Novel branched poly(ethylenimine)-cholesterol water-soluble lipopolymers for gene delivery

A novel water-soluble lipopolymer was synthesized by linking cholesteryl chloroformate to the secondary amino groups of branched poly(ethylenimine) (PEI) of 1,800 and 10,000 Da. Conjugation through PEI secondary amines gives this newly synthesized lipopolymer (abbreviated as PEI-Chol) special advantage over our previously synthesized lipopolymers, which utilized the primary amino groups for conjugation, as the primary amino groups have a significant role in DNA condensation. Also, significantly, only one cholesterol molecule was grafted onto each PEI molecule (confirmed by (1)H NMR and MALDI-TOF mass spectrometry), leaving enough space for the steric interactions of the PEI's primary amines with the DNA. The PEI-Chol lipopolymer was characterized for the critical micellar concentration (cmc), buffer capacity, DNA condensation (by band retardation and circular dichroism), in vitro transfection efficiency, and cell viability. The cmcs of PEI-Chol 1,800 and PEI-Chol 10,000 were 496.6 and 1,330.5 microg/mL, respectively. The acid-base titration indicated high buffering capacity of the polymers around the pH range of 5-7, which indicated their potential for buffering in the acidic pH environment of the endosomes. The band retardation studies indicated that efficient condensation of the plasmid DNA could be achieved using these lipopolymers. The circular dichroism spectra indicated a change in DNA conformation and adoption of lower energy state upon condensation with these lipopolymers when an N/P ratio of 2.5/1 or above was formulated. The mean particle size of these complexes was in the range 110-205 nm, except for the complexes prepared using PEI of 1,800 Da, which had a mean particle size of 384 +/- 300 nm. The zeta potential of DNA complexes prepared using PEI-Chol 1,800, PEI-Chol 10,000 and PEI of 1,800, 10,000, and 25,000 Da at an N/P ratio of 15/1 was in the range 23-30 mV and was dependent on the N/P ratios. The in vitro transfection of PEI-Chol/pCMS-EGFP complexes in Jurkat cells showed high levels of expressed Green Fluorescent Protein (GFP) with little toxicity as determined by flow cytometry. These novel water-soluble lipopolymers provided good transfection efficiency with other desirable characteristics such as water solubility, free primary amino groups for efficient DNA condensation and high buffer capacity that indicated the possibility of efficient endosomal release.     

Conjugation of a new two-photon fluorophore to poly(ethylenimine) for gene delivery imaging

We report herein the molecular engineering of an efficient two-photon absorbing (TPA) chromophore based on a donor-donor bis-stilbenyl entity to allow conjugation with biologically relevant molecules. The dye has been functionalized using an isothiocyanate moiety to conjugate it with the amine functions of poly(ethylenimine) (PEI), which is a cationic polymer commonly used for nonviral gene delivery. Upon conjugation, the basic architecture and photophysical properties of the active TPA chromophore remain unchanged. At the usual N/P ratio (ratio of the PEI positive charges to the DNA negative charges) of 10 used for transfection, the transfection efficiency and cytotoxicity of the labeled PEI/DNA complexes were found to be comparable to those of the unlabeled PEI/DNA complexes. Moreover, when used in combination with unlabeled PEI (at a ratio of 1 labeled PEI to 3 unlabeled PEI), the labeled PEI does not affect the size of the complexes with DNA. The labeled PEI was successfully used in two-photon fluorescence correlation spectroscopy measurements, showing that at N/P = 10 most PEI molecules are free and the diffusion coefficient of the complexes is consistent with the 360 nm size measured by quasielastic light scattering. Finally, two-photon images of the labeled PEI/DNA complexes confirmed that the complexes enter into the cytoplasm of HeLa cells by endocytosis and hardly escape from the endosomes. As a consequence, the functionalized TPA chromophore appears to be an adequate tool to label the numerous polyamines used in nonviral gene delivery and characterize their complexes with DNA in two-photon applications.     

Reducible poly(amido ethylenimine)s designed for triggered intracellular gene delivery

Poly(amido ethylenimine) polymers, a new type of peptidomimetic polymer, containing multiple disulfide bonds (SS-PAEIs) designed to degrade after delivery of plasmid DNA (pDNA) into the cell were synthesized and investigated as new carriers for triggered intracellular gene delivery. More specifically, three SS-PAEIs were synthesized from Michael addition reactions between cystamine bisacrylamide (CBA) and three different ethylene amine monomers, i.e., ethylenediamine (EDA), diethylenetriamine (DETA), or triethylenetetramine (TETA). Complete addition reactions were confirmed by (1)H NMR. The molecular weight, buffer capacity, and relative degree of branching for each SS-PAEI was determined by gel permeation chromatography (GPC), acid-base titration, and liquid chromatography-mass spectroscopy (LC-MS), respectively. Physicochemical characteristics of polymer/pDNA complexes (polyplexes) were analyzed by gel electrophoresis, particle size, and zeta-potential measurements. All three SS-PAEIs effectively complex pDNA to form nanoparticles with diameters less than 200 nm and positive surface charges of approximately 32 mV. The in vitro gene transfer properties of SS-PAEIs were evaluated using mouse embryonic fibroblast cell (NIH3T3), primary bovine aortic endothelial cell (BAEC), and rat aortic smooth muscle cell (A7R5) lines. Interestingly, polyplexes based on all three SS-PAEIs exhibited remarkably high levels of reporter gene expression with nearly 20x higher transfection efficiency than polyethylenimine 25k. The high transfection efficiency was maintained in the presence of 10% serum in the transfection medium. Furthermore, confocal microscopy experiments using labeled pDNA indicated that polyplexes of SS-PAEI displayed greater intracellular distribution of pDNA as compared to PEI, most likely due to environmentally triggered release. Therefore, SS-PAEIs are a new class of transfection agents that facilitate high gene expression while maintaining a low level of toxicity.     

Ruthenium(II) tris(bipyridine)-centered poly(ethylenimine) for gene delivery

Ruthenium(II) tris(bipyridine)-centered poly(ethylenimine) (Ru PEI) was synthesized via acid hydrolysis of Ru tris(bipyridine)-centered poly(2-ethyl-2-oxazoline) (Ru PEOX), and the luminescence, DNA entrapment, and transfection efficiencies were evaluated. Emission maxima for Ru PEI samples are red-shifted compared to Ru PEOX precursors, and the luminescence lifetimes are shorter in both methanol and aqueous solutions. Slower oxygen quenching of Ru PEOX and Ru PEI luminescence versus [Ru(bpy)3]Cl2 (bpy = bipyridine) is attributed to polymer shielding effects. Ru PEI luminescence is similar in the presence and absence of DNA. Ru PEI (7900 Da) and linear PEI (L-PEI; 22,000 Da) fully entrapped DNA (5.4 kb; pcDNA) at an N/P ratio of 2. LNCaP prostate cancer cells were transfected with a plasmid encoding for green fluorescent protein using Ru PEI and L-PEI vectors for comparison. For N/P = 48, the transfection efficiency for Ru PEI was approximately 50% relative to that of L-PEI.     

Engineering a polymeric gene delivery vector based on poly(ethylenimine) and hyaluronic acid

In this work, the effects of primary amines, ligand targeting, and overall charge on the effectiveness of branched poly(ethylenimine)-hyaluronic acid conjugate (bPEI-HA) zwitterionic gene delivery vectors are investigated. To elucidate the relative importance of each of these parameters, we explored the zeta potential, cytotoxicity, and transfection efficiency for a variety of formulations of bPEI-HA. It was found that the length of the hyaluronic acid (HA) oligosaccharide had the most significant effect on cytotoxicity and transfection efficiency with human mesenchymal stem cells. Test groups of bPEI incorporating HA with a length of 10 saccharides had significantly higher transfection efficiency (14.6 ± 2.0%) and lower cytotoxicity than other formulations tested, with the cytotoxicity of the group containing the greatest mass of 10 saccharide showing similar results as the positive controls at the highest polymer concentration (100 μg/mL). Additionally, molar incorporation of HA, as opposed to the saccharide length and HA mass incorporation, had the greatest effect on zeta potential but a minor effect on both cytotoxicity and transfection efficiency. This work demonstrates the relative importance of each of these tunable design criteria when creating a zwitterionic polymeric gene delivery vector and provides useful specific information regarding the design of bPEI-HA gene delivery vectors.     

Amphiphilic core-shell nanoparticles with poly(ethylenimine) shells as potential gene delivery carriers

Spherical, well-defined core-shell nanoparticles that consist of poly(methyl methacrylate) (PMMA) cores and branched poly(ethylenimine) shells (PEI) were synthesized via a graft copolymerization of methyl methacrylate from branched PEI induced by a small amount of tert-butyl hydroperoxide. The PMMA-PEI core-shell nanoparticles were between 130 to170 nm in diameter and displayed zeta-potentials near +40 mV at pH 7 in 1 mM aqueous NaCl. Plasmid DNA (pDNA) was mixed with nanoparticles and formed complexes of approximately 120 nm in diameter and was highly monodispersed. The complexes were characterized with respect to their particle size, zeta-potential, surface morphology, and DNA integrity. The complexing ability of the nanoparticles was strongly dependent on the molecular weight of the PEI and the thickness of the PEI shells. The stability of the complexes was influenced by the loading ratio of the pDNA and the nanoparticles. The condensed pDNA in the complexes was significantly protected from enzymatic degradation by DNase I. Cytotoxity studies using MTT colorimetric assays suggested that the PMMA-PEI (25 kDa) core-shell nanoparticles were three times less toxic than the branched PEI (25 kDa). Their transfection efficiencies were also significantly higher. Thus, the PEI-based core-shell nanoparticles show considerable potential as carriers for gene delivery.     

Novel biodegradable poly(disulfide amine)s for gene delivery with high efficiency and low cytotoxicity

Novel biodegradable poly(disulfide amine)s with defined structure, high transfection efficiency, and low cytotoxicity were designed and synthesized as nonviral gene delivery carriers. Michael addition between N, N'-cystaminebisacrylamide (CBA) and three N-Boc protected diamines ( N-Boc-1,2-diaminoethane, N-Boc-1,4-diaminobutane, and N-Boc-1,6-diaminohexane) followed by N-Boc deprotection under acidic condition resulted in final cationic polymers with disulfide bonds, tertiary amine groups in main chains, and pendant primary amine groups in side chains. Polymer structures were confirmed by 1H NMR, and their molecular weights were in the range 3.3-4.7 kDa with narrow polydispersity (1.12-1.17) as determined by size exclusion chromatography (SEC). Acid-base titration assay showed that the poly(disulfide amine)s possessed superior buffering capacity to branched PEI 25 kDa in the pH range 7.4-5.1, which may facilitate the escape of DNA from the endosomal compartment. Gel retardation assay demonstrated that significant polyplex dissociation was observed in the presence of 5.0 mM DTT within 1 h, suggesting rapid DNA release in the reduction condition such as cytoplasm due to the cleavage of disulfide bonds. Genetic transfections mediated by these poly(disulfide amine)s were side-chain spacer length dependent. The poly(disulfide amine) with a hexaethylene spacer, poly(CBA-DAH), had comparable transfection efficiency to bPEI 25 kDa in the tested cell lines, i.e., 293T cells, Hela cells, and NIH3T3 cells. This same poly(disulfide amine) mediated 7-fold higher luciferase expression than bPEI 25 kDa in C2C12 cells (mouse myoblast cell line), a cell line difficult to transfect with many cationic polymers. Furthermore, MTT assay indicated that all three poly(disulfide amine)s/pDNA polyplexes were significantly less toxic than bPEI/pDNA complexes.     

Neuron-specific delivery of nucleic acids mediated by Tet1-modified poly(ethylenimine)

BACKGROUND: The development of minimally invasive, non-viral gene delivery vehicles for the central nervous system (CNS) is an important technology goal in the advancement of molecular therapies for neurological diseases. One approach is to deliver materials peripherally that are recognized and retrogradely transported by motor neurons toward the CNS. Tet1 is a peptide identified by Boulis and coworkers to possess the binding characteristics of tetanus toxin, which interacts specifically with motor neurons and undergoes fast, retrograde delivery to cell soma. In this work, Tet1-poly(ethylenimine) (Tet1-PEI) was synthesized and evaluated as a neurontargeted delivery vehicle. METHODS: Tet1-PEI and NT-PEI (neurotensin-PEI) were synthesized and complexed with plasmid DNA to form polyplexes. Polyplexes were assessed for binding and uptake in differentiated neuron-like PC-12 cells by flow cytometry and confocal microscopy. In order to determine gene delivery efficiency, polyplexes were exposed to PC-12 cells at various stages of differentiation. Targeted binding of polyplexes with primary neurons was studied using dorsal root ganglion cells. RESULTS: Tet1-PEI and NT-PEI polyplexes bound specifically to differentiated PC-12 cells. The specificity of the interaction was confirmed by delivery to non-neuronal cells and by competition studies with free ligands. Tet1-PEI polyplexes preferentially transfected PC-12 cells undergoing NGF-induced differentiation. Finally, neuron-specific binding of Tet1-PEI polyplexes was confirmed in primary neurons. CONCLUSIONS: These studies demonstrate the potential of Tet1-PEI as a neuron-targeted material for non-invasive CNS delivery. Tet1-PEI binds specifically and is internalized by neuron-like PC-12 cells and primary dorsal root ganglion. Future work will include evaluation of siRNA delivery with these vectors.     

Thermogelling poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) disulfide multiblock copolymer as a thiol-sensitive degradable polymer

We report a reverse thermogelling poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) disulfide multiblock copolymer as a thiol-sensitive biodegradable polymer. The poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) aqueous solutions studied in this research underwent sol-gel-sol or sol-gel-sol-gel transition depending on the molecular weight and concentration of the polymer, whereas the corresponding disulfide multiblock copolymer aqueous solutions underwent sol-gel transition as the temperature increased in a range of 0-60 degrees C. The hydrophobic dye solubilization and dynamic light scattering of the polymer aqueous solution suggest that the poly(ethylene oxide-b-propylene oxide-b-ethylene oxide)s undergo unimer (3 nm) to micelle (12 nm) transition, whereas the disulfide multiblock copolymers undergo unimer (6 nm) to aggregated polymer (600 nm) transition as the temperature increases. The gel duration increased from 6 h (poly(ethylene oxide-b-propylene oxide-b-ethylene oxide)) to more than 12 days (the corresponding disulfide multiblock copolymer) in phosphate buffer saline, and the gel duration of the latter depended on the glutathione concentration of the medium. The model drug, paclitaxel, was released from the in-situ-formed poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) disulfide multiblock copolymer gel in a glutathione concentration-sensitive manner.     

Direct plant gene delivery with a poly(amidoamine) dendrimer

Plant gene delivery is challenging due to the presence of plant cell walls. Conventional means such as Agrobacterium infection, biolistic particle bombardment, electroporation, or polyethylene glycol attachment are often characterized by high cost, labor extensiveness, and a significant perturbation to the growth of cells. We have succeeded in delivering GFP-encoding plasmid DNA to turfgrass cells using poly(amidoamine) dendrimers. Our new scheme utilizes the physiochemical properties as well as the nanosize of the poly(amidoamine) dendrimer for direct and noninvasive gene delivery. The GFP gene was expressed in the plant cells as observed by confocal fluorescence microscopy. The transfection efficiency may be further improved by optimizing the pH of the cell culture medium and the molar ratio of the dendrimer to DNA. The use of the current delivery system can be extended to virtually all plant species having successful regeneration systems in place.     

Synthesis of biodegradable cross-linked poly(beta-amino ester) for gene delivery and its modification, inducing enhanced transfection efficiency and stepwise degradation

Biodegradable cross-linked poly(beta-amino ester) (CLPAE) was synthesized by Michael addition of pentaerythritol triacrylate and N,N-dimethylethylenediamine and modified with aminohexanoic acid and lysine to CLPAE-Ahx and CLPAE-Lys, respectively, for a gene delivery system. They could self-assemble with plasmid DNA, forming nanosized polyplexes, and CLPAE-Ahx polyplex released plasmid DNA slowly during a week through stepwise degradation. The polymers showed minimal cytotoxicity on 293 cells due to their biodegradability and biocompatibility. Transfection efficiencies of CLPAE-Ahx and CLPAE-Lys were comparable to that of PEI in 293 cells and C2C12 cells. Additionally, high transfection of CLPAE-Ahx on primary rat aorta vascular smooth muscle cells (SMC) and primary mouse embryonic fibroblast cells (MEF) shows a potential for a gene delivery system on primary cells, restenosis treatment of human SMC, and MEF cell function research. In conclusion, CLPAE-Ahx could be used as a nontoxic and highly efficient gene delivery system.     

Poly(3-guanidinopropyl methacrylate): a novel cationic polymer for gene delivery

A cationic polymethacrylate with a guanidinium side group was designed in order to create a polymer with cell membrane-penetrating properties such as Tat or other arginine-rich peptides. The polymer, poly(3-guanidinopropyl methacrylate), abbreviated as pGuaMA, was synthesized by free radical polymerization. The DNA-condensing properties of pGuaMA (Mw 180 kDa) were investigated via dynamic light scattering and zeta potential measurements, and small, positively charged particles (110 nm, +37 mV) were found. It was shown that polyplexes based on pGuaMA were able to transfect COS-7 cells efficiently in the absence of serum, while under the same conditions poly(arginine) (pArg) polyplexes did not show detectable transfection levels. Addition of a membrane-disrupting peptide, INF 7, derived from the influenza virus, to preformed pGuaMA polyplexes did result in approximately 2 times increased transfection levels. DLS, zeta potential measurements, gel electrophoresis, and ethidium bromide displacement measurements indicated that serum induced aggregation of the polyplexes at high polymer/plasmid ratios, while at low polymer/plasmid ratios the polarity of the polyplexes reversed likely due to adsorption of negatively charged proteins on their surface. Likely, the unfavorable interactions of pGuaMA polyplexes with serum proteins is the reason for the absent transfection activity of these polyplexes in the presence of serum. Confocal laser scanning microscopy indicated cellular internalization via endocytosis of both polyplexes and free polymer. Thus, pGuaMA polyplexes enter cells, as reported for other polyplexes, by endocytosis and not, as hypothesized, via direct membrane passage.     

A tetra(L-lysine)-grafted poly(organophosphazene) for gene delivery

In order to develop a new gene delivery vector, a novel cationic poly(organophosphazene) was synthesized by stepwise nucleophilic substitutions of poly(dichlorophosphazene) with a hydrophilic methoxy-poly(ethylene glycol) (MPEG) as a shielding group and a branched tetra(L-lysine), LysLys(LysEt)(2), as a cationic moiety. The cationic polymer has shown to form a polyplex by DNA condensation and very low in vitro cytotoxicity probably due to the shielding effect of MPEG, which provides a basis for improving the low gene transfection yield of cationic polyphosphazenes.     

Inhibition of intracellular protein degradation by pepstatinyl, poly(L-lysine), and pepstatinyl-poly(L-lysine)

Coupling the cathepsin D inhibitor pepstatin to poly(l-Lys) (M_r 13,000) is shown to enhance its inhibition of protein breakdown in whole cell systems. Rates of intracellular protein breakdown for prelabeled proteins of Balb/c 3T3 fibroblasts were measured in the presence and absence of amino acids and insulin to generate basal and enhanced rates of protein breakdown. Pepstatin and poly(l-Lys) inhibited rates of degradation 5–7% and 16–23%, respectively, under each condition. Pepstatinyl-poly(l-Lys), containing 9 mol pepstatin/mol polymer, inhibited enhanced rates of degradation a further 24–33% compared to poly(l-Lys), but this extra increment was not seen under basal conditions. Although the mechanism of inhibition of intracellular protein breakdown by poly(l-Lys) presently is unknown, the data obtained with free and conjugated pepstatin indicate the lysosomal system degrades proteins under both basal and enhanced conditions.     

Identification of a coenzyme A--glutathione disulfide (DSI), a modified coenzyme A disulfide (DSII), and a NADPH-dependent coenzyme A--glutathione disulfide reductase in E. coli.

The nucleotides DSI and DSII induced during a slowdown in growth of E. coli have been characterized using chemical and biochemical analysis and by enzymic and alkaline fragmentation. DSI consists a coenzyme A and glutathione joined by a disulfide linkage. DSI could be isolated either containing Fe(III) with an A250:260 ratio of 1.05 or not containing iron with an A250:260 of 0.87. DSII (isolated in 10% the yield of DSI) is a coenzyme A disulfide dimer that also contains two molecules of glutamic acid. DSI was a substrate for NADPH-dependent CoAS-SG reductase (EC 1.6.4.6) which was present in crude extracts of E. coli. The specific activity of CoAS-SG reductase increased during growth from early log phase into stationary phase and during a shift from aerobic to anaerobic growth.     

Development of novel poly(ethylene glycol)-based vehicles for gene delivery

The purpose of this research was to develop and characterize a gene delivery vehicle with a poly(ethylene glycol) (PEG) backbone with the aim of overcoming limitations, such as cytotoxicity and rapid clearance, associated with current commonly used non-viral carriers. PEG was functionalized with DNA-binding peptides (DBPs) to make a vehicle (DBP-PEG) capable of condensing DNA. Complexes of plasmid DNA and DBP-PEG were formed and characterized by measuring particle size, zeta potential, and transfection efficiency as a function of N:P charge ratios (DBP-PEG amino groups:DNA phosphate). Dynamic light scattering showed that DBP-PEG was able to condense DNA efficiently resulting in a population of particles in the range of 250-300 nm. Neutral or slightly positive zeta potentials were measured for charge ratios of 3.5:1 and greater. DBP-PEG/DNA complexes, made with plasmids encoding the green fluorescent protein (GFP) and beta-Galactosidase (beta-Gal) genes, were used to transfect Chinese hamster ovary (CHO) cells. DBP-PEG/DNA was capable of transfecting cells and maximum transfection efficiency was observed for N:P ratios from 4:1 to 5:1, corresponding to zeta potentials from -4 to +1.6 mV. The effect of the DBP-PEG vehicle on cell viability was assayed. DBP-PEG was associated with a higher percentage of viable cells ( approximately 95%) than either polyethylenimine (PEI) or poly-L-lysine (PLL), and with transfection efficiency greater than PLL, but with somewhat lower than PEI. The results of this work demonstrate that PEG can be used as the backbone for gene delivery vehicles.     

Structural advantage of dendritic poly(L-lysine) for gene delivery into cells

This study aimed to investigate the relationships between structures of gene carrier molecules and their activities for gene delivery into cells. We compared 2 types of poly(L-lysine) as carriers, that is, dendritic poly(L-lysine) (KG6) and linear poly(L-lysine) (PLL). KG6 formed a neutral DNA complex, and its DNA compaction level was weaker than that of PLL. The amount of DNA binding and uptake into cells mediated by PLL was 4-fold higher than that with KG6. However, KG6-mediated gene expression was 100-fold higher than that by PLL. Since pK(a) values of terminal amines of KG6 were lowered even though small amounts of DNA were internalized into cells, sufficient DNA amounts for effective gene expression escaped to the cytosol due to the proton sponge effect in the endosome. In addition, weakly compacted DNA with KG6 was advantageous in accessing RNA polymerase in the cell nucleus. On the other hand, PLL did not show the proton sponge effect in the endosome and resulted in strong compaction of DNA. Even though large DNA amounts were internalized into cells, most of the DNA would not take part in gene expression systems in the nucleus. Amount of induced cytokine production after intravenous injection of DNA complexes with KG6 and PLL was low, and was similar to the case when DNA was injected alone. Therefore, no significant difference in effects on cytokine production was observed between KG6 and PLL.     

Targeted cationic poly(D,L-lactic-co-glycolic acid) nanoparticles for gene delivery to cultured cells

We developed a new targeted cationic nanoparticulate system composed of poly(D,L-lactic-co-glycolic acid) (PLGA), 1,2-dioleoyl-3-(trimethylammonium) propane (DOTAP) and asialofetuin (AF), and found it to be a highly effective formulation for gene delivery to liver tumor cells. The nanoparticles (NP) were prepared by a modified solvent evaporation process that used two protocols in order to encapsulate (NP1 particles) or adsorb (NP2 particles) plasmid DNA. The final particles are in the nanoscale range. pDNA loaded in PLGA/DOTAP/AF particles with high loading efficiency showed a positive surface charge. Targeted asialofetuin-nanoparticles (AF-NP) carrying genes encoding for luciferase and interleukin-12 (IL-12) resulted in increased transfection efficiencies compared to free DNA and to plain (non-targeted) systems, even in the presence of 60% fetal bovine serum (FBS). The results of transfections performed on HeLa cells, defective in asialoglycoprotein receptors (ASGPr-), confirmed the receptor-mediated endocytosis mechanism. In summary, this is the first time that asialoglycoprotein receptor targeting by PLGA/DOTAP/DNA nanoparticles carrying the therapeutic gene IL-12 has been shown to be efficient in gene delivery to liver cancer cells in the presence of a very high concentration of serum, and this could be a potential system for in vivo application.     

Self-catalyzed degradation of linear cationic poly(2-dimethylaminoethyl acrylate) in water

We report the synthesis of a low cytotoxic polycation that maintains its cationic strength for well over a few hours then degrades into a benign polymer with nontoxic byproducts. Well-defined poly(2-dimethylaminoethyl acrylate) (PDMAEA) of five different molecular weights prepared using reversible addition-fragmentation chain transfer (RAFT) "living" radical polymerization degrades slowly over 200 h (～8 days). As this degradation is independent of both the polymer molecular weight and solution pH, it is consistent with a self-catalyzed hydrolysis process without the need for an internal or external degradation trigger. In addition, the polymer shows little or no cytotoxicity to HeLa cells for the molecular weights of 5600 and below, even at very high polymer concentrations (equivalent to a nitrogen/phosphorus ratio of 200). Therefore, at sufficiently low molecular weights this polymer has the essential attributes (i.e., ability to autodegradable and low toxicity) for a delivery carrier suitable for DNA or siRNA.