Polyester Biosynthesis Characteristics of Pseudomonas citronellolis Grown on Various Carbon Sources, Including 3-Methyl-Branched Substrates

Forty-two different carbon sources were tested for the polyester synthesis of a citronellol-utilizing bacterium, Pseudomonas citronellolis (ATCC 13674). These included linear C₂ to C₁₀ monocarboxylic acids, C₃ to C₁₀ dicarboxylic acids, saccharides, α,ω-diols, hydrocarbons, and 3-methyl-branched substrates such as 3,7-dimethyl-6-octen-1-ol (citronellol), 3-methyl-n-valerate, 3-methyl-1-butanol, and 3-methyladipate. Isolated polymers were characterized by gas chromatography, infrared spectroscopy, ¹H- or ¹³C-nuclear magnetic resonance spectroscopy, ¹H-¹³C heteronuclear correlation spectroscopy (¹H-¹³C COSY), ¹H-¹H homonuclear COSY, and differential scanning calorimetry. Polyesters from nine monocarboxylic acids and two related carbon sources could be metabolically divided into three groups. The first group of C₂ to C₄ carbon sources resulted in copolyesters composed of 61 to 70 mol% 3-hydroxydecanoate, 23 to 33 mol% 3-hydroxyoctanoate, 3.6 to 9.0 mol% 3-hydroxy-5-cis-dodecenoate, and 1.8 to 2.6 mol% 3-hydroxy-7-cis-tetradecenoate. Carbon sources in group II (C₇ to C₁₀) produced copolyesters composed of 3-hydroxyacid monomer units with the same number of carbon atoms as the substrate (major constituent) and monomer units with either two less or two more carbons. Negligible amounts of 3-hydroxy-5-cis-dodecenoate and 3-hydroxy-7-cis-tetradecenoate were detected in copolyesters from this group. Copolyesters from group III (C₅ and C₆) had a monomer unit distribution that could be said to be between those of groups I and II. In addition, a novel copolyester, poly(3-hydroxy-7-methyl-6-octenoate-co-3-hydroxy-5-methylhexanoate), was synthesized when grown on citronellol. The ¹H-¹³C heteronuclear COSY spectrum for monomer unit II revealed that both methylene and isopropyl groups, proximately connected in series to a single chiral center, had magnetically diastereotopic natures.     

A Pseudomonas strain accumulating polyesters of 3-hydroxybutyric acid and medium-chain-length 3-hydroxyalkanoic acids

Summary A citronellol-utilizing bacterium was isolated that accumulated a polyester consisting of 3-hydroxybutyric acid (3HB) and of medium-chain-length 3-hydroxyalkanoic acids (3HA_MCL) from various carbon sources up to approximately 70% of the cellular dry matter if the cells were cultivated in ammineral salts medium under nitrogen limitation. In octanoate-grown cells, for instance, the polyester consisted of 87.5 mol% 3HB and 12.5 mol% 3-hydroxyoctanoic acid (3HO), whereas it consisted of 10.3 mol% 3HB, 16.7 mol% 3HO and 73.0 mol% 3-hydroxydecanoic acid (3HD) in gluconate-grown cells. However, the results of various experiments indicated that a blend rather than a copolyester was synthesized in the cell. It was the only strain among 45 different recently isolated citronellol-utilizing bacteria that accumulated such a polyester. All other citronellol-utilizing bacteria behaved like Pseudomonas aeruginosa with respect to their polyhydroxyalkanoic acid (PHA) biosynthetic capabilities and accumulated PHA consisting of 3HA_MCL with 3HO and 3HD as the main constituents from octanoate or gluconate, respectively, whereas 3HB was never present. None of 232 different heavy-metal-resistant bacteria was able to accumulate PHA composed of 3HB plus, for example, 3HO. Only 20.3% did not accumulate any PHA at all, 44.8% accumulated PHB from gluconate, and 34.9% behaved like P. aeruginosa. Many bacteria belonging to the latter group were distinguished from the other by rapid growth in nutrient broth and in gluconate mineral salts medium and by their ability to grow in the presence of a high concentration (up to 1.5%, w/v) of octanoate. Correspondence to: A. Steinbüchel     

Cometabolic biosynthesis of copolyesters consisting of 3-hydroxyvalerate and medium-chain-length 3-hydroxyalkanoates by Pseudomonas sp. DSY-82

A newly isolated strain, designated as Pseudomonas sp. DSY-82, synthesized medium-chain-length polyhydroxyalkanoate (MCL-PHA) copolyesters when grown on alkanoates from hexanoate to undecanoate as the sole carbon source. When used alone, butyrate and valerate supported the growth of the isolate but not PHA production. However, unusual polyesters containing 3-hydroxyvalerate, as well as various MCL 3-hydroxyalkanoate monomeric units, were synthesized when valerate was cofed with either nonanoate or 10-undecenoate, suggesting the formation of monomer units from both substrates. Concentrations of 3-hydroxyvalerate, 3-hydroxyoctanoate, and 3-hydroxydecanoate in the PHAs produced were significantly elevated by the addition of valerate, indicating that the incorporation of these monomer units to PHA occurred primarily through cometabolism. The total amount of these monomer units in the PHAs reached up to 30%. The PHAs produced in this study were most likely random copolyesters as determined by differential scanning calorimetric analysis. This is the first case of microbial synthesis of copolyesters consisting of 3-hydroxyvalerate and MCL 3-hydroxyalkanoate monomer units through cometabolism.     

Syntheses and physical characterization of new aliphatic triblock poly(L-lactide-b-butylene succinate-b-L-lactide)s bearing soft and hard biodegradable building blocks

This study presents chemical syntheses and physical characterization of a new aliphatic poly(L-lactide-b-butylene succinate-b-L-lactide) triblock copolyester with soft and hard biodegradable building blocks. First, poly(butylene succinate) (PBS) prepolymers terminated with hydroxyl functional groups were synthesized through melt polycondensation from succinic acid and 1,4-butanediol. Further, a series of new PLLA-b-PBS-b-PLLA triblock copolyesters bearing various average PLLA block lengths were prepared via ring opening polymerization of L-lactide with the synthesized hydroxyl capped PBS prepolymer (Mn = 4.9 KDa) and stannous octanoate as the macroinitiator and catalyst, respectively. By means of GPC, NMR, FTIR, DSC, TGA, and wide-angle X-ray diffractometer (WAXD), the macromolecular structures and physical properties were intensively studied for these synthesized PBS prepolymer and PLLA-b-PBS-b-PLLA triblock copolyesters. 13C NMR and GPC experimental results confirmed the formation of sequential block structures without any detectable transesterification under the present experimental conditions, and the molecular weights of triblock copolyesters could be readily regulated by adjusting the feeding molar ratio of L-lactide monomer to the PBS macroinitiator. DSC measurements showed all single glass transitions, and their glass transition temperatures were found to be between those of PLLA and PBS, depending on the lengths of PLLA blocks. It was noteworthy that the segmental flexibilities of the hard PLLA blocks were found to be remarkably enhanced by the more flexible PBS block partner, and the PBS and PLLA building blocks were well mixed in the amorphous regions. Results of TGA analyses indicated that thermal degradation and stabilities of the PLLA blocks strongly depended on the average PLLA block lengths of triblock copolyesters. In addition, FTIR and WAXD results showed the coexistence of the assembled PLLA and PBS crystal structures when the average PLLA block length became larger than 7.8. These results may be beneficial for this new biodegradable aliphatic triblock copolyester to be applied as a potential biomaterial.     

Viscoelastic relaxations and thermal properties of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

3-Hydroxybutyrate-3-hydroxyvalerate (3HB-3HV) as well as 3-hydroxybutyrate-4-hydroxybutyrate (3HB-4HB) copolyesters have been investigated by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical spectroscopy, over a wide range of compositions (0-95 mol% 3HV; 0-82 mol% 4HB). Both series of isolated copolyesters are partially crystalline at all compositions. Quenched samples show a glass transition that decreases linearly with increasing co-monomer molar fraction, more markedly when the co-monomer is 4HB. Above Tg, all copolyesters, rich in 3HB units, show a cold crystallization phenomenon followed by melting, while at the other end crystallization on heating is observed only in 3HB-3HV copolymers. The viscoelastic spectrum, strongly affected by thermal history, shows two relaxation regions: the glass transition, whose location depends on copolymer type and composition, and a secondary dispersion region at low temperatures (-130/-80 degrees C). The latter results from a water-related relaxation analogous to that of P(3HB) and, in 3HB-4HB copolymers, from another overlapping absorption peak centered at -130 degrees C, attributed to local motion of the methylene groups in the linear 4HB units.     

Design,synthesis, and properties of new biodegradable aromatic/aliphatic liquid crystalline copolyesters

Liquid crystalline copolyesters of high molecular weight were obtained by polycondensation of aromatic diols, diacyl dichlorides, oligolactides, and poly(ethylene glycol)s. Hydrophilicity of the copolyesters was controlled by the content of ethyleneoxy moieties as verified by contact angle measurements. Copolyesters with ethyleneoxy moieties showed significant enhancement of degradability under physiological conditions in comparison to copolyester without ethyleneoxy moieties, which makes these copolyesters promising materials for bone tissue engineering as also verified by hardness testing and mechanical testing.     

Side-chain effect of second monomer units on crystalline morphology, thermal properties, and enzymatic degradability for random copolyesters of (R)-3-hydroxybutyric acid with (R)-3-hydroxyalkanoic acids

Three types of random copolymers with 94 mol % (R)-3-hydroxybutyric acid (3HB) and 6 mol % (R)-3-hydroxyalkanoic acids with different side-chain lengths, (R)-3-hydroxypentanoic acid (3HV), (R)-3-hydroxyhexanoic acid (3HHx), and medium-chain-length (R)-3-hydroxyalkanoic acids (mcl-3HA, C8-C12), were prepared by biological synthetic techniques. The solid-state structure and thermal properties of melt-crystallized films for copolymers were characterized by means of wide-angle X-ray diffraction, small-angle X-ray scattering, differential scanning calorimetry, and optical microscopy. The randomly distributed second monomer units, except for 3HV in copolyesters, act as defects of the P(3HB) crystal and are excluded from the P(3HB) crystalline lamellae. The lamellar thickness of copolymers decreased with an increase in the side-chain length of second monomer units. In addition, the growth rate of spherulites decreased with an increase in the carbon numbers of second monomer units at an identical crystallization temperature. These results indicate that a steric bulkiness of the second monomer unit affects the crystallization of (R)-3HB segments in random copolyesters. An enzymatic degradation test of melt-crystallized copolymer films was carried out in the presence of PHB depolymerase from Alcaligenes faecalis T1. Erosion rate of copolyesters was dependent on both the crystallinity and the lamellar thickness of samples. As the result, the rate of enzymatic degradation for copolymer films increased with an increase in the carbon numbers of second monomer units.     

Biosynthesis of novel copolyesters containing 3-hydroxypivalic acid by Rhodococcus ruber NCIMB 40126 and related bacteria

Rhodococcus ruber and related Gram-positive bacteria synthesized and accumulated novel copolyesters containing 3-hydroxypivalic acid as constituent if the cells were cultivated in a mineral salts medium containing 3-hydroxypivalic acid and glucose as carbon sources. The copolyesters contributed 0.4–10% of the cellular dry mass, and they contained up to 78 mol% of 3-hydroxypivalic acid in addition to 3-hydroxybutyric acid and 3-hydroxyvaleric acid; a homopolyester of 3-hydroxypivalic acid was also synthesized under certain conditions. The presence of 3-hydroxypivalic acid in the accumulated copolyesters was confirmed by nuclear magnetic resonance spectrometry as well by coupled gas chromatography/mass spectrometry. This is the first time that the incorporation of 3-hydroxypivalic acid and therefore of a hydroxyalkanoic acid with two methyl group substituents at the α-carbon atom in a naturally occurring copolyester is reported. It indicates that 3-hydroxypivalic acid-coenzyme A is accepted by polyhydroxyalkanoic acid synthase as a substrate.     

Benzene containing polyhydroxyalkanoates homo- and copolymers synthesized by genome edited Pseudomonas entomophila

Microbial synthesis of functional polymers has become increasingly important for industrial biotechnology.For the first time,it became possible to synthesize controllable composition of poly(3-hydroxyalkanoate)(P3HA)consisting of 3-hydroxydodecanoate(3HDD)and phenyl group on the side-chain when chromosome of Pseudomonas entomophila was edited to weaken itsβ-oxidation.Cultured in the presence of 5-phenylvaleric acid(PVA),the edited P.entomophila produced only homopolymer poly(3-hydroxy-5-phenylvalerate)or P(3HPhV).While copolyesters P(3HPhV-co-3HDD)of 3-hydroxy-5-phenylvalerate(3HPhV)and 3-hydroxydodecanoate(3HDD)were synthesized when the strain was grown on mixtures of PVA and dodecanoic acid(DDA).Compositions of 3HPhV in P(3HPhV-co-3HDD)were controllable ranging from 3%to 32%depending on DDDA/PVA ratios.Nuclear magnetic resonance(NMR)spectra clearly indicated that the polymers were homopolymer of P(3HPhV)and random copolymers of 3HPhV and 3HDD.Their mechanical and thermal properties varied dramatically depending on the monomer ratios.Our results demonstrated the possibility to produce tailor-made,novel functional PHA using the chromosome edited P.entomophila.     

Kinetics of medium-chain-length polyhydroxyalkanoate production by a novel isolate of Pseudomonas putida LS46

Six bacteria that synthesize medium-chain-length polyhydroxyalkanoates (mcl-PHAs) were isolated from sewage sludge and hog barn wash and identified as strains of Pseudomonas and Comamonas by 16S rDNA gene sequencing. One isolate, Pseudomonas putida LS46, showed good PHA production (22% of cell dry mass) in glucose medium, and it was selected for further studies. While it is closely related to other P.?putida strains (F1, KT2440, BIRD-1, GB-1, S16, and W619), P.?putida LS46 was genetically distinct from these other strains on the basis of nucleotide sequence analysis of the cpn60 gene hypervariable region. PHA production was detected as early as 12?h in both nitrogen-limited and nitrogen-excess conditions. The increase in PHA production after 48?h was higher in nitrogen-limited cultures than in nitrogen-excess cultures. Pseudomonas?putida LS46 produced mcl-PHAs when cultured with glucose, glycerol, or C(6)-C(14) saturated fatty acids as carbon sources, and mcl-PHAs accounted for 56% of the cell dry mass when cells were batch cultured in medium containing 20?mmol/L octanoate. Although 3-hydroxydecanoate was the major mcl-PHA monomer (58.1-68.8?mol%) in P.?putida LS46 cultured in glucose medium, 3-hydroxyoctanoate was the major monomer produced in octanoate medium (88?mol%).     

Shifting of the distribution of aromatic monomer-units in polyhydroxyalkanoic acid to longer units by salicylic acid in Pseudomonas fluorescens BM07 grown with mixtures of fructose and 11-phenoxyundecanoic acid

Medium-chain-length-polyhydroxyalkanoic acids (MCL-PHAs) formed in Pseudomonas spp. have a rather broad distribution of monomer-units whose precursors are supplied via beta-oxidation degradation of MCL fatty acids fed as the carbon source and/or via PhaG enzyme catalyzing the acyl-group transfer from 3-hydroxyacyl-ACPs derived from acetyl-CoA to coenzyme A. It was found that salicylic acid (SA), in a concentration dependent manner, suppressed the accumulation of PHA in Pseudomonas fluorescens BM07 from fructose as well as shifted the distribution of monomer-units derived from a MCL fatty acid co-added as carbon source (e.g., 11-phenoxyundecanoic acid (11-POU)) to longer monomer-units. Both SA and acrylic acid were found to induce high accumulations of 3-ketohexanoic acid in BM07 wild-type cells grown with n-hexanoic acid as well as to inhibit the formation of acetyl-CoA from acetoacetyl-CoA by BM07 cell extract, suggesting that 3-ketoacyl-CoA thiolase is their common beta-oxidation target. The structural motif of acrylic acid present in the molecular structure of SA may self-explain the similar actions of the two inhibitors. A comparison of monomer modulation between BM07 wild-type and DeltaphaG mutant cells grown on the mixtures of fructose and 11-POU revealed that both PhaG and beta-oxidation inhibitor may play a critical role in the synthesis of PHA with longer side-chain omega-functional substitutions.     

Molecular cloning and functional analysis of two polyhydroxyalkanoate synthases from two strains of Aeromonas hydrophila spp

Polyhydroxyalkanoate (PHA) synthase genes (phaC) were cloned from two Aeromonas hydrophila strains named WQ and 4AK5, respectively. Both strains are able to produce PHBHHx copolyesters consisting of 3-hydroxybutyrate (3HB) and 3-hydroxyhexanoate (3HHx). Sequence analysis showed that there was only 2 bp difference between these two PHA synthase genes, corresponding to two-amino acid difference at positions of 437 and 458 of the two synthases. PHA productivity and its monomer content produced by A. hydrophila WQ and A. hydrophila 4AK5 were quite different. A. hydrophila WQ accumulated 33% PHBHHx of its cell dry weight (CDW) with 5 mol% 3HHx in the copolyester when cultured in lauric acid for 48 h. Yet A. hydrophila 4AK5 was able to produce 43% PHBHHx of the CDW with 14 mol% 3HHx under the same condition. Hetero-expression of PHA synthase genes of A. hydrophila WQ and A. hydrophila 4AK5, respectively, in Escherichia coli XL1-Blue led to PHBHHx accumulation of 24% and 39% of the CDW and the 3HHx content in PHBHHx were 6 and 15 mol%, respectively. This indicated that the function of these two PHA synthases were different due to these two different residues at positions of 437 and 458. Site specific mutation was carried out to change these two amino acid residues. Results showed that the changes on either of the two amino acids negatively affected the PHA productivity.     

Production of poly(3-hydroxyalkanoates-co-3-hydroxy-ω-fluoroalkanoates) byPseudomonas oleovorans from 1-fluorononane and gluconate

Summary Pseudomonas oleovorans grew well and synthesized copolyesters of 3-hydroxyalkanoates and 3-hydroxy--fluoroalkanoates in the mineral medium containing 1-fluorononane and sodium gluconate. The content of fluorinated units in copolyesters could be controlled from 0 to 40 mol%. The copolyesters were shown to have a random sequence distribution of different monomeric units by analysis of the¹³C NMR spectra. The melting temperatures of copolyesters were 52–58°C, and the enthalpy of fusion decreased with the content of fluorinated units.     

Hydrolytic and enzymatic degradation of liquid-crystalline aromatic/aliphatic copolyesters

Aromatic/aliphatic copolyesters containing hydrophilic moieties in the main chain or side chain were synthesized by bulk polycondensation of aromatic monomers without or with solubilizing substituents and aliphatic monomers. Hydrolytic and enzymatic degradation studies were carried out in vitro at 37 degrees C in pH 7.4 phosphate buffer and in Tris-HCl buffer containing proteinase K. The results indicate that liquid-crystalline aromatic/aliphatic copolyesters are degradable hydrolytically as well as enzymatically. The change in composition and morphology of the polyester films were monitored by nuclear magnetic resonance and scanning electron microscopy. The results suggested that aromatic species and aliphatic moieties could be released into aqueous solution during hydrolytic degradation of aromatic/aliphatic copolyesters with ethyleneoxy groups on the side chain. Modifying aromatic species with hydrophilic groups in aromatic/aliphatic copolyesters was an efficient method to improve degradability and biocompatibility due to improved solubility of degradation products in aqueous solution. Mechanical tests indicated that the copolyesters exhibited good mechanical properties prior to degradation, which can be of relevance for bone tissue engineering.     

Structure and polymer form of poly-3-hydroxyalkanoates produced by Pseudomonas oleovorans grown with mixture of sodium octanoate/undecylenic acid and sodium octanoate/5-phenylvaleric acid

PHAs (poly-3-hydroxyalkanoates) obtained by Pseudomonas oleovorans grown with mixed carbon sources were investigated. Mixed carbon sources were sodium octanoate/undecylenic acid and sodium octanoate/5-phenylvaleric acid. Effect of carbon source in pre-culture on PHAs structure was investigated. Main fermentation was conducted with mixture of sodium octanoate/undecylenic acid, and PHA contained both saturated and unsaturated units. When more undecylenic acid was used in the medium, the ratio of unsaturated unit increased and the T(g) of the products also changed. The PHA grown with mixture of sodium octanoate and undecylenic acid was a random copolymer, which was determined by DSC analysis. Using mixed carbon sources of sodium octanoate and 5-phenylvaleric acid, highest dry cell weight and PHA concentration were obtained when 0.02g or 0.04g of 5-phenylvaleric acid were added in 50mL medium. Cultured with sodium octanoate and 5-phenylvaleric acid, PHA containing HO (3-hydroxyoctanoate) unit and HPV (3-hydroxy-5-phenylvalerate) unit was produced. T(g) of the products fell between those of pure PHO and pure PHPV. By means of DSC analysis and fractionation method, the PHA obtained was regarded as a random copolymer.     

Formation of poly(3-hydroxyalkanoates) by phototrophic and chemolithotrophic bacteria

The formation of poly(3-hydroxyalkanoic acid), PHA, by various strains of chemolithotrophic and phototrophic bacteria has been examined. Chemolithotrophic bacteria were grown aerobically under nitrogen-limiting conditions on various aliphatic organic acids. Phototrophic bacteria were grown anaerobically in the light on a nitrogen-rich medium and were subsequently transferred to a nitrogen-free medium containing acetate, propionate, valerate, heptanoate or octanoate as carbon source. All 41 strains investigated in this study were able to synthesize and accumulate PHA. All 11 strains of chemolithotrophic bacteria and all 15 strains belonging to the non-sulfur purple bacteria synthesized a polymer, which contained 3-hydroxy-valerate (3HV) beside 3-hydroxybutyrate (3HB), if the cells were cultivated in the presence of propionate, valerate or heptanoate. Many non-sulfur purple bacteria synthesized copolyesters of 3HB and 3HV even with acetate as carbon source. In contrast, most sulfur purple bacteria did not incorporate 3HV at all. Among 15 strains tested, only Chromatium vinosum strain 1611, C. purpuratum strain BN5500 and Lamprocystis roseopersicina strain 3112 were able to synthesize polyesters containing 3HV with propionate, valerate or heptanoate as carbon source.     

Formation of short chain length/medium chain length polyhydroxyalkanoate copolymers by fatty acid beta-oxidation inhibited Ralstonia eutropha

Ralstonia eutropha has been considered as a bacterium, incorporating hydroxyalkanoates of less than six carbons only into polyhydroxyalkanoates (PHAs). Cells of the wild type cultivated with sodium octanoate as the carbon source in the presence of the fatty acid beta-oxidation inhibitor sodium acrylate synthesized PHAs composed of the medium chain length hydroxyalkanoates (3HA(MCL)) 3-hydroxyhexanoate (3HHx) and 3-hydroxyoctanoate (3HO) as well as of 3-hydroxybutyrate and 3-hydroxyproprionate as revealed by gas chromatography, (1)H NMR spectroscopy, and mass spectroscopy. The characterization of the polymer as a tetrapolymer was confirmed by differential solvent extraction and measurement of melting and glass transition temperature depression in the purified polymer compared to PHB. These data suggested that the R. eutropha PHA synthase is capable of incorporating longer chain substrates than suggested by previous in vitro studies. Furthermore, expression of the class II PHA synthase gene phaC1 from P. aeruginosa in R. eutropha resulted in the accumulation of PHAs consisting of 3HA(MCL) contributing about 3-5% to cellular dry weight. These PHAs were composed of nearly equal molar fractions of 3HO and 3-hydroxydecanoate (3HD) with traces of 3HHx. These data indicated that 3HA(MCL)-CoA thioesters were diverted from the fatty acid beta-oxidation pathway towards PHA biosynthesis in recombinant R. eutropha.     

Physicochemical properties of two-component polyhydroxyalkanoates based on 3-hydroxybutyrate and 3-hydroxyvalerate

A series of two-component polyhydroxyalkanoates consisting of hydroxybutyrate and hydroxyvalerate monomer at different ratios were synthesized using the bacterium Ralstonia eutropha B5786. The properties of polyhydroxyalkanoates were compared with those of the homopolymer of hydroxybutyric acid by X-ray structure analysis, IR spectroscopy, differential scanning calorimetry, and viscosimetry. With an increase in the molar fraction of hydroxyvalerate, an equalization of the ratio of the crystalline and amorphous phases in the copolymer was observed. The degree of crystallinity of the polymer decreased from 70-80 to 45-50%; in the range of an increase in the hydroxyvalerate molar fraction from several to 25-30 mol%, the dependence was linear. The temperature characteristics, the melting temperature (T(m)), and the degradation temperature (T(d)) were lower in polyhydroxyalkanoates than in polyhydroxybutyrate, for which T(m) and T(d) were 168-170 and 260-265 degrees C, respectively. In the copolymer, as the molar fraction of hydroxyvalerate grew, both parameters decreased. In the range of variation of monomer ratio studied, they decreased to 150-160 and 200-220 degrees C, respectively. No distinct correlation between the composition of the polymer and its molecular mass was found.     

Folylpoly-gamma-glutamates as cosubstrates of 10-formyltetrahydrofolate:5'-phosphoribosyl-5-amino-4-imidazolecarboxamide formyltransferase.

N10-Formyltetrahydropteroylpoly-gamma-glutamates (N10-formyl-H4PteGlun) having n = 1, 3, 4, 5, 6, and 7 glutamyl residues have been tested as cosubstrates of the purine biosynthesis enzyme 10-formyltetrahydrofolate:5'-phosphoribosyl-5-amino-4-imidazolecarboxamide formyltransferase (AICAR transformylase) of chicken liver. The cosubstrates were synthesized by solid-phase synthesis, reduced catalytically, and formylated; a purified enzyme preparation was used and assayed spectrophotometrically following the deltaOD at 298 nm resulting from conversion of the formylated folate to the free tetrahydro form. Km values and Vm values determined at saturating concentrations of AICAR and at 25 and 150 mM KC1 were used to calculate the relative specificity constants Vm/Km for the N10-formyl-H4PteGlun. At physiologic [K+] (150 mM) they were 1.0, 52, 250, 93, 120, and 59 and at the lower (25 mM) [K+] the relative specificity constants were 1.0, 64, 78,34, 48, and 37 for n = 1, 3, 4, 5, 6, and 7, respectively. The poly-gamma-glutamates are clearly the preferred cosubstrates, particularly when tested at physiologic [K+]. The maximal relative specificity constant observed with N10-formyl-H4PteGlu4 supports the hypothesis that regulation of certain pathways of one-carbon metabolism may operate via alterations of the poly-gamma-glutamyl chain length. No inhibition by the unnatural (d) isomers of the N10-formyl-H4PteGlun was observed.     

Synthesis of novel D-ring fused 7'-aryl-androstano[17,16-d][1,2,4] triazolo[1,5-a]pyrimidines

The preparation of novel steroidal heterocycles containing the 7-aryl-substituted 1,2,4-triazolo[1,5-a]pyrimidine moiety fused to the 16,17-positions of the steroid nucleus is described. The Aldol reaction of 4-aza-androst-3,17-dione (1a) and dehydroepiandrosterone (DHEA, 1b) with aromatic aldehydes was catalyzed by KF/Al(2)O(3) to give the corresponding 3-oxo-4-aza-5α- and 3β-hydroxy-5-en-16-arylidene-17-ketosteroids (2a-r). Subsequently, the intermediates 2a-r reacted with dinucleophilic 3-amino-1,2,4-triazole in presence of t-BuOK to afford the title compounds (3a-r). All the synthesized heterosteroids are new and are currently being evaluated for their biological activities.