DOWN THE TUBE: POLLINATORS, PREDATORS, AND THE EVOLUTION OF FLOWER SHAPE IN THE ALPINE SKYPILOT, POLEMONIUM VISCOSUM

Abstract We address how a conflict between pollinator attraction and avoidance of flower predation influences the evolution of flower shape in Polemonium viscosum. Flower shape in P. viscosum is the product of an isometric relationship between genetically correlated (r_A= 0.70) corolla flare and length. Bumblebee pollinators preferentially visit flowers that are more flared and have longer tubes, selecting for a funnel‐shaped corolla. However, flower shape also influences nectar‐foraging ants that sever the style at its point of attachment to the ovary. Surveys of ant damage show that plants having flowers with flared, short corollas are most vulnerable to ant predation. Consistent with this result, the ratio of corolla length to flare is significantly greater in a krummholz (high predation risk) population than in a tundra (low predation risk) population. To explicitly test whether the evolution of a better defended flower would exact a cost in pollination, we created tubular flowers by constricting the corolla during development. Performance of tubular flowers and natural controls was compared for defensive and attractive functions. In choice trials, ants entered control flowers significantly more often than tubular ones, confirming that the evolution of tubular flowers would reduce the risk of predation. However, in a bumblebee‐pollinated population, tubular flowers received significantly less pollen and set fewer seeds than controls. A fitness model incorporating these data predicts that in the absence of the genetic correlation between corolla length and flare, intermittent selection for defense could allow tubular flowers to spread in the krummholz population. However, in the tundra, where bumblebees account for nearly all pollination, the model predicts that tubular flowers should always confer a fitness disadvantage.     

Upper petal lip colour polymorphism in <Emphasis Type="Italic">Collinsia heterophylla</Emphasis> (Plantaginaceae): genetic basis within a population and its use as a genetic marker

Understanding the genetics of a polymorphic trait is important to predict its likely evolution. In Collinsia heterophylla, the upper petal lip colour can be either be white or white with a purple band, while the lower petal lip colour is invariably purple. Because the corolla is only partly polymorphic, the polymorphism can not have evolved due to a mutation where a pigment was lost in the entire plant, which is common in other polymorphic species. In a previous study, high frequency of the purple band was found in populations with darker flowers, indicating possible selection for this trait. In this study, I determined inheritance of the colour polymorphism using two populations (one with only white morph and other with both morphs). I conducted experimental crosses within and between floral morphs to determine whether patterns of segregation in offspring conform to single-gene predictions. Data from F₁, F₂, F₃ and backcross progeny are consistent with a genetic model of one major locus with presence of the band being completely dominant, as indicated in earlier studies using distantly related populations. A novel finding in this study was that the two morphs did not show a difference in seed germination frequency or seedling survival. This trait can thus be valuable as a genetic marker. Even though more thorough ecological data are needed to understand the potential selection pressures on upper petal lip colour in C. heterophylla, its simple inheritance may indicate the possibility of fast evolutionary response to selective forces acting on this trait.     

Adaptive differentiation in floral traits in the presence of high gene flow in scarlet gilia (Ipomopsis aggregata)

Plant–pollinator interactions are thought to be major drivers of floral trait diversity. However, the relative importance of divergent pollinator‐mediated selection vs. neutral processes in floral character evolution has rarely been explored. We tested for adaptive floral trait evolution by comparing differentiation at neutral genetic loci to differentiation at quantitative floral traits in a putative Ipomopsis aggregata hybrid zone. Typical I. aggregata subsp. candida displays slender white tubular flowers that are typical of flowers pollinated by hawkmoths, and subsp. collina displays robust red tubular flowers typical of flowers pollinated by hummingbirds; yet, hybrid flower morphs are abundant across the East Slope of the Colorado Rockies. We estimated genetic differentiation (F_ST) for nuclear and chloroplast microsatellite loci and used a half‐sib design to calculate quantitative trait divergence (Q_ST) from collection sites across the morphological hybrid zone. We found little evidence for population structure and estimated mean F_ST to be 0.032. Q_ST values for several floral traits including corolla tube length and width, colour, and nectar volume were large and significantly greater than mean F_ST. We performed multivariate comparisons of neutral loci to genetic correlations within and between populations and found a strong signal for divergent selection, suggesting that specific combinations of floral display and reward traits may be the targets of selection. Our results show little support for historical subspecies categories, yet floral traits are more diverged than expected due to drift alone. Non‐neutral divergence for multivariate quantitative traits suggests that selection by pollinators is maintaining a correlation between display and reward traits.     

AN ANATOMICAL BASIS FOR THE DIVERGENT FLORAL FORMS IN THE CLEISTOGAMOUS SPECIES,LAMIUM AMPLEXICAULE L. (LABIATAE)

The pattern of variation in mature corolla form has been documented throughout the main shoot inflorescence of the cleistogamous species Lamium amplexicaule L. A heteroblastic development occurs within the cymose inflorescence at a single node as well as between different nodes. Variation involves an increase in cell number and expansion in the upper corolla and also an increase in cell number in the anther sacs, expressed as pollen count increases, in progressively produced flowers in the inflorescence. The corolla base region in all flowers shows an increased cell expansion from the first produced cleistogamous (CL) flowers to the later produced chasmogamous (CH) flowers which expand at anthesis. Cell numbers are equivalent in the corolla base region of all flowers. It appears that in successively produced flowers in the inflorescence, prolonged cell division and expansion occurs in both the upper corolla region and the anthers until a threshold is reached, at which point flowers may undergo anthesis and become CH. The CL corolla form in Lamium amplexicaule is not caused by a lack of cell expansion alone; rather, both cell division and expansion are arrested in the upper corolla region.     

Cloning of cDNA coding for dihydroflavonol-4-reductase (DFR) and characterization of dfr expression in the corollas of Gerbera hybrida var. Regina (Compositae)

We are approaching corolla differentiation in Compositae by studying the regulation of flavonoid pathway genes during inflorescence development in gerbera. We have cloned a dfr cDNA from a ray floret corolla cDNA library of Gerbera hybrida var. Regina by a PCR technique based on homologies found in genes isolated from other plant species. The functionality of the clone was tested in vivo by complementing the dihydrokaempferol accumulating petunia mutant line RL01. By Southern blot analysis, G. hybrida var. Regina was shown to harbour a small family of dfr genes, one member of which was deduced to be mainly responsible for the DFR activity in corolla. Dfr expression in corolla correlates with the anthocyanin accumulation pattern: it is basipetally induced, epidermally specific and restricted to the ligular part of corolla. By comparing the dfr expression in different floret types during inflorescence development, we could see that dfr expression reflects developmental schemes of the outermost ray and trans florets, contrasted with that of the disc florets.     

Morphogenetic Effects of the Interaction of Floral Mutations Petal-Sepal and Anther in Petal in Papaver somniferumL.

The morphogenetic effects of the interaction of the floral mutations petal-sepal and anther in petal in Papaver somniferumL. with a monocarpic shoot were studied. During analysis of the mutations controlled by the genes ptspand Ant, no plants of the double-mutant class were found in the second generation, in which microsporangia form on the corolla sepal structures. The ratio of phenotypic classes obtained in the experiment corresponds to that inheritance, when the genetic control of mutant characters is realized by nonallele nonlinked genes Antand ptspupon epistatic interaction of these genes. These data were confirmed by analysis of the genotypes of F₂plants from the phenotypic class petal-sepal, which include plants that carry both mutant genes Antand ptsp. The results obtained suggest that the gene Ant, which controls the formation of microsporangia in the corolla metameres, is not expressed in the presence of a mutation of the gene ptsp; i.e., microsporangia are not formed in tissues with photosynthesizing cells. It is evident that the development of microsporangia is determined by the level of a product of the gene Ptsp. The role of flavonols (quercetin), inhibitors of photosynthesis, as a mechanism of regulation of activity of the genes controlling morphogenesis of the corolla elements and differentiation of microsporangia, is discussed.     

Decorative sterile flowers in nine Japanese species of Viburnum (Adoxaceae) and their influence on pollinator visits

Framed inflorescences are unique arrangements in which a cluster of small fertile flowers is surrounded by several larger, decorative sterile flowers. Viburnum (Adoxaceae) species vary in their inflorescence arrangements; some species exhibit framed inflorescences, whereas others do not. We hypothesize that the decorative flowers increase the pollinator-attracting functions of the inflorescences; as proved by previous studies, they additionally function as landing-sites for pollinators. To test our hypotheses, field manipulation experiments were carried out for nine Viburnum species, three with inherently framed inflorescences and six without them: sterile flowers were removed and mounted on species with and without framed inflorescences, respectively. Results show that inflorescences with decorative flowers had higher visit rates than inflorescences without them, and that insect flower visitors did not show landing preference for either flower type. These results suggest that decorative flowers appeared only in a subset of Viburnum species to increase their pollination chances by, mainly, enhancing the attractiveness of the inflorescence. It is likely that species without framed inflorescences use other attraction-enhancing mechanisms, such as a high flowering synchrony within a single cluster of fertile flowers, a trait found in most studied species without decorative flowers.     

Morph‐specific selection on floral traits in a polymorphic plant

Correlations between phenotypic traits are common in many organisms, but the relative importance of nonadaptive mechanisms and selection for the evolution and maintenance of such correlations are poorly understood. In polymorphic species, morphs may evolve quantitative differences in additional characters as a result of morph‐specific selection. The perennial rosette herb Primula farinosa is polymorphic for scape length. The short‐scaped morph is less damaged by grazers and seed predators but is more strongly pollen limited than the long‐scaped morph. We examined whether morph‐specific differences in biotic interactions are associated with differences in selection on two other traits affecting floral display (number of flowers and petal size) and on one trait likely to affect pollination efficiency (corolla tube width) in three P. farinosa populations. Differences in selection between morphs were detected in one population. In this population, selection for more flowers and larger petals was stronger in the short‐scaped than in the long‐scaped morph, and although there was selection for narrower corolla tubes in the short‐scaped morph, no statistically significant selection on corolla tube width could be detected in the long‐scaped morph. In the study populations, the short‐scaped morph produced more and larger flowers and wider corolla tubes. Current morph‐specific selection was thus only partly consistent with trait differences between morphs. The results provide evidence of morph‐specific selection on traits associated with floral display and pollination efficiency, respectively.     

Quantitative trait loci for flowering time and inflorescence architecture in rose

The pattern of development of the inflorescence is an important characteristic in ornamental plants, where the economic value is in the flower. The genetic determinism of inflorescence architecture is poorly understood, especially in woody perennial plants with long life cycles. Our objective was to study the genetic determinism of this characteristic in rose. The genetic architectures of 10 traits associated with the developmental timing and architecture of the inflorescence, and with flower production were investigated in a F ₁ diploid garden rose population, based on intensive measurements of phenological and morphological traits in a field. There were substantial genetic variations in inflorescence development traits, with broad-sense heritabilities ranging from 0.82 to 0.93. Genotypic correlations were significant for most (87%) pairs of traits, suggesting either pleiotropy or tight linkage among loci. However, non-significant and low correlations between some pairs of traits revealed two independent developmental pathways controlling inflorescence architecture: (1) the production of inflorescence nodes increased the number of branches and the production of flowers; (2) internode elongation connected with frequent branching increased the number of branches and the production of flowers. QTL mapping identified six common QTL regions (cQTL) for inflorescence developmental traits. A QTL for flowering time and many inflorescence traits were mapped to the same cQTL. Several candidate genes that are known to control inflorescence developmental traits and gibberellin signaling in Arabidopsis thaliana were mapped in rose. Rose orthologues of FLOWERING LOCUS T (RoFT), TERMINAL FLOWER 1 (RoKSN), SPINDLY (RoSPINDLY), DELLA (RoDELLA), and SLEEPY (RoSLEEPY) co-localized with cQTL for relevant traits. This is the first report on the genetic basis of complex inflorescence developmental traits in rose.     

A Major Gene Conferring Reduced Ethylene Sensitivity and Maleness in Cucurbita pepo

External treatment with ethylene had indicated earlier that this hormone is the main factor controlling sex determination in Cucurbita pepo. Up to now, however, there was no genetic evidence that supported the relationship between ethylene production, or perception, and sexual expression in this species. Here we demonstrate that the extreme male phenotype of the Vegetable Spaghetti (Veg) inbred line of C. pepo subspecies pepo is determined by a major gene that confers reduced ethylene sensitivity in plants. The production of female flowers in the Veg line is very delayed and reduced with respect to the contrasting Bolognese (Bog) line, ranging between 5 and 35% of female flowers per plant. This enhanced maleness trait segregates as a single gene in the F₂ and backcross (BC) generations, and co-segregates with a weak ethylene-insensitive phenotype in the F₂ population, suggesting that the gene responsible for the Veg phenotype could be the result of a mutation in a receptor or response gene for ethylene. Although the etiolated seedlings of the Veg line, and the most androecious plants in the F₂ generation, produce more ethylene than those of the contrasting line, they are less sensitive to this hormone, as indicated by a weaker triple response and a delayed abscission of ethylene-treated male flowers. Given that the sexual phenotype of F₂ plants is correlated with ethylene sensitivity, with the more sensitive plants producing the higher number of female flowers, our results demonstrate that the ethylene response is directly involved in the control of sex determination in C. pepo. It regulates the induction of female flower production, and therefore the extension of the initial phase of development in which the plant produces only male flowers, as well as the number of female flowers per plant.     

不同生境对蝴蝶花花部与果实特征的影响

通过对毛竹林(Bamboo forest,BF)与林缘旷地(Open area of forest edge,OAFE)两类生境蝴蝶花自然种群花部与果实(种子)特征及降雨干扰影响的研究,探讨不同生境中蝴蝶花花部特征适应性及有性各组分的差异。结果表明:(1)竹林生境相对于林缘旷地生境,蝴蝶花单花花冠的长、宽较大,子房、花部(除花柄)及单花总生物量较小,比花柄长较大;两类生境蝴蝶花花柄生物量与子房生物量呈正相关(P0.05),协方差分析表明,两类生境该直线回归的总体斜率间(F=18.420,P0.001)及总体截距间(F=3791.7,P0.001)均具有显著差异,竹林生境花柄生物量随子房生物量增大而增大的程度更强。竹林生境的蝴蝶花侧花花冠长与宽最高,竹林生境顶花次之,林缘旷地顶花与林缘旷地侧花最低;花部(除花柄)与全花重都表现为林缘旷地侧花最高,林缘旷地顶花次之,竹林侧花与竹林顶花最低。比花柄长随竹林侧花与竹林顶花-林缘旷地侧花-林缘旷地顶花依次降低;竹林顶花的花柄比率最高,竹林侧花与林缘旷地侧花最低。(2)林缘旷地生境中蝴蝶花的每花序花数、花序结果百分率、单花结果百分率、每结果花序果实数、每结果花序果实重与种子重及花期内每花序掉落花数都高于竹林生境。(3)林缘旷地生境大雨干扰的4个时段花朵掉落数显著高于竹林环境(P0.01)。不同生境花部形态结构特征表明其自身的生境适应性,林缘旷地生境蝴蝶花为抵御干扰及为获得有性繁殖成功,有性组分的投入更高。     

弯齿盾果草(紫草科)花序及花的形态发生

以弯齿盾果草不同发育时期的花芽为材料,在体视显微镜解剖观察的基础上使用扫描电镜对弯齿盾果草花序、花及果实的发育过程进行了观察。结果显示:(1)弯齿盾果草的花序是由最初的一个球形花序原基经过多次分裂形成的,且花序发生式样符合蝎尾状聚伞花序结构,而非通常所描述的镰状或螺状聚伞花序;花序发生过程中无单一主轴,花序轴是由侧枝连接而成,每一朵花原基有其对应的1枚苞片,下一花原基是从相邻的上一枚苞腋里发生,相邻两花原基交错互生。(2)花器官的发生是按照花萼原基、花冠原基、雄蕊原基和雌蕊原基的顺序发育,但雄蕊原基的花药部分发育速度要比花冠原基快,所以花器官的发育是按照花萼、雄蕊、花冠和雌蕊的顺序发育。(3)子房四深裂结构是由4个原基分别发育,而后相互靠拢而成。(4)小坚果表面的附属结构发生于子房发育后期,其背面的内外层突起分别是由生长较快的外部组织的边缘通过上部内缩和下部向外环状生长形成。     

Deconstructing a floral phenotype: do pollinators select for corolla integration in Lavandula latifolia?

An experimental field study was undertaken to assess whether correlational selection generated by pollinators can account for observed phenotypic integration of the two corolla lips in the zygomorphic flowers of the insect‐pollinated Mediterranean shrub, Lavandula latifolia (Labiatae). The experiment consisted of manipulating the upper and lower corolla lips according to a two‐way factorial design with interaction, and involved the complete (lower lip) or extensive (distal two thirds of upper lip) excision of one or the two lips. Per‐flower male (proportion of pollen grains removed) and female (number of pollen tubes down the style) pollination success, and maternal fecundity (seed set), of experimental flowers were evaluated after exposure to natural pollination in the field. Artificially induced corolla variation had no significant effects on either male or female pollination success, and two aberrant floral morphologies, characterized by lack of corolla integration, had a maternal fecundity advantage over normal two‐lipped phenotypes. These results do not support a predominant role of correlational selection by pollinators in maintaining corolla integration in L. latifolia, but are instead consistent with the alternative view that integration is mainly the consequence of genetic and/or developmental factors.     

Association between inbreeding depression and floral traits in a generalist‐pollinated plant

Individual variation in the magnitude of inbreeding depression (ID) in plants and its association with phenotypic traits may have important consequences for mating system evolution. This association has been investigated only scarcely, and always considering traits functionally related to autogamy. Here, we explore the association between individual variation in ID and plant traits associated with pollinator attractiveness (related to plant size, corolla size and corolla shape) in two populations of Erysimum mediohispanicum (Brassicaceae). ID was calculated along the entire life cycle of the plants. In addition, we also explored the relationship between phenotypic traits and the individual levels of heterozygosity. We found significant associations between ID and corolla diameter and stalk height, being taller plants with larger corollas those undergoing a lower intensity of ID. Furthermore, we found a negative relationship between corolla diameter and heterozygosity, suggesting that plants with large flowers have purged their genetic load. Finally, we found a significant effect of corolla diameter on the intrapopulation genetic structure. All these findings suggest that plants with large flowers have secularly suffered frequent inbreeding in the study populations. Because corolla diameter is a trait frequently selected by pollinators in E. mediohispanicum, we believe that the observed relationship between this trait and ID could be mediated by pollinators, probably throughout an increasing in biparental inbreeding, geitonogamy or autogamy.     

Genetic variation for sexual dimorphism in flower size within and between populations of gynodioecious Thymus vulgaris

There has been very little empirical study of quantitative genetic variation in flower size in sexually dimorphic plant species, despite the frequent occurrence of flower size differences between sexual phenotypes. In this study we quantify the nature of quantitative flower size variation in females and hermaphrodites of gynodioecious Thymus vulgaris. In a field study, females had significantly smaller flowers than hermaphrodites, and the degree of flower size dimorphism varied significantly among populations. To quantify the genetic basis of flower size variation we sampled maternal progeny from 10 F₀ females in three populations (across the range of variation in flower size in the field), performed controlled crosses on F₁ offspring in the glasshouse and grew F₂ progeny to flowering in uniform field conditions. A significant population * sex interaction was again observed, hence the degree of sexual dimorphism shows genetic variation among populations. A significant family * sex interaction was also observed, indicating that the degree of sexual dimorphism shows genetic variation among families. Females showed significantly greater variation among populations and among families than hermaphrodites. Female flower size varied significantly depending on the degree of stamen abortion, with morphologically intermediate females having flowers more similar to hermaphrodites than to other females. The frequency of female types that differ in the degree of stamen abortion varied among populations and families and mean family female flower size increased as the proportion of intermediate female types increased across families. Variation in the degree of flower size dimorphism thus appears to be a result of variation in the degree of stamen abortion in females, the potential causes of which are discussed.     

EFFECTS OF WATER STRESS,ABSCISIC ACID,AND GIBBERELLIC ACID ON FLOWER PRODUCTION AND DIFFERENTIATION IN THE CLEISTOGAMOUS SPECIES COLLOMIA GRANDIFLORA DOUGL. EX LINDL. (POLEMONIACEAE)

The effects of water stress, abscisic acid (ABA), and gibberellic acid (GA₃) on flower production and differentiation by Collomia grandiflora were investigated. An untreated plant typically produced both small, closed cleistogamous (CL) and large, open chasmogamous (CH) flowers. The larger corolla of CH flowers was due to a greater cell number and size. When plants were water-stressed or sprayed with ABA, both the percentage of CH flowers and the total number of flowers were reduced significantly. The corolla dimensions and epidermal cell numbers and sizes of CL flowers produced by water-stressed and ABA-sprayed plants did not differ from those of CL flowers produced by control plants. Application of GA₃ to both well-watered and water-stressed plants significantly increased the percentage of CH flowers formed compared to well-watered controls. In the absence of GA₃, water-stressed plants produced almost entirely CL flowers. GA₃-sprayed plants produced CH flowers whose corolla dimensions were intermediate between those of CL and CH flowers formed by control plants. Epidermal cells of these intermediate corollas were reduced only in number and not in size when compared to control CH flowers. Endogenous levels of ABA and gibberellins may control the type of flower produced by C. grandiflora and may mediate some of the observable effects of water stress on flowering.     

Quantitative trait loci analysis of phenotypic traits and principal components of maize tassel inflorescence architecture

Maize tassel inflorescence architecture is relevant to efficient production of F₁ seed and yield performance of F₁ hybrids. The objectives of this study were to identify genetic relationships among seven measured tassel inflorescence architecture traits and six calculated traits in a maize backcross population derived from two lines with differing tassel architectures, and identify Quantitative Trait Loci (QTL) involved in the inheritance of those tassel inflorescence architecture traits. A Principal Component (PC) analysis was performed to examine relationships among correlated traits. Traits with high loadings for PC1 were branch number and branch number density, for PC2 were spikelet density on central spike and primary branch, and for PC3 were lengths of tassel and central spike. We detected 45 QTL for individual architecture traits and eight QTL for the three PCs. For control of inflorescence architecture, important QTL were found in bins 7.02 and 9.02. The interval phi034—ramosa1 (ral) in bin 7.02 was associated with six individual architecture trait QTL and explained the largest amount of phenotypic variation (17.3%) for PC1. Interval bnlg344–phi027 in bin 9.02 explained the largest amount of phenotypic variation (14.6%) for PC2. Inflorescence architecture QTL were detected in regions with candidate genes fasciated ear2, thick tassel dwarf1, and ral. However, the vast majority of QTL mapped to regions without known candidate genes, indicating positional cloning efforts will be necessary to identify these genes.