Simultaneous utilization of glucose and D-xylose by Candida shehatae in a chemostat

The kinetics of biomass formation, D-xylose utilization, and mixed substrate utilization were determined in a chemostat using the yeast Candida shehatae. The maximum growth rate of C. shehatae grown aerobically on D-xylose was 0.42 h⁻¹ and the Monod constant, K _s, was 0.06 g L⁻¹. The biomass yield, Y _{X/S}, ranged from 0.40 to 0.50 g g⁻¹ over a dilution rate range of 0.2–0.3 h⁻¹, when C. shehatae was grown on pure D-xylose. Mixtures of D-xylose and glucose (∼1 : 1) were simultaneously utilized over a dilution rate from 0.15 to 0.35 h⁻¹ at pH 3.5 and 4.5, but pH 3.5 reduced μ_max and reduced the dilution rate range over which D-xylose was utilized in the presence of glucose. At pH 4.5, μ_max was not reduced with the mixed sugar feed and the overall or lumped K _s value was not significantly increased (0.058 g L⁻¹ vs 0.06 g L⁻¹), when compared to a pure D-xylose feed. Kinetic data indicate that C. shehatae is an excellent candidate for chemostat production of value added products from renewable carbon sources, since simultaneous mixed substrate utilization was observed over a wide range of growth rates on a 1 : 1 mixture of glucose and D-xylose. Received 21 August 1997/ Accepted in revised form 28 May 1998     

Production of hexanoic acid from d-galactitol by a newly isolated Clostridium sp. BS-1

In a study screening anaerobic microbes utilizing d-galactitol as a fermentable carbon source, four bacterial strains were isolated from an enrichment culture producing H₂, ethanol, butanol, acetic acid, butyric acid, and hexanoic acid. Among these isolates, strain BS-1 produced hexanoic acid as a major metabolic product of anaerobic fermentation with d-galactitol. Strain BS-1 belonged to the genus Clostridium based on phylogenetic analysis using 16S rRNA gene sequences, and the most closely related strain was Clostridium sporosphaeroides DSM 1294^T, with 94.4% 16S rRNA gene similarity. In batch cultures, Clostridium sp. BS-1 produced 550 ± 31 mL L⁻¹ of H₂, 0.36 ± 0.01 g L⁻¹ of acetic acid, 0.44 ± 0.01 g L⁻¹ of butyric acid, and 0.98 ± 0.03 g L⁻¹ of hexanoic acid in a 4-day cultivation. The production of hexanoic acid increased to 1.22 and 1.73 g L⁻¹ with the addition of 1.5 g L⁻¹ of sodium acetate and 100 mM 2-(N-morpholino)ethanesulfonic acid (MES), respectively. Especially when 1.5 g L⁻¹ of sodium acetate and 100 mM MES were added simultaneously, the production of hexanoic acid increased up to 2.99 g L⁻¹. Without adding sodium acetate, 2.75 g L⁻¹ of hexanoic acid production from d-galactitol was achieved using a coculture of Clostridium sp. BS-1 and one of the isolates, Clostridium sp. BS-7, in the presence of 100 mM MES. In addition, volatile fatty acid (VFA) production by Clostridium sp. BS-1 from d-galactitol and d-glucose was enhanced when a more reduced culture redox potential (CRP) was applied via addition of Na₂S·9H₂O.     

Ethanol fermentation of mixed-sugars using a two-phase, fed-batch process: method to minimize D-glucose repression of Candida shehatae D-xylose fermentations

Candida shehatae cells pre-grown on D-xylose simultaneously consumed mixtures of D-xylose and D-glucose, under both non-growing (anoxic) and actively growing conditions (aerobic), to produce ethanol. The rate of D-glucose consumption was independent of the D-xylose concentration for cells induced on D-xylose. However, the D-xylose consumption rate was approximately three times lower than the D-glucose consumption rate at a 50% D-glucose: 50% D-xylose mixture. Repression was not observed (substrate utilization rates were approximately equal) when the percentage of D-glucose and D-xylose was changed to 22% and 78%, respectively. In fermentations with actively growing cells (50% glucose and D-xylose), ethanol yields from D-xylose increased, the % D-xylose utilized increased, and the xylitol yield was significantly reduced in the presence of D-glucose, compared to anoxic fermentations (Y_ETOH,xylose = 0.2–0.40 g g⁻¹, 75–100%, and Y_xylitol = 0–0.2 g g⁻¹ compared to Y_ETOH,xylose = 0.15 g g⁻¹, 56%, Y_xylitol = 0.51 g g⁻¹, respectively). To increase ethanol levels and reduce process time, fed-batch fermentations were performed in a single stage reactor employing two phases: (1) rapid aerobic growth on D-xylose (μ = 0.32 h⁻¹) to high cell densities; (2) D-glucose addition and anaerobic conditions to produce ethanol (Y_ETOH,xylose = 0.23 g g⁻¹). The process generated high cell densities, 2 × 10⁹ cells ml⁻¹, and produced 45–50 g L⁻¹ ethanol within 50 h from a mixture of D-glucose and D-xylose (compared to 30 g L⁻¹ in 80 h in the best batch process). The two-phase process minimized loss of cell viability, increased D-xylose utilization, reduced process time, and increased final ethanol levels compared to the batch process. Received 23 February 1998/ Accepted in revised form 15 July 1998     

Effect of growth rate on the production of<Emphasis Type="SmallCaps">l</Emphasis>-proline in the fed-batch culture of<Emphasis Type="Italic">Corynebacterium acetoacidophilum</Emphasis>

Corynebacterium acetoacidophilum RYU3161 was cultivated in al-histidine-limited fed-batch culture. To investigate the effect of cell growth on thel-proline production, 5l fed-batch culture was performed using an exponential feeding rate to obtain the specific growth rates (μ) of 0.04, 0.06, 0.08, and 0.1 h⁻¹. The results show that the highest production ofl-proline was obtained at μ=0.04 h⁻¹. The specificl-proline production rate (Q_p) increased proportionally as a function of the specific growth rate, but decreased after it revealed the maximum value at μ=0.08 h⁻¹. Thus, the highest productivity ofl-proline was 1.66 g L⁻¹ h⁻¹ at μ=0.08 h⁻¹. The results show that the production of L-proline inC. acetoacidophilum RYU3161 has mixed growth-associated characteristics.     

The effect of complex carbon and nitrogen, salt, Tween-80 and acetate on delta-endotoxin production by a Bacillus thuringiensis subsp kurstaki

Delta-endotoxin production by a strain of Bacillus thuringiensis subsp kurstakion complex media based on crude gruel and fish meal was investigated. High proteolytic activities were concomitantly produced with the bioinsecticide. In such complex media, the repressive regulation due to readily consumed carbon sources was partially overcome. In order to improve substrate assimilation, 0.5 g L⁻¹ sodium chloride and 0.1% Tween-80 were supplemented to the production medium, increasing delta-endotoxin yields when using gruel concentrations below 59 g L⁻¹. At and beyond 75 g L⁻¹ gruel, delta-endotoxin yields were not affected in the presence of 0.5 g L⁻¹ NaCl and 0.1% Tween-80, but proteolytic activity yields were remarkably reduced. Thus, the use of sodium chloride and Tween-80 allowed reduction of the initial gruel concentration to 42 g L⁻¹ for the production of 3350 mg L⁻¹ delta-endotoxin, while it was only 3800 mg L⁻¹ with 92 g L⁻¹ gruel. Moreover, similar to 0.5 g L⁻¹ NaCl and 0.1% Tween-80, the use of 10 g L⁻¹ sodium acetate significantly improved delta-endotoxin production and also reduced the proteolytic activity to 250 U ml⁻¹. Received 05 November 1998/ Accepted in revised form 19 August 1999     

Increased astaxanthin production by a Phaffia rhodozyma mutant grown on date juice from Yucca fillifera

The wild strain and the astaxanthin-overproducing mutant strain 25–2 of Phaffia rhodozyma were analyzed in order to assess their ability to grow and synthesize astaxanthin in a minimal medium composed of g L⁻¹: KH₂PO₄ 2.0; MgSO₄ 0.5; CaCl₂ 0.1; urea 1.0 and supplemented with date juice of Yucca fillifera as a carbon source (yuca medium). The highest astaxanthin production (6170 μg L⁻¹) was obtained at 22.5 g L⁻¹ of reducing sugars. The addition of yeast extract to the yuca medium at concentrations of 0.5–3.0 g L⁻¹ inhibited astaxanthin synthesis. The yuca medium supported a higher production of astaxanthin, 2.5-fold more than that observed in the YM medium. Journal of Industrial Microbiology & Biotechnology (2000) 24, 187–190. Received 14 July 1999/ Accepted in revised form 02 December 1999     

Biotechnological production of <Emphasis Type="SmallCaps">l</Emphasis>-ribose from <Emphasis Type="SmallCaps">l</Emphasis>-arabinose

l-Ribose is a rare and expensive sugar that can be used as a precursor for the production of l-nucleoside analogues, which are used as antiviral drugs. In this work, we describe a novel way of producing l-ribose from the readily available raw material l-arabinose. This was achieved by introducing l-ribose isomerase activity into l-ribulokinase-deficient Escherichia coli UP1110 and Lactobacillus plantarum BPT197 strains. The process for l-ribose production by resting cells was investigated. The initial l-ribose production rates at 39°C and pH 8 were 0.46 ± 0.01 g g⁻¹ h⁻¹ (1.84 ± 0.03 g l⁻¹ h⁻¹) and 0.27 ± 0.01 g g⁻¹ h⁻¹ (1.91 ± 0.1 g l⁻¹ h⁻¹) for E. coli and for L. plantarum, respectively. Conversions were around 20% at their highest in the experiments. Also partially purified protein precipitates having both l-arabinose isomerase and l-ribose isomerase activity were successfully used for converting l-arabinose to l-ribose.     

Isolation of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> mutants for heterologous protein production from a double proteinase gene disruptant

The recombinant Pichia pastoris harboring an improved methionine adenosyltransferase (MAT) shuffled gene was employed to biosynthesize S-adenosyl-l-methionine (SAM). Two l-methionine (l-Met) addition strategies were used to supply the precursor: the batch addition strategy (l-Met was added separately at three time points) and the continuous feeding strategies (l-Met was fed continuously at the rate of 0.1, 0.2, and 0.5 g l⁻¹ h⁻¹, respectively). SAM accumulation, l-Met conversion rate, and SAM productivity with the continuous feeding strategies were all improved over the batch addition strategy, which reached 8.46 ± 0.31 g l⁻¹, 41.7 ± 1.4%, and 0.18 ± 0.01 g l⁻¹ h⁻¹ with the best continuous feeding strategy (0.2 g l⁻¹ h⁻¹), respectively. The bottleneck for SAM production with the low l-Met feeding rate (0.1 g L⁻¹ h⁻¹) was the insufficient l-Met supply. The analysis of the key enzyme activities indicated that the tricarboxylic acid cycle and glycolytic pathway were reduced with the increasing l-Met feeding rate, which decreased the adenosine triphosphate (ATP) synthesis. The MAT activity also decreased as the l-Met feeding rate rose. The reduced ATP synthesis and MAT activity were probably the reason for the low SAM accumulation when the l-Met feeding rate reached 0.5 g l⁻¹ h⁻¹.     

Pullulan production from deproteinized whey by Aureobasidium pullulans

Aureobasidium pullulans P56 was investigated using an adaptation technique and a mixed culture system. The adaptation of A. pullulans and the mixed cultures of A. pullulans and/or Lactobacillus brevisX20, Debaryomyces hansenii 194 and Aspergillus niger did not increase the production of polysaccharide. Enzymic hydrolysis of lactose in deproteinized whey gave a higher polysaccharide concentration and polysaccharide yield than acidic hydrolysed lactose. Maximum polysaccharide concentration (11.0 ± 0.5 g L⁻¹), biomass dry weight (10.5 ± 0.4 g L⁻¹), polysaccharide yield (47.2 ± 1.8%) and sugar utilization (93.2 ± 2.8%) were achieved using enzyme-hydrolysed whey (pH 6.5) containing 25 g L⁻¹ lactose and supplemented with K₂HPO₄ 0.5%, L-glutamic acid 1%, olive oil 2.5%, and Tween 80 0.5%. In this case the pullulan content of the crude polysaccharide was 40%. Received 16 December 1997/ Accepted in revised form 12 March 1999     

Plant-growth-promoting compounds produced by two agronomically important strains of <Emphasis Type="Italic">Azospirillum brasilense</Emphasis>, and implications for inoculant formulation

We evaluated phytohormone and polyamine biosynthesis, siderophore production, and phosphate solubilization in two strains (Cd and Az39) of Azospirillum brasilense used for inoculant formulation in Argentina during the last 20 years. Siderophore production and phosphate solubilization were evaluated in a chemically defined medium, with negative results. Indole 3-acetic acid (IAA), gibberellic acid (GA₃), and abscisic acid (ABA) production were analyzed by gas chromatography-mass spectrometry. Ethylene, polyamine, and zeatin (Z) biosynthesis were determined by gas chromatography-flame ionization detector and high performance liquid chromatography (HPLC-fluorescence and -UV), respectively. Phytohormones IAA, Z, GA₃, ABA, ethylene, and growth regulators putrescine, spermine, spermidine, and cadaverine (CAD) were found in culture supernatant of both strains. IAA, Z, and GA₃ were found in all two strains; however, their levels were significantly higher (p < 0.01) in Cd (10.8, 2.32, 0.66 μg ml⁻¹). ABA biosynthesis was significantly higher (p < 0.01) in Az39 (0.077 μg ml⁻¹). Ethylene and polyamine CAD were found in all two strains, with highest production in Cd cultured in NFb plus l-methionine (3.94 ng ml⁻¹ h⁻¹) and Az39 cultured in NFb plus l-lysine (36.55 ng ml⁻¹ h⁻¹). This is the first report on the evaluation of important bioactive molecules in strains of A. brasilense as potentially capable of direct plant growth promotion or agronomic yield increase. Az39 and Cd showed differential capability to produce the five major phytohormones and CAD in chemically defined medium. This fact has important technological implications for inoculant formulation as different concentrations of growth regulators are produced by different strains or culture conditions.     

Biofilm formation on brass coupons exposed to a cooling system of an oil refinery

Brass coupons (70% Cu 30% Zn) were exposed to a cooling freshwater system of an oil refinery, in order to investigate susceptibility of the metal to biofilm formation. The coupons were fixed on bypasses at points which allowed the circulation of makeup, cooling and return water. The number of aerobic, anaerobic and sulfate-reducing bacteria was determined in both the planktonic and the sessile phases. Maximum bacterial concentrations were detected in the cooling water, corresponding to 2.1 ± 0.1 × 10⁶ CFU ml⁻¹ (planktonic phase) and 1.3 ± 0.2 × 10⁵ CFU cm⁻² (sessile phase) for aerobic bacteria and to 3.2 ± 0.3 × 10⁵ cells ml⁻¹ (planktonic phase) and 6.2 ± 0.7 × 10⁵ cells cm⁻² (sessile phase) for anaerobic bacteria. Sulfate-reducing bacteria (SRB) were observed only in the planktonic phase, being found in greater numbers in the return water. Scanning electron microscopy (SEM) analysis indicated that biofilm formation occurred at the three monitored sites and showed a diversity in cell morphology. Nonetheless, no evidence of corrosion was observed on the brass coupons during the experimental period. Received 22 May 1997/ Accepted in revised form 19 September 1997     

Mineralization of pentachlorophenol in a contaminated soil by Pseudomonas sp UG30 cells encapsulated in κ-carrageenan

A fermentation process in Escherichia coli for production of supercoiled plasmid DNA for use as a DNA vaccine was developed using an automated feed-back control nutrient feeding strategy based on dissolved oxygen (DO) and pH. The process was further automated through a computer-aided data processing system to regulate the cell growth rate by controlling interactively both the nutrient feed rate and agitation speed based on DO. The process increased the total yield of the plasmid DNA by approximately 10-fold as compared to a manual fed-batch culture. The final cell yield from the automated process reached 60 g L⁻¹ of dry cell weight (OD₆₀₀ = 120) within 24 h. A plasmid DNA yield of 100 mg L⁻¹ (1.7 mg g⁻¹ cell weight) was achieved by using an alkaline cell lysis method. Plasmid yield was confirmed using High Performance Liquid Chromatography (HPLC) analysis. Because cells had been grown under carbon-limiting conditions in the automated process, acetic acid production was minimal (below 0.01 g L⁻¹) throughout the fed-batch stage. In contrast, in the manual process, an acid accumulation rate as high as 0.36 g L⁻¹ was observed, presumably due to the high nutrient feed rates used to maintain a maximum growth rate. The manual fed-batch process produced a low cell density averaging 10–12 g L⁻¹ (OD₆₀₀ = 25–30) and plasmid yields of 5–8 mg L⁻¹ (approximately 0.7 mg g⁻¹ cells). The improved plasmid DNA yields in the DO- and pH-based feed-back controlled process were assumed to be a result of a combination of increased cell density, reduced growth rate (μ) from 0.69 h⁻¹ to 0.13 h⁻¹ and the carbon/nitrogen limitation in the fed-batch stage. The DO- and pH-based feed-back control, fed-batch process has proven itself to be advantageous in regulating cell growth rate to achieve both high cell density and plasmid yield without having to use pure oxygen. The process was reproducible in triplicate fermentations at both 7-L and 80-L scales. Received 22 March 1996/ Accepted in revised form 20 September 1996     

Evaluation of sugar cane hemicellulose hydrolyzate for cultivation of yeasts and filamentous fungi

Sugar cane bagasse hemicellulosic fraction submitted to hydrolytic treatment with 100 mg of sulfuric acid per gram of dry mass, at 140°C for 20 min, was employed as a substrate for microbial protein production. Among the 22 species of microorganisms evaluated, Candida tropicalis IZ 1824 showed TRS consumption rate of 89.8%, net cell mass of 11.8 g L⁻¹ and yield coefficient (Y_x/s) of 0.50 g g⁻¹. The hydrolyzate supplemented with rice bran (20.0 g L⁻¹), P₂O₅ (2.0 g L⁻¹) and urea (2.0 g L⁻¹) provided a TRS consumption rate of 86.3% and a cell mass of 8.4 g L⁻¹. At pH 4.0 cellular metabolism was inhibited, whereas at pH 6.0 the highest yield was obtained. The presence of furfural (2.0 g L⁻¹) hydroxymethylfurfural (0.08 g L⁻¹) and acetic acid (3.7 g L⁻¹) in the hydrolyzate did not interfere with cultivation at pH 6.0. Received 25 October 1996/ Accepted in revised form 10 March 1997     

Production of curdlan using sucrose or sugar cane molasses by two-step fed-batch cultivation of Agrobacterium species

Maltose and sucrose were efficient carbon sources for the production of curdlan by a strain of Agrobacterium sp. A two-step, fed-batch operation was designed in which biomass was first produced, followed by curdlan production which was stimulated by nitrogen limitation. There exists an optimal timing for nitrogen limitation for curdlan production in the two-step, fed-batch operation. Maximum curdlan production (60 g L⁻¹) was obtained from sucrose with a productivity of 0.2 g L⁻¹ h⁻¹ when nitrogen was limited at a cell concentration of 16.0 g L⁻¹. It was also noted that the curdlan yield from sucrose was as high as 0.45 g curdlan g⁻¹ sucrose, and the highest specific production rate was 1.0 g curdlan g⁻¹ cells h⁻¹ right after nitrogen limitation. Of particular importance was the use of molasses as a cheap carbon source to produce curdlan in the two-step, fed-batch cultivation. As high as 42 g L⁻¹ of curdlan with a yield of 0.35 g curdlan g⁻¹ total sugar was obtained after 120 h of fed-batch cultivation. Received 20 August 1996/ Accepted in revised form 26 November 1996     

Phytohormone production by three strains of <Emphasis Type="Italic">Bradyrhizobium japonicum</Emphasis> and possible physiological and technological implications

The aim of this work was to evaluate phytohormone biosynthesis, siderophores production, and phosphate solubilization in three strains (E109, USDA110, and SEMIA5080) of Bradyrhizobium japonicum, most commonly used for inoculation of soybean and nonlegumes in USA, Canada, and South America. Siderophore production and phosphate solubilization were evaluated in selective culture conditions, which had negative results. Indole-3-acetic acid (IAA), gibberellic acid (GA₃), and abscisic acid (ABA) production were analyzed by gas chromatography–mass spectrometry (GC-MS). Ethylene and zeatin biosynthesis were determined by GS–flame ionization detection and high-performance liquid chromatography (HPLC-UV), respectively. IAA, zeatin, and GA₃ were found in all three strains; however, their levels were significantly higher (p < 0.01) in SEMIA5080 (3.8 μg ml⁻¹), USDA110 (2.5 μg ml⁻¹), and E109 (0.87 μg ml⁻¹), respectively. ABA biosynthesis was detected only in USDA110 (0.019 μg ml⁻¹). Ethylene was found in all three strains, with highest production rate (18.1 ng ml⁻¹ h⁻¹) in E109 cultured in yeast extract mannitol medium plus l-methionine. This is the first report of IAA, GA₃, zeatin, ethylene, and ABA production by B. japonicum in pure cultures, using quantitative physicochemical methodology. The three strains have differential capability to produce the five major phytohormones and this fact may have an important technological implication for inoculant formulation.     

Pelagic primary production during summer along 65 to 72°N off West Greenland

The distribution of phytoplankton biomass and primary production were studied during summer 1993 at 16 stations from 65 to 72°N off West Greenland, ranging more than 900 km. Hydrography, nutrients and chlorophyll a profiles revealed a significant change in structure from south to north. Nitrate was depleted in the euphotic zone at most stations except close to the ice edge (West Ice) or close to outflow from large glaciers. The vertical distribution of phosphate followed that of nitrate, but was never depleted. Despite two stations with relatively high surface concentrations, silica showed the same distribution as the other two nutrients. In the south, chlorophyll a concentration and primary production were lower than north of Disko Bay (69°N), associated with a well-mixed versus a salinity-generated stratification, respectively. In Vaigat, a high-production station was identified, (st. 910, 69°52′69N–51°30′61W) with a chlorophyll a concentration in the euphotic zone of >13 μg l⁻¹ and an area primary production of 3.2 g C m⁻² day⁻¹. This is seldom encountered in arctic waters and was presumably due to nutrient-rich melt-water originating from the Iluliíssat Glacier. The overall primary production for the studied area was 67–3207 mg C m⁻² day⁻¹ (mean ± SD=341± 743 mg C m⁻² day⁻¹), which is within the range of the few results published for West Greenland and eastern Canadian Arctic waters. Accepted: 24 October 1998     

Enhanced l-lysine production in threonine-limited continuous culture of Corynebacterium glutamicum by using gluconate as a secondary carbon source with glucose

In order to improve the production rate of l-lysine, a mutant of Corynebacterium glutamicum ATCC 21513 was cultivated in complex medium with gluconate and glucose as mixed carbon sources. In a batch culture, this strain was found to consume gluconate and glucose simultaneously. In continuous culture at dilution rates ranging from 0.2 h⁻¹ to 0.25 h⁻¹, the specific l-lysine production rate increased to 0.12 g g⁻¹ h⁻¹ from 0.1 g g⁻¹ h⁻¹, the rate obtained with glucose as the sole carbon source [Lee et al. (1995) Appl Microbiol Biotechnol 43:1019–1027]. It is notable that l-lysine production was observed at higher dilution rates than 0.4 h⁻¹, which was not observed when glucose was the sole carbon source. The positive effect of gluconate was confirmed in the shift of the carbon source from glucose to gluconate. The metabolic transition, which has been characterized by decreased l-lysine production at the higher glucose uptake rates, was not observed when gluconate was added. These results demonstrate that the utilization of gluconate as a secondary carbon source improves the maximum l-lysine production rate in the threonine-limited continuous culture, probably by relieving the limiting factors in the lysine synthesis rate such as NADPH supply and/or phosphoenolpyruvate availability. Received: 16 May 1997 / Received revision: 28 August 1997 / Accepted: 29 August 1997     

An optimization study of carotenoid production by Rhodotorula glutinis DBVPG 3853 from substrates containing concentrated rectified grape must as the sole carbohydrate source

A multivariate statistical approach was employed for the optimization of conditions for carotenoid production by Rhodotorula glutinis DBVPG 3853 from a substrate containing concentrated rectified grape must as the sole carbohydrate source. Several experimental parameters (carbohydrate, yeast autolysate and salt concentrations, and pH) were tested at two levels by following a fractional factorial design. Carotenogenesis was most sensitive to both initial pH and yeast autolysate concentration. A Central Composite Design experiment was then performed by obtaining both second-order polynomial models and isoresponse diagrams where initial pH and yeast autolysate concentration were considered as variables. In this way it was possible to determine the conditions (pH = 5.78, yeast autolysate = 4.67 g L⁻¹) which maximize both the concentration of total carotenoids and that of β-carotene (6.9 mg L⁻¹ and 1100 μg L⁻¹ of culture fluid, respectively, after 120 h of fermentation). Journal of Industrial Microbiology & Biotechnology (2000) 24, 41–45. Received 23 February 1999/ Accepted in revised form 14 September 1999     

Analysis and optimization of a two-substrate fermentation for xylitol production using Candida tropicalis

Xylitol, a functional sweetener, was produced from xylose using Candida tropicalisATCC 13803. A two-substrate fermentation was designed in order to increase xylitol yield and volumetric productivity. Glucose was used initially for cell growth followed by conversion of xylose to xylitol without cell growth and by-product formation after complete depletion of glucose. High glucose concentrations increased volumetric productivity by reducing conversion time due to high cell mass, but also led to production of ethanol, which, in turn, inhibited cell growth and xylitol production. Computer simulation was undertaken to optimize an initial glucose concentration using kinetic equations describing rates of cell growth and xylose bioconversion as a function of ethanol concentration. Kinetic constants involved in the equations were estimated from the experimental results. Glucose at 32 g L⁻¹ was estimated to be an optimum initial glucose concentration with a final xylose concentration of 86 g L⁻¹ and a volumetric productivity of 5.15 g-xylitol L⁻¹ h⁻¹. The two-substrate fermentation was performed under optimum conditions to verify the computer simulation results. The experimental results were in good agreement with the predicted values of simulation with a xylitol yield of 0.81 g-xylitol g-xylose⁻¹ and a volumetric productivity of 5.06 g-xylitol L⁻¹ h⁻¹. Received 16 June 1998/ Accepted in revised form 28 February 1999     

Arctic cyanobacteria and limnological properties of their environment: Bylot Island, Northwest Territories, Canada (73°N, 80°W)

Cyanobacteria were a major constituent of phototrophic communities in the lakes, ponds and streams of Bylot Island, in the Canadian high Arctic. The waters spanned a range of temperatures (1.8–16.8°C in late July), pH regimes (6.2–9.2) and conductivities (1.5–1700 μS cm⁻¹) but nutrient concentrations were consistently low (< 1 μg dissolved reactive P l⁻¹ at all sites; < 10 μg NO₃-N l⁻¹ at most sites). Picoplanktonic species (Synechococcus spp.) were often the numerical dominants in the plankton, and periphytic filamentous species (Oscillatoriaceae) commonly formed thick (5–50 mm) benthic mats. Bloom-forming species of cyanobacteria were either absent or poorly represented even in Chla-rich ponds. The total community biomass ranged from 0.1 to 29.8 μg Chla l⁻¹ in the plankton and from 1.1 to 34.8 μg Chla cm⁻² in the benthos. The in vivo absorbance characteristics of isolates from these environments indicated a genetically diverse range of species in each group of Arctic cyanobacteria. Growth versus irradiance relationships were determined for each of the isolates and similarly revealed large genetic differences (maximum growth rates from 0.17 to 0.61 day⁻¹), even between morphologically identical taxa. A comparison of nutrients, pigment concentrations and species composition underscores the strong similarities between freshwater ecosystems in the north and south polar zones. Received: 3 June 1996 / Accepted: 3 November 1996