3D non-linear analysis of the acetabular construct following impaction grafting

The study investigates the short-term behaviour of the acetabular construct following revision hip arthroplasty, carried out using the Slooff-Ling impaction grafting technique; using 3D finite element analyses. An elasto-plastic material model is used to describe the constitutive behaviour of morsellised cortico-cancellous bone (MCB) graft, since it has been shown that MCB undergoes significant plastic deformation under normal physiological loads. Based on previous experimental studies carried out by the authors and others, MCB is modelled using non-linear elasticity and Drucker Prager Cap (DPC) plasticity. Loading associated with walking, sitting down, and standing up is applied to the acetabular cup through a femoral head using smooth sliding surfaces. The analyses yield distinctive patterns of migration and rotation due to different activities. These are found to be similar to those observed in the clinical setting.     

The elastic properties of morsellised cortico-cancellous bone graft are dependent on its prior loading

Confined compression experiments were carried out on cortico-cancellous bone taken from bovine femoral condyles to assess the effect of prior loading on the elastic confined modulus, E(c) of morsellised cortico-cancellous bone (MCB). Measurements were taken to find the values of E(c) for MCB subjected to cyclic loading resulting in axial stresses in the range of 0.5-3.0 N mm(2). Two values of E(c) were considered: E(ic), the instantaneous modulus, and E(dc), the delayed modulus allowing for stress relaxation effects. It was found that the values of E(c) increased with increasing maximum axial stress. It was also found that for each stress level the values of E(c) increased as the number of load cycles increased. The dependence of E(c) on the maximum axial stress and the number of load cycles is seen to explain the wide range of values for the apparent modulus of MCB found in previous studies. Tests examining the stress relaxation behaviour of MCB are also discussed. The results indicate that a minimum of 10 compaction episodes are required for MCB to achieve around 90% of its predicted maximum stiffness for a given compaction force.     

Evidence of species succession during chlorobenzene biodegradation

We have previously reported the disappearance of a specific strain degrading chlorobenzene from a functionally stable bioreactor. In the present work, we investigated this species succession and isolated a new dominant strain, identified as Pandoraea pnomenusa sp. strain MCB032. A specific 16S rRNA-targeted oligonucleotide probe was designed and validated to identify strain MCB032 using fluorescence in situ hybridisation (FISH). The results confirmed the presence of strain MCB032 in samples collected over time, and showed that it was primarily located within the biofilm. Denaturing gradient gel electrophoresis (DGGE) provided evidence that the species succession occurred early in the operating period. The application of these biomolecular tools highlighted the remarkable stability of this new strain during the 15 months of reactor operation. The succession was attributed to the competitive kinetic behaviour of strain MCB032, which exhibited faster growth (micro(max) = 0.34 h(-1)) and higher substrate affinity (K(s) = 0.35 mg L(-1)) than strain JS150. Finally, this study contributed to the characterisation of the recently established Pandoraea genus, an emerging group in the biodegradation field.     

Experimental manipulation of male behaviour during copulation in Stenomacra marginella (Heteroptera: Largidae): effect on copula duration, female remating and oviposition

Apparently stimulatory male copulatory behaviour (MCB) is widespread among arthropods and it could help males to increase their fitness by inducing favourable behavioural and physiological changes in females. The empirical study of female responses to MCB is hindered because its experimental manipulation is difficult. We have developed a technique for reducing, with minimal disturbance, the frequency of MCB in the true bug Stenomacra marginella. Here, we test the idea that, in a polygamous species like S. marginella, sexual selection favours males whose MCB induces females to increase copula duration (thereby increasing the amount of sperm and accessory substances transferred), reduce their sexual receptivity to additional males and increase their rate of oviposition. Males prevented from performing MCB increased their rate of attempts to perform MCB. Copulations with previously mated females were of longer duration than those with virgin females, probably as a male adaptation for sperm competition, and MCB could have played a role in inducing this effect. Partial or total experimental reduction of MCB frequency had no effect on remating rates, because most females accepted remating at the first opportunity (1 day after their first copula). The probability of egg laying was reduced in females whose first mate was partially prevented from performing copulatory courtship, but not in females whose first mate was completely prevented from performing copulatory courtship. This is an intriguing result and further experiments are needed to understand its causes. We hypothesize that MCB evolved as a result of sexual selection.     

On the applicability of bovine morsellized cortico-cancellous bone as a substitute for human morsellized cortico-cancellous bone for in vitro mechanical testing

Morsellized cortico-cancellous bone (MCB) is frequently used in orthopaedic revision surgery to restore lost bone stock. In this study, we examine the validity of using bovine MCB as a substitute for human MCB in in vitro mechanical testing of bone grafts. The paper describes the fat and water content of impacted and unimpacted human and bovine MCB. During this work we applied constrained compression testing to describe the elastic, plastic and time dependent response. Nearly all parameters were found to be significantly different and were influenced differently by impaction for the two types of MCB. The denser trabecular structure, higher fat content of bovine MCB and higher stiffness and compressive strength of cortical bovine bone may explain the differences observed. Consequently we are not confident about the applicability of bovine MCB as a substitute for human MCB for in vitro mechanical testing.     

Chlorobenzene removal efficiencies and removal processes in a pilot-scale constructed wetland treating contaminated groundwater

Low-chlorinated benzenes (CBs) are widespread groundwater contaminants and often threaten to contaminate surface waters. Constructed wetlands (CWs) in river floodplains are a promising technology for protecting sensitive surface water bodies from the impact of CBs. The efficiency and seasonal variability of monochlorobenzene (MCB), 1,4-dichlorobenzene (1,4-DCB) and 1,2-dichlorobenzene (1,2-DCB) removal, the impact of planting, and gaseous MCB emissions from the filter surface were investigated over the course of 1 year in both a vegetated pilot-scale CW and an unplanted reference plot (UR). Annual mean concentration decreases of MCB and 1,4-DCB were observed; however, annual mean 1,2-DCB removal was seen only in the upper filter layer. Planting (Phragmites australis) had a statistically significant beneficial effect on removal. The CB removal efficiency in the CW generally decreased with depth, and seasonal variations of removal were evident, with less concentration decrease during summer. Load removal efficiencies of 59-65% (262-358 mg m⁻² d⁻¹) for MCB, 59-69% (4.0-5.1 mg m⁻² d⁻¹) for 1,4-DCB and 29-42% (0.6-2.1 mg m⁻² d⁻¹) for 1,2-DCB were observed in June and July. Volatilization of MCB from the filter surface accounted for 2-4% of the total amount removed. Simple cover layers of organic materials on the filter surface were suitable for MCB emission reduction. Model calculations were carried out to estimate the MCB removal potential attributable to microbial degradation, volatilisation, and plant uptake in the CW and UR. Microbial degradation was the dominating process. The observed positive impact of plants on MCB removal was caused by improved oxygen supply (due to root oxygen release into the rhizosphere and enhanced water table fluctuations), and direct plant uptake.     

Patient-specific acetabular shape modelling: comparison among sphere,ellipsoid and conchoid parameterisations

The shape of the human acetabular cup was commonly represented as a hemisphere, but different geometries and patient-specific shapes have been recently proposed in the literature. Our aim was to test the limits of the sphericity assumption by comparing three different parameterisations, namely the sphere, the ellipsoid and the rotational conchoid. Models of hip surfaces, reconstructed from CT scans taken from Caucasian race cadavers and patients, were automatically processed to extract the acetabular surface. Two separate analyses were carried out on the overall acetabular shape, including both the acetabular fossa and the lunate surface (case A) and acetabular cup represented by the lunate surface only (case B). Nonlinear gradient-based and evolutionary computation approaches were implemented for the fitting process. Minor differences from the three idealised geometries were detected (median values of the fitting errors < 1 mm). Nonetheless, the sphere fitting was found to be statistically different from both the ellipsoid (p < 2.50e ? 10) and the conchoid (p < 1.07e ? 09), whereas no statistical difference was detected between the ellipsoid and the conchoid for case A. Significance of the difference between ellipsoid and sphere (p < 4.55e ? 12) and between conchoid and sphere (p < 1.93e ? 11) was found for case B as well. Interestingly, for case B statistical difference was detected between the ellipsoid and the conchoid. In conclusion, we synthesise that the morphology of the overall acetabular cup can be parameterised both with an ellipsoid shape and with a conchoid shape as well with superior quality than the simple sphere. Differently, if one considers just the lunate surface, better fitting results are expected when using the ellipsoid.     

Mapping of QTL for resistance to the Mediterranean corn borer attack using the intermated B73 × Mo17 (IBM) population of maize

The Mediterranean corn borer or pink stem borer (MCB, Sesamia nonagrioides Lefebvre) causes important yield losses as a consequence of stalk tunneling and direct kernel damage. B73 and Mo17 are the source of the most commercial valuable maize inbred lines in temperate zones, while the intermated B73 × Mo17 (IBM) population is an invaluable source for QTL identification. However, no or few experiments have been carried out to detect QTL for corn borer resistance in the B73 × Mo17 population. The objective of this work was to locate QTL for resistance to stem tunneling and kernel damage by MCB in the IBM population. We detected a QTL for kernel damage at bin 8.05, although the effect was small and two QTL for stalk tunneling at bins 1.06 and 9.04 in which the additive effects were 4 cm, approximately. The two QTL detected for MCB resistance were close to other QTL consistently found for European corn borer (ECB, Ostrinia nubilalis Hübner) resistance, indicating mechanisms of resistance common to both pests or gene clusters controlling resistance to different plagues. The precise mapping achieved with the IBM population will facilitate the QTL pyramiding and the positional cloning of the detected QTL.     

Additive and nonadditive genetic variation in avian personality traits

Individuals of all vertebrate species differ consistently in their reactions to mildly stressful challenges. These typical reactions, described as personalities or coping strategies, have a clear genetic basis, but the structure of their inheritance in natural populations is almost unknown. We carried out a quantitative genetic analysis of two personality traits (exploration and boldness) and the combination of these two traits (early exploratory behaviour). This study was carried out on the lines resulting from a two-directional artificial selection experiment on early exploratory behaviour (EEB) of great tits (Parus major) originating from a wild population. In analyses using the original lines, reciprocal F(1) and reciprocal first backcross generations, additive, dominance, maternal effects ands sex-dependent expression of exploration, boldness and EEB were estimated. Both additive and dominant genetic effects were important determinants of phenotypic variation in exploratory behaviour and boldness. However, no sex-dependent expression was observed in either of these personality traits. These results are discussed with respect to the maintenance of genetic variation in personality traits, and the expected genetic structure of other behavioural and life history traits in general.     

Improved definition of chromosomal breakpoints using high-resolution multicolour banding

Characterisation of chromosome rearrangements using conventional banding techniques often fails to determine the localisation of breakpoints precisely. In order to improve the definition of chromosomal breakpoints, the high-resolution multicolour banding (MCB) technique was applied to identify human chromosome 5 breakpoints from 40 clinical cases previously assessed by conventional banding techniques. In 30 cases (75%), at least one breakpoint was redefined, indicating that MCB markedly improves chromosomal breakpoint localisation. The MCB pattern is highly reproducible and, in contrast to conventional banding pattern, is consistent in both short and elongated chromosomes. This might be of fundamental interest for the detection of chromosomal abnormalities, especially in tumour cells. Moreover, MCB even allows the detection of abnormalities that remain cryptic in GTG-banding analysis.     

Formation and Rapid Export of the Monochlorobimane–Glutathione Conjugate in Cultured Rat Astrocytes

Monochlorobimane (MCB) is often used to visualize glutathione (GSH) levels in cultured cells, since it is quickly converted to a fluorescent GSH conjugate (GS–MCB). To test for consequences of MCB application on the GSH metabolism of astrocytes, we have studied rat astrocyte-rich primary cultures as model system. MCB caused a concentration dependent rapid decrease in the cellular GSH content. Simultaneously, a transient accumulation of GS–MCB in the cells was observed with a maximal content 5 min after MCB application. The cellular accumulation was followed by a rapid release of GS–MCB into the medium with a maximal initial export rate of 27.9 ± 6.5 nmol h⁻¹ mg protein⁻¹. Transporters of the family of multidrug resistance proteins (Mrps) are likely to be involved in this export, since the Mrp inhibitor MK571 lowered the export rate by 60%. These data demonstrate that, due to its rapid export from astrocytes, GS–MCB is only under well-defined conditions a reliable indicator of the cellular GSH concentration and that MK571 can be used to maintain maximal GS–MCB levels in astrocytes.     

Study of the release mechanism of diltiazem hydrochloride from matrices based on chitosan-alginate and chitosan-carrageenan mixtures

The aim of this work was to establish the diltiazem hydrochloride release mechanism from the chitosan-alginate matrix tablet (MCB/AS) and chitosan-carrageenan matrix tablet (MCS/CSI). The weight loss for MCS/CSI is mainly due to the weight loss of the matrix while for MCB/AS it is mainly due to the diltiazem hydrochloride released from the tablet. Using the Peppa's model the release order for MCS/CSI was n = 1.07 +/- 0.13 and for MCB/AS was n = 0.76 +/- 0.02. Thus, MCS/CSI has a transport mechanism, and for MCB/AS the drug release mechanism is a combined process of diffusion and relaxation. MCB/AS has an elastic modulus (G' = 10(5) Pa) one order of magnitude higher than MCS/CSI (G' = 10(4) Pa). MCB/AS is able to uptake solvent without disrupting the microstructure due to its high elastic modulus. Instead MCS/CSI showed a quick erosion process, which conducted to the tablet disintegration due to a fast solvent uptake process.     

Detection of monochlorobenzene metabolizing bacteria under anoxic conditions by DNA-stable isotope probing

Cultivation-independent analyses were applied to study the structural diversity of the bacterial community which developed in groundwater inoculated microcosms actively metabolizing monochlorobenzene (MCB) under anaerobic conditions. Addition of ¹³C-labelled MCB demonstrated that the community produced ¹³CO₂ as a metabolite at slightly increasing rates over a period of 1,051 days while no ¹³C-methane evolved. Genetic profiles of partial 16S rRNA genes generated with the single-strand conformation polymorphism (SSCP) technique by PCR from directly extracted total DNA revealed that, despite the long incubation period, six replicate microcosms were characterized by almost the same microbial members. Nine distinguishable contributors to the SSCP-profiles were characterized by DNA sequencing, revealing the presence of different members from the phyla Proteobacteria, Fibrobacteres and from the candidate division OD1. DNA-stable isotope probing (SIP) was applied to distinguish the actual MCB metabolizing bacteria from the other community members. This study reveals for the first time the structural diversity of an anaerobic MCB metabolizing bacterial community. However, it also demonstrates the limitations of SIP to detect bacteria slowly metabolizing carbon sources under anaerobic conditions.     

Multicolor chromosome banding (MCB) with YAC/BAC-based probes and region-specific microdissection DNA libraries

Multicolor chromosome banding (MCB) allows the delineation of chromosomal regions with a resolution of a few megabasepairs, i.e., slightly below the size of most visible chromosome bands. Based on the hybridization of overlapping region-specific probe libraries, chromosomal subregions are hybridized with probes that fluoresce in distinct wavelength intervals, so they can be assigned predefined pseudo-colors during the digital imaging and visualization process. The present study demonstrates how MCB patterns can be produced by region-specific microdissection derived (mcd) libraries as well as collections of yeast or bacterial artificial chromosomes (YACs and BACs, respectively). We compared the efficiency of an mcd library based approach with the hybridization of collections of locus-specific probes (LSP) for fluorescent banding of three rather differently sized human chromosomes, i.e., chromosomes 2, 13, and 22. The LSP sets were comprised of 107 probes specific for chromosome 2, 82 probes for chromosome 13, and 31 probes for chromosome 22. The results demonstrated a more homogeneous coverage of chromosomes and thus, more desirable banding patterns using the microdissection library-based MCB. This may be related to the observation that chromosomes are difficult to cover completely with YAC and/or BAC clones as single-color fluorescence in situ hybridization (FISH) experiments showed. Mcd libraries, on the other hand, provide high complexity probes that work well as region-specific paints, but do not readily allow positioning of breakpoints on genetic or physical maps as required for the positional cloning of genes. Thus, combinations of mcd libraries and locus-specific large insert DNA probes appear to be the most efficient tools for high-resolution cytogenetic analyses.     

Diversity of trypsins in the Mediterranean corn borer Sesamia nonagrioides (Lepidoptera: Noctuidae), revealed by nucleic acid sequences and enzyme purification

The existence of a diverse trypsin gene family with a main role in the proteolytic digestion process has been proved in vertebrate and invertebrate organisms. In lepidopteran insects, a diversity of trypsin-like genes expressed in midgut has also been identified. Genomic DNA and cDNA trypsin-like sequences expressed in the Mediterranean corn Borer (MCB), Sesamia nonagrioides, midgut are reported in this paper. A phylogenetic analysis revealed that at least three types of trypsin-like enzymes putatively involved in digestion are conserved in MCB and other lepidopteran species. As expected, a diversity of sequences has been found, including four type-I (two subtypes), four type-II (two subtypes) and one type-III. In parallel, four different trypsins have been purified from midgut lumen of late instar MCB larvae. N-terminal sequencing and mass spectrometric analyses of purified trypsins have been performed in order to identify cDNAs coding for major trypsins among the diversity of trypsin-like sequences obtained. Thus, it is revealed that the four purified trypsins in MCB belong to the three well-defined phylogenetic groups of trypsin-like sequences detected in Lepidoptera. Major active trypsins present in late instar MCB lumen guts are trypsin-I (type-I), trypsin-IIA and trypsin-IIB (type-II), and trypsin-III (type-III). Trypsin-I, trypsin-IIA and trypsin-III showed preference for Arg over Lys, but responded differently to proteinaceous or synthetic inhibitors. As full-length cDNA clones coding for the purified trypsins were available, three-dimensional protein models were built in order to study the implication of specific residues on their response to inhibitors. Thus, it is predicted that Arg73, conserved in type-I lepidopteran trypsins, may favour reversible inhibition by the E-64. Indeed, the substitution of Val213Cys, unique for type-II lepidopteran trypsins, may be responsible for their specific inhibition by HgCl2. The implication of these results on the optimisation of the use of protease inhibitors for pest control, and on the identification of endoprotease-mediated resistance to Bacillus thuringiensis Cry-toxins is discussed.     

Reductive Dechlorination of 1,2,4-Trichlorobenzene by Staphylococcus epidermidis Isolated from Intestinal Contents of Rats

Twelve bacterial strains which were concerned with dechlorination of 1,2,4-trichlorobenzene (TCB) were isolated from the intestinal contents of rats and it was found that they belonged to Staphylococcus epidermidis (strain A-F), Staphylococcus saprophyticus (strain G), Streptococcus sp. (strains H and I), Bacillus sp. (strain J), Gram negative rod (strain K) and Lactobacillus sp. (strain L).

In Staphylococcus epidermidis (Strain A), TCB was mainly converted to o-dichlorobenzene and the latter was preferentially converted to monochlorobenzene (MCB) among dichlorobenzenes (DCBs). These conversions proceeded only under a gas phase of hydrogen. Furthermore, dry and broken cells of intact bacteria also maintained the dechlorinating activities, which were stimulated by the addition of NADPH.

Therefore, it was supposed that the conversion of TCB to MCB via DCBs was reductively carried out by enzymes originating from the isolated bacteria.     

Molecular definition of high-resolution multicolor banding probes: first within the human DNA sequence anchored FISH banding probe set.

Fluorescence in situ hybridization (FISH) banding approaches are standard for the exact characterization of simple, complex, and even cryptic chromosomal aberrations within the human genome. The most frequently applied FISH banding technique is the multicolor banding approach, also abbreviated as m-band, MCB, or in its whole genomic variant multitude MCB (mMCB). MCB allows the differentiation of chromosome region-specific areas at the GTG band and sub-band level and is based on region-specific microdissection libraries, producing changing fluorescence intensity ratios along the chromosomes. The latter are used to assign different pseudocolors to specific chromosomal regions. Here we present the first bacterial artificial chromosome (BAC) array comparative genomic hybridization (aCGH) mapped, comprehensive, genome-wide human MCB probe set. All 169 region-specific microdissection libraries were characterized in detail for their size and the regions of overlap. In summary, the unique possibilities of the MCB technique to characterize chromosomal breakpoints in one FISH experiment are now complemented by the feature of being anchored within the human DNA sequence at the BAC level.