The masticatory handicap of wearing removable dentures in elderly men

Objective: This study aimed at describing the masticatory handicap of wearing removable dentures measured by some masticatory tests and the intake of hard and soft foods. Materials and methods: The subjects were participants in a comprehensive health examination of 67–68‐year‐old men living in Malmö, Sweden. Four hundred eighty‐three men took part in a clinical oral examination which recorded the number of teeth and removable dentures. One hundred and one had complete dentures in both jaws and 131 had removable partial dentures in different combinations. Masticatory tests used almonds to record the number of stokes to the first swallow, and two‐coloured chewing gums for recording bolus kneading and shaping. A nutritionist paid a home visit to assess dietary habits including the consumption of hard and soft foods. The data could be split into groups of different tooth and denture situations which were large enough to enable statistical analysis to be carried out. The results of a regression analysis of the group with different numbers of natural teeth (NT) and no removable dentures could be used as a reference for correlation with the masticatory capacity of removable denture wearers. Results: Number of strokes to the first swallow revealed no masticatory limitations of wearing removable dentures, while chewing gum colour‐mixing and shaping revealed more differentiated impairments equivalent to the function of five to 16 teeth in a remaining natural dentition. Hard food intake for the removable denture groups was comparable to 17–19 NT. Soft food intake was not influenced by denture wearing. In a ranking of oral conditions, those with more than 24 NT had the highest test values for all tests, and those with complete sets of dentures the lowest except for the number of strokes to the first swallow of an almond. Conclusion: Removable denture wearing can be regarded as a handicap when measured with objective masticatory tests using chewing gum and the intake of hard foods. The number of chewing strokes to the first swallow of an almond and the intake of soft foods is not affected by the wearing of removable dentures.     

Two-dimensional finite element analysis of stresses developed in the supporting tissues under complete dentures using teeth with different cusp angulations

Statement of problem: The selection of appropriate teeth for complete denture occlusion is very important for long‐term success, and adequate maintenance of the residual alveolar ridge. Purpose: The purpose of this study was to determine the stress generated underneath the complete denture by altering the cuspal angulations of the denture teeth. Material and methods: A two‐dimensional finite element model of a coronal section of maxillary and mandibular complete dentures, mucosa and alveolar bone in the first molar region was designed. The occlusal aspect of the denture teeth was altered to make 33°, 20°, 0° cuspal angulation. All the nodes at the bases of maxillary and mandibular alveolar bone of finite element analysis models were restrained in all directions. A functional occlusal load of 50 N was applied through the mandibular model base. To design these models and to analyse them, EMRC’s NISA II finite element analysis computer software was used. In these models, the elements were selected (a, b, c, d, e, f) in the region where it was necessary to determine the stresses generated in both the maxillary and mandibular portions. Results: The results were interpreted as Von Mises stresses and were observed in pre‐defined areas. The stress patterns observed within model with each type of posterior occlusion, showed unique variations as well as some similarities. Conclusion: Stresses of greater magnitude were observed in cuspal teeth, 33° and 20° respectively, where as 0° teeth showed a slightly less magnitude of stress generated.     

Responses of jawbone to pressure

Objective: To provide a literature review of bone resorption of edentulous jaws focusing on responses to pressure. Background: After the extraction of all teeth in a jaw there is a continuous reduction of the residual ridge. The individual variation of bone resorption is great, and the aetiology is complex and not yet well understood. Materials and methods: A search of the literature published up to May 2003 on bone resorption and pressure was performed using PubMed/Medline. Results: Animal studies have demonstrated that excessive and constant pressure induces bone resorption. Recent experimental research has indicated that bone resorption is a pressure‐regulated phenomenon with a lower threshold for continuous than for intermittent pressure. Clinical studies have suggested that residual ridge resorption is due more to the effects of denture wearing than to disuse atrophy. However, the results of leaving out dentures at night are not conclusive. Nor does the literature offer any strong evidence for the so‐called combination syndrome, which has been described as a result of unfavourable loading. Clinical studies using multivariate analyses indicate that female gender and systemic factors may be of greater importance than oral and denture factors. Implant‐supported prostheses have a bone preserving effect rather than the continuing resorption under complete dentures. Conclusions: The best way to reduce bone resorption is to avoid total extraction, preserve a few teeth and fabricate overdentures. In edentulous jaws, placement of implant‐supported prostheses will lead to less bone loss and may even promote bone growth. To increase our knowledge of residual ridge resorption extended experimental, clinical and statistical methods will be needed, preferably including collaboration between dental and medical researchers.     

Short-necked plesiosaurs of the family Polycotylidae from the Campanian of the Saratov Region

Fragments of the anterior part of a mandibular rostrum and a maxillary bone of the plesiosaur Polycotylidae indet. from the Karyakino and Beloe Ozero localities of the Saratov Region (Upper Cretaceous, Campanian) are described. The specimens belong to a relatively long-snouted polycotylid with a mandibular symphysis incorporating 13 pairs of teeth. A unique feature of this plesiosaur is the fact that, in the symphysis, the splenial extends to the very anterior end of the rostrum. The polycotylid from the Campanian of the Saratov Region is probably closely related or identical to Georgiasaurus from the Santonian of the Penza Region, in which structural details of the mandibular symphysis remain uncertain.     

Decreasing of residual alveolar ridge height in complete denture wearers. A five year follow up study

The resorption of the residual alveolar ridges is a chronic and continuous process of bone remodeling. The aim of this study was to analyse the rate of residual ridge resorption at different sites in the both jaws in complete denture wearers, through a five-year period of denture wearing. Residual ridge changes were measured on successive lateral cephalograms at 5 measurement points of the maxilla and the mandible. The first lateral radiograph was obtained at the delivery of complete dentures. The second lateral cephalogram was obtained after five years of denture wearing. Measurements were performed using a calibrated grid. The results of this study showed the existence of a significant alveolar ridge resorption at all five measurement points of the maxilla and the mandible. The observed variables, such as body mass index and the night time denture wearing had no significant influence on the rate of residual alveolar ridge resorption (p > 0.05). The duration of edentulousness had a significant influence on the rate of residual ridge resorption with significantly higher amounts of alveolar bone height decrease in those patients who had lost the last remaining teeth more recently.     

A clinical and anatomical study of the location of the mental foramen in adult Chinese mandibles

One hundred mandibles of adult Chinese cadavers of both sexes without missing teeth, alveolar bone resorption and malposition of teeth were studied. The anatomical location of each mandibular mental foramen was measured by using a combination of three previous methods. Our results showed that the location of the mental foramen below the apex of the lower second premolar (relation IV: 58.98%) was the most common. On average, the distance between the most anterior portion of the anterior border of the mental foramen and the mandibular symphysis was 28.06 mm, between the most anterior portion of the anterior border of the mental foramen and the posterior border of the ramus 74.14 mm, between the inferior border of the mental foramen and the lower border of the mandibular body 14.70 mm, between the superior border of the mental foramen and the bottom of the lower second premolar socket 2.50 mm. The distance across the mental foramen between the alveolar crest and the lower border of the mandibular body was 30.29 mm. Our results were compared with those of other investigators. The significance of identifying the anatomical location of the mental foramen in dental practice is discussed.     

Spatial patterning of bone stiffness in the anterior mandibular corpus of Macaca fascicularis: Implications for models of bone adaptation

Elastic modulus of bone from the anterior mandibular corpus was determined via microindentation in a mixed-sex ontogenetic sample (N = 14) of Macaca fascicularis. This investigation focused on the hypothesis that material heterogeneity in the macaque mandibular symphysis—provided an accounting of age and sex variation—is explicable as a means to homogenize strains in this region. Experimental data and theoretical models of masticatory loading indicate that in the absence of material compensation, large strain gradients exist in the anterior mandibular corpus of macaques, particularly between lingual and labial cortical plates owing to the effects of lateral transverse bending. Microindentation data indicate that juvenile macaques possess less stiff bone than their subadult and adult counterparts; however, sex differences in elastic modulus are not apparent. Anisotropy variation is idiosyncratic; that is, there is not a common pattern of variation in stiffness sampled among orthogonal planes across individuals. Similarly, differences in stiffness between lingual and labial cortical plates, as well as differences among alveolar, midcorpus, and basal regions are inconsistently observed. Consequently, we find little evidence in support of the hypothesis that spatial variation in bone stiffness functions to homogenize strains in the anterior corpus; in fact, in some individuals, this spatial variation serves to exacerbate, rather than to minimize, strain gradients. The mechanical benefit of elastic modulus variation in the macaque mandibular symphysis is unclear; this variation may not confer adaptive benefit in terms of structural integrity despite the fact that such variation has discernible functional consequences. Am J Phys Anthropol 156:649–660, 2015. © 2014 Wiley Periodicals, Inc.     

Biometric ratio in estimating widths of maxillary anterior teeth derived after correlating anthropometric measurements with dental measurements

doi: 10.1111/j.1741‐2358.2012.00648.x Biometric ratio in estimating widths of maxillary anterior teeth derived after correlating anthropometric measurements with dental measurements Objective: To correlate dental measurements i.e. combined mesiodistal width of six maxillary anterior teeth with facial measurements i.e. inner canthal distance, interpupillary distance and intercommissural width and acquire a biometric ratio to serve as a preliminary guide in selection of the maxillary anterior teeth. Background: In the absence of pre‐extraction records, the resultant denture can lead to patient dissatisfaction towards the aesthetic appeal of their dentures. The maxillary anterior teeth play a pivotal role in denture aesthetics. Various techniques and biometric ratios have been described in literature for selection of the maxillary anteriors. This study derives a biometric ratio for the same, obtained after correlating anthropometric measurements with dental measurements. Materials and methods: Two standardized digital photographs of the face were generated; one, when the facial muscles were relaxed and the other, when the subject was smiling; thereby, revealing the maxillary anterior teeth upto the canine tip. Inner canthal distance, interpupillary distance, intercommissural distance, distance between the tips of the maxillary canines and distance between the distal surfaces of the canines were measured. On the cast, the distance between tips of maxillary canines and distance between distal surfaces of maxillary canines were noted. The data was analysed using Spearman’s rank correlation coefficient. Results: A high correlation was found between the intercommissural measurement with distance between the tips of the canines on the photograph and between the tips of the canines on the cast with the interpupillary distance, giving a biometric ratio of 1:1.35 and 1:1.41 respectively. The least correlation was between the inner canthal distance and the tips of the canines measured on the photograph. Conclusions: Extra oral anthropometric measurements of the interpupillary distances and the intercommissural distances with the help of standardised photographs can help us determine the combined widths of the anterior teeth accurately, thus aiding their selection in the absence of pre‐extraction records.     

The course of the inferior alveolar nerve in the normal human mandibular ramus and in patients presenting for cosmetic reduction of the mandibular angles

This study was undertaken to quantify the path of the inferior alveolar nerve in the normal human mandible and in the mandibles of patients presenting for cosmetic reduction of the mandibular angles. The goals were: (1) to provide normative information that would assist the surgeon in avoiding injury to the nerve during surgery; (2) to characterize gender differences in the normal population; and (3) to compare the course of the nerve in the normal population to its course in a group of patients who presented with a complaint of "square face." The study was based upon the computerized tomographic scans of 10 normal patients (six men, four women) and 8 patients (all women) complaining of "square face." Using AnalyzePC 2.5 imaging software, the mandibles were segmented and the position of the nerve was recorded within its osseous canal in the mandibular ramus on each axial slice in which it was identifiable. Distances were calculated between the nerve and the anterior, posterior, lateral, and medial cortices. The positions of the lateral ramus prominence and the lowest point on the sigmoid notch were also recorded. The position of the mental foramen was recorded in relation to the nearest tooth, and the three-dimensional surface distances from the foramen to the alveolar bone, the inferior border of the mandible, and the mandibular symphysis were determined. The distances from the entrance of the nerve into the mandible to the lateral ramus prominence and the lowest point on the sigmoid notch were calculated. Summary statistics were obtained, comparing differences in gender. The nerve was identifiable in each ramus over a mean distance of 12.7 mm. On average, the lateral ramus prominence was 0.3 mm higher on the caudad-cephalad axis than the point at which the nerve entered the bone, whereas the location of the lowest point on the sigmoid notch was 16.6 mm above the nerve. The average distances from the nerve to the anterior, posterior, medial, and lateral cortices were 11.6, 12.1, 1.8, and 4.7 mm, respectively. Gender differences were significant for all of these except the medial cortex to nerve distance. On average, the mental foramen exited the body of the mandible immediately below the second premolar and the average surface distances from the foramen to the symphysis, the most cephalad alveolar bone, and the inferior border of the body were 30.9, 14.2, and 19.3 mm, respectively. With regard to the patients presenting for mandibular angle reduction, there were a few statistically significant but small scalar differences from normal controls.     

可摘局部义齿戴入后义齿区微生态的改变

可摘局部义齿是口腔活动修复中运用最久最为广泛的一种修复方式,其通过卡环的固位,基托的稳定,连接体的连接,可以使人工牙在患者缺牙间隙发挥相应的咀嚼功能。但是,可摘局部义齿作为一个外源性的异物戴入患者口内后,由于其理化性质与口腔正常环境差别极大,并且占据了口腔中的天然间隙,势必会导致口腔内环境的相应改变。口腔微生物依附于口腔内环境,与宿主共生。当口腔内环境变化时,口腔微生态也会产生相关的变化。研究可摘局部义齿戴入后口腔内微生态的变化可以使我们更好地评估可摘局部义齿的适应证,并指导我们新义齿的设计及开发方向。目前相关研究已相当充分,本文就可摘局部义齿戴入后,口腔微生态的变化作一简单综述。     

The masseteric jaw-jerk reflex in older dentate subjects and edentulous denture wearers

The aim of the present study was to investigate any variations in the jaw-jerk reflex in edentulous subjects wearing complete dentures, compared to an age and sex-matched dentate group. The reflex was elicited by chin taps in 22 older dentate subjects with mean age 61.3 years and in 22 denture wearers with mean age 63.1 years. Surface electromyographic recordings were obtained from the masseter muscle of the preferred chewing side during mandibular rest and at moderate clenching (40% of the individual maximum clenching masseteric EMG activity). A jaw-jerk reflex was recorded in all subjects at least once, and its occurrence during clenching was reduced compared to rest. The occurrence of the reflex was however increased in the denture wearers in both experimental conditions, while minor differences were observed in the values for latency, duration and amplitude between the two dental status groups. These results suggest that under the present experimental conditions the periodontal ligament receptors might inhibit reflex activity. Multiple sensory interactions are expected in denture wearing. However a particular source of sensory feedback is provided by the stimulation of mucosal receptors from the acrylic denture base. Since the occurrence of the jaw-jerk at clench in the denture wearers was also reduced compared to the rest experiments, a potential inhibitory effect of the mucosal receptors can be speculated. According to the findings in the present study the loss of teeth and the rehabilitation with complete dentures do not severely disrupt the reflex activity investigated.     

应用电子散斑干涉术对单端固定桥的受载分析

本文目的是对单端固定桥的运动及其受力状态进行试验性研究。采用电子散斑干涉术这一新的光学技术分别对下颌单端固定桥修复前后进行４种垂直加载测试,观察实时显示的散斑干涉条纹图,并测量相应牙槽骨处的离面位移。     

全口义齿修复后造成松软牙槽嵴和／或牙槽嵴粘膜增生的原因初探

目的:研究松软牙槽嵴和/或牙槽嵴粘膜增生形成的原因,探讨预防和治疗措施。方法:对180例戴用全口义齿一年以上的患者进行临床调查研究。研究内容包括缺牙原因,义齿戴用的时间,牙槽嵴粘膜情况,松软牙槽嵴和/或牙槽嵴粘膜增生发生的部位,人工牙的类型等。结果:①180例全口义齿病例中,有松软牙槽嵴者20例,占22％,男:女=6:4,其中下牙槽嵴占60％,上牙槽嵴占,20％,上下牙槽嵴均有者占20％。患牙槽嵴粘膜增生者共8例,占4.4％,最多发生在下舌侧,其次为下唇沟。同时患有松软牙槽嵴和牙槽嵴粘膜增生的有4例,占患牙槽嵴粘膜增生病例的一半。②在患松软牙槽嵴的病例中,人工牙为塑料牙和瓷牙各占50％。缺牙原因为牙周病者共12例,占60％,龋病2例,占10％,龋病-牙周病者8例,占30％。③在患松软牙槽嵴的病例中,下颌牙槽嵴条件均为差,上颌牙槽嵴条件均为中或差。在患增生的粘膜组织的病例中,75％病例义齿固位为中或差,25％义齿固位为较好。结论:发病原因与患者缺牙原因,牙槽嵴部位,牙槽嵴条件,人工牙类型等有关。因此可以认为,牙槽嵴粘膜松软是戴用全口义齿后出现的不可忽视的问题,而牙槽嵴粘膜松软和/或增生的粘膜组织是相辅相成的。所以一副全口义齿不是一劳永逸的,使用一定的时间后需要更换,特别对牙槽嵴条件较差的患者     

Complete denture wearing and fractures among edentulous patients treated in university clinics

doi: 10.1111/j.1741‐2358.2011.00551.x
Complete denture wearing and fractures among edentulous patients treated in university clinics Objective: The prevalence of wearing and fracture of complete dentures was evaluated among edentulous patients treated in two dental schools in Brazil. Background: Acceptance and wearing of complete dentures are related to adaptive behaviour of edentulous patients. However, one reason that could interfere with the wearing dentures is their potential to fracture, which is still a common complication in denture rehabilitation practice. Material and methods: Two hundred and twenty‐four edentulous patients rehabilitated with complete dentures from 2000 to 2005 in Araçatuba and Araraquara Dental School, University of State of São Paulo, were assessed in 2006 and 2007 to answer a questionnaire about wearing and fracture of their dentures. Statistical analysis were performed using Epi Info software and chi‐squared test to compare maxillary and mandibular data (α = 0.05). Results: Almost 26% of the patients did not wear their dentures, and among the remainder, the majority wore the maxillary denture. About 30% of the dentures were fractured, with higher prevalence in the maxillary arch (p = 0.003). Conclusions: Discontinuation of wearing dentures was quite high, especially considering the treatment which was carried out in university clinics. Prevalence of fractures was also high, greater for the maxillary denture, and was one of the main reasons for non‐wearing of complete dentures.     

Cephalometric study of mandibular dimorphism in living population in South-West France

The role of the mandible in sex determination is still poorly defined because of the plasticity of this bone. We carried out a teleradiographic study of the mandibles of 63 living white subjects, measuring bigonial breadth, bicondylar breadth (anterior radiographs), mandibular symphysis height, mandibular length, articulare-gonion height, mandibular ramus height and mandibular body length (lateral radiographs). All these paramters showed significant sexual dimorphism (p<0.001 in all cases). Mandibular symphysis height had the highest percentage of dimorphism (19.44%). Based on this study, two discriminant functions were calculated, one of which used all the measurement and the other, two. These functions made it possible to determine the sex of 87.3% of the sample studied, using the mandible alone.     

Oral mucosal lesions in denture wearers

doi:10.1111/j.1741‐2358.2009.00289.x
Oral mucosal lesions in denture wearers Objective: To determine the prevalence of oral mucosal lesions (OMLs) and denture‐related mucosal lesions (DMLs) in denture wearers and to co‐relate the prevalence with age, gender, type of denture and any systemic conditions. Materials and methods: Dental records of 380 denture wearers were retrospectively reviewed for OMLs and DMLs. Results: We found 45% of the denture wearers had DMLs and 60.8% had OMLs not related to denture wearing. Although the prevalence of DMLs was higher in complete denture wearers than in partial denture wearers (49% vs. 42.2%), this difference was not significant. The most common DMLs were traumatic ulcer (19.5%) and denture‐induced stomatitis (18.1%). When analysed by type, traumatic ulcer, denture hyperplasia, frictional keratosis and candidiasis were more common in complete denture wearers, whereas denture‐induced stomatitis was more common in partial denture wearers. Frictional keratosis was more common in men than in women. The prevalence of OMLs not related to denture wearing was higher in complete denture wearers than in partial denture wearers, and the most common OML was fissured tongue (27.6%). No association between DMLs and systemic conditions or xerostomic drugs was noted. Conclusion: No differences in the prevalence of DMLs in association with denture type were found. The prevalence of OMLs not related to denture wearing was higher in complete denture wearers than in partial denture wearers. This difference was affected by age, and the data were similar to the findings observed in the elderly.     

Complete denture hygiene and nocturnal wearing habits among patients attending the Prosthodontic Department in a Dental University in Brazil

Gerodontology 2010; doi: 10.1111/j.1741‐2358.2010.00369.x Complete denture hygiene and nocturnal wearing habits among patients attending the Prosthodontic Department in a Dental University in Brazil Objective: The aim of this study was to evaluate the overnight wearing and cleaning habits of complete denture wearers. Background: Successful complete denture treatment can be achieved when the patients are motivated and aware of appropriate denture wear and hygiene. Materials and methods: A sample of 224 complete denture wearers (162 women) aged 37–89 years was studied. Inclusion criteria comprised edentulous subjects who had received their new complete dentures between 2000 and 2005 in the Dental Clinic of the Araçatuba and Araraquara Dental School, São Paulo State University. Ethical approval was sought and granted. Subjects were interviewed using questions related to overnight denture wearing and denture cleaning habits. Possible statistical relationships among some of items were analysed by the chi‐square test at 5% significance level. Results: Of the patients, 55.8% removed their dentures during the overnight period and 88% did this every day. Among them, 66.4% removed both dentures. Most of the patients used brushing with toothpaste (105 patients – 46.87%) as a cleaning method. More than a half of the subjects (63.4%) showed biofilm and calculus on their dentures. Conclusion: The patients need instructions and motivation concerning denture hygienic and denture removal overnight.     

The functional morphology of the anterior masticatory apparatus in tree‐gouging marmosets (cebidae,primates)

Although all genera of Callitrichinae feed on tree exudates, marmosets (Callithrix and Cebuella) use specialized anterior teeth to gouge holes in trees and actively stimulate exudate flow. Behavioral studies demonstrate that marmosets use large jaw gapes but do not appear to generate large bite forces (relative to maximal ability) during gouging. Nonetheless, the anterior teeth of marmosets likely experience different loads during gouging compared to nongouging platyrrhines. We use histological data from sectioned teeth, μCTs of jaws and teeth, and in vitro tests of symphyseal strength to compare the anterior masticatory apparatus in Callithrix to nongouging tamarins (Saguinus) and other cebids. We test the hypotheses that (1) marmoset anterior teeth are adapted to accommodate relatively high stresses linked to dissipating gouging forces and (2) the mandibular symphysis does not provide increased load resistance ability compared with closely related nongouging platyrrhines. Differences in decussation between Callithrix and Saguinus are greatest in the anterior teeth, suggesting an increased load resistance ability specifically in incisor and canine enamel of Callithrix. Callithrix lower incisor crowns are labiolingually thicker suggesting increased bending resistance in this plane and improved wedging ability compared with Saguinus. Anterior tooth roots are larger relative to symphyseal bone volume in Callithrix. Anterior tooth root surface areas also are larger in marmosets for their symphyseal volume, but it remains unclear whether this relative increase is an adaptation for dissipating dental stresses versus a growth‐related byproduct of relatively elongated incisors. Finally, simulated jaw loading suggests a reduced ability to withstand external forces in the Callithrix symphysis. The contrast between increased load resistance ability in the anterior dentition versus relatively reduced symphyseal strength (1) suggests a complex loading environment during gouging, (2) highlights the possibility of distinct loading patterns in the anterior teeth versus the symphysis, and (3) points to a potential mosaic pattern of dentofacial adaptations to tree gouging. J. Morphol., 2011. © 2011 Wiley‐Liss, Inc.     

Maxillary complete denture movement during chewing in mandibular removable partial denture wearers

Objectives: To evaluate the pattern of maxillary complete denture movement during chewing for free‐end removable partial dentures (RPD) wearers, compared to maxillary and mandibular complete denture wearers. Materials and methods: Eighteen edentulous participants (group I) and 10 volunteers with bilateral posterior edentulous mandibles (group II) comprised the sample. Measures of mean denture movement and its variability were obtained by a kinesiographic instrument K6‐I Diagnostic System, during the mastication of bread and a polysulphide block. Data were analysed using two‐way anova (α = 0.05). Results: Upper movement during chewing was significantly lower for group II, regardless of the test food. The test food did not influence the vertical or lateral position of the denture bases, but more anterior dislocation was found when polysulphide blocks were chewed. Group II presented lower intra‐individual variability for the vertical axis. Vertical displacement was also more precise with bread as a test food. Conclusion: It can be concluded that mandibular free‐end RPD wearers show smaller and more precise movements than mandibular complete denture wearers.