Protein identification assisted by the prediction of retention time in liquid chromatography/tandem mass spectrometry

Two-dimensional liquid chromatography (2D-LC) coupled on-line with electrospray ionization tandem mass spectrometry (2D-LC-ESI-MS/MS) is a new platform for analysis and identification of proteome. Peptides are separated by 2D-LC and then performed MS/MS analysis by tandem MS/MS. The MS/MS data are searched against database for protein identification. In one 2D-LC-ESI-MS/MS run, we obtained not only the structural information of peptides directly from MS/MS, but also the retention time of peptides eluted from LC. Information on the chromatographic behavior of peptides can assist protein identification in the new platform for proteomics. The retention time of the matching peptides of the identified protein was predicted by the hydrophobic contribute of each amino acid on reversed-phase liquid chromatography (RPLC). By using this strategy proteins were identified by four types of information: peptide mass fingerprinting (PMF), sequence query, and MS/MS ions searched and the predicted retention time. This additional information obtained from LC could assist protein identification with no extra experimental cost.     

Analysis of the resolution limitations of peptide identification algorithms

Proteome identification using peptide-centric proteomics techniques is a routinely used analysis technique. One of the most powerful and popular methods for the identification of peptides from MS/MS spectra is protein database matching using search engines. Significance thresholding through false discovery rate (FDR) estimation by target/decoy searches is used to ensure the retention of predominantly confident assignments of MS/MS spectra to peptides. However, shortcomings have become apparent when such decoy searches are used to estimate the FDR. To study these shortcomings, we here introduce a novel kind of decoy database that contains isobaric mutated versions of the peptides that were identified in the original search. Because of the supervised way in which the entrapment sequences are generated, we call this a directed decoy database. Since the peptides found in our directed decoy database are thus specifically designed to look quite similar to the forward identifications, the limitations of the existing search algorithms in making correct calls in such strongly confusing situations can be analyzed. Interestingly, for the vast majority of confidently identified peptide identifications, a directed decoy peptide-to-spectrum match can be found that has a better or equal match score than the forward match score, highlighting an important issue in the interpretation of peptide identifications in present-day high-throughput proteomics.     

YPED:An Integrated Bioinformatics Suite and Database for Mass Spectrometry-based Proteomics Research

We report a significantly-enhanced bioinformatics suite and database for proteomics research called Yale Protein Expression Database(YPED) that is used by investigators at more than 300 institutions worldwide. YPED meets the data management, archival, and analysis needs of a high-throughput mass spectrometry-based proteomics research ranging from a singlelaboratory, group of laboratories within and beyond an institution, to the entire proteomics community. The current version is a significant improvement over the first version in that it contains new modules for liquid chromatography–tandem mass spectrometry(LC–MS/MS) database search results, label and label-free quantitative proteomic analysis, and several scoring outputs for phosphopeptide site localization. In addition, we have added both peptide and protein comparative analysis tools to enable pairwise analysis of distinct peptides/proteins in each sample and of overlapping peptides/proteins between all samples in multiple datasets. We have also implemented a targeted proteomics module for automated multiple reaction monitoring(MRM)/selective reaction monitoring(SRM) assay development. We have linked YPED's database search results and both label-based and label-free fold-change analysis to the Skyline Panorama repository for online spectra visualization. In addition, we have built enhanced functionality to curate peptide identifications into an MS/MS peptide spectral library for all of our protein database search identification results.     

Identification of tryptic peptides from large databases using multiplexed tandem mass spectrometry: simulations and experimental results

Multiplexed tandem mass spectrometry (MS/MS) has recently been demonstrated as a means to increase the throughput of peptide identification in liquid chromatography (LC) MS/MS experiments. In this approach, a set of parent species is dissociated simultaneously and measured in a single spectrum (in the same manner that a single parent ion is conventionally studied), providing a gain in sensitivity and throughput proportional to the number of species that can be simultaneously addressed. In the present work, simulations performed using the Caenorhabditis elegans predicted proteins database show that multiplexed MS/MS data allow the identification of tryptic peptides from mixtures of up to ten peptides from a single dataset with only three "y" or "b" fragments per peptide and a mass accuracy of 2.5 to 5 ppm. At this level of database and data complexity, 98% of the 500 peptides considered in the simulation were correctly identified. This compares favorably with the rates obtained for classical MS/MS at more modest mass measurement accuracy. LC multiplexed Fourier transform-ion cyclotron resonance MS/MS data obtained from a 66 kDa protein (bovine serum albumin) tryptic digest sample are presented to illustrate the approach, and confirm that peptides can be effectively identified from the C. elegans database to which the protein sequence had been appended.     

Quantitative proteome analysis using differential stable isotopic labeling and microbore LC-MALDI MS and MS/MS

We demonstrate an approach for global quantitative analysis of protein mixtures using differential stable isotopic labeling of the enzyme-digested peptides combined with microbore liquid chromatography (LC) matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS). Microbore LC provides higher sample loading, compared to capillary LC, which facilitates the quantification of low abundance proteins in protein mixtures. In this work, microbore LC is combined with MALDI MS via a heated droplet interface. The compatibilities of two global peptide labeling methods (i.e., esterification to carboxylic groups and dimethylation to amine groups of peptides) with this LC-MALDI technique are evaluated. Using a quadrupole-time-of-flight mass spectrometer, MALDI spectra of the peptides in individual sample spots are obtained to determine the abundance ratio among pairs of differential isotopically labeled peptides. MS/MS spectra are subsequently obtained from the peptide pairs showing significant abundance differences to determine the sequences of selected peptides for protein identification. The peptide sequences determined from MS/MS database search are confirmed by using the overlaid fragment ion spectra generated from a pair of differentially labeled peptides. The effectiveness of this microbore LC-MALDI approach is demonstrated in the quantification and identification of peptides from a mixture of standard proteins as well as E. coli whole cell extract of known relative concentrations. It is shown that this approach provides a facile and economical means of comparing relative protein abundances from two proteome samples.     

Large-scale identification of proteins in human salivary proteome by liquid chromatography/mass spectrometry and two-dimensional gel electrophoresis-mass spectrometry

Human saliva contains a large number of proteins and peptides (salivary proteome) that help maintain homeostasis in the oral cavity. Global analysis of human salivary proteome is important for understanding oral health and disease pathogenesis. In this study, large-scale identification of salivary proteins was demonstrated by using shotgun proteomics and two-dimensinal gel electrophoresis-mass spectrometry (2-DE-MS). For the shotgun approach, whole saliva proteins were prefractionated according to molecular weight. The smallest fraction, presumably containing salivary peptides, was directly separated by capillary liquid chromatography (LC). However, the large protein fractions were digested into peptides for subsequent LC separation. Separated peptides were analyzed by on-line electrospray tandem mass spectrometry (MS/MS) using a quadrupole-time of flight mass spectrometer, and the obtained spectra were automatically processed to search human protein sequence database for protein identification. Additionally, 2-DE was used to map out the proteins in whole saliva. Protein spots 105 in number were excised and in-gel digested; and the resulting peptide fragments were measured by matrix-assisted laser desorption/ionization-mass spectrometry and sequenced by LC-MS/MS for protein identification. In total, we cataloged 309 proteins from human whole saliva by using these two proteomic approaches.     

Application of proteomics for fast identification of species-specific peptides from marine species

In this work, a novel approach based on proteomics is applied for the analysis of the three European marine mussel species: Mytilus edulis (ME), Mytilus galloprovincialis (MG) and Mytilus trossulus (MT), which are of interest in biotechnology and food industry. The proteomes of these species are poorly described in databases, are difficult to diagnose, and have a controversial taxonomy, To characterise species-specific peptides, we compared 51 matrix-assisted laser desorption/ioization-time of flight peptide mass maps generated from 6 random selected prominent spots derived from the two-dimensional electrophoresis analysis of foot protein extracts from several individuals. Minor species-specific differences in the peptide maps were detected in only one of the spots, corresponding to tropomyosin. Two peptides were unique to ME and MG individuals, whereas another peptide was present only in MT individuals. The sequence of these peptides was characterised by, nanoelectrospray ionization-ion trap (nanoESI-IT) tandem mass spectrometry (MS/MS) analysis followed by database searching and de novo sequence interpretation. We detected a single T to D amino acid substitution in MT tropomyosin. Unambiguous and highly-specific species identification was then demonstrated by analysing peptide extracts from tropomyosin spots by micro high-performande liquid chromatography (microHPL) ESI-IT mass spectrometry using the selected ion monitoring configuration, focused on these peptides, in continuous MS/MS operation. Our results suggest that proteomics may be successfully applied for the identification of species whose proteome is not present in databases.     

牛血清白蛋白胰蛋白酶酶解产物的色谱-质谱联用分析及其三种数据库搜寻鉴定方法的比较

利用反相高效液相色谱 (RP HPLC)和电喷雾串联质谱 (ESI MS MS)联用技术直接对模式蛋白分子 (牛血清白蛋白 ,BSA)的胰蛋白酶酶解产物进行分离和测定 .获得的一系列BSA酶解片段的一级 (MS)和二级 (MS MS)质谱数据经分析软件处理后 ,分别在不同处理和不同参数条件下 ,用 3种不同的方法通过网上蛋白质数据库进行蛋白质搜寻鉴定 .结果显示 ,3种搜寻法都能正确地鉴定该蛋白质 ,其中以利用MS数据的肽质量指纹谱搜寻法 (PMF法 )较为快捷方便 ,但鉴定结果易受数据处理和数据库搜寻鉴定时参数设置等因素的影响 ;利用未解析MS MS数据 (rawMS MSdata)的搜寻法可在较宽的搜寻参数变化范围内获得明确的鉴定结果 ;而借助从头测序 (denovosequencing)结果的序列搜寻法 (sequencequery)则显示出更高的专一性 ,利用较少酶解片段数据就能得到稳定和明确的鉴定结果 ,搜寻参数变化的影响很小 .就酶解条件、数据处理和搜寻参数设置对蛋白质鉴定结果的影响展开详细的讨论 ,为蛋白质组学研究中的数据处理和库搜寻鉴定积累了可借鉴的资料     

Postexperiment monoisotopic mass filtering and refinement (PE-MMR) of tandem mass spectrometric data increases accuracy of peptide identification in LC/MS/MS

Methods for treating MS/MS data to achieve accurate peptide identification are currently the subject of much research activity. In this study we describe a new method for filtering MS/MS data and refining precursor masses that provides highly accurate analyses of massive sets of proteomics data. This method, coined "postexperiment monoisotopic mass filtering and refinement" (PE-MMR), consists of several data processing steps: 1) generation of lists of all monoisotopic masses observed in a whole LC/MS experiment, 2) clusterization of monoisotopic masses of a peptide into unique mass classes (UMCs) based on their masses and LC elution times, 3) matching the precursor masses of the MS/MS data to a representative mass of a UMC, and 4) filtration of the MS/MS data based on the presence of corresponding monoisotopic masses and refinement of the precursor ion masses by the UMC mass. PE-MMR increases the throughput of proteomics data analysis, by efficiently removing "garbage" MS/MS data prior to database searching, and improves the mass measurement accuracies (i.e. 0.05 +/- 1.49 ppm for yeast data (from 4.46 +/- 2.81 ppm) and 0.03 +/- 3.41 ppm for glycopeptide data (from 4.8 +/- 7.4 ppm)) for an increased number of identified peptides. In proteomics analyses of glycopeptide-enriched samples, PE-MMR processing greatly reduces the degree of false glycopeptide identification by correctly assigning the monoisotopic masses for the precursor ions prior to database searching. By applying this technique to analyses of proteome samples of varying complexities, we demonstrate herein that PE-MMR is an effective and accurate method for treating massive sets of proteomics data.     

The minotaur proteome: Avoiding cross‐species identifications deriving from bovine serum in cell culture models

Cell culture is a fundamental tool in proteomics where mammalian cells are cultured in vitro using a growth medium often supplemented with 5–15% FBS. Contamination by bovine proteins is difficult to avoid because of adherence to the plastic vessel and the cultured cells. We have generated peptides from bovine serum using four sample preparation methods and analyzed the peptides by high mass accuracy LC‐MS/MS. Distinguishing between bovine and human peptides is difficult because of a considerable overlap of identical tryptic peptide sequences. Pitfalls in interpretation, different database search strategies to minimize erroneous identifications and an augmented contaminant database are presented.     

Classification and identification of bacteria using mass spectrometry-based proteomics

Timely classification and identification of bacteria is of vital importance in many areas of public health. Mass spectrometry-based methods provide an attractive alternative to well-established microbiologic procedures. Mass spectrometry methods can be characterized by the relatively high speed of acquiring taxonomically relevant information. Gel-free mass spectrometry proteomics techniques allow for rapid fingerprinting of bacterial proteins using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry or, for high-throughput sequencing of peptides from protease-digested cellular proteins, using mass analysis of fragments from collision-induced dissociation of peptide ions. The latter technique uses database searching of product ion mass spectra. A database contains a comprehensive list of protein sequences translated from protein-encoding open reading frames found in bacterial genomes. The results of such searches allow the assignment of experimental peptide sequences to matching theoretical bacterial proteomes. Phylogenetic profiles of sequenced peptides are then used to create a matrix of sequence-to-bacterium assignments, which are analyzed using numerical taxonomy tools. The results thereof reveal the relatedness between bacteria, and allow the taxonomic position of an investigated strain to be inferred.     

Properties of average score distributions of SEQUEST: the probability ratio method

High throughput identification of peptides in databases from tandem mass spectrometry data is a key technique in modern proteomics. Common approaches to interpret large scale peptide identification results are based on the statistical analysis of average score distributions, which are constructed from the set of best scores produced by large collections of MS/MS spectra by using searching engines such as SEQUEST. Other approaches calculate individual peptide identification probabilities on the basis of theoretical models or from single-spectrum score distributions constructed by the set of scores produced by each MS/MS spectrum. In this work, we study the mathematical properties of average SEQUEST score distributions by introducing the concept of spectrum quality and expressing these average distributions as compositions of single-spectrum distributions. We predict and demonstrate in the practice that average score distributions are dominated by the quality distribution in the spectra collection, except in the low probability region, where it is possible to predict the dependence of average probability on database size. Our analysis leads to a novel indicator, the probability ratio, which takes optimally into account the statistical information provided by the first and second best scores. The probability ratio is a non-parametric and robust indicator that makes spectra classification according to parameters such as charge state unnecessary and allows a peptide identification performance, on the basis of false discovery rates, that is better than that obtained by other empirical statistical approaches. The probability ratio also compares favorably with statistical probability indicators obtained by the construction of single-spectrum SEQUEST score distributions. These results make the robustness, conceptual simplicity, and ease of automation of the probability ratio algorithm a very attractive alternative to determine peptide identification confidences and error rates in high throughput experiments.     

Classification and identification of bacteria using mass spectrometry-based proteomics

Timely classification and identification of bacteria is of vital importance in many areas of public health. Mass spectrometry-based methods provide an attractive alternative to well-established microbiologic procedures. Mass spectrometry methods can be characterized by the relatively high speed of acquiring taxonomically relevant information. Gel-free mass spectrometry proteomics techniques allow for rapid fingerprinting of bacterial proteins using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry or, for high-throughput sequencing of peptides from protease-digested cellular proteins, using mass analysis of fragments from collision-induced dissociation of peptide ions. The latter technique uses database searching of product ion mass spectra. A database contains a comprehensive list of protein sequences translated from protein-encoding open reading frames found in bacterial genomes. The results of such searches allow the assignment of experimental peptide sequences to matching theoretical bacterial proteomes. Phylogenetic profiles of sequenced peptides are then used to create a matrix of sequence-to-bacterium assignments, which are analyzed using numerical taxonomy tools. The results thereof reveal the relatedness between bacteria, and allow the taxonomic position of an investigated strain to be inferred.     

Classification of genus Pseudomonas by MALDI-TOF MS based on ribosomal protein coding in S10-spc-alpha operon at strain level

We have proposed a rapid phylogenetic classification at the strain level by MALDI-TOF MS using ribosomal protein matching profiling. In this study, the S10-spc-alpha operon, encoding half of the ribosomal subunit proteins and highly conserved in eubacterial genomes, was selected for construction of the ribosomal protein database as biomarkers for bacterial identification by MALDI-TOF MS analysis to establish a more reliable phylogenetic classification. Our method revealed that the 14 reliable and reproducible ribosomal subunit proteins with less than m/z 15,000, except for L14, coded in the S10-spc-alpha operon were significantly useful biomarkers for bacterial classification at species and strain levels by MALDI-TOF MS analysis of genus Pseudomonas strains. The obtained phylogenetic tree was consisted with that based on genetic sequence (gyrB). Since S10-spc-alpha operons of genus Pseudomonas strains were sequenced using specific primers designed based on nucleotide sequences of genome-sequenced strains, the ribosomal subunit proteins encoded in S10-spc-alpha operon were suitable biomarkers for construction and correction of the database. MALDI-TOF MS analysis using these 14 selected ribosomal proteins is a rapid, efficient, and versatile bacterial identification method with the validation procedure for the obtained results.     

Proteomics-grade de novo sequencing approach

The conventional approach in modern proteomics to identify proteins from limited information provided by molecular and fragment masses of their enzymatic degradation products carries an inherent risk of both false positive and false negative identifications. For reliable identification of even known proteins, complete de novo sequencing of their peptides is desired. The main problems of conventional sequencing based on tandem mass spectrometry are incomplete backbone fragmentation and the frequent overlap of fragment masses. In this work, the first proteomics-grade de novo approach is presented, where the above problems are alleviated by the use of complementary fragmentation techniques CAD and ECD. Implementation of a high-current, large-area dispenser cathode as a source of low-energy electrons provided efficient ECD of doubly charged peptides, the most abundant species (65-80%), in a typical trypsin-based proteomics experiment. A new linear de novo algorithm is developed combining efficiency and speed, processing on a conventional 3 GHz PC, 1000 MS/MS data sets in 60 s. More than 6% of all MS/MS data for doubly charged peptides yielded complete sequences, and another 13% gave nearly complete sequences with a maximum gap of two amino acid residues. These figures are comparable with the typical success rates (5-15%) of database identification. For peptides reliably found in the database (Mowse score > or = 34), the agreement with de novo-derived full sequences was >95%. Full sequences were derived in 67% of the cases when full sequence information was present in MS/MS spectra. Thus the new de novo sequencing approach reached the same level of efficiency and reliability as conventional database-identification strategies.     

Two-dimensional mass spectra generated from the analysis of 15N-labeled and unlabeled peptides for efficient protein identification and de novo peptide sequencing

Protein identification has been greatly facilitated by database searches against protein sequences derived from product ion spectra of peptides. This approach is primarily based on the use of fragment ion mass information contained in a MS/MS spectrum. Unambiguous protein identification from a spectrum with low sequence coverage or poor spectral quality can be a major challenge. We present a two-dimensional (2D) mass spectrometric method in which the numbers of nitrogen atoms in the molecular ion and the fragment ions are used to provide additional discriminating power for much improved protein identification and de novo peptide sequencing. The nitrogen number is determined by analyzing the mass difference of corresponding peak pairs in overlaid spectra of (15)N-labeled and unlabeled peptides. These peptides are produced by enzymatic or chemical cleavage of proteins from cells grown in (15)N-enriched and normal media, respectively. It is demonstrated that, using 2D information, i.e., m/z and its associated nitrogen number, this method can, not only confirm protein identification results generated by MS/MS database searching, but also identify peptides that are not possible to identify by database searching alone. Examples are presented of analyzing Escherichia coli K12 extracts that yielded relatively poor MS/MS spectra, presumably from the digests of low abundance proteins, which can still give positive protein identification using this method. Additionally, this 2D MS method can facilitate spectral interpretation for de novo peptide sequencing and identification of posttranslational or other chemical modifications. We envision that this method should be particularly useful for proteome expression profiling of organelles or cells that can be grown in (15)N-enriched media.     

Improved machine learning method for analysis of gas phase chemistry of peptides

Background  

Accurate peptide identification is important to high-throughput proteomics analyses that use mass spectrometry. Search programs compare fragmentation spectra (MS/MS) of peptides from complex digests with theoretically derived spectra from a database of protein sequences. Improved discrimination is achieved with theoretical spectra that are based on simulating gas phase chemistry of the peptides, but the limited understanding of those processes affects the accuracy of predictions from theoretical spectra.     

CHOMPER: a bioinformatic tool for rapid validation of tandem mass spectrometry search results associated with high-throughput proteomic strategies

Current efforts aimed at developing high-throughput proteomics focus on increasing the speed of protein identification. Although improvements in sample separation, enrichment, automated handling, mass spectrometric analysis, as well as data reduction and database interrogation strategies have done much to increase the quality, quantity and efficiency of data collection, significant bottlenecks still exist. Various separation techniques have been coupled with tandem mass spectrometric (MS/MS) approaches to allow a quicker analysis of complex mixtures of proteins, especially where a high number of unambiguous protein identifications are the exception, rather than the rule. MS/MS is required to provide structural / amino acid sequence information on a peptide and thus allow protein identity to be inferred from individual peptides. Currently these spectra need to be manually validated because: (a) the potential of false positive matches i.e., protein not in database, and (b) observed fragmentation trends may not be incorporated into current MS/MS search algorithms. This validation represents a significant bottleneck associated with high-throughput proteomic strategies. We have developed CHOMPER, a software program which reduces the time required to both visualize and confirm MS/MS search results and generate post-analysis reports and protein summary tables. CHOMPER extracts the identification information from SEQUEST MS/MS search result files, reproduces both the peptide and protein identification summaries, provides a more interactive visualization of the MS/MS spectra and facilitates the direct submission of manually validated identifications to a database.     

Characterization of the human salivary proteome by capillary isoelectric focusing/nanoreversed-phase liquid chromatography coupled with ESI-tandem MS

Saliva is a readily available body fluid with great diagnostic potential. The foundation for saliva-based diagnostics, however, is the development of a complete catalog of secreted and "leaked" proteins detectable in saliva. By employing a capillary isoelectric focusing-based multidimensional separation platform coupled with electrospray ionization tandem mass spectrometry (MS), a total of 5338 distinct peptides were sequenced, leading to the identification of 1381 distinct proteins. A search of bacterial protein sequences also identified many peptides unique to several organisms and unique to the NCBI nonredundant database. To the best of our knowledge, this proteome study represents the largest catalog of proteins measured from a single saliva sample to date. Data analysis was performed on individual MS/MS spectra using the highly specific peptide identification algorithm, OMSSA. Searches were conducted against a decoyed SwissProt human database to control the false-positive rate at 1%. Furthermore, the well-curated SwissProt sequences represent perhaps the least redundant human protein sequence database (12,484 records versus the 50,009 records found in the International Protein Index human database), therefore minimizing multiple protein inferences from single peptides. This combined bioanalytical and bioinformatic approach has established a solid foundation for building up the human salivary proteome for the realization of the diagnostic potential of saliva.