Polygenic mutation in Drosophila melanogaster: Mapping spontaneous mutations affecting sensory bristle number

Our ability to predict long-term responses to artificial and natural selection, and understand the mechanisms by which naturally occurring variation for quantitative traits is maintained, depends on detailed knowledge of the properties of spontaneous polygenic mutations, including the quantitative trait loci (QTL) at which mutations occur, mutation rates, and mutational effects. These parameters can be estimated by mapping QTL that cause divergence between mutation-accumulation lines that have been established from an inbred base population and selected for high and low trait values. Here, we have utilized quantitative complementation to deficiencies to map QTL at which spontaneous mutations affecting Drosophila abdominal and sternopleural bristle number have occurred in 11 replicate lines during 206 generations of divergent selection. Estimates of the numbers of mutations were consistent with diploid per-character mutation rates for bristle traits of 0.03. The ratio of the per-character mutation rate to total mutation rate (0.023) implies that >2% of the genome could affect just one bristle trait and that there must be extensive pleiotropy for quantitative phenotypes. The estimated mutational effects were not, however, additive and exhibited dependency on genetic background consistent with diminishing epistasis. However, these inferences must be tempered by the potential for epistatic interactions between spontaneous mutations and QTL affecting bristle number on the deficiency-bearing chromosomes, which could lead to overestimates in numbers of QTL and inaccurate inference of gene action.     

The genetic architecture of Drosophila sensory bristle number

We have mapped quantitative trait loci (QTL) for Drosophila mechanosensory bristle number in six recombinant isogenic line (RIL) mapping populations, each of which was derived from an isogenic chromosome extracted from a line selected for high or low, sternopleural or abdominal bristle number and an isogenic wild-type chromosome. All RILs were evaluated as male and female F(1) progeny of crosses to both the selected and the wild-type parental chromosomes at three developmental temperatures (18 degrees, 25 degrees, and 28 degrees ). QTL for bristle number were mapped separately for each chromosome, trait, and environment by linkage to roo transposable element marker loci, using composite interval mapping. A total of 53 QTL were detected, of which 33 affected sternopleural bristle number, 31 affected abdominal bristle number, and 11 affected both traits. The effects of most QTL were conditional on sex (27%), temperature (14%), or both sex and temperature (30%). Epistatic interactions between QTL were also common. While many QTL mapped to the same location as candidate bristle development loci, several QTL regions did not encompass obvious candidate genes. These features are germane to evolutionary models for the maintenance of genetic variation for quantitative traits, but complicate efforts to understand the molecular genetic basis of variation for complex traits.     

POLYGENIC MUTATION IN DROSOPHILA MELANOGASTER: ESTIMATES FROM DIVERGENCE AMONG INBRED STRAINS

A highly inbred line of Drosophila melanogaster was subdivided into 25 replicate sublines, which were independently maintained for 100 generations with 10 pairs of unselected flies per generation. The polygenic mutation rate (V_M) for two quantitative traits, abdominal and sternopleural bristle number, was estimated from divergence among sublines at 10 generation intervals from generations 30-100, and from response of each line to divergent selection after more than 65 generations of mutation accumulation. Estimates of V_M averaged over males and females both from divergence among lines and from response to selection within lines were 3.3 × 10^-3 V_E for abdominal bristles and 1.5 × 10^-3 V_E for sternopleural bristles, where V_E is the environmental variance. The actual rate of production of mutations affecting these traits may be considerably higher if the traits are under stabilizing selection, and if mutations affecting bristle number have deleterious effects on fitness. There was a substantial component of variance for sex × mutant effect interaction and the sublines evolved highly significant mutational variation in sex dimorphism of abdominal bristle number. Pleiotropic effects on sex dimorphism may be a general property of mutations at loci determining bristle number.     

QTL for the species-specific male and female genital morphologies in Ohomopterus ground beetles

Animals with internal fertilization often exhibit marked diversification in genital morphology among closely related species. However, our knowledge of the genetic architecture underlying genital evolution is still limited. We constructed genetic linkage maps and analysed quantitative trait loci (QTL) for F₂ hybrids of two closely related species of the carabid beetles Carabus (Ohomopterus) iwawakianus and C. (O.) maiyasanus, which show matching male and female genital shapes within species, but marked differences in genital morphologies between species. The linkage maps comprised both amplified fragment length polymorphism and microsatellite markers. Composite interval mapping to detect QTL for three traits of male copulatory piece (length, width, weight) and two traits for female vaginal appendix (length, width) resulted in the detection of one to five significant QTL for each trait. The QTL explained large proportions of phenotypic variance. Thus, the interspecific difference in the genital morphologies appeared to be determined by relatively small numbers of genes with large genetic effects. QTL of different traits for the same or different sexes co‐occurred on five of eight linkage groups with significant QTL; in particular, three QTL for different male and female genital traits occurred almost at the same position. Each of the male genital traits showed uniform signs of additive genetic effects, suggesting that directional selection has led to species‐specific morphologies. However, the signs of additive genetic effects in each female genital trait were not uniform, suggesting that coevolution between sexes is not necessarily concerted. This result requires further assessment because the sample size of F₂ females was small.     

Quantitative trait loci controlling phenotypes related to the perennial versus annual habit in wild relatives of maize

We used quantitative trait locus/loci (QTL) mapping to study the inheritance of traits associated with perennialism in a cross between an annual (Zea mays ssp. parviglumis) and a perennial (Z. diploperennis) species of teosinte. The most striking difference between these species is that Z. diploperennis forms rhizomes, whereas Z. mays ssp. parviglumis lacks these over-wintering underground stems. An F₂ population of 425 individuals was genotyped at 95 restriction fragment length polymorphism marker loci and the association between phenotype and genotype was analyzed by composite interval mapping. We detected a total of 38 QTL for eight traits. The number of QTL found for each trait ranged from two for rhizome formation to nine for tillering. QTL for six of the traits mapped near each other on chromosome 2, and QTL for four traits mapped near each other on chromosome 6, suggesting that these regions play an important role in the evolution of the perennial habit in teosinte. Most of the 38 QTL had small effects, and no single QTL showed a strikingly large effect. The map positions that we determined for rhizome formation and other traits in teosinte may help to locate corresponding QTL in pasture and turf grasses used as forage for cattle and for erosion control in agro-ecosystems.     

The nature of quantittative genetic variation revisited: Lessons from Drosophila bristles

Most characters that distinguish one individual from another, like height or weight, vary continuously in populations. Continuous variation of these ‘quantitative’ traits is due to the simultaneous segregation of multiple quantitative trait loci (QTLs) as well as environmental influences. A major challenge in human medicine, animal and plant breeding and evolutionary genetics is to identify QTLs and determine their genetic properties. Studies of the classic quantitative traits, abdominal and sternopleural bristle numbers of Drosophila, have shown that: (1) many loci have small effects on bristle number, but a few have large effects and cause most of the genetic variation; (2) ‘candidate’ loci involved in bristle development often have large quantitative effects on bristle number; and (3) alleles at QTLs affecting bristle number have variable degrees of dominance, interact with each other, and affect other quantitative traits, including fitness. Lessons learned from this model system will be applicable to studies of the genetic basis of quantitative variation in other species.     

Mapping species differences for adventitious rooting in a <Emphasis Type="Italic">Corymbia torelliana</Emphasis> × <Emphasis Type="Italic">Corymbia citriodora</Emphasis> subspecies <Emphasis Type="Italic">variegata</Emphasis> hybrid

Quantitative trait loci (QTL) detection was carried out for adventitious rooting and associated propagation traits in a second-generation outbred Corymbia torelliana × Corymbia citriodora subspecies variegata hybrid family (n = 186). The parental species of this cross are divergent in their capacity to develop roots adventitiously on stem cuttings and their propensity to form lignotubers. For the ten traits studied, there was one or two QTL detected, with some QTL explaining large amounts of phenotypic variation (e.g. 66% for one QTL for percentage rooting), suggesting that major effects influence rooting in this cross. Collocation of QTL for many strongly genetically correlated rooting traits to a single region on linkage group 12 suggested pleiotropy. A three locus model was most parsimonious for linkage group 12, however, as differences in QTL position and lower genetic correlations suggested separate loci for each of the traits of shoot production and root initiation. Species differences were thought to be the major source of phenotypic variation for some rooting rate and root quality traits because of the major QTL effects and up to 59-fold larger homospecific deviations (attributed to species differences) relative to heterospecific deviations (attributed to standing variation within species) evident at some QTL for these traits. A large homospecific/heterospecific ratio at major QTL suggested that the gene action evident in one cross may be indicative of gene action more broadly in hybrids between these species for some traits.     

Identification and characterization of QTL underlying whole-plant physiology in Arabidopsis thaliana: δ13C, stomatal conductance and transpiration efficiency

Water limitation is one of the most important factors limiting crop productivity world-wide and has likely been an important selective regime influencing the evolution of plant physiology. Understanding the genetic and physiological basis of drought adaptation is therefore important for improving crops as well as for understanding the evolution of wild species. Here, results are presented from quantitative trait loci (QTL) mapping of flowering time (a drought escape mechanism) and carbon stable isotope ratio (δ¹³C) (a drought-avoidance mechanism) in Arabidopsis thaliana. Whole-genome scans were performed using multiple-QTL models for both additive and epistatic QTL effects. We mapped five QTL affecting flowering time and five QTL affecting δ¹³C, but two genomic regions contained QTL with effects on both traits, suggesting a potential pleiotropic relationship. In addition, we observed QTL–QTL interaction for both traits. Two δ¹³C QTL were captured in near-isogenic lines to further characterize their physiological basis. These experiments revealed allelic effects on δ¹³C through the upstream trait of stomatal conductance with subsequent consequences for whole plant transpiration efficiency and water loss. Our findings document considerable natural genetic variation in whole-plant, drought resistance physiology of Arabidopsis and highlight the value of quantitative genetic approaches for exploring functional relationships regulating physiology.     

Quantitative trait loci for magnitude of the plasma cortisol response to confinement in rainbow trout

Better understanding of the mechanisms underlying interindividual variation in stress responses and their links with production traits is a key issue for sustainable animal breeding. In this study, we searched for quantitative trait loci (QTL) controlling the magnitude of the plasma cortisol stress response and compared them to body size traits in five F2 full‐sib families issued from two rainbow trout lines divergently selected for high or low post‐confinement plasma cortisol level. Approximately 1000 F2 individuals were individually tagged and exposed to two successive acute confinement challenges (1 month interval). Post‐stress plasma cortisol concentrations were determined for each fish. A medium density genome scan was carried out (268 markers, overall marker spacing less than 10 cM). QTL detection was performed using qtlmap software, based on an interval mapping method ( http://www.inra.fr/qtlmap ). Overall, QTL of medium individual effects on cortisol responsiveness (<10% of phenotypic variance) were detected on 18 chromosomes, strongly supporting the hypothesis that control of the trait is polygenic. Although a core array of QTL controlled cortisol concentrations at both challenges, several QTL seemed challenge specific, suggesting that responses to the first and to a subsequent exposure to the confinement stressor are distinct traits sharing only part of their genetic control. Chromosomal location of the steroidogenic acute regulatory protein (STAR) makes it a good potential candidate gene for one of the QTL. Finally, comparison of body size traits QTL (weight, length and body conformation) with cortisol‐associated QTL did not support evidence for negative genetic relationships between the two types of traits.     

Two-trait selection response with marker-based assortative mating

 Marker-based assortative mating (MAM) – the mating of individuals that have similar genotypes at random marker loci – can increase selection response for a single trait by 3–8% over random mating (RM). Genetic gain is usually desired for multiple traits rather than for a single trait. My objectives in this study were to (1) compare MAM, phenotypic assortative mating (PAM), and RM of selected individuals for improving two traits and (2) determine when MAM will be most useful for improving two traits. I simulated 20 generations of selecting 32 out of 200 individuals in an F₂ population. The individuals were selected based on an index (SI) of two traits and were intermated by MAM, PAM, or RM. I studied eight genetic models that differed in three contrasts: (1) weight, number of quantitative trait loci (QTL), and heritability (h ²) for each trait; (2) linkage of QTL for each trait; and (3) trait means of the inbred parents of the F₂. For SI and the two component traits, MAM increased short-term selection response by 5–8% in six out of the eight genetic models. The MAM procedure was least effective in two genetic models, wherein the QTL for one trait were unlinked to the QTL for the other trait and the parents of the F₂ had divergent means for each trait. The loss of QTL heterozygosity was much greater with MAM than with PAM or RM. Consequently, the advantage of MAM over RM dissipated after 5–7 generations. Differences were small between selection responses with PAM and RM. The MAM procedure can enhance short-term selection response for two traits when selection is not stringent, h ² is low, and the means of the parents of the F₂ are equal for each trait. Received: 10 June 1998 / Accepted: 5 August 1998     

QTL mapping of <Emphasis Type="Italic">Sclerotinia</Emphasis> midstalk-rot resistance in sunflower

In many sunflower-growing regions of the world, Sclerotinia sclerotiorum (Lib.) de Bary is the major disease of sunflower (Helianthus annuus L.). In this study, we mapped and characterized quantitative trait loci (QTL) involved in resistance to S. sclerotiorum midstalk rot and two morphological traits. A total of 351 F₃ families developed from a cross between a resistant inbred line from the germplasm pool NDBLOS and the susceptible line CM625 were assayed for their parental F₂ genotype at 117 codominant simple sequence repeat markers. Disease resistance of the F₃ families was screened under artificial infection in field experiments across two sowing times in 1999. For the three resistance traits (leaf lesion, stem lesion, and speed of fungal growth) and the two morphological traits, genotypic variances were highly significant. Heritabilities were moderate to high (h²=0.55–0.89). Genotypic correlations between resistance traits were highly significant (P<0.01) but moderate. QTL were detected for all three resistance traits, but estimated effects at most QTL were small. Simultaneously, they explained between 24.4% and 33.7% of the genotypic variance for resistance against S. sclerotiorum. Five of the 15 genomic regions carrying a QTL for either of the three resistance traits also carried a QTL for one of the two morphological traits. The prospects of marker-assisted selection (MAS) for resistance to S. sclerotiorum are limited due to the complex genetic architecture of the trait. MAS can be superior to classical phenotypic selection only with low marker costs and fast selection cycles.     

Detection of multiple quantitative trait loci and their pleiotropic effects in outbred pig populations

Background

Simultaneous detection of multiple QTLs (quantitative trait loci) may allow more accurate estimation of genetic effects. We have analyzed outbred commercial pig populations with different single and multiple models to clarify their genetic properties and in addition, we have investigated pleiotropy among growth and obesity traits based on allelic correlation within a gamete.

Methods

Three closed populations, (A) 427 individuals from a Yorkshire and Large White synthetic breed, (B) 547 Large White individuals and (C) 531 Large White individuals, were analyzed using a variance component method with one-QTL and two-QTL models. Six markers on chromosome 4 and five to seven markers on chromosome 7 were used.

Results

Population A displayed a high test statistic for the fat trait when applying the two-QTL model with two positions on two chromosomes. The estimated heritabilities for polygenic effects and for the first and second QTL were 19%, 17% and 21%, respectively. The high correlation of the estimated allelic effect on the same gamete and QTL test statistics suggested that the two separate QTL which were detected on different chromosomes both have pleiotropic effects on the two fat traits. Analysis of population B using the one-QTL model for three fat traits found a similar peak position on chromosome 7. Allelic effects of three fat traits from the same gamete were highly correlated suggesting the presence of a pleiotropic QTL. In population C, three growth traits also displayed similar peak positions on chromosome 7 and allelic effects from the same gamete were correlated.

Conclusion

Detection of the second QTL in a model reduced the polygenic heritability and should improve accuracy of estimated heritabilities for both QTLs.     

A Multi-Trait,Meta-analysis for Detecting Pleiotropic Polymorphisms for Stature,Fatness and Reproduction in Beef Cattle

Polymorphisms that affect complex traits or quantitative trait loci (QTL) often affect multiple traits. We describe two novel methods (1) for finding single nucleotide polymorphisms (SNPs) significantly associated with one or more traits using a multi-trait, meta-analysis, and (2) for distinguishing between a single pleiotropic QTL and multiple linked QTL. The meta-analysis uses the effect of each SNP on each of n traits, estimated in single trait genome wide association studies (GWAS). These effects are expressed as a vector of signed t-values (t) and the error covariance matrix of these t values is approximated by the correlation matrix of t-values among the traits calculated across the SNP (V). Consequently, t''V⁻¹t is approximately distributed as a chi-squared with n degrees of freedom. An attractive feature of the meta-analysis is that it uses estimated effects of SNPs from single trait GWAS, so it can be applied to published data where individual records are not available. We demonstrate that the multi-trait method can be used to increase the power (numbers of SNPs validated in an independent population) of GWAS in a beef cattle data set including 10,191 animals genotyped for 729,068 SNPs with 32 traits recorded, including growth and reproduction traits. We can distinguish between a single pleiotropic QTL and multiple linked QTL because multiple SNPs tagging the same QTL show the same pattern of effects across traits. We confirm this finding by demonstrating that when one SNP is included in the statistical model the other SNPs have a non-significant effect. In the beef cattle data set, cluster analysis yielded four groups of QTL with similar patterns of effects across traits within a group. A linear index was used to validate SNPs having effects on multiple traits and to identify additional SNPs belonging to these four groups.     

Mapping QTL, epistasis and genotype?×?environment interaction of antioxidant activity, chlorophyll content and head formation in domesticated lettuce (Lactuca sativa)

Fruits and vegetables are rich sources of antioxidants in human diets and their intake is associated with chronic disease prevention. Lettuce (Lactuca sativa L.) is a common vegetable in diets worldwide, but its nutritional content is relatively low. To elucidate the genetic basis of antioxidant content in lettuce, we measured the oxygen radical absorbance capacity (ORAC) and chlorophyll (Chl) content as a proxy of β-carotene in an F₈ recombinant inbred line (RIL) in multiple production cycles at two different production sites. Plants were phenotyped at the open-leaf stage to measure genetic potential (GP) or at market maturity (MM) to measure the influence of head architecture (‘head’ or ‘open’). Main effect quantitative trait loci (QTL) were identified at MM (three Chl and one ORAC QTL) and GP (two ORAC QTL). No main effect QTL for Chl was detected at GP, but epistatic interaction was identified in one pair of marker intervals for each trait at GP. Interactions with environment were also detected for both main and epistatic effects (two for main effect, and one for epistatic effect). Main effect QTL for plant architecture and nutritional traits at MM colocated to a single genomic region. Chlorophyll contents and ORAC values at MM were significantly higher and Chl a to Chl b ratios were lower in ‘open’ types compared to ‘head’ types. The nutritional traits assessed for GP showed a significant association with plant architecture suggesting pleiotropic effects or closely linked genes. Taken together, the antioxidant and chlorophyll content of lettuce is controlled by complex mechanisms and participating alleles change depending on growth stage and production environment.     

Quantitative trait analysis of seed yield and other complex traits in hybrid spring rapeseed (Brassica napus L.): 1. Identification of genomic regions from winter germplasm

The introgression of winter germplasm into spring canola (Brassica napus L.) represents a novel approach to improve seed yield of hybrid spring canola. In this study, quantitative trait loci (QTL) for seed yield and other traits were genetically mapped to determine the effects of genomic regions introgressed from winter germplasm into spring canola. Plant materials used comprised of two populations of doubled haploid (DH) lines having winter germplasm introgression from two related French winter cultivars and their testcrosses with a spring line used in commercial hybrids. These populations were evaluated for 2 years at two locations (Wisconsin, USA and Saskatchewan, Canada). Genetic linkage maps based on RFLP loci were constructed for each DH population. Six QTL were detected in the testcross populations for which the winter alleles increased seed yield. One of these QTL explained 11 and 19% of the phenotypic variation in the two Canadian environments. The winter allele for another QTL that increased seed yield was linked in coupling to a QTL allele for high glucosinolate content, suggesting that the transition of rapeseed into canola could have resulted in the loss of favorable seed yield alleles. Most QTL for which the introgressed allele decreased seed yield of hybrids mapped to genomic regions having homoeologous non-reciprocal transpositions. This suggests that allelic configurations created by these rearrangements might make an important contribution to genetic variation for complex traits in oilseed B. napus and could account for a portion of the heterotic effects in hybrids. Electronic Supplementary Material Supplementary material is available to authorised users in the online version of this article at .     

High-resolution mapping of quantitative trait loci for sternopleural bristle number in Drosophila melanogaster.

We have mapped quantitative trait loci (QTL) harboring naturally occurring allelic variation for Drosophila bristle number. Lines with high (H) and low (L) sternopleural bristle number were derived by artificial selection from a large base population. Isogenic H and L sublines were extracted from the selection lines, and populations of X and third chromosome H/L recombinant isogenic lines were constructed in the homozygous low line background. The polymorphic cytological locations of roo transposable elements provided a dense molecular marker map with an average intermarker distance of 4.5 cM. Two X chromosome and six chromosome 3 QTL affecting response to selection for sternopleural bristle number and three X chromosome and three chromosome 3 QTL affecting correlated response in abdominal bristle number were detected using a composite interval mapping method. The average effects of bristle number QTL were moderately large, and some had sex-specific effects. Epistasis between QTL affecting sternopleural bristle number was common, and interaction effects were large. Many of the intervals containing bristle number QTL coincided with those mapped in previous studies. However, resolution of bristle number QTL to the level of genetic loci is not trivial, because the genomic regions containing bristle number QTL often did not contain obvious candidate loci, and results of quantitative complementation tests to mutations at candidate loci affecting adult bristle number were ambiguous.     

Deciphering the genomic architecture of the stickleback brain with a novel multilocus gene‐mapping approach

Quantitative traits important to organismal function and fitness, such as brain size, are presumably controlled by many small‐effect loci. Deciphering the genetic architecture of such traits with traditional quantitative trait locus (QTL) mapping methods is challenging. Here, we investigated the genetic architecture of brain size (and the size of five different brain parts) in nine‐spined sticklebacks (Pungitius pungitius) with the aid of novel multilocus QTL‐mapping approaches based on a de‐biased LASSO method. Apart from having more statistical power to detect QTL and reduced rate of false positives than conventional QTL‐mapping approaches, the developed methods can handle large marker panels and provide estimates of genomic heritability. Single‐locus analyses of an F₂ interpopulation cross with 239 individuals and 15 198, fully informative single nucleotide polymorphisms (SNPs) uncovered 79 QTL associated with variation in stickleback brain size traits. Many of these loci were in strong linkage disequilibrium (LD) with each other, and consequently, a multilocus mapping of individual SNPs, accounting for LD structure in the data, recovered only four significant QTL. However, a multilocus mapping of SNPs grouped by linkage group (LG) identified 14 LGs (1–6 depending on the trait) that influence variation in brain traits. For instance, 17.6% of the variation in relative brain size was explainable by cumulative effects of SNPs distributed over six LGs, whereas 42% of the variation was accounted for by all 21 LGs. Hence, the results suggest that variation in stickleback brain traits is influenced by many small‐effect loci. Apart from suggesting moderately heritable (h² ≈ 0.15–0.42) multifactorial genetic architecture of brain traits, the results highlight the challenges in identifying the loci contributing to variation in quantitative traits. Nevertheless, the results demonstrate that the novel QTL‐mapping approach developed here has distinctive advantages over the traditional QTL‐mapping methods in analyses of dense marker panels.     

Quantitative trait loci and candidate genes associated with starch pasting viscosity characteristics in cassava (Manihot esculenta Crantz)

Starch pasting viscosity is an important quality trait in cassava (Manihot esculenta Crantz) cultivars. The aim here was to identify loci and candidate genes associated with the starch pasting viscosity. Quantitative trait loci (QTL) mapping for seven pasting viscosity parameters was carried out using 100 lines of an F₁ mapping population from a cross between two cassava cultivars Huay Bong 60 and Hanatee. Starch samples were obtained from roots of cassava grown in 2008 and 2009 at Rayong, and in 2009 at Lop Buri province, Thailand. The traits showed continuous distribution among the F₁ progeny with transgressive variation. Fifteen QTL were identified from mean trait data, with Logarithm of Odds (LOD) values from 2.77–13.01 and phenotype variations explained (PVE) from10.0–48.4%. In addition, 48 QTL were identified in separate environments. The LOD values ranged from 2.55–8.68 and explained 6.6–43.7% of phenotype variation. The loci were located on 19 linkage groups. The most important QTL for pasting temperature (PT) (qPT.1LG1) from mean trait values showed largest effect with highest LOD value (13.01) and PVE (48.4%). The QTL co‐localised with PT and pasting time (PTi) loci that were identified in separate environments. Candidate genes were identified within the QTL peak regions. However, the major genes of interest, encoding the family of glycosyl or glucosyl transferases and hydrolases, were located at the periphery of QTL peaks. The loci identified could be effectively applied in breeding programmes to improve cassava starch quality. Alleles of candidate genes should be further studied in order to better understand their effects on starch quality traits.     

Interval mapping of quantitative trait loci for reproductive,morphological, and seed traits of soybean (Glycine max L.)

Quantitative trait loci (QTL) were mapped in segregating progeny from a cross between two soybean (Glycine max (L.) Merr.) cultivars: Minsoy (PI 27.890) and Noir 1 (PI 290.136). The 15 traits analyzed included reproductive, morphological, and seed traits, seed yield and carbon isotope discrimination ratios (¹³C/¹²C). Genetic variation was detected for all of the traits, and transgressive segregation was a common phenomenon. One hundred and thirty-two linked genetic markers and 24 additional unlinked markers were used to locate QTL by interval mapping and one-way analysis of variance, respectively. Quantitative trait loci controlling 11 of the 15 traits studied were localized to intervals in 6 linkage groups. Quantitative trait loci for developmental and morphological traits (R1, R5, R8, plant height, canopy height, leaf area, etc.) tended to be clustered in three intervals, two of which were also associated with seed yield. Quantitative trait loci for seed oil were separated from all the other QTL. Major QTL for maturity and plant height were linked to RFLP markers R79 (31% variation) and G173 (53% variation). Quantitative trait loci associated with unlinked markers included possible loci for seed protein and weight. Linkage between QTL is discussed in relation to the heritability and genetic correlation of the traits.