Metal tolerance and biosorption potential of filamentous fungi isolated from metal contaminated agricultural soil

Heavy metal analysis of agricultural field soil receiving long-term (>20 years) application of municipal and industrial wastewater showed two- to five-fold accumulation of certain heavy metals as compared to untreated soil. Metal-resistant fungi isolated from wastewater-treated soil belonged to genera Aspergillus, Penicillium, Alternaria, Geotrichum, Fusarium, Rhizopus, Monilia and Trichoderma. Minimum inhibitory concentrations (MIC) for Cd, Ni, Cr, Cu, and Co were determined. The MIC ranged from 0.2 to 5 mg ml(-1) for Cd, followed by Ni (0.1-4 mg ml(-1)), Cr (0.3-7 mg ml(-1)), Cu (0.6-9 mg ml(-1)) and for Co (0.1-5 mg ml(-1)) depending on the isolate. Aspergillus and Rhizopus isolates were tested for their metal biosorption potential for Cr and Cd in vitro. Biosorption experiments were conducted with initial metal concentrations of 2, 4, 6 and 8 mM with a contact time of 4 h and wet fungal biomass (1-5 g) at 25 degrees C. Maximum biosorption of Cr and Cd ions was found at 6 mM initial metal concentration. Aspergillus sp.1 accumulated 1.20 mg of Cr and 2.72 mg of Cd per gram of biomass. Accumulation of these two metals by very tolerant Aspergillus sp.2 isolate was at par with relatively less tolerant Aspergillus sp.1 isolate. Rhizopus sp. accumulated 4.33 mg of Cr and 2.72 mg of Cd per g of biomass. The findings indicated promising biosorption of cadmium and chromium by the Rhizopus and Aspergillus spp. from aqueous solution. There is little, if any, correlation between metal tolerance and biosorption properties of the test fungi.     

The effects of Ni2+, Co2+, and Mn2+ on human serum butyrylcholinesterase

The effects of Ni2+, Co2+, and Mn2+ on human serum butyrylcholinesterase (BChE, acylcholine acylhydrolase E.C. 3.1.1.8) were investigated in this study. Inhibition kinetics of BChE were studied using butyrylthiocholine (BTCh) as substrate. The "1/v" versus "1/[BTCh]" plots in the absence (control plot) and in the presence of the metal ions intersected above 1/[BTCh]-axis for all trace elements. In addition, when the concentrations of the cations were increased at 4 mM BTCh, velocities decreased and drove to zero at high concentrations of the trace elements. These results demonstrate that Ni2+, Co2+, and Mn2+ are linear mixed-type inhibitors of BChE. alphaK(i) values have been determined as 53.20 mM,152.25 mM, and 190.24 mM for Ni2+, Mn2+, and Co2+, respectively, by using nonlinear regression analysis. From the comparison of alphaK(i) values of the trace elements, it can be said that BChE has more affinty to binding Ni2+ than Co2+ and Mn2+.     

Tolerance ofThiobacillus ferrooxidans to some metals

During iron oxidation,Thiobacillus ferrooxidans (Ferrobacillus ferrooxidans) was able to tolerate high concentrations of Zn, Ni, Cu, Co, Mn and Al (more than 10 g/litre). Silver and anions of tellurium, arsenic and selenium were toxic in concentrations of 50–100 mg/litre. Molybdenum (as molybdate), at concentrations above 5 mg/litre, was lethal toT. ferrooxidans. During thiosulphate oxidation, the tolerance to Zn, Ni and Co was greatly reduced, cobalt now being at least 2000 times more toxic, and the inhibitory levels of Zn and Ni being 600 mg Zn/litre and 150 mg Ni/litre. During sulphur oxidation, the tolerance to heavy metals extended to concentrations above 5 g/litre. Adaptation to Zn, Ni or Cu during iron oxidation was found to result in increased tolerance to some of the other metals also.     

Mn ions pass through calcium channels. A possible explanation

The divalent transition-metal cations Fe, Co, and Ni were used to test the hypothesis that Mn ions pass through calcium channels because Mn ions have a relatively low energy of hydration. The test ions were applied to the bath and comparisons were made of their effects on Ca or Mn spikes elicited from myoepithelial cells of the proventriculus of the polychaete worm Syllis spongiphila. Control experiments showed that (a) results obtained using deoxygenated solutions (required to stabilize Fe2+ ions) could be compared with those using solutions containing oxygen, and (b) the test cations did not measurably affect the electrical coupling between cells. Ca spikes were reversibly abolished by the test cations in the order of effectiveness: Fe (16.1 mM +/- 1.0, SE; n = 15) = Co (14.6 mM +/- 0.8; n = 27) less than Ni (8.3 mM +/- 0.7; n = 16). The test cations diminished Mn spikes by decreasing maximum rates of rise (Fe = Co less than Ni) and overshoot amplitudes (Fe less than Co less than Ni). The test cations also increased the current intensity required for Ca (Fe = Co less than Ni) or Mn spike initiation (Fe less than Co less than Ni). Since the energies of hydration of Fe, Co, and Ni increase stepwise from that of Mn, and the effectiveness of these ions in diminishing Ca and Mn spikes increased in the order Fe less than or equal to Co less than Ni, these data support the hypothesis that Mn ions pass through Ca channels because they shed waters of hydration relatively easily. An additional observation was that, at below-blocking concentrations, the test cations caused decreased duration of Mn spikes and increased duration of Ca spikes.     

Biosorption of Ni, Cr and Cd by metal tolerant Aspergillus niger and Penicillium sp. using single and multi-metal solution

Fungi including Aspergillus and Penicillium, resistant to Ni2+, Cd2+, and Cr6+ were isolated from soil receiving long-term application of municipal wastewater mix with untreated industrial effluents of Aligarh, India. Metal tolerance in term of minimum inhibitory concentration (MIC) was 125-550 microg/ml for Cd, 300-850 microg/ml for Ni and 300-600 microg/ml for Cr against test fungi. Two isolates, Aspergillus niger and Penicillium sp. were tested for their Cr, Ni and Cd biosorption potential using alkali treated, dried and powdered mycelium. Biosorption experiment was conducted in 100 ml of solution at three initial metal concentrations i.e., 2, 4 and 6 mM with contact time (18 hr) and pretreated fungal biomass (0.1g) at 25 degrees C. Biosorption of all metals was found higher at 4 mM initial metal concentration as compared to biosorption at 2 and 6 mM concentrations. At 4 mM initial metal concentration, chromium biosorption was 18.05 and 19.3 mg/g of Aspergillus and Penicillium biomasses, respectively. Similarly, biosorption of Cd and Ni ions was also maximum at 4 mM initial metal concentration by Aspergillus (19.4 mg/g for Cd and 25.05 mg/g of biomass for Ni) and Penicillium (18.6 mg/g for Cd and 17.9 mg/g of biomass for Ni). In general, biosorption of metal was influenced by initial metal concentration and type of the test fungi. The results indicated that fungi of metal contaminated soil have high level of metal tolerance and biosorption properties.     

High activity of NADP-dependent malic enzyme in mitochondria from abdomen muscle of the crayfish Orconectes limosus.

1. Mitochondria isolated from abdomen muscle of crayfish Orconectes limosus exhibit malic enzyme activity in the presence of L-malate, NADP and Mn2+ ions after addition of Triton X-100. Under optimal conditions about 230 nmole of reduced NADP and an equivalent amount of pyruvate are produced per min per mg of mitochondrial protein. 2. The pH optimum for decarboxylation of L-malate is about 7.5. 3. The apparent Km for L-malate, NADP and Mn2+ ions was found to be 0.66, 0.012, and 0.0025 mM, respectively. 4. The requirement for Mn2+ can be replaced by Mg2+, Co2+ and Ni2+ ions; however, higher concentrations of these ions than Mn2+ are required for a full stimulation of malic enzyme activity. 5. Oxaloacetate and pyruvate inhibited the enzyme activity in a competitive manner with apparent Ki values of 0.05 mM and 5.4 mM, respectively.     

Metal Tolerance and Accumulation Ability of the Ni Hyperaccumulator Streptanthus polygaloides Gray (Brassicaceae)

High concentrations of metals occur in some plant species (termed hyperaccumulators), such as the Ni hyperaccumulator Streptanthus polygaloides. We determined the tolerance of S. polygaloides to, and its accumulation abilities for, six metals (Ni, Zn, Cu, Co, Mn, and Pb). Potting mix concentrations used for all metals ranged from 0 to 1200 μg/g dry weight. For Ni, a treatment of 1600 μg/g was included. For Mn, treatments of 1600, 2000, and 2500 μg/g also were used, and for Pb these concentrations plus 3500 μg/g were included. Germination, plant number per pot, and size at days 30 and 39, number of plants at the end of the experiment (day 49), flower production, and metal concentration in the aboveground biomass were documented. Lead and Ni showed no consistent effects on plant performance, but yielded increased tissue metal concentrations. Streptanthus polygaloides was more sensitive to Co, Cu, and Zn, as ≥ 400 mg/g significantly suppressed plant growth, survival, and flower production. Tissue metal concentrations also were increased to maxima of 1500 μg Co/g, 120 μg Cu/g, and 6000 μg Zn/g. Manganese affected S. polygaloides less markedly, as ≥ 800 mg/kg decreased growth, survival, and flower production. Maximum tissue Mn concentration was 2900 μg/g. We concluded that S. polygaloides would be an appropriate phytoextractor for soils contaminated with Ni or low levels of Co but would not be useful for Cu, Zn, Mn, and Pb.     

Measurement of growth and iron deposition in Sphaerotilus discophorus.

Aspects of the physiology of iron deposition of an iron-precipitating strain of Sphaerotilus were investigated in laboratory culture to characterize the process. Measurement of growth (incorporated L-[3H]alanine) and iron deposition (incorporated 59Fe) demonstrated that Sphaerotilus exhibit a characteristic temporal pattern of iron deposition, which is delayed until the latter portion of the exponential or the onset of the stationary growth phase. The growth rate (mu=0.17 h-1) was apparently independent of the iron concentration in the medium. There was, furthermore, no direct correlation between the iron concentration and final cell protein yield. It was concluded from experiments involving growth on artificial substrata (glass cover slips) that sessile populations derived no phsiological advantage (manifested as differences in growth rates) over free-living cells. There was no difference in the rate or onset of iron deposition of attached compared to suspended cells. Blocking of protein synthesis by the addition of chloramphenicol suggested that, once iron deposition was initiated, continued protein synthesis was not required for full expression of this capability. The results suggested that iron deposition may be possibly mediated by certain of the constituents of the organism's sheath.     

The half-saturation coefficient for dissolved oxygen: A dynamic method for its determination and its effect on dual species competition

A simple approach was developed to determine the half-saturation coefficient for dissolved oxygen (K(DO)) for three bacteria by maintaining a constant oxygen concentration in continuous culture, and employing a dynamic method to obtain the specific growth rate (mu) for each species. Measurement of mu at selected dissolved oxygen concentrations (DO) resulted in a typical Monod curve for a plot of mu vs. DO. Values for K(DO) and mu(max) were obtained from the Lineweaver-Burk reciprocal plot. The bacteria studied included representative strains of three microorganisms isolated in pure culture from poorly settling activated sludge: two filamentous microorganisms, Sphaerotilus natans and a second Sphaerotilus sp., and an unidentified floc-forming microorganism. The K(DO) values obtained for Sphaerotilus sp., S. natans, and the floc former were 0.014, 0.033, and 0.073 mg/L, respectively. Dual species competition experiments were conducted in continuous culture under low and high DO conditions. Successful growth competition by these microorganisms under DO-limiting conditions was consistent with experimentally determined K(DO) values. The finding of lower K(DO) values for the two Sphaerotilus species, compared to the floc former, confirmed the hypothesis that these filamentous microorganisms can outgrow floc-forming microorganisms in activated sludge when DO in the aeration basin is low.     

Influence of nickel (II) and chromium (VI) on the laboratory scale rotating biological contactor

High concentration of heavy metals is toxic for most microorganisms and cause strict damage in wastewater treatment operations and often a physico-chemical pretreatment prior to biological treatment is considered necessary. However, in this study it has been shown that biological systems can adapt to Ni (II) and Cr (VI) when their concentration is below 10 and 20 mg/L, respectively. The aim of this study was to evaluate the effect of Ni (II) and Cr (VI) on the lab-scale rotating biological contactor process. It was found that, addition of Ni (II) up to 10 mg/L did not reduce the chemical oxygen demand removal efficiency and on the contrary concentrations below 10 mg/L improved the performance. The influent Ni (II) concentration of 1 mg/L was the concentration where the treatment efficiency produced a maximum COD removal of 86.5%. Moreover, Ni (II) concentration above 10 mg/L was relatively toxic to the system and produced lower treatment efficiencies than the baseline study without Ni (II). Turbidity and suspended solids removals were not stimulated to a great extent with nickel. Addition of Ni (II) did not seem to affect the pH of the system during treatment. The dissolved oxygen concentration did not drop below 4 mg/L at all concentrations of Ni (II) indicating aerobic conditions prevailed in the system. Experiments conducted with Cr (VI) revealed that addition of Cr (VI) up to 20 mg/L did not reduce the COD removal efficiency and on the contrary concentrations below 20 mg/L improved the performance. The influent Cr (VI) concentration of 1 mg/L was the concentration where the treatment efficiency produced a maximum COD removal of 88%. Turbidity and SS removals were more efficient at 5 mg/L Cr (VI) concentration, rather than 1 mg/L, which lead to the conclusion that 5 mg/L Cr (VI) concentration is the optimum concentration, in terms of COD, turbidity and SS removals. Similar with Ni (II) experiments, addition of Cr (VI) did not significantly affect the pH value of the effluent. The DO concentration remained above 5 mg/L.     

The methionyl aminopeptidase from Escherichia coli can function as an iron(II) enzyme.

The identity of the physiologically relevant metal ions for the methionyl aminopeptidase (MetAP) from Escherichia coli was investigated and is suggested to be Fe(II). The metal content of whole cells in the absence and presence of expression of the type I MetAP from E. coli was determined by inductively coupled plasma (ICP) emission analysis. The observed change in whole cell concentrations of cobalt, cadmium, copper, nickel, strontium, titanium, and vanadium upon expression of MetAP was negligible. On the other hand, significant increases in the cellular metal ion concentrations of chromium, zinc, manganese, and iron were observed with the increase in iron concentration being 4.4 and 6.2 times greater than that of manganese and zinc, respectively. Activity assays of freshly lysed BL21(DE3) cells containing the pMetAAP plasmid revealed detectable levels (>2 units/mg) of MetAP activity. Control experiments with BL21(DE3) without the MetAP plasmid showed no detectable enzymatic activity. Since MetAP is active upon expression, these data strongly suggest that cobalt is not the in vivo metal ion for the MetAP from E. coli. The MetAP from E. coli as purified was found to be catalytically inactive (相似文献   

Spectral properties of Co(II)- and Ni(II)-activated rabbit muscle pyruvate kinase.

Stoichiometry, kinetics, and optical properties of rabbit muscle pyruvate kinase activated with Co(II), Ni(II), Mg(II), and Mn(II) were studied. The stoichiometry of metal binding to enzyme was found to be 4 metal ions per tetrameric enzyme for Co(II) and Ni(II) by carrying out circular dichroic titrations. Cu(II) and Fe(II) were inactive. Ca(II) and Zn(II) were not activating, and were inhibitory with respect to all of the active cations. The temperature dependence of the optimal velocity is similar for all activating metals. The pH rate profiles suggest that there are two classes of enzyme activation by metal ions. Mg(II) and Mn(II) are quite similar to each other while Co(II) and Ni(II) are different from them but similar to each other. Absorption, natural, and magnetic CD in the visible region were used to probe the environment of the activating divalent cation in Ni(II)- and Co(II)-activated pyruvate kinase and their complexes with substrates and inhibitors...     

Aerobic bioreduction of nickel(II) to elemental nickel with concomitant biomineralization

Although microorganisms have the potential to reduce metals, products with elementary forms are unusual. In the present study, a strain of Pseudomonas sp. MBR was tested for its ability to reduce metal ions to their elementary forms coupled to biomineralization under aerobic conditions. The Pseudomonas sp. MBR strain was able to reduce metals such as Fe(III), Mn(II), Cu(II), Ni(II), Cd(II), Co(II), Al(III), Se(IV), and Te(IV) as electron acceptors to elementary forms using citrate, lactate, pyruvate, succinate, malate, glucose, or ethanol as electron donors. Growth and reduction during biomineralization occurred within the pH range of 6.0 to 11.0 and temperature range of 4 to 40 °C, with an optimum growth temperature of 28 °C. The resistance of Ni(II) varied from 0.5 to 5 mM. Ni(II) reduction was still observed when nitrate was present in addition to oxygen as a potential electron acceptor. The Ni(II) reduction efficiency was related with the molar ratio of the electron donor to Ni(II). Unlike other dissimilatory metal-reducing bacteria, which oxidizes organic matter with Fe(III) or Mn(IV) as the sole electron acceptor coupled to energy production under facultative anaerobic conditions, this strain used oxygen as an electron acceptor combined with metal reduction. The aerobic metal reduction may relate to a co-metabolic reduction. Transmission electron microscopy images demonstrated that the cells had the ability to accumulate heavy metals, and that the detoxicity mechanism was intracellular metal reduction. These results suggested that the use of Pseudomonas sp. MBR could be promising for toxic heavy metal bioremediation and biological metallurgy.     

Cobalt(II) Oxidation by the Marine Manganese(II)-Oxidizing Bacillus sp. Strain SG-1

The geochemical cycling of cobalt (Co) has often been considered to be controlled by the scavenging and oxidation of Co(II) on the surface of manganese [Mn(III,IV)] oxides or manganates. Because Mn(II) oxidation in the environment is often catalyzed by bacteria, we have investigated the ability of Mn(II)-oxidizing bacteria to bind and oxidize Co(II) in the absence of Mn(II) to determine whether some Mn(II)-oxidizing bacteria also oxidize Co(II) independently of Mn oxidation. We used the marine Bacillus sp. strain SG-1, which produces mature spores that oxidize Mn(II), apparently due to a protein in their spore coats (R.A. Rosson and K. H. Nealson, J. Bacteriol. 151:1027-1034, 1982; J. P. M. de Vrind et al., Appl. Environ. Microbiol. 52:1096-1100, 1986). A method to measure Co(II) oxidation using radioactive ⁵⁷Co as a tracer and treatments with nonradioactive (cold) Co(II) and ascorbate to discriminate bound Co from oxidized Co was developed. SG-1 spores were found to oxidize Co(II) over a wide range of pH, temperature, and Co(II) concentration. Leucoberbelin blue, a reagent that reacts with Mn(III,IV) oxides forming a blue color, was found to also react with Co(III) oxides and was used to verify the presence of oxidized Co in the absence of added Mn(II). Co(II) oxidation occurred optimally around pH 8 and between 55 and 65°C. SG-1 spores oxidized Co(II) at all Co(II) concentrations tested from the trace levels found in seawater to 100 mM. Co(II) oxidation was found to follow Michaelis-Menten kinetics. An Eadie-Hofstee plot of the data suggests that SG-1 spores have two oxidation systems, a high-affinity-low-rate system (K_m, 3.3 × 10^-8 M; V_max, 1.7 × 10^-15 M · spore^-1 · h^-1) and a low-affinity-high-rate system (K_m, 5.2 × 10^-6 M; V_max, 8.9 × 10^-15 M · spore^-1 · h^-1). SG-1 spores did not oxidize Co(II) in the absence of oxygen, also indicating that oxidation was not due to abiological Co(II) oxidation on the surface of preformed Mn(III,IV) oxides. These results suggest that some microorganisms may directly oxidize Co(II) and such biological activities may exert some control on the behavior of Co in nature. SG-1 spores may also have useful applications in metal removal, recovery, and immobilization processes.     

Metal biosorption in lignocellulosic biofuel biorefinery effluent: an initial step towards sustainability of water resources

Biosorption of metals by microorganisms is a promising technology to remove accumulated non-process elements in highly recycled biorefinery process water. Removal of these elements would enable greater water reuse and reduce the environmental impact of effluent discharge. A model lignocellulosic ethanol biorefinery wastewater was created based on pulp mill effluent. This generated a wastewater with an environmentally realistic high loading of dissolved natural organic matter (900?mg/l), a potentially important factor influencing metal biosorption. Analysis of feedstock and pulp mill effluent indicated that Mn and Zn are likely to be problematic in highly recycled lignocellulosic ethanol biorefinery process water. Therefore, the growth of several bacteria and fungi from existing collections, and some isolated from pulp mill effluent were tested in the model wastewater spiked with Mn and Zn (0.2?mM). Wastewater isolates grew the best in the wastewater. Metal uptake varied by species and was much greater for Zn than Mn. A bacterium, Novosphingobium nitrogenifigens Y88(T), removed the most metal per unit biomass, 35 and 17?mg?Mn/g. No other organism tested decreased the Mn concentration. A yeast, Candida tropicalis, produced the most biomass and removed the most total metal (38?% of Zn), while uptake per unit biomass was 24?mg?Zn/g. These results indicate that microorganisms can remove significant amounts of metals in wastewater with high concentrations of dissolved natural organic matter. Metal sorption by autochthonous microorganisms in an anaerobic bioreactor may be able to extend water reuse and therefore lower the water consumption of future biorefineries.     

Effects of deferoxamine methanesulfonate on Trichophyton mentagrophytes.

Deferoxamine methanesulfonate (Desferal), an iron chelator, inhibited germ tube formation and growth of Trichophyton mentagrophytes in a microculture assay. A 50% reduction of germ tube formation required Desferal at 5 mg/ml and a 50% reduction of growth required 1.5 mg/ml. Growth was almost completely inhibited with 50 and 100 mg/ml. Also, Desferal at 100 mg/ml inhibited further elongation when added to short hyphae (II and 21 micrometer), but showed less inhibitory effects when added to long hyphae (64 micrometer). Iron (133 microgram/ml) reversed the inhibition of growth produced by incubating spores with Desferal at 5 mg/ml, providing iron was added before 72 h incubation. Desferal at 100 mg/ml decreased viability of activated spores incubated for 3 days at 30 degrees C, but did not decrease viability of spores incubated for 3 days at 4 degrees C. The growth inhibitory effect of Desferal and transferrin were compared. Transferrin was inhibitory at low molarities (0.001 to 1.0 mM), while Desferal was inhibitory only at higher molarities (greater than 1 mM). Desferal (0.05 mM) also reversed the inhibition expected with 0.05 mM transferrin. These findings indicate that Desferal and transferrin deprive T. mentagrophytes of nutritional iron and thus inhibit growth of the fungus. Low concentrations of Desferal can also promote growth in the presence of transferrin.     

Applicability of Heavy-Metal Phytoextraction in United Arab Emirates: An Investigation of Candidate Species

Phytoremediation of contaminated calcareous desert land in the United Arab Emirates has been investigated. Soils from 12 northern UAE sites, suspected of metal contamination, were acid-extracted and analyzed by ICP-OES for Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn. Twenty-two plants naturally growing at contaminated sites were sampled and analyzed for their uptake of Co, Cr, Cu, Mn, Ni, Pb, and Zn and eight commercially available plants, grown under controlled conditions, were also studied for their phytoextraction capabilities. The concentration of available Cr was found to be 1300 ± 150 mg/kg in the soil of the Ajman Industrial Zone and 80 ± 10 mg/kg of Pb was found at Bithna. Among the plants investigated, Portulaca oleracea and Iresine herbstii showed potential for Cr(VI) and Pb(II) accumulation, respectively, with bioconcentration factors (BCF) greater than unity. Atriplex halimus accumulated Co(II), Cr(III), and Cu(II) each with a BCF > 1.     

Transformation and mineralization of 2,4,6-trinitrotoluene (TNT) by manganese peroxidase from the white-rot basidiomycete Phlebia radiata

The degradation of the nitroaromatic pollutant 2,4,6-trinitrotoluene (TNT) by the manganese-dependent peroxidase (MnP) of the white-rot fungus Phlebia radiata and the main reduction products formed were investigated. In the presence of small amounts of reduced glutathione (10 mM), a concentrated cell-free preparation of MnP from P. radiata exhibiting an activity of 36 nkat/ml (36 nmol Mn(II) oxidized per sec and per ml) transformed 10 mg/l of TNT within three days. The same preparation was capable of completely transforming the reduced derivatives of TNT. When present at 10 mg/l, the aminodinitrotoluenes were transformed in less than two days and the diaminonitrotoluenes in less than three hours. Experiments with ¹⁴C-U-ring labeled TNT and 2-amino-4,6-dinitrotoluene showed that these compounds were mineralized by 22% and 76%, respectively, within 5 days. Higher concentrations of reduced glutathione (50 mM) led to a severe inhibition of the degradation process. It is concluded that Phlebia radiata is a good candidate for the biodegradation of TNT as well as its reduction metabolites.     

Cleavage of DNA with methidiumpropyl-EDTA-iron(II): reaction conditions and product analyses

The synthesis of methidiumpropyl-EDTA (MPE) is described. The binding affinities of MPE, MPE.Ni(II), and MPE.Mg(II) to calf thymus DNA are 2.4 X 10(4) M-1, 1.5 X 10(5) M-1, and 1.2 X 10(5) M-1, respectively, in 50 mM NaCl, pH 7.4. The binding site size is two base pairs. MPE.Mg(II) unwinds PM2 DNA 11 +/- 3 degrees per bound molecule. MPE.Fe(II) in the presence of O2 efficiently cleaves DNA and with low sequence specificity. Reducing agents significantly enhance the efficiency of the cleavage reaction in the order sodium ascorbate greater than dithiothreitol greater than NADPH. At concentrations of 0.1-0.01 microM in MPE.Fe(II) and 10 microM in DNA base pairs, optimum ascorbate and dithiothreitol concentrations for DNA cleavage are 1-5 mM. Efficient cleavage of DNA (10 microM in base pairs) with MPE.Fe(II) (0.1-0.01 microM) occurs over a pH range of 7-10 with the optimum at 7.4 (Tris-HCl buffer). The optimum cleavage time is 3.5 h (22 degrees C). DNA cleavage is efficient in a Na+ ion concentration range of 5 mM to 1 M, with the optimum at 5 mM NaCl. The number of single-strand scissions on supercoiled DNA per MPE.Fe(II) under optimum conditions is 1.4. Metals such as Co(II), Mg(II), Ni(II), and Zn(II) inhibit strand scission by MPE. The released products from DNA cleavage by MPE.Fe(II) are the four nucleotide bases. The DNA termini at the cleavage site are 5'-phosphate and roughly equal proportions of 3'-phosphate and 3'-(phosphoglycolic acid). The products are consistent with the oxidative degradation of the deoxyribose ring of the DNA backbone, most likely by hydroxy radical.     

Essential trace elements in milk and blood serum of lactating donkeys as affected by lactation stage and dietary supplementation with trace elements

The aim of this trial was to study the concentration of zinc (Zn), iron (Fe), copper (Cu), manganese (Mn), selenium (Se), cobalt (Co) and iodine (I) in milk and blood serum of lactating donkeys, taking into account the effects of lactation stage and dietary supplementation with trace elements. During a 3-month period, 16 clinically healthy lactating donkeys (Martina-Franca-derived population), randomly divided into two homogeneous groups (control (CTL) and trace elements (TE)), were used to provide milk and blood samples at 2-week intervals. Donkeys in both groups had continuous access to meadow hay and were fed 2.5 kg of mixed feed daily, divided into two meals. The mixed feed for the TE group had the same ingredients as the CTL, but was supplemented with a commercial premix providing 163 mg Zn, 185 mg Fe, 36 mg Cu, 216 mg Mn, 0.67 mg Se, 2.78 mg Co and 3.20 mg I/kg mixed feed. The concentrations of Zn, Fe, Cu, Mn, Se, Co and I were measured in feeds, milk and blood serum by inductively coupled plasma-MS. Data were processed by ANOVA for repeated measures. The milk concentrations of all the investigated elements were not significantly affected by the dietary supplementation with TE. Serum concentrations of Zn, Fe, Cu Mn and Se were not affected by dietary treatment, but TE-supplemented donkeys showed significantly higher concentrations of serum Co (1.34 v. 0.69 μg/l) and I (24.42 v. 21.43 μg/l) than unsupplemented donkeys. The effect of lactation stage was significant for all the investigated elements in milk and blood serum, except for serum manganese. A clear negative trend during lactation was observed for milk Cu and Se concentrations (−38%), whereas that of Mn tended to increase. The serum Cu concentration was generally constant and that of Co tended to increase. If compared with data reported in the literature for human milk, donkey milk showed similarities for Zn, Mn, Co and I. Furthermore, this study indicated that, in the current experimental conditions, the mineral profile of donkey milk was not dependent on dietary TE supply.