Trabecular architecture in the humeral metaphyses of non-avian reptiles (Crocodylia,Squamata and Testudines): Lifestyle,allometry and phylogeny

The lifestyle of extinct tetrapods is often difficult to assess when clear morphological adaptations such as swimming paddles are absent. According to the hypothesis of bone functional adaptation, the architecture of trabecular bone adapts sensitively to physiological loadings. Previous studies have already shown a clear relation between trabecular architecture and locomotor behavior, mainly in mammals and birds. However, a link between trabecular architecture and lifestyle has rarely been examined. Here, we analyzed trabecular architecture of different clades of reptiles characterized by a wide range of lifestyles (aquatic, amphibious, generalist terrestrial, fossorial, and climbing). Humeri of squamates, turtles, and crocodylians have been scanned with microcomputed tomography. We selected spherical volumes of interest centered in the proximal metaphyses and measured trabecular spacing, thickness and number, degree of anisotropy, average branch length, bone volume fraction, bone surface density, and connectivity density. Only bone volume fraction showed a significant phylogenetic signal and its significant difference between squamates and other reptiles could be linked to their physiologies. We found negative allometric relationships for trabecular thickness and spacing, positive allometries for connectivity density and trabecular number and no dependence with size for degree of anisotropy and bone volume fraction. The different lifestyles are well separated in the morphological space using linear discriminant analyses, but a cross-validation procedure indicated a limited predictive ability of the model. The trabecular bone anisotropy has shown a gradient in turtles and in squamates: higher values in amphibious than terrestrial taxa. These allometric scalings, previously emphasized in mammals and birds, seem to be valid for all amniotes. Discriminant analysis has offered, to some extent, a distinction of lifestyles, which however remains difficult to strictly discriminate. Trabecular architecture seems to be a promising tool to infer lifestyle of extinct tetrapods, especially those involved in the terrestrialization.     

Computational modal analysis of a composite pelvic bone: convergence and validation studies

The purpose of the present study was to describe the structural density and geometry of the bone, as well as its sensitivity to the resolution of finite element discretisation. The study introduces a novel way to validate biomechanical model of the bone by experimental modal analysis. The structural density and geometry of the model was obtained from a composite bone. A detailed investigation of the weight dependence of the bone on the mesh resolution was performed to obtain the best match with the real weight of the tested bone. The computational model was compared with the experimental results obtained from the modal analysis. The overall changes of the modal properties and bone weight in the model caused by different mesh resolutions and order of approximation were below 10%, despite the bone was modelled with simple isotropic material properties. The experimental modal analysis shows a great potential to be a robust verification tool of computational biomechanical models because it provides boundary conditions–free results. The sensitivity analysis revealed that the linear approximation of the density field is not suitable for the modelling of the modal response of composite bone.     

The mechanical significance of morphological variation in the macaque mandibular symphysis during mastication

Catarrhine symphyseal morphology displays considerable variation. Although this has been related to dentition, phylogeny, sexual dimorphism, and facial orientation, most emphasis has been given to the functional significance of the symphysis to mechanical loading during mastication. The current state of knowledge regarding the mechanical significance of the symphysis is based on a combination of in vivo experimental and comparative studies on Macaca fascicularis. These approaches have provided considerable insight into the stereotypical patterns of loading in the symphyseal region during chewing and hypotheses related to the associated symphyseal morphologies. Finite element analysis (FEA) was used to assess how in silico manipulation translates into the mechanical loading hypotheses previously proposed experimentally. In particular, this study tests the form-function relationship of the symphysis of an adult M. fascicularis mandible during lateral transverse bending and dorsoventral shear of the mandibular symphysis, and a series of modified hypothetical morphologies including absence/presence of tori and variation in the inclination and depth of the symphysis. FEA results of this study support previous findings that stresses associated with lateral transverse bending and dorsoventral shear of the mandibular symphysis can be minimized via an increased labio-lingual thickness in the superior transverse torus, an oblique symphyseal inclination, and/or an increased symphyseal depth. The finding that reduction of strains related to lateral transverse bending and dorsoventral shear can be achieved through a number of different morphologies contributes to our understanding of the influence of morphological and/or developmental constraints, such as dental development, on symphyseal form.     

Testing convergent and parallel adaptations in talpids humeral mechanical performance by means of geometric morphometrics and finite element analysis

The shape and mechanical performance in Talpidae humeri were studied by means of Geometric Morphometrics and Finite Element Analysis, including both extinct and extant taxa. The aim of this study was to test whether the ability to dig, quantified by humerus mechanical performance, was characterized by convergent or parallel adaptations in different clades of complex tunnel digger within Talpidae, that is, Talpinae+Condylura (monophyletic) and some complex tunnel diggers not belonging to this clade. Our results suggest that the pattern underlying Talpidae humerus evolution is evolutionary parallelism. However, this insight changed to true convergence when we tested an alternative phylogeny based on molecular data, with Condylura moved to a more basal phylogenetic position. Shape and performance analyses, as well as specific comparative methods, provided strong evidence that the ability to dig complex tunnels reached a functional optimum in distantly related taxa. This was also confirmed by the lower phenotypic variance in complex tunnel digger taxa, compared to non‐complex tunnel diggers. Evolutionary rates of phenotypic change showed a smooth deceleration in correspondence with the most recent common ancestor of the Talpinae+Condylura clade. J. Morphol. 2012. © 2012 Wiley Periodicals, Inc.     

Cranial functional morphology of fossil dogs and adaptation for durophagy in Borophagus and Epicyon (Carnivora,Mammalia)

Morphological specialization is a complex interplay of adaptation and constraint, as similarly specialized features often evolve convergently in unrelated species, indicating that there are universally adaptive aspects to these morphologies. The evolutionary history of carnivores offers outstanding examples of convergent specialization. Among larger predators, borophagine canids were highly abundant during the tertiary of North America and are regarded as the ecological vicars of Afro‐Eurasian hyenas. Borophaginae is an extinct group of 60+ species, the largest forms evolving robust skulls with prominently domed foreheads, short snouts, and hypertrophied fourth premolars. These specializations have been speculated to enhance bone cracking. To test the extent that the skulls of derived borophagines were adapted for producing large bite forces and withstanding the mechanical stresses associated with bone cracking relative to their nonrobust sister clades, we manipulated muscle forces in models of six canid skulls and analyzed their mechanical response using 3D finite element analysis. Performance measures of bite force production efficiency and deformation minimization showed that skulls of derived borophagines Borophagus secundus and Epicyon haydeni are particularly strong in the frontal region; maximum stresses are lower and more evenly distributed over the skull than in other canids. Frontal strength is potentially coupled with a temporalis‐driven bite to minimize cranial stress during biting in the two derived genera, as tensile stress incurred by contracting temporalis muscles is dissipated rostro‐ventrally across the forehead and face. Comparison of estimated masticatory muscle cross section areas suggests that the temporalis‐masseter ratio is not strongly associated with morphological adaptations for bone cracking in Borophagus and Epicyon; larger body size may explain relatively larger temporalis muscles in the latter. When compared with previous studies, the overall cranial mechanics of the derived borophagines is more similar to bone‐cracking hyaenids and percrocutids than to their canid relatives, indicating convergence in both morphological form and functional capability. J. Morphol., 2010. © 2010 Wiley‐Liss, Inc.     

Modelling stress in the feeding apparatus of seahorses and pipefishes (Teleostei: Syngnathidae)

Seahorses and pipefishes are extremely fast suction feeders, and the fast strikes probably result in large and rapid pressure drops in the buccal cavity. These rapid drops in pressure imply heavy mechanical loading on the cranium; hence, the feeding apparatus is thought to experience high levels of stress. We used finite element analysis (FEA) to investigate where stress accumulates under strong suction pressure, and whether there is a difference in craniofacial stress distribution between long‐ and short‐snouted species. The expectation was that high stress levels would occur at the articulations and in the cartilaginous regions of the cranium, and that, given the same pressure, the skulls of long‐snouted species would exhibit lower stress levels than the skulls of short‐snouted species, as an evolutionary increase in snout length might have made these species structurally better adapted to deal with high suction pressures. The results partially support the first hypothesis: except for Dunckerocampus dactyliophorus, all models show peak stress concentrations at the articulations and cartilaginous regions. However, no simple relationship between snout length and the magnitudes of stress predicted by the FEA was found. In an attempt to explain this lack of a relationship, the methodology was evaluated by assessing the effect of hyoid position and model construction on the stress distribution. © 2011 The Linnean Society of London, Biological Journal of the Linnean Society, 2011, 104 , 680–691.     

Influence of custom-made implant designs on the biomechanical performance for the case of immediate post-extraction placement in the maxillary esthetic zone: a finite element analysis

Due to the increasing adoption of immediate implantation strategies and the rapid development of the computer aided design/computer aided manufacturing technology, a therapeutic concept based on patient-specific implant dentistry has recently been reintroduced by many researchers. However, little information is available on the designs of custom-made dental implant systems, especially their biomechanical behavior. The influence of the custom-made implant designs on the biomechanical performance for both an immediate and a delayed loading protocol in the maxillary esthetic zone was evaluated by means of the finite element (FE) method. FE models of three dental implants were considered: a state of the art cylindrical implant and two custom-made implants designed by reverse engineering technology, namely a root-analogue implant and a root-analogue threaded implant. The von Mises stress distributions and micro-motions around the bone-implant interfaces were calculated using ANSYS software. In a comparison of the three implant designs for both loading protocols, a favorable biomechanical performance was observed for the use of root-analogue threaded implant which approximated the geometry of natural anterior tooth and maintained the original long-axis. The results indicated that bone-implant interfacial micro-motion was reduced and a favorable stress distribution after osseointegration was achieved.     

Translation of biomechanical concepts in bone tissue engineering: from animal study to revision knee arthroplasty

Bone defects in revision knee arthroplasty are often located in load-bearing regions. The goal of this study was to determine whether a physiologic load could be used as an in situ osteogenic signal to the scaffolds filling the bone defects. In order to answer this question, we proposed a novel translation procedure having four steps: (1) determining the mechanical stimulus using finite element method, (2) designing an animal study to measure bone formation spatially and temporally using micro-CT imaging in the scaffold subjected to the estimated mechanical stimulus, (3) identifying bone formation parameters for the loaded and non-loaded cases appearing in a recently developed mathematical model for bone formation in the scaffold and (4) estimating the stiffness and the bone formation in the bone-scaffold construct. With this procedure, we estimated that after 3 years mechanical stimulation increases the bone volume fraction and the stiffness of scaffold by 1.5- and 2.7-fold, respectively, compared to a non-loaded situation.     

Allometry and performance: the evolution of skull form and function in felids

Allometric patterns of skull‐shape variation can have significant impacts on cranial mechanics and feeding performance, but have received little attention in previous studies. Here, we examine the impacts of allometric skull‐shape variation on feeding capabilities in the cat family (Felidae) with linear morphometrics and finite element analysis. Our results reveal that relative bite force diminishes slightly with increasing skull size, and that the skulls of the smallest species undergo the least strain during biting. However, larger felids are able to produce greater gapes for a given angle of jaw opening, and they have overall stronger skulls. The two large felids in this study achieved increased cranial strength by increasing skull bone volume relative to surface area. Allometry of skull geometry in large felids reflects a trade‐off between the need to increase gape to access larger prey while maintaining the ability to resist unpredictable loading when taking large, struggling prey.