Selenium Levels in the Whole Blood of Children and Teenagers from Two Riparian Communities at the Madeira River Basin in the Western Brazilian Amazon

Selenium (Se) is an essential micronutrient that exerts multiple functions in the organism, and both its deficiency and excess can cause health impairments. Thus, it is important to monitor its levels in the population, especially in vulnerable groups, such as children from the Brazilian Amazon region, where there is a lack of information in this regard. The aim of this research was to study Se levels in the whole blood of children and teenagers (5–16 years old) from two riparian communities at the Madeira River (Cuniã RESEX and Belmont). Se level variations related to the communities’ location, seasonality, diet, and body mass index (BMI) were assessed. Blood samples were collected in both communities for Se determinations, using ICP-MS and hemogram analyses, during May and September of 2011. Food frequency questionnaires were applied to assess consumption rates of specific food items. Non-parametric tests and linear multiple regressions were applied in the data analyses. Median Se levels were significantly higher during May (Cuniã RESEX 149 μg L^?1; Belmont 85 μg L^?1) compared to September (Cuniã RESEX 79 μg L^?1; Belmont 53 μg L^?1). No significant differences were found between the communities regarding BMI measurements and anemia prevalence. However, Se blood levels were significantly higher at the Cuniã RESEX compared to Belmont. In addition, the former showed higher fish and Brazil nut intakes, which may be the main Se sources for this community. These results contribute to a better understanding of Se reference levels for children and teenagers of Western Amazon riparian communities.     

Improvement of 5-aminolevulinic acid production by Rubrivivax benzoatilyticus PS-5 with self-flocculation by co-fermentation of precursors and volatile fatty acids under pH-controlled conditions

Photosynthetic bacteria are known to utilize volatile fatty acids as a carbon source for growth and product formation. In this study, a new isolate, Rubrivivax benzoatilyticus PS-5, possessing self-flocculation properties, was cultivated in modified glutamate-malate (GM) medium containing glutamate and malate as carbon sources. The effect of acetic acid, propionic acid and butyric acid (at 1–4 g L^?1) as co-substrates and 7.5 mM glycine, 10 mM succinic acid as precursors for 5-aminolevulinic acid (ALA) production from R. benzoatilyticus PS-5 was investigated. Among the volatile fatty acids tested, acetic acid was preferred to butyric acid and propionic acid, with the optimum concentrations of 3 g L^?1, 1 g L^?1 and 3 g L^?1, respectively. The highest ALA production was 169.71 μM, 162.16 μM and 46.18 μM, respectively, while the highest productivity was 2.57 μM h^?1, 2.25 μM h^?1 and 0.96 μM h^?1, respectively. The precursor was consumed completely (100 %) while the assimilation of the acetic acid and butyric acid was 62.50 % and 48.65 %, respectively. Supplementation of propionic acid (at 1–4 g l^?1) had a negative effect on growth and ALA production. To increase production efficiency, the pH-control strategy (at pH 6.0–8.0) during fermentation was tested. The optimum pH was 7.0, giving the maximum ALA production of 286.18 μM and a productivity of 3.97 μM h^?1. These values were 1.68-fold and 1.54-fold higher, respectively, than those under uncontrolled pH conditions.     

Kinetics of the aerobic co-metabolism of 1,1-dichloroethylene by Achromobacter sp.: a novel benzene-grown culture

Batch experiments were performed for the aerobic co-metabolism of 1,1-dichloroethylene (1,1-DCE) by Achromobacter sp., identified by gene sequencing of 16S rRNA and grown on benzene. Kinetic models were employed to simulate the co-metabolic degradation of 1,1-DCE, and relevant parameters were obtained by non-linear least squares regression. Benzene at 90 mg L^?1 non-competitively inhibited degradation of 1,1-DCE (from 125 to 1,200 μg L^?1). The maximum specific utilization (k_c) rate and the half-saturation constant (K_c) for 1,1-DCE were 54 ± 0.85 μg h^?1 and 220 ± 6.8 μg L^?1, respectively; the k_b and K_b for benzene were 13 ± 0.18 mg h^?1 and 28 ± 0.42 mg L^?1, respectively. This study provides a theoretical basis to predict the natural attenuation when benzene and 1,1-DCE occur as co-contaminants.     

Determination of Trace Elements in Cow Placenta by Tungsten Coil Atomic Emission Spectrometry

Tungsten coil atomic emission spectrometry (WCAES) is used to determine trace levels of Mn (403.1 nm) and Cr (425.5 nm) in cow placenta. All samples were collected in Ilha Solteira, SP, Brazil. The instrumental setup is based on a tungsten filament extracted from 150 W, 15 V microscope light bulbs, a solid state power supply, fused silica lens, crossed Czerny-Turner spectrograph, and a thermoelectrically cooled charge-coupled device detector. The limits of detection (LOD) and quantification (LOQ) for Cr are 2 and 8 μg L^?1, and 20 and 60 μg L^?1 for Mn, respectively. Recoveries for 0.30 mg L^?1 spikes of each analyte were in the range 93.0–103.0%, and relative standard deviation (RSD) was between 6.50 and 7.20% for both elements. Placenta samples were microwave-assisted digested with diluted HNO₃ and H₂O₂ and analyzed by WCAES. The results for Cr and Mn were compared with values obtained by tandem inductively coupled plasma mass spectrometry (ICP-MS/MS). No statistically significant difference was observed between the different methods by applying a paired t test at a 95% confidence level. The average concentrations of Cr and Mn in the placentas evaluated were 0.95 ± 0.22 and 2.64 ± 0.39 μg g^?1, respectively. By using a short integration time, LODs for Cr and Mn were lower than values reported by recent works using a similar WCAES system.     

Copper and thermal perturbations on the early life processes of the hard coral <Emphasis Type="Italic">Platygyra acuta</Emphasis>

Anthropogenic pollutants and climate change are major threats to coral reefs today. Yet interactions between chemical and thermal perturbations have not been fully explored in reef studies. Here, we present the single and combined effects of copper (Cu) with thermal stress on five early life-history stages/processes (fertilization, larval mortality, swimming ability, metamorphosis and growth of juvenile recruits) of the massive coral Platygyra acuta in Hong Kong. In the first four experiments, coral gametes and larvae were exposed to different Cu doses (0–200 μg L^?1, apart from the fertilization assay in which 0–1000 μg L^?1 was used) and temperature treatments (ambient and ambient +2 or +3 °C as a thermal stress treatment) following a factorial experimental design. Exposure time was 5 h for the fertilization assay and 48 h for the other experiments. The last experiment on growth of coral recruits was conducted over 56 d with 0–80 μg L^?1 Cu used. Cu significantly reduced percent fertilization success, percentage of active swimming larvae and larval survivorship (EC₅₀s, the half maximal effective concentrations, for percent fertilization success and percentage of active swimming larvae were 92–145 and 45–47 μg L^?1 respectively. While LC₅₀, the lethal concentration that kills 50% of the population, was 101–110 μg L^?1), while growth of coral recruits was not affected at 80 μg L^?1 Cu for 56 d. No settling cues were used in the settlement experiment. In their absence, percent metamorphosis increased with Cu doses, in sharp contrast to earlier findings. Settlement and metamorphosis may thus be strategies for coral larvae to escape from Cu toxicity. Thermal treatment did not significantly affect any experimental end points. This is likely because the thermal regimes used in the experiments were within the range experienced by local corals. The high variability in Cu toxicities indicates differential susceptibilities of the various life-history stages/processes of P. acuta. The level of Cu tolerance was also markedly higher than that reported in the literature for other coral species. This provides evidence to suggest possible adaptation of this species to survive in a highly polluted marine environment like that in Hong Kong.     

Modulation of Pb(II) Caused Aortal Constriction by Eugenol and Carvacrol

Exposure to lead is known to cause vasoconstriction, exact mechanism of which remains to be elucidated. In this study, we investigate contractile responses of rat aortal rings equilibrated with Pb(II) in organ bath system, explore pathways responsible for hypercontraction and examine two ameliorators of lead-induced hypercontraction. At 1 μmol L^?1 Pb(II), aortal rings showed an average increase of 50 % in isometric contraction. Incubation of rings, unexposed to Pb(II), with 1 μmol L^?1 sodium nitroprusside (nitric oxide (NO) donor), 100 μmol L^?1 apocynin (reactive oxygen species (ROS) inhibitor), and 100 μmol L^?1 indomethacin (cyclooxygenase inhibitor) lead to decrease in phenylephrine-induced contraction by 31, 27, and 29 %, respectively. This decrease of contraction for Pb(II)-exposed rings was 48, 53, and 38 %, respectively, indicating that ROS- and NO-dependent components of contractions are significantly elevated in Pb(II)-induced hypercontraction. Cyclooxygenase-dependent contractile component did not show significant elevation. Eugenol and carvacrol are plant-derived phenols known to possess antioxidant activity and hence could act as possible ameliorators of hypercontraction. At saturating concentrations of 100 μmol L^?1, eugenol and carvacrol caused a decrease in contraction by 38 and 42 % in unexposed rings and 46 and 50 % in Pb(II)-exposed rings. Co-incubation of rings with eugenol/carvacrol and various inhibitors suggests that both these active principles exert their relaxant effect via quenching of ROS and stimulation of NO synthesis. To conclude, Pb(II) is shown to induce hypercontraction of aortal rings through elevation of ROS and depletion of NO. This hypercontraction is effectively mitigated by eugenol and carvacrol.     

CITRIC ACID PRODUCTION BY Candida SPECIES GROWN ON A SOY-BASED CRUDE GLYCEROL

Citric acid was produced by five species of the yeast Candida after growth on a medium containing soy biodiesel-based crude glycerol. After growth on a medium containing 10 g L^?1 or 60 g L^?1 crude glycerol for 168 hr at 30°C, Candida parapsilosis ATCC 7330 and C. guilliermondii ATCC 9058 produced the highest citric acid levels. On 10 g L^?1 or 60 g L^?1 crude glycerol for 168 hr at 30°C, the citric acid level produced by C. parapsilosis ATCC 7330 was 1.8 g L^?1 or 11.3 g L^?1, respectively, while C. guilliermondii ATCC 9058 produced citric acid concentrations of 3.0 g L^?1 or 10.4 g L^?1, respectively. Biomass production by C. guilliermondii ATCC 9058 on 10 g L^?1 or 60 g L^?1 crude glycerol for 168 hr at 30°C was highest at 1.2 g L^?1 or 6.9 g L^?1, respectively. The citric acid yields observed for C. guilliermondii ATCC 9058 after growth on 10 g L^?1 or 60 g L^?1 crude glycerol (0.35 g g^?1 or 0.21 g g^?1, respectively) were generally higher than for the other Candida species tested. When similar crude glycerol concentrations were present in the culture medium, citric acid yields observed for some of the Candida species utilized in this study were about the same or higher compared to citric acid yields by Yarrowia lipolytica strains. Based on the findings, it appeared that C. guilliermondii ATCC 9058 was the most effective species utilized, with its citric acid production being similar to what has been observed when citric acid-producing strains of Y. lipolytica were grown on crude glycerol under batch conditions that could be of significance to biobased citric acid production.     

A Review of: “North-Holland Publishing Company,Amsterdam, New York,Oxford, 1976; Softbound, 290 pages, $ 19.25.”

Several factors affecting erythritol production from glycerol by Yarrowia lipolytica Wratislavia K1 strain were examined in batch fermentations. Ammonium sulfate, monopotassium phosphate, and sodium chloride were identified as critical medium components that determine the ratio of polyols produced. The central composite rotatable experimental design was used to optimize medium composition for erythritol production. The concentrations of ammonium sulfate, monopotassium phosphate, and sodium chloride in the optimized medium were 2.25, 0.22, and 26.4 g L^?1, respectively. The C:N ratio was found as 81:1. In the optimized medium with 100 g L^?1 of glycerol the Wratislavia K1 strain produced 46.9 g L^?1 of erythritol, which corresponded to a 0.47 g g^?1 yield and a productivity of 0.85 g L^?1 hr^?1. In the fed-batch mode and medium with the total concentration of glycerol at 300 g L^?1 and C:N ratio at 81:1, 132 g L^?1 of erythritol was produced with 0.44 g g^?1 yield and a productivity of 1.01 g L^?1 hr^?1.     

Concentration,Distribution, Source,and Risk Assessment of PAHs and Heavy Metals in Surface Water from the Three Gorges Reservoir,China

Fifteen polycyclic aromatic hydrocarbons (PAHs) and heavy metals (Cr, Ni, As, Cd, Pb, and Hg) were quantified in 19 surface water sites of the Three Gorges Reservoir, China. The total concentrations of 15 PAHs and six heavy metals in the 19 sample sites ranged from 130.8 ng L^?1 to 227.5 ng L^?1 and 3.2 μg L^?1 to 6.0 μg L^?1, respectively. The mean concentration of As was the highest among the six heavy metals (2.1 ± 0.3 μg L^?1), followed by Cr (0.5 ± 0.3 μg L^?1), Ni (1.3 ± 0.1 μg L^?1), Cd (0.2 ± 0.01 μg L^?1), Pb (0.07 ± 0.08 μ g L^?1) and Hg (0.05 ± 0.08 μg L^?1). The isomer ratio results suggest that PAHs at most sites were mainly from petroleum combustion, while coal and biomass combustion was the main source at sites 1, 2, 6, 7, 9, 14, and 17. Based on principal component analysis, the main source of heavy metals was anthropogenic activities and weathering of bedrocks. Depending on characteristic of RQ_(NCs) ≥ 1 and RQ_(MPCs) < 1, BaA showed higher potential ecological risk than other PAHs, therefore, all sampling site needed to be paid much more attention, included some remedial actions. Meanwhile, after assessing human health risk of heavy metal, it was unlikely to experience adverse health effects, even exposing through more pathways and six kinds of heavy metals simultaneously.     

Butanol production from concentrated lactose/whey permeate: Use of pervaporation membrane to recover and concentrate product

In these studies, butanol (acetone butanol ethanol or ABE) was produced from concentrated lactose/whey permeate containing 211 g L^?1 lactose. Fermentation of such a highly concentrated lactose solution was possible due to simultaneous product removal using a pervaporation membrane. In this system, a productivity of 0.43 g L^?1 h^?1 was obtained which is 307 % of that achieved in a non-product removal batch reactor (0.14 g L^?1 h^?1) where approximately 60 g L^?1 whey permeate lactose was fermented. The productivity obtained in this system is much higher than that achieved in other product removal systems (perstraction 0.21 g L^?1 h^?1 and gas stripping 0.32 g L^?1 h^?1). This membrane was also used to concentrate butanol from approximately 2.50 g L^?1 in the reactor to 755 g L^?1. Using this membrane, ABE selectivities and fluxes of 24.4–44.3 and 0.57–4.05 g m^?2 h^?1 were obtained, respectively. Pervaporation restricts removal of water from the reaction mixture thus requiring significantly less energy for product recovery when compared to gas stripping.     

Levels of Metals in Kidney,Liver, and Muscle Tissue and their Influence on the Fitness for the Consumption of Wild Boar from Western Slovakia

Urine lead level is one of the most employed measures of lead exposure and risk. The urine samples used in this study were obtained from ten healthy male cyclists. Dispersive liquid–liquid microextraction combined with ultraviolet and visible spectrophotometry was utilized for preconcentration, extraction, and determination of lead in urine samples. Optimization of the independent variables was carried out based on chemometric methods in three steps. According to the screening and optimization study, 133 μL of CCl₄ (extracting solvent), 1.34 mL ethanol (dispersing solvent), pH 2.0, 0.00 % of salt, and 0.1 % O,O-diethyl dithiophosphoric (chelating agent) were used as the optimum independent variables for microextraction and determination of lead. Under the optimized conditions, R ² was 0.9991, and linearity range was 0.01–100 μg L^?1. Precision was evaluated in terms of repeatability and intermediate precision, with relative standard deviations being <9.1 and <15.3 %, respectively. The accuracy was estimated using urine samples of cyclists as real samples and it was confirmed. The relative error of ≤5 % was considered significant in the method specificity study. The lead concentration mean for the cyclists was 3.79 μg L^?1 in urine samples. As a result, the proposed method is a robust technique to quantify lead concentrations higher than 11.6 ng L^?1 in urine samples.     

An evaluation of phycoremediation potential of cyanobacterium Nostoc muscorum: characterization of heavy metal removal efficiency

The present study relates to the use of cyanobacterium Nostoc muscorum as a model system for removal of heavy metals such as Pb and Cd from aquatic systems. The effects of various physicochemical factors on the surface binding and intracellular uptake of Pb and Cd were studied to optimize the metal removal efficiency of the living cells of N. muscorum. Results demonstrated that a significant proportion of Pb and Cd removal was mediated by surface binding of metals (85 % Pb and 79 % Cd), rather than by intracellular accumulation (5 % Pb and 4 % Cd) at the optimum level of cyanobacterial biomass (2.8 g L^?1), metal concentration (80 μg mL^?1), pH (pH 5.0–6.0), time (15–30 min), and temperature (30–40 °C). N. muscorum has maximum amounts of metal removal (q _max) capacity of 833 and 666.7 mg g^?1 protein for Pb and Cd, respectively. The kinetic parameters of metal binding revealed that adsorption of Pb and Cd by N. muscorum followed pseudo-second-order kinetics, and the adsorption behavior was better explained by both Langmuir and Freundlich isotherm models. The surface binding of both the metals was apparently facilitated by the carboxylic, hydroxyl, and amino groups as evident from Fourier transform infrared spectra.     

<Emphasis Type="Italic">In vitro</Emphasis> sucrose concentration influences microtuber production and diosgenin content in white yam (<Emphasis Type="Italic">Dioscorea rotundata</Emphasis> Poir)

Dioscorea spp. is an important food crop in many countries and the source of the phytochemical diosgenin. Efficient microtuber production could provide source materials for farm-planting stock, for food markets, and for the production of high-diosgenin-producing cultivars. The first step in this study was optimizing the plant growth regulators for plantlet production, followed by a study of the effects of sucrose concentration on microtuber induction and diosgenin production. Significantly, more shoots (3.5) were produced at 4.65 μM (1 mg L^?1) kinetin (KIN), longer shoots (4.1 cm) were obtained at 2.46 μM (0.5 mg L^?1) indole-3-butyric acid (IBA), and root number (3.9) was significantly higher at 5.38 μM (1 mg L^?1) naphthalene acetic acid (NAA) than in other treatments. Increased sucrose concentrations in the optimized growth medium with 4.65 μM KIN and 5.38 μM NAA had significant effects on microtuber production (p < 0.01) and diosgenin content (p < 0.05). The most microtubers (6.2) were obtained with 100 g L^?1 sucrose, while those on 80 g L^?1 sucrose were the heaviest (0.7 g) and longest (7.4 mm). Microtubers formed in medium with 80 g L^?1 sucrose had significantly higher diosgenin content (3.64% [w/w]) than those in other sucrose treatments (< 2%) and was similar to that of field-grown parent tubers (3.79%). This result indicates an important role for sucrose in both microtuber growth and diosgenin production. Medium containing 4.65 μM KIN and 5.38 μM NAA is recommended for plantlet production, and medium containing 80 g L^?1 sucrose is recommended for microtuber and diosgenin production.     

Process Engineering for High-Cell-Density Cultivation of Lipid Rich Microalgal Biomass of <Emphasis Type="Italic">Chlorella</Emphasis> sp. FC2 IITG

In the present study, process engineering strategy was applied to achieve lipid-rich biomass with high density of Chlorella sp. FC2 IITG under photoautotrophic condition. The strategy involved medium optimization, intermittent feeding of limiting nutrients, dynamic change in light intensity, and decoupling growth and lipid induction phases. Medium optimization was performed using combinations of artificial neural network or response surface methodology with genetic algorithm (ANN-GA and RSM-GA). Further, a fed-batch operation was employed to achieve high cell density with intermittent feeding of nitrate and phosphate along with stepwise increase in light intensity. Finally, mutually exclusive biomass and lipid production phases were decoupled into two-stage cultivation process: biomass generation in first stage under nutrient sufficient condition followed by lipid enrichment through nitrogen starvation. The key findings were as follows: (i) ANN-GA resulted in an increase in biomass titer of 157 % (0.95 g L^?1) in shake flask and 42.8 % (1.0 g L^?1) in bioreactor against unoptimized medium at light intensity of 20 μE m^?2 s^?1; (ii) further optimization of light intensity in bioreactor gave significantly improved biomass titer of 5.6 g L^?1 at light intensity of 250 μE m^?2 s^?1; (iii) high cell density of 13.5 g L^?1 with biomass productivity of 675 mg L^?1 day^?1 was achieved with dynamic increase in light intensity and intermittent feeding of limiting nutrients; (iv) finally, two-phase cultivation resulted in biomass titer of 17.7 g L^?1 and total lipid productivity of 313 mg L^?1 day^?1 which was highest among Chlorella sp. under photoautotrophic condition.     

A survey on the occurrence of ochratoxin A in feeds for swine and laying hens

Results of a 2-year (2009–2010) survey on the occurrence of ochratoxin A (OTA) in swine feed and in feed for laying hens in Portugal are reported. A total of 664 samples (478 swine feed, 186 feed for laying hens) were analyzed by a HPLC method using fluorescence detection with 2 μg kg^?1 as detection limit. In swine feed, 31 samples (6.49%) were positive for OTA. In feed for laying hens, 12 samples (6.45%) were OTA-positive. The average levels of contamination were low, with median values of positive samples at 3–4 μg kg^?1 in both years and both commodities, although a few samples contained exceptionally high levels (maximum 130 μg kg^?1). Only the maximum level sample (swine feed) contained OTA at a concentration exceeding the European Commission guidance value. The remaining OTA concentrations found in feed samples were much lower than the guidance values.     

Isolation and characterization of a lead (Pb) tolerant <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> strain HF5 for decolorization of reactive red-120 and other azo dyes

Presence of heavy metals including lead (Pb) in the textile effluents is a crucial factor affecting the growth and potential of the dye decolorizing bacterial strains. This work was planned to isolate and characterize a bacterial strain exhibiting the potential to decolorize a range of azo dyes as well as the resistance to Pb. In this study, several Pb tolerant bacteria were isolated from effluents of textile industry. These bacterial isolates were screened for their potential of decolorizing the reactive red-120 (RR120) azo dye with presence of Pb (50 mg L^?1). The most efficient isolate was further characterized for its potential to resist Pb and decolorize different azo dyes under varying cultural and incubation conditions. Out of the total 82 tested bacterial isolates, 30 bacteria were found to have varying potentials to resist the presence of lead (Pb) and carry out decolorization of an azo dye reactive red-120 (RR120) in the medium amended with Pb (50 mg L^?1). The most efficient selected bacterium, Pseudomonas aeruginosa strain HF5, was found to show a good potential not only to grow in the presence of considerable concentration of Pb but also to decolorize RR120 and other azo dyes in the media amended with Pb. The strain HF5 completely (>?90%) decolorized RR120 in mineral salt medium amended with 100 mg L^?1 of Pb and 20 g L^?1 NaCl. This strain also considerably (>?50%) decolorized RR120 up to the presence of 2000 mg L^?1 of Pb and 50 g L^?1 of NaCl but with reduced rate. The optimal decolorization of RR120 by HF5 was achieved when the pH of the Pb amended (100 mg L^?1) mineral salt media was adjusted at 7.5 and 8.5. Interestingly, this strain also showed the tolerance to a range of metal ions with varying MIC values. The Pseudomonas aeruginosa strain HF5 harboring the unique potentials to grow and decolorize the azo dyes in the presence of Pb is envisaged as a potential bioresource for devising the remediation strategies for treatment of colored textile wastewaters loaded with Pb and other heavy metal ions.     

Kinetics of growth and ethanol formation from a mix of glucose/xylose substrate by Kluyveromyces marxianus UFV-3

The fermentation of both glucose and xylose is important to maximize ethanol yield from renewable biomass feedstocks. In this article, we analyze growth, sugar consumption, and ethanol formation by the yeast Kluyveromyces marxianus UFV-3 using various glucose and xylose concentrations and also under conditions of reduced respiratory activity. In almost all the conditions analyzed, glucose repressed xylose assimilation and xylose consumption began after glucose had been exhausted. A remarkable difference was observed when mixtures of 5 g L^?1 glucose/20 g L^?1 xylose and 20 g L^?1 glucose/20 g L^?1 xylose were used. In the former, the xylose consumption began immediately after the glucose depletion. Indeed, there was no striking diauxic phase, as observed in the latter condition, in which there was an interval of 30 h between glucose depletion and the beginning of xylose consumption. Ethanol production was always higher in a mixture of glucose and xylose than in glucose alone. The highest ethanol concentration (8.65 g L^?1) and cell mass concentration (4.42 g L^?1) were achieved after 8 and 74 h, respectively, in a mixture of 20 g L^?1 glucose/20 g L^?1 xylose. When inhibitors of respiration were added to the medium, glucose repression of xylose consumption was alleviated completely and K. marxianus was able to consume xylose and glucose simultaneously.     

Exposure to aflatoxin B<Subscript>1</Subscript> in Thailand by consumption of brown and color rice

This study assessed the aflatoxin B₁ (AFB₁) intake of the Thai population through consumption of contaminated brown and color rice. A total of 240 rice samples from two harvesting periods were collected in June/July 2012 (period I) and in December 2012/January 2013 (period II) and analyzed for AFB₁ by HPLC with fluorescence detection (limit of detection (LOD)?=?0.093 ng/g). Exposure assessment was based on AFB₁ levels in rice and food intake data for rice according to Thai National Consumption. Frequency and levels of AFB₁ were higher in period I (59 %, <LOD?=?26.61 μg kg^?1) than in period II (10 %, <LOD?=?3.51 μg kg^?1). Only one sample exceeded the Thai standard limit for total aflatoxin of 20 μg kg^?1, but 12 out of 240 rice samples exceeded the European Union maximum level for AFB₁ of 2 μg kg^?1. The data showed that the quality and safety of Thai rice largely comply with the requirement for both exports and domestic consumption. According to the Thai National Consumption data, the estimated AFB₁ intake via rice consumption in period I and period II was 0.80 and 0.12 μg kg^?1 bw day^?1, respectively. The potential risk for cancer, based on the recommendation of the JECFA, was estimated to be 0.011 person/year/100,000 people at a mean consumption. Although the risk via consumption of Thai rice seems to be low, the maximum levels of AFB₁ in this staple food suggest that careful monitoring and surveillance of AFB₁ contamination in rice is essential to ensure the safety of rice.     

Enhancing ethanol production from cellulosic sugars using <Emphasis Type="Italic">Scheffersomyces (Pichia) stipitis</Emphasis>

Studies were performed on the effect of CaCO₃ and CaCl₂ supplementation to fermentation medium for ethanol production from xylose, glucose, or their mixtures using Scheffersomyces (Pichia) stipitis. Both of these chemicals were found to improve maximum ethanol concentration and ethanol productivity. Use of xylose alone resulted in the production of 20.68 ± 0.44 g L^?1 ethanol with a productivity of 0.17 ± 0.00 g L^?1 h^?1, while xylose plus 3 g L^?1 CaCO₃ resulted in the production of 24.68 ± 0.75 g L^?1 ethanol with a productivity of 0.21 ± 0.01 g L^?1 h^?1. Use of xylose plus glucose in combination with 3 g L^?1 CaCO₃ resulted in the production of 47.37 ± 0.55 g L^?1 ethanol (aerobic culture), thus resulting in an ethanol productivity of 0.39 ± 0.00 g L^?1 h^?1. These values are 229 % of that achieved in xylose medium. Supplementation of xylose and glucose medium with 0.40 g L^?1 CaCl₂ resulted in the production of 44.84 ± 0.28 g L^?1 ethanol with a productivity of 0.37 ± 0.02 g L^?1 h^?1. Use of glucose plus 3 g L^?1 CaCO₃ resulted in the production of 57.39 ± 1.41 g L^?1 ethanol under micro-aerophilic conditions. These results indicate that supplementation of cellulosic sugars in the fermentation medium with CaCO₃ and CaCl₂ would improve economics of ethanol production from agricultural residues.     

Influences of the petroleum-recovering activity on the arsenic level in groundwater of Kuitun,Xinjiang, China

Increasing demands of groundwater in petroleum-recovering regions could elevate the level and mobility of arsenic in groundwater as a result of the enhanced dissolution of arsenic-bearing iron or manganese oxide due to the accelerated sulfate reduction by microorganisms in a reductive environment. To substantiate this possibility, groundwater samples were collected from 220 water wells in the nearby petroleum wells in Kuitun. Dissolved arsenic, iron, manganese, and sulfate levels and pH in groundwater samples were analyzed. The dissolved arsenic levels in groundwater varied from <2.3 to 789.4 μg·L^?1, in which approximately 96.4% of the measured values exceeded the allowed limits of the World Health Organization. An inverse relation existed between dissolved arsenic and sulfate levels. Most of the high arsenic-level samples (>300 μg·L^?1) were found in wells at close proximity to petroleum wells where a high iron or manganese level was also detected. The oil-exploring activity in the study region seemed to have enhanced the microbial reduction of sulfate in underground environment and hence the level of arsenic in groundwater. The microbial sulfate reduction coupled with the reduction of arsenic-bearing iron oxides in the groundwater environment may explain the spatial heterogeneity of the arsenic level in groundwater.