Actinohivin, a novel anti-HIV protein from an actinomycete that inhibits syncytium formation: isolation, characterization, and biological activities

Blocking human immunodeficiency virus (HIV) entry into target cells is an important goal of HIV and acquired immune deficiency syndrome (AIDS) therapies. We have searched for anti-HIV substances from microorganisms using a syncytium formation assay system constructed with HeLa/CD4/Lac-Z and HeLa/T-env/Tat cells. We discovered a novel anti-HIV protein that inhibits syncytium formation, designated as actinohivin, from a cultured broth of a soil isolate, actinomycete strain K97-0003. ESI mass spectrometry of actinohivin isolated from the culture filtrate showed an ion with molecular mass of 12,520.3 Da. The amino acid sequence was determined by N-terminal Edman degradation of the intact protein and peptide fragments formed by endoproteinase digestions. Actinohivin consists of a 114-amino-acid chain that exhibits internal sequence triplication. Actinohivin inhibited both T-cell and macrophage tropic syncytium formation, with IC(50) values of 60 and 700 nM, respectively, and the cytopathic effect of HIV-1(IIIB) in MT-4 cells, with IC(50) value of 230 nM.     

Cloning, expression, sequence analysis and biochemical characterization of an autolytic amidase of Bacillus subtilis 168 trpC2.

By use of a functional assay for activity, an autolysin structural gene was cloned on a 3 kb EcoRI DNA fragment from a lambda gt11 expression library of Bacillus subtilis 168 trpC2 genomic DNA. Sequencing of the fragment showed five open reading frames, the central one of which encoded the lytic enzyme as found by subclone activity mapping and its homology to a recently sequenced autolysin gene. The protein had a deduced sequence of 272 amino acids and a molecular mass of 29957 Da. When expressed in Escherichia coli DH5 alpha, the protein was processed to a 21 kDa form, as estimated by renaturing SDS-PAGE. The autolysin was an N-acetylmuramyl-L-alanine amidase and its activity was MgCl2-dependent (20 mM optimum) and LiCl-sensitive. The enzyme could bind to and hydrolyse a wide range of peptidoglycan substrates isolated from Gram-positive bacteria; the binding was also MgCl2-dependent. Initial mapping experiments located the autolysin gene near aroD on the B. subtilis 168 chromosome.     

Molecular cloning and sequencing of a pectinesterase gene from Pseudomonas solanacearum

Two pectinesterase-positive Escherichia coli clones, differing in expression levels, were isolated from a genomic library of Pseudomonas solanacearum. Both clones contained a common DNA fragment which included the pectinesterase-encoding region. The different expression levels found with the two clones could be ascribed to different positioning of the pectinesterase gene with respect to a vector promoter. Restriction analysis, subcloning, and further exonuclease deletion mapping revealed that the genetic information for pectinesterase was located within a 1.3 kb fragment. A protein of 41 to 42 kDa was expressed from this fragment. Nucleotide sequence analysis of the respective region disclosed an open reading frame of 1188 bp. The deduced polypeptide had a calculated molecular mass of 41,004 Da, which is consistent with the determined size of the pectinesterase protein. The predicted amino acid sequence showed significant homology to pectinesterases from Erwinia chrysanthemi and tomato. In cultures of E. coli clones up to 30% of total pectinesterase activity was transported into the medium. However, no significant pectinesterase activity could be detected in the periplasm.     

S-layer protein of Lactobacillus acidophilus ATCC 4356: purification, expression in Escherichia coli, and nucleotide sequence of the corresponding gene.

The cell surfaces of several Lactobacillus species are covered by a regular layer composed of a single species of protein, the S-protein. The 43-kDa S-protein of the neotype strain Lactobacillus acidophilus ATCC 4356, which originated from the pharynx of a human, was purified. Antibodies generated against purified S-protein were used to screen a lambda library containing chromosomal L. acidophilus ATCC 4356 DNA. Several phages showing expression of this S-protein in Escherichia coli were isolated. A 4.0-kb DNA fragment of one of those phages hybridized to a probe derived from an internal tryptic fragment of the S-protein. The slpA gene, coding for the surface layer protein, was located entirely on the 4.0-kb fragment as shown by deletion analysis. The nucleotide sequence of the slpA gene was determined and appeared to encode a protein of 444 amino acids. The first 24 amino acids resembled a putative secretion signal, giving rise to a mature S-protein of 420 amino acids (44.2 kDa). The predicted isoelectric point of 9.4 is remarkably high for an S-protein but is in agreement with the data obtained during purification. The expression of the entire S-protein or of large, C-terminally truncated S-proteins is unstable in E. coli.     

Cloning and expression of the catalase gene from the anaerobic bacterium Desulfovibrio vulgaris (Miyazaki F)

We identified a gene encoding a catalase from the anaerobic bacteria Desulfovibrio vulgaris (Miyazaki F), and the expression of its gene in Escherichia coli. The 3.3-kbp DNA fragment isolated from D. vulgaris (Miyazaki F) by double digestion with EcoRI and SalI was found to produce a protein that binds protoheme IX as a prosthetic group in E. coli. This DNA fragment contained a putative open reading frame (Kat) and one part of another open reading frame (ORF-1). The amino acid sequence of the amino terminus of the protein purified from the transformed cells was consistent with that deduced from the nucleotide sequence of Kat in the cloned fragment of D. vulgaris (Miyazaki F) DNA, which may include promoter and regulatory sequences. The nucleotide sequence of Kat indicates that the protein is composed of 479 amino acids per monomer. The recombinant catalase was found to be active in the decomposition of hydrogen peroxide, as are other catalases from aerobic organisms, but its K(m) value was much greater. The hydrogen peroxide stress against D. vulgaris (Miyazaki F) induced the activity for the decomposition of hydrogen peroxide somewhat, so the catalase gene may not work effectively in vivo.     

Stable expression of meningococcal class 1 protein in an antigenically reactive form in outer membranes of Escherichia coli

The entire gene encoding the class 1 outer membrane protein of Neisseria meningitidis is located on a 2.2kb fragment, obtained on digestion of chromosomal DNA with Xbal. This Xbal fragment from strain MC50 (subtype P1-16), which had previously been cloned in bacteriophage M13, has been transferred to the plasmid vector pMTL20. The resulting plasmid (pPORA100) was propagated in Escherichia coli (JM109) and cell lysates were subjected to SDS-PAGE. Western blotting with anti-class 1 protein antibodies revealed constitutive expression of a protein of 41 kD, corresponding to the class 1 protein of the parent meningococcal strain, which was absent in the E. coli control. Fractionation of E. coli cells carrying the recombinant plasmid revealed that the protein was exclusively located in the outer membrane, and N-terminal amino acid analysis of the expressed protein revealed that normal processing of the signal peptide had occurred. Immuno-gold electron microscopy showed that the protective epitope recognized by a P1-16 subtype-specific monoclonal antibody was exposed in an antigenically reactive form on the surface of E. coli cells carrying plasmid pPORA100. In contrast, expression in E. coli of a second plasmid (pPORA104) lacking the coding sequence for the first 15 amino acids of the signal peptide resulted in accumulation of recombinant class 1 protein only in the cytoplasm of the cells. Thus the presence of the meningococcal signal sequence ensures expression of this meningococcal porin protein in an antigenically native conformation in outer membranes of E. coli, while its absence results in expression of a soluble protein.(ABSTRACT TRUNCATED AT 250 WORDS)     

Cloning, expression, and nucleotide sequence of the Escherichia coli K-12 ackA gene.

The Escherichia coli K-12 ackA gene, which encodes an acetate kinase, was cloned. The acetate kinase activities of ackA+ plasmid-containing strains were amplified 160- to 180-fold. The complete nucleotide sequence of the ackA gene was determined. It was deduced that the ackA gene coded for a protein of 400 amino acids with an Mr of 43,297. The ackA gene was found to be located about 15 kilobases upstream of the purF-folC-hisT region of the chromosome.     

Expression in Escherichia coli of a functional Dictyostelium myosin tail fragment

The amino acid sequence of the myosin tail determines the specific manner in which myosin molecules are packed into the myosin filament, but the details of the molecular interactions are not known. Expression of genetically engineered myosin tail fragments would enable a study of the sequences important for myosin filament formation and its regulation. We report here the expression in Escherichia coli of a 1.5- kb fragment of the Dictyostelium myosin heavy chain gene coding for a 58-kD fragment of the myosin tail. The expressed protein (DdLMM-58) was purified to homogeneity from the soluble fraction of E. coli extracts. The expressed protein was found to be functional by the following criteria: (a) it appears in the electron microscope as a 74-nm-long rod, the predicted length for an alpha-helical coiled coil of 500 amino acids; (b) it assembles into filamentous structures that show the typical axial periodicity of 14 nm found in muscle myosin native filaments; (c) its assembly into filaments shows the same ionic strength dependence as Dictyostelium myosin; (d) it serves as a substrate for the Dictyostelium myosin heavy chain kinase which phosphorylates myosin in response to chemotactic signaling; (e) in its phosphorylated form it has the same phosphoamino acids and similar phosphopeptide maps to those of phosphorylated Dictyostelium myosin heavy chain; (f) it competes with myosin for the heavy chain kinase. Thus, all the information required for filament formation and phosphorylation is contained within this expressed protein.     

The cloning, DNA sequence, and overexpression of the gene araE coding for arabinose-proton symport in Escherichia coli K12

A lambda placMu1 insertion was made into araE, the gene for arabinose-proton symport in Escherichia coli. A phage containing an araE'-'lacZ fusion was recovered from the lysogen and its restriction map compared with that of the 61-min region of the E. coli genome to establish the gene order thyA araE orf lysR lysA galR; araE was transcribed toward orf. A 4.8-kilobase SalI-EcoRI DNA fragment containing araE was subcloned from the phage lambda d(lysA+ galR+ araE+) into the plasmid vector pBR322. From this plasmid a 2.8-kilobase HincII-PvuII DNA fragment including araE was sequenced and also subcloned into the expression vector pAD284. The araE gene was 1416-base pairs long, encoding a hydrophobic protein of 472 amino acids with a calculated Mr of 51,683. The amino acid sequence was homologous with the xylose-proton symporter of E. coli and the glucose transporters from a human hepatoma HepG2 cell line, human erythrocytes, and rat brain. The overexpressed araE gene product was identified in Coomassie-stained sodium dodecyl sulfate-polyacrylamide gel electrophoresis gels of cell membranes as a protein of apparent Mr 35,000 +/- 1,150. Arabinose protected this protein against reaction with N-ethylmaleimide.     

Nucleotide sequence and expression in Escherichia coli of the Lactococcus lactis citrate permease gene.

The plasmid-encoded citrate determinant of the Lactococcus lactis subsp. lactis var. diacetylactis NCDO176 was cloned and functionally expressed in a Cit- Escherichia coli K-12 strain. From deletion derivative analysis, a 3.4-kilobase region was identified which encodes the ability to transport citrate. Analysis of proteins encoded by the cloned fragment in a T7 expression system revealed a 32,000-dalton protein band, which correlated with the ability of cells to transport citrate. Energy-dependent [1,5-14C]citrate transport was found with membrane vesicles prepared from E. coli cells harboring the citrate permease-expressing plasmid. The gene encoding citrate transport activity, citP, was located on the cloned fragment by introducing a site-specific mutation that abolished citrate transport and resulted in a truncated form of the 32,000-dalton expression product. The nucleotide sequence for a 2.2-kilobase fragment that includes the citP gene contained an open reading frame of 1,325 base pairs coding for a very hydrophobic protein of 442 amino acids, which shows no sequence homology with known citrate carriers.     

Cloning and characterization of the iutA gene which encodes ferric aerobactin receptor from marine Vibrio species

The iutA gene from marine Vibrio species SD004, which encoded a ferric aerobactin receptor for the uptake of iron(III), was cloned onto a multicopy plasmid, pUC 18, in Escherichia coli. Identification of the positive clone was achieved on the basis of its deferrization activity and was detected as a halo formation on the chrome azurol S (CAS)-containing selective plate. Nucleotide sequence analysis of the cloned DNA fragment revealed an open reading frame (ORF) which encoded a polypeptide of 706 amino acid residues, and the deduced molecular mass of this polypeptide was 77.906 kD. The amino acid sequence showed a 41% homology with that of the lutA protein from E. coli. The cloned gene was iutA, which encoded the ferric aerobactin receptor. Another incomplete ORF was found 100 bp upstream of the iutA gene, which was homologous (31 out of 49 amino acids) with the C-terminal region of the luc D protein of E. coli. It is suggested that aerobactin biosynthesis and the transport genes are located tandemly on the Vibrio chromosome and may form an aerobactin operon.     

The nucleotide sequence of a regulatory gene present on a plasmid in an enterotoxigenic Escherichia coli strain of serotype O167:H5

A DNA fragment that can functionally substitute for cfaD, the positive regulatory gene involved in expression of CFA/I fimbriae, has recently been cloned from an Escherichia coli strain of serotype O167:H5 that produces CS5 fimbriae. Nucleotide sequence determination showed that the fragment contained a gene, csvR (Coli Surface Virulence factor Regulator) homologous to the cfaD gene, which encoded for a protein of 301 amino acid residues. The csvR gene was found to be located between two different insertion sequences. Comparison of the amino acid sequence of the CsvR and CfaD proteins showed that CsvR is 34 amino acid residues longer at the C-terminus and, in the sequence, it also contains an insertion of two amino acid residues. The similarity between CfaD and Rns, the positive regulator of CS1 and CS2 expression, is much higher (97%) than between CsvR and CfaD (87%). This is reflected by the fact that the level of expression of CFA/I fimbriae induced by CsvR is not as high as when expression is induced by CfaD or Rns.     

Cloning, sequencing and expression of a sialidase gene from Clostridium sordellii G12

A 4.3 kb XbaI restriction fragment of DNA from Clostridium sordellii G12 hybridized with a synthetic oligonucleotide representing the N-terminus of the sialidase protein secreted by C. sordellii. This cloned fragment was shown to encode only part of the sialidase protein. The sialidase gene of C. sordellii was completed by a 0.7 kb RsaI restriction fragment overlapping one end of the XbaI fragment. After combining the two fragments and transformation of Escherichia coli, a clone that expressed sialidase was obtained. The nucleotide sequence of the sialidase gene of C. sordellii G12 was determined. The sequence of the 18 N-terminal amino acids of the purified extracellular enzyme perfectly matched the predicted amino acid sequence near the beginning of the structural gene. The amino acid sequence derived from the complete gene corresponds to a protein with a molecular mass of 44,735 Da. Upstream from the putative ATG initiation codon, ribosomal-binding site and promoter-like consensus sequences were found. The encoded protein has a leader sequence of 27 amino acids. The enzyme expressed in E. coli has similar properties to the enzyme isolated from C. sordellii, except for small differences in size and isoelectric point. Significant homology (70%) was found with a sialidase gene from C. perfringens.     

Cloning and sequencing of an Escherichia coli gene, nlp, highly homologous to the ner genes of bacteriophages Mu and D108.

An nlp (Ner-like protein) gene was isolated from Escherichia coli. The nucleotide sequence of a 1,342-base-pair chromosomal DNA fragment containing the nlp gene was analyzed. It contained two open reading frames; one encoded 91 amino acid residues with an Mr of 10,361, and the other (ORFX) encoded 131 amino acid residues of the carboxyl-terminal region of a truncated polypeptide. The amino acid sequence deduced from the DNA sequence of nlp was highly homologous (62 to 63%) to the Ner proteins of bacteriophages Mu and D108. The amino-terminal region of Nlp deduced from the complete open reading frame contained a presumed DNA-binding region. The nlp gene was located at 69.3 min on the E. coli genetic map.     

Characterization of hns genes from Erwinia amylovora

The small basic histone-like protein H-NS is known for bacteria to attenuate virulence of several animal pathogens. An hns homologue from E. amylovora was identified by complementing an E. coli hns-mutant strain with a cosmid library from E. amylovora. A 1.6 kb EcoRI-fragment complemented the mucoid phenotype and repressed the ss-glucosidase activity of E. coli PD32. The open reading frame encoding an H-NS-like protein of 134 amino acid was later shown to be located on plasmid pEA29 (McGhee and Jones 2000). A chromosomal hns gene was amplified with PCR consensus primers and localized near galU of E. amylovora. E. amylovora mutants were created by insertion of a resistance cassette, and the intact gene was inserted into a high copy number plasmid for constitutive expression. Purified chromosomal H-NS protein preferentially bound to a DNA fragment from the lsc region and bending was predicted for an adjacent fragment with the rlsB-promoter. Levan production was significantly increased by hns mutations. Synthesis of the capsular exopolysaccharide amylovoran and of levan were reduced, when hns from the E. amylovora plasmid was overexpressed. A mutation in chromosomal hns of E. amylovora increased amylovoran synthesis, and both mutations retarded symptom formation on immature pears.     

Cloning, purification, and properties of Candida albicans thymidylate synthase.

The thymidylate synthase (TS) gene was isolated from a genomic Candida albicans library by functional complementation of a Saccharomyces cerevisiae strain deficient in TS. The gene was localized on a 4-kilobase HindIII DNA fragment and was shown to be expressed in a Thy- strain of Escherichia coli. The nucleotide sequence of the TS gene predicted a protein of 315 amino acids with a molecular weight of 36,027. The gene was cloned into a T7 expression vector in E. coli, allowing purification of large amounts of C. albicans TS. It was also purified from a wild-type C. albicans strain. Comparison of several enzyme properties including analysis of amino-terminal amino acid sequences showed the native and cloned C. albicans TS to be the same.