMX, MIC 12.5-200 mg x l(-1), MBC 100-400 mg x l(-1); triclosan, MIC 0.6- > 40 mg x l(-1), MBC 1.3- > 40 mg x l(-1)). Strains were attached to polystyrene plates for 65 h in 96-well microtitre plates and challenged with biocide to determine the biofilm inhibitory concentration and biofilm eradicating concentration. For all strains tested, biofilms were two- to eightfold less susceptible than planktonic cells to PCMX. CONCLUSIONS: Very few transients were detected on the hand. Transients were not more sensitive than residents to the biocides and susceptibility to PCMX and triclosan was strain dependent. Biofilm-grown strains were less susceptible to PCMX than planktonic cells. SIGNIFICANCE AND IMPACT OF THE STUDY: The study provides increased knowledge about the susceptibility of skin bacteria to biocides present in typical liquid antibacterial hand soaps and suggests that the concentration of biocide employed in such products is in excess of that required to kill the low numbers of transient bacteria typically found on skin.     

Characterization of biofilm growth and biocide susceptibility testing of Mycobacterium phlei using the MBEC assay system

The importance of non-tuberculosis mycobacterial biofilm species in medicine, industry and the environment has recently gained attention. Our objectives were to characterize biofilm growth of Mycobacterium phlei M4, as a model of rapidly growing mycobacteria using the minimal biofilm eradication concentration (MBEC) and to compare biocide susceptibility of planktonic and biofilm organisms. Scanning electron microscopy was also carried out to observe biofilm morphology. With the exception of Sporicidin and Virkon the minimum bactericidal concentration values for all biocides tested were lower than the MBEC values. The MBEC assay system was seen to produce multiple and reproducible biofilms of M. phlei and to be a useful tool for susceptibility studies.     

Assessment of resistance towards biocides following the attachment of micro-organisms to, and growth on, surfaces

AIMS: To develop a rapid method for the assessment of biocidal activity directed towards intact biofilms. METHODS AND RESULTS: Escherichia coli and Staphylococcus epidermidis were cultured for up to 48 h within 96-well microtitre plates. The planktonic phase was removed and the wells rinsed. Residual biofilms were exposed to various concentrations of chloroxylenol, peracetic acid, polyhexamethylene biguanide (PHMB), cetrimide or phenoxyethanol for 1 h. At 15-min intervals, biocide was removed, and the wells washed in neutraliser and filled with volumes of fresh medium. Re-growth of the cultures was monitored during incubation at 35 degrees C in the plate reader. Times taken for the treated wells to re-grow to fixed endpoints were determined and related to numbers of surviving cells. Time--survival curves were constructed and the survival of the attached bacteria, following exposure to the agents for 30 min, interpolated for each biocide concentration. Log--log plots of these survival data and biocide concentration were constructed, and linear regression analysis performed in order to (i) calculate concentration exponents and (ii) compare the effectiveness of the biocides between variously aged biofilm and planktonic cells. From such analyses iso-effective concentrations of biocide (95% kill in 30 min) were calculated and expressed as planktonic : biofilm indices (PBI). CONCLUSION: PBI varied between 1.02 and 0.02, were relatively unaffected by age of the biofilms but differed significantly between organism and biocide. Notably those compounds with the higher activity against planktonic bacteria (PHMB and peracetic acid) were most prone to a biofilm effect but remained the most effective of the agents selected. SIGNIFICANCE AND IMPACT OF THE STUDY: The endpoint method proved robust, enabled the bactericidal effects of the biocides to be assessed against in-situ biofilms, and was suitable for routine screening applications.     

The use of biocides to control sulphate‐reducing bacteria in biofilms on mild steel surfaces

Three different types of biocides, viz. formaldehyde (FM), glutaraldehyde (GA) and isothiozolone (ITZ) were used to control planktonic and sessile populations of two marine isolates of sulphate‐reducing bacteria (SRB). The influence of these biocides on the initial attachment of cells to mild steel surfaces, on subsequent biofilm formation and on the activity of hydrogenase enzymes within developed biofilms was evaluated. In the presence of biocides the rate and degree of colonization of mild steel by SRB depended on incubation time, bacterial isolate and the type of biocide used. Although SRB differed in their susceptibility to biocides, for all isolates the biofilm population was more resistant to the treatment than the planktonic population. GA showed highest efficiency in controlling planktonic and sessile SRB compared with the other two biocides. The activity of the enzyme hydrogenase measured in SRB biofilms varied between isolates and with the biocide treatment. No correlation was found between the number of sessile cells and hydrogenase activity.     

Analysis of biocide transport limitation in an artificial biofilm system

An alginate gel bead artificial biofilm system was used to assay biofilm susceptibility to four biocides and to analyse the extent to which each agent penetrated the biofilm. Chlorine, glutaraldehyde, an isothiazolone, and a quaternary ammonium compound were tested on alginate-entrapped Enterobacter aerogenes in gel beads ranging from 1·8 to 6 mm in diameter. Gel-entrapped bacteria were less susceptible to all four antimicrobial agents than were planktonic micro-organisms. The degree of kill measured in artificial biofilm gel beads depended on the size of the gel bead and the cell density at which it was loaded. Disinfection efficacy decreased as gel bead radius or cell density increased. The manifest dependence of biofilm disinfection efficacy on the physical properties of the artificial biofilm (radius and cell density) suggests the impingement of transport limitation of biocide transport into the biofilm. A previously developed theory of biocide reaction and diffusion in biofilm was tested by calculating an appropriate Thiele modulus. In accordance with the theory, the efficacy of all four biocides decreased, albeit noisily, as the Thiele modulus exceeded 1. This result demonstrates that transport limitation can impact antimicrobial performance against biofilms not only of oxidizing biocides but also of non-oxidizing agents.     

A green biocide enhancer for the treatment of sulfate-reducing bacteria (SRB) biofilms on carbon steel surfaces using glutaraldehyde

Generally speaking, a much higher concentration of biocide is needed to treat biofilms compared to the dosage used to for planktonic bacteria. With increasing restrictions of environmental regulations and safety concerns on large-scale biocide uses such as oil field applications, it is highly desirable to make more effective use of biocides. In this paper a green biocide enhancer ethylenediaminedisuccinate (EDDS) that is a biodegradable chelator, was found to enhance the efficacy of glutaraldehyde in its treatment of sulfate-reducing bacteria (SRB) biofilms. Experiments were carried out in 100 ml anaerobic vials with carbon steel coupons. The ATCC 14563 strain of Desulfovibrio desulfuricans was used. Biofilms on coupon surfaces were visualized using scanning electron microscopy (SEM). Experimental results showed that EDDS reduced the glutaraldehyde dosages considerably in the inhibition of SRB biofilm establishment and the treatment of established biofilms on carbon steel coupon surfaces.     

The effects of disinfectant foam on microbial biofilms

This investigation examined the effects of common aqueous biocides and disinfectant foams derived from them on Pseudomonas aeruginosa biofilms. Biofilms were grown on stainless steel coupons under standardised conditions in a reactor supplemented with low concentrations of organic matter to simulate conditions prevalent in industrial systems. Five-day-old biofilms formed under ambient conditions with continuous agitation demonstrated a low coefficient of variation (5.809%) amongst viable biofilm bacteria from independent trials. Scanning electron microscopy revealed biofilms on coupons with viable biofilm bacteria observed by confocal microscopy. An aqueous solution of a common foaming agent amine oxide (AO) produced negligible effects on bacterial viability in biofilms (p>0.05). However, significant biofilm inactivation was noted with aqueous solutions of common biocides (peracetic acid, sodium hypochlorite, sodium ethylenediaminetetraacetic acid) with or without AO (p<0.05). Aereation of a mixture of AO with each of these common biocides resulted in significant reductions in the viability of biofilm bacteria (p<0.05). In contrast, limited effects were noted by foam devoid of biocides. A relationship between microbial inactivation and the concentration of biocide in foam (ranging from 0.1-0.5%) and exposure period were noted (p<0.05). Although, lower numbers of viable biofilm bacteria were recovered after treatment with the disinfectant foam than by the cognate aqueous biocide, significant differences between these treatments were not evident (p>0.05). In summary, the studies revealed significant biofilm inactivation by biocidal foam prepared with common biocides. Validation of foam disinfectants in controlled trials at manufacturing sites may facilitate developments for clean in place applications. Advantages of foam disinfectants include reductions in the volumes of biocides for industrial disinfection and in their disposal after use.     

Efficacy of biocides on laboratory-generated Legionella biofilms

Results of biocide efficacy testing on laboratory-generated microbial biofilms containing Legionella bozemanii is presented. These show that chlorine is effective at recommended concentrations in cooling towers; at least 48 h contact between free chlorine and the biofilm is necessary. Of five commercial biocides tested, those containing isothiazolinones and dibromonitrilo-proprionamide were most effective against sessile L. bozemanii.     

Modelling biofilm‐induced formation damage and biocide treatment in subsurface geosystems

Biofilm growth in subsurface porous media, and its treatment with biocides (antimicrobial agents), involves a complex interaction of biogeochemical processes which provide non‐trivial mathematical modelling challenges. Although there are literature reports of mathematical models to evaluate biofilm tolerance to biocides, none of these models have investigated biocide treatment of biofilms growing in interconnected porous media with flow. In this paper, we present a numerical investigation using a pore network model of biofilm growth, formation damage and biocide treatment. The model includes three phases (aqueous, adsorbed biofilm, and solid matrix), a single growth‐limiting nutrient and a single biocide dissolved in the water. Biofilm is assumed to contain a single species of microbe, in which each cell can be a viable persister, a viable non‐persister, or non‐viable (dead). Persisters describe small subpopulation of cells which are tolerant to biocide treatment. Biofilm tolerance to biocide treatment is regulated by persister cells and includes ‘innate’ and ‘biocide‐induced’ factors. Simulations demonstrate that biofilm tolerance to biocides can increase with biofilm maturity, and that biocide treatment alone does not reverse biofilm‐induced formation damage. Also, a successful application of biological permeability conformance treatment involving geologic layers with flow communication is more complicated than simply engineering the attachment of biofilm‐forming cells at desired sites.     

Effect of Biocides on Biofilm Bacteria from Dental Unit Water Lines

Microbial biofilm formation in dental unit water lines (DUWL) is a phenomenon that has been recognized for nearly four decades. Water delivered by DUWL can harbor high numbers of bacteria, including opportunistic pathogens. Biofilms on tubing within DUWL may serve as a reservoir for these microorganisms and should therefore be controlled. In this study, the effects of eight biocides were monitored on DUWL biofilms individually and in combination by epifluorescence microscopy and total viable counts (TVC). The effects of sodium dodecyl sulphate (SDS), hydrogen peroxide (H₂O₂), sodium hypochlorite (NaOCl), phenol (Phe), Tween 20 (Tw 20), ethylenediaminetetraacetic acid (EDTA), chlorohexidine gluconate (CHX), and povidine iodine (PI) were tested on DUWL biofilms alone and in combination. PI was found to have negligible effects on biofilm removal either applied alone or in combined form with CHX. Applying all biocides simultaneously did not completely eliminate viable bacteria nor did they remove biofilm. Overall, when combined, the biocides performed better than singly applied products. The most effective biocides were NaOCl and Phe (both alone and in combination).     

Study of the activity of quaternary ammonium compounds in the mitigation of biofouling in heat exchangers–condensers cooled by seawater

The effectiveness of two quaternary ammonium compounds (QACs) (non-oxidising biocides) to reduce the growth of biofilm adhering to the tubes of a heat exchanger-condenser cooled by seawater was evaluated. Their effectiveness was compared to that of a conventional oxidising biocide (sodium hypochlorite [NaOCl]) under the same testing conditions. Each biocide was applied intermittently (6?h on, 6?h off) in a first shock stage (1.5?ppm over 8?days) and a second stabilising stage (0.5?ppm over 20?days). The results showed that the antifouling effectiveness of the first of the QACs (fifth generation) was comparable to that shown by the oxidising power of NaOCl. Although the reaction time was longer than that of NaOCl, both the compounds removed the biofilm, and the tube was practically restored to its clean condition. Treatment with the second of the QACs (fourth generation) allowed for the stabilisation of biofilm growth, but not for its removal. Ecotoxicology studies classified the QACs as environmentally harmless under the testing conditions.     

An automated system for biocide testing on biofilms*

The paper presents and discusses a novel on-line real-time non-destructive continuous-flow system for biocide testing on industrial biofilms. This laboratory system is capable of monitoring changes in growth, accumulation and respiratory activity of biofilms in response to biocidal treatment. The system incorporates a fouling monitor for continuous measuring of the rate of biofilm accumulation (heat transfer resistance), a sensor for monitoring of microbial activity (oxygen meter for monitoring the rate of biofilm respiratory activity), and subsystems necessary for microbial life support and control of operation parameters. Examples of system operation and testing of oxidizing and non-oxidizing biocides are presented. Received 25 May 1997/ Accepted in revised form 25 November 1997     

Importance of porins for biocide efficacy against Mycobacterium smegmatis

Mycobacteria are among the microorganisms least susceptible to biocides but cause devastating diseases, such as tuberculosis, and increasingly opportunistic infections. The exceptional resistance of mycobacteria to toxic solutes is due to an unusual outer membrane, which acts as an efficient permeability barrier, in synergy with other resistance mechanisms. Porins are channel-forming proteins in the outer membrane of mycobacteria. In this study we used the alamarBlue assay to show that the deletion of Msp porins in isogenic mutants increased the resistance of Mycobacterium smegmatis to isothiazolinones (methylchloroisothiazolinone [MCI]/methylisothiazolinone [MI] and octylisothiazolinone [2-n-octyl-4-isothiazolin-3-one; OIT]), formaldehyde-releasing biocides {hexahydrotriazine [1,3,5-tris (2-hydroxyethyl)-hexahydrotriazine; HHT] and methylenbisoxazolidine [N,N'-methylene-bis-5-(methyloxazolidine); MBO]}, and the lipophilic biocides polyhexamethylene biguanide and octenidine dihydrochloride 2- to 16-fold. Furthermore, the susceptibility of the porin triple mutant against a complex disinfectant was decreased 8-fold compared to wild-type (wt) M. smegmatis. Efficacy testing in the quantitative suspension test EN 14348 revealed 100-fold improved survival of the porin mutant in the presence of this biocide. These findings underline the importance of porins for the susceptibility of M. smegmatis to biocides.     

Approaches to prevention, removal and killing of biofilms

Biofilms contribute to hygiene problems in the food industry and in the medical field. Biofilms are diverse and due to the development of special phenotypes, biofilm organisms are not as susceptible to biocides as planktonic microorganisms. Biofilms may be prevented by regular disinfection. Since the attachment of microbes to surfaces and the development of biofilm phenotypes is a very fast process, it is, however, almost impossible, to prevent biofilm formation completely. The removal and killing of established biofilms requires harsh treatments, mostly using oxidising biocides. Depending on the nature of the biofilms, different biocides may be useful and the best biocide for a specific biofilm still has to be determined under practical conditions. Another approach is the prevention of biofilm formation by selection of materials that do not support the attachment of microorganisms. Some materials like glass and stainless steel show less biofilm formation than others. The ranking of materials, however, depends on the conditions, under which they are tested. A novel approach is biofilm inhibition by supplementation of systems with nutrients, to inhibit attachment. First results on inhibition of biofouling in reversed osmosis systems are presented.     

The effects of glutaraldehyde on the control of single and dual biofilms of Bacillus cereus and Pseudomonas fluorescens

Glutaraldehyde (GLUT) was evaluated for control of single and dual species biofilms of Bacillus cereus and Pseudomonas fluorescens on stainless steel surfaces using a chemostat system. The biofilms were characterized in terms of mass, cell density, total and matrix proteins and polysaccharides. The control action of GLUT was assessed in terms of inactivation and removal of biofilm. Post-biocide action was characterized 3, 7, 12, 24, 48 and 72 h after treatment. Tests with planktonic cells were also performed for comparison. The results demonstrated that in dual species biofilms the metabolic activity, cell density and the content of matrix proteins were higher than those of either single species. Planktonic B. cereus was more susceptible to GLUT than P. fluorescens. The biocide susceptibility of dual species planktonic cultures was an average of each single species. Planktonic cells were more susceptible to GLUT than their biofilm counterparts. Biofilm inactivation was similar for both of the single biofilms while dual biofilms were more resistant than single species biofilms. GLUT at 200 mg l(-1) caused low biofilm removal (<10%). Analysis of the post-biocide treatment data revealed the ability of biofilms to recover their activity over time. However, 12 h after biocide application, sloughing events were detected for both single and dual species biofilms, but were more marked for those formed by P. fluorescens (removal >40% of the total biofilm). The overall results suggest that GLUT exerts significant antimicrobial activity against planktonic bacteria and a partial and reversible activity against B. cereus and P. fluorescens single and dual species biofilms. The biocide had low antifouling effects when analysed immediately after treatment. However, GLUT had significant long-term effects on biofilm removal, inducing significant sloughing events (recovery in terms of mass 72 h after treatment for single biofilms and 42 h later for dual biofilms). In general, dual species biofilms demonstrated higher resistance and resilience to GLUT exposure than either of the single species biofilms. P. fluorescens biofilms were more susceptible to the biocide than B. cereus biofilms.     

The effects of disinfectant foam on microbial biofilms

This investigation examined the effects of common aqueous biocides and disinfectant foams derived from them on Pseudomonas aeruginosa biofilms. Biofilms were grown on stainless steel coupons under standardised conditions in a reactor supplemented with low concentrations of organic matter to simulate conditions prevalent in industrial systems. Five-day-old biofilms formed under ambient conditions with continuous agitation demonstrated a low coefficient of variation (5.809%) amongst viable biofilm bacteria from independent trials. Scanning electron microscopy revealed biofilms on coupons with viable biofilm bacteria observed by confocal microscopy. An aqueous solution of a common foaming agent amine oxide (AO) produced negligible effects on bacterial viability in biofilms (p?>?0.05). However, significant biofilm inactivation was noted with aqueous solutions of common biocides (peracetic acid, sodium hypochlorite, sodium ethylenediaminetetraacetic acid) with or without AO (p?<?0.05). Aereation of a mixture of AO with each of these common biocides resulted in significant reductions in the viability of biofilm bacteria (p?<?0.05). In contrast, limited effects were noted by foam devoid of biocides. A relationship between microbial inactivation and the concentration of biocide in foam (ranging from 0.1?–?0.5%) and exposure period were noted (p?<?0.05). Although, lower numbers of viable biofilm bacteria were recovered after treatment with the disinfectant foam than by the cognate aqueous biocide, significant differences between these treatments were not evident (p?>?0.05). In summary, the studies revealed significant biofilm inactivation by biocidal foam prepared with common biocides. Validation of foam disinfectants in controlled trials at manufacturing sites may facilitate developments for clean in place applications. Advantages of foam disinfectants include reductions in the volumes of biocides for industrial disinfection and in their disposal after use.     

Biofilm formation and biocide susceptibility testing of Mycobacterium fortuitum and Mycobacterium marinum

The ability of non-tuberculous mycobacteria to form biofilms may allow for their increased resistance to currently used biocides in medical and industrial settings. This study examines the biofilm growth of Mycobacterium fortuitum and Mycobacterium marinum, using the MBEC trade mark assay system, and compares the susceptibility of planktonic and biofilm cells to commercially available biocides. With scanning electron microscopy, both M. fortuitum and M. marinum form biofilms that are morphologically distinct. Biocide susceptibility testing suggested that M. fortuitum biofilms displayed increased resistance over their planktonic state. This is contrasted with M. marinum biofilms, which were generally as or more susceptible over their planktonic state.     

Analysis of Cell Wall Constituents of Biocide-Resistant Isolates from Dental-Unit Water Line Biofilms

In past years, the significance of microbial resistance to biocides has increased. Twenty biocide-resistant bacterial strains were isolated from dental-unit water line biofilm. All strains resisted high biocide concentrations (up to 100 mug ml(-)1): sodium dodecyl sulphate, hydrogen peroxide, sodium hypochlorite, phenol, Tween 20, ethylenediaminetetraacetic acid, chlorohexidine gluconate, and povidine iodine. Among bacteria, biocide sensitivity is based on permeability of biocides through the cell wall. Gram-positive bacteria are more permeable and susceptible to biocides, whereas Gram-negative bacteria have a more complex cell wall and are the least sensitive bacteria. The present study was designed to study the effect of biocides on the cell wall of biocide-resistant bacteria. Peptidoglycan (PG), diaminopimelic acid (DAP), and teichoic acid contents of the cell wall were determined in L-broth and L-broth supplemented with biocides at different temperatures (37 degrees C and 45 degrees C) and pH levels (7 and 9). In general and Gram staining-specific comparison, a significant increase (p < 0.05) in the DAP content of biocide-resistant bacteria was observed at pH 7 and at both temperatures. In tubing-specific comparison, a significant increase in the amount of teichoic acid in air water tubing (37 degrees C at pH 9) and DAP in patient tubing (pH 7 at both temperatures) was observed. In main water pipe, a significant decrease (p > 0.05) in PG content was noticed at 45 degrees C and pH 9. Overall, a significant increase in DAP content may be an important constituent in the manifestation of isolate resistance against various biocides.