IntI2 integron integrase in Tn7

Integrons can insert and excise antibiotic resistance genes on plasmids in bacteria by site-specific recombination. Class 1 integrons code for an integrase, IntI1 (337 amino acids in length), and are generally borne on elements derived from Tn5090, such as that found in the central part of Tn21. A second class of integron is found on transposon Tn7 and its relatives. We have completed the sequence of the Tn7 integrase gene, intI2, which contains an internal stop codon. This codon was found to be conserved among intI2 genes on three other Tn7-like transposons harboring different cassettes. The predicted peptide sequence (IntI2*) is 325 amino acids long and is 46% identical to IntI1. In order to detect recombination activity, the internal stop codon at position 179 in the parental allele was changed to a triplet coding for glutamic acid. The sequences flanking the cassette arrays in the class 1 and 2 integrons are not closely related, but a common pool of mobile cassettes is used by the different integron classes; two of the three antibiotic resistance cassettes on Tn7 and its close relatives are also found in various class 1 integrons. We also observed a fourth excisable cassette downstream of those described previously in Tn7. The fourth cassette encodes a 165-amino-acid protein of unknown function with 6.5 contiguous repeats of a sequence coding for 7 amino acids. IntI2*179E promoted site-specific excision of each of the cassettes in Tn7 at different frequencies. The integrases from Tn21 and Tn7 showed limited cross-specificity in that IntI1 could excise all cassettes from both Tn21 and Tn7. However, we did not observe a corresponding excision of the aadA1 cassette from Tn21 by IntI2*179E.     

The region of the IncN plasmid R46 coding for resistance to beta-lactam antibiotics, streptomycin/spectinomycin and sulphonamides is closely related to antibiotic resistance segments found in IncW plasmids and in Tn21-like transposons.

The nucleotide sequence of a 2.5 kb segment of the pKM101 (R46) genome has been determined. The 1.3 kb from a BamHI site at 153 to base 1440 differs by only 2 bases from a part of the published sequence of the aadB (gentamicin resistance) gene region including the coding region for the N-terminal 70 amino acids of the predicted aadB product. The same sequence has been found 5'-to the dhfrII gene of R388 and to the aadA gene of Tn21 (R538-1). Three open reading frames are located in this region, two on the same strand as the resistance genes and one on the complementary strand. The latter predicts a polypeptide of 337 amino acids, whose N-terminal segment is 40% homologous to the predicted product of an open reading frame of 179 amino acids located next to the dhfrI gene of Tn7. The oxa2 (oxacillin resistance) gene predicts a long polypeptide commencing with (the N-terminal) 70 amino acids of the aadB product. A similar arrangement is found in the aadA gene of R538-1. The N-terminal segment of an aadA gene is located 3'- to oxa2, separated by 36 bases. Sequences surrounding the BamHI site are identical to sequences 5'- to the tnpM gene of Tn21 and homology ceases where homology between Tn21 and Tn501 commences. The possibility that this antibiotic resistance segment is a discrete mobile DNA element is discussed.     

Toluene transposons Tn4651 and Tn4653 are class II transposons

The toluene degradative transposon Tn4651 is included within another transposon, Tn4653, and both of these elements are members of the Tn3 family. The tnpA gene product of each element mediates formation of cointegrates as intermediate products of transposition, and the tnpS and tnpT gene products encoded by Tn4651 take part in resolution of both Tn4651- and Tn4653-mediated cointegrates. Sequence analysis demonstrated that Tn4651 and Tn4653 have 46- and 38-base-pair terminal inverted repeats, respectively, and that both elements generate 5-base-pair duplication of the target sequence upon transposition. Complementation tests of the Tn4651- and Tn4653-encoded transposition functions with those of Tn3, Tn21, and Tn1721 showed that (i) the trans-acting transposition functions encoded by Tn4651 were not interchangeable with those encoded by the four other transposons, (ii) the Tn4653 tnpA function was interchangeable with the Tn1721 function, and (iii) Tn4653 coded for a resolvase (tnpR gene product) that complemented the tnpR mutations of Tn21 and Tn1721. The Tn4653 tnpR gene was located just 5' upstream of the tnpA gene and shared extensive sequence homology with the Tn1721 tnpR gene. The res region was located adjacent to the tnpR gene, and sequence analysis indicated that failure of the Tn4653 tnpR product to resolve the Tn4653-mediated cointegrates is ascribed to an incomplete structure of the res region.     

Nucleotide sequence of the AAD(2'''') aminoglycoside adenylyltransferase determinant aadB. Evolutionary relationship of this region with those surrounding aadA in R538-1 and dhfrII in R388.

The nucleotide sequence of the aadB gene which confers resistance to kanamycin, gentamicin, and tobramycin has been determined. The size of the longest reading frame is 747 bases encoding a protein of predicted size 27,992 daltons. A segment of the aadB gene sequence (including the promoter region) was found upstream of the aadA gene in R538-1 and of the dhfrII gene in R388 and the proposed promoters for these genes coincide with the aadB promoter region. The sequence homology extends upstream to the end of the sequenced regions of R388 and R538-1. Almost perfect homology was also found between the sequences 3'- to the aadB gene and 3'- to the aadA genes of R538-1 and pSa. This segment includes a 59 base element previously found flanking the Tn7 aadA gene. A model is presented for the evolution of this region of the plasmid genomes in which the 59- base element functions as an insertional "hot spot" and the possibility that this region is analogous to the aadA/aadB region of the Tn21- like transposon family is considered.     

Structure and function of Tn5467, a Tn21-like transposon located on the Thiobacillus ferrooxidans broad-host-range plasmid pTF-FC2.

A 3.5-kb region of plasmid pTF-FC2, which contains a transposon-like element designated Tn5467, has been sequenced, and its biological activity has been investigated. The transposon is bordered by two 38-bp inverted repeat sequences which have sequence identity in 37 of 38 and in 38 of 39 bp to the tnpA distal and tnpA proximal inverted repeats of Tn21, respectively. Within these borders, open reading frames with amino acid similarity to a glutaredoxin-like protein, a MerR regulatory protein, and a multidrug-resistant-membrane transport-like protein were found. The gene for the glutaredoxin-like protein was expressed in Escherichia coli and enabled growth of a glutathione-requiring E. coli trxA gshA mutant on minimal medium and the reduction of methionine sulfoxide to methionine. In addition, there were two regions which, when translated, had homology to 85% of the N-terminal region of the Tn21 resolvase (tnpR) and to 15% of the C terminus of the Tn21 transposase (tnpA). A region containing res-like sites was located immediately upstream of the partial tnpR gene. Neither the partial transposase nor the resolvase genes of Tn5467 were biologically active, but Tn5467 was transposed and resolved when the Tn21 transposase and resolvase were provided in trans. Tn5467 appears to be a defective transposon which belongs to the Tn21 subgroup of the Tn3 family.     

Definition of three resolvase binding sites at the res loci of Tn21 and Tn1721.

The dual functions of resolvase, site-specific recombination and the regulation of its own expression from tnpR, both require the interaction of this protein with the DNA sequence at res, but the specificity of this interaction differs between groups of Tn3-like elements. In this study, DNA fragments that contained res from Tn21 or Tn1721 were subjected to either cleavage by DNase I or methylation by dimethyl sulphate in the presence of the purified resolvase from Tn21 or Tn1721. These experiments showed that each resolvase bound to the same three sites (I, II and III) within res from Tn1721 and to an equivalent series of three sites on Tn21: the differences in the amino acid sequences of the two proteins did not affect their interaction with either DNA. The DNA sequences at each site had some similarities and, in conjunction with data from the related transposon Tn501, a consensus was established. However, the three sites are functionally distinct: site I (tnpR-distal) spans the recombination cross-over point and sites II and III (tnpR-proximal) overlap the promoter of tnpR. The binding sites on these transposons were compared with those in the gamma delta/Tn3 system: the similarities between the two groups of transposons revealed some general features of resolvase-DNA interactions while the differences in fine structure elucidated the specificity of each resolvase.     

Specific DNA cleavage mediated by the integrase of conjugative transposon Tn916.

The conjugative transposon Tn916 encodes a protein called INT(Tn916) which, based on DNA sequence comparisons, is a member of the integrase family of site-specific recombinases. Integrase proteins such as INT(lambda), FLP, and XERC/D that promote site-specific recombination use characteristic, conserved amino acid residues to catalyze the cleavage and ligation of DNA substrates during recombination. The reaction proceeds by a two-step transesterification reaction requiring the formation of a covalent protein-DNA intermediate. Different requirements for homology between recombining DNA sites during integrase-mediated site-specific recombination and Tn916 transposition suggest that INT(Tn916) may use a reaction mechanism different from that used by other integrase recombinases. We show that purified INT(Tn916) mediates specific cleavage of duplex DNA substrates containing the Tn916 transposon ends and adjacent bacterial sequences. Staggered cleavages occur at both ends of the transposon, resulting in 5' hydroxyl protruding ends containing coupling sequences. These are sequences that are transferred with the transposon from donor to recipient during conjugative transposition. The nature of the cleavage products suggests that a covalent protein-DNA linkage occurs via a residue of INT(Tn916) and the 3'-phosphate group of the DNA. INT(Tn916) alone is capable of executing the strand cleavage step required for recombination during Tn916 transposition, and this reaction probably occurs by a mechanism similar to that of other integrase family site-specific recombinases.     

Intramolecular transposition by Tn10

Transposon Tn10 promotes the formation of a circular product containing only transposon sequences. We show that these circles result from an intramolecular transposition reaction in which all of the strand cleavage and ligation events have occurred but newly created transposon/target junctions have not undergone repair. The unligated strand termini at these junctions are those expected according to a simple model in which the target DNA is cleaved by a pair of staggered nicks 9 bp apart, transposon sequences are separated from flanking donor DNA by cleavage at the terminal nucleotides on both strands (at both ends) of the element, and 3' transposon strand ends are ligated to 5' target strand ends. The stability of the unligated junctions suggests that they are protected from cellular processing by transposase and/or host proteins. We propose that the nonreplicative nature of Tn10 transposition is determined by the efficiency with which the nontransferred transposon strand is separated from flanking donor DNA and by the nature of the protein-DNA complexes present at the strand transfer junctions.     

An alternative inverse PCR (IPCR) method to amplify DNA sequences flanking Tn5 transposon insertions

We have developed an alternative method to amplify DNA sequences flanking Tn5 transposon insertions. This method relies on the identical sequences of inverted terminal repeats, located at the 5' and 3' ends of Tn5, to determine the location and orientation of a transposon insertion within a restriction endonuclease fragment. From this information, PCR primers can be designed to selectively amplify by inverse PCR the DNA flanking one side of the transposon. This method avoids the problem of amplifying or cloning long sequences flanking Tn5. To demonstrate the applicability of this method, we generated Tn5 transposon mutants of Pseudomonas abietaniphila BKME-9 which no longer grew on dehydroabietic acid (DhA). The flanking sequence of one of the mutant (strain BKME-941) which accumulated 7-oxoDhA, was amplified.     

Amikacin resistance mediated by multiresistance transposon Tn2424

Tn2424, a multiresistance transposon 25 kilobases long, was isolated from IncFII plasmid NR79. Tn2424 transposed resistance to sulfonamides, streptomycin and spectinomycin, mercuric chloride, chloramphenicol, and amikacin with a frequency of 6 X 10(-5). Resistance to amikacin was mediated by a 6'-N-acetyltransferase, which conferred higher levels of resistance in Pseudomonas aeruginosa than in Escherichia coli. A restriction analysis and cloning experiments resulted in a physical and functional map of Tn2424. Comparison by a heteroduplex technique revealed that Tn2424 includes the total sequence of Tn21 and two additional DNA fragments that are 1.8 and 4 kilobases long.     

The aacA-aphD gentamicin and kanamycin resistance determinant of Tn4001 from Staphylococcus aureus: expression and nucleotide sequence analysis

The aacA-aphD aminoglycoside resistance determinant of the Staphylococcus aureus transposon Tn4001, which specifies resistance to gentamicin, tobramycin and kanamycin, has been cloned and shown to express these resistances in Escherichia coli. The determinant encoded a single protein with an apparent size of 59 kDa which specified both aminoglycoside acetyltransferase [AAC(6')] and aminoglycoside phosphotransferase [APH(2")] activities. Nucleotide sequence analysis of the determinant showed it to be capable of encoding a 479-amino-acid protein of 56.9 kDa. analysis of Tn1725 insertion mutants of the determinant indicated that resistance to tobramycin and kanamycin is due to the AAC activity specified by, approximately, the first 170 amino acids of the predicted protein sequence and is consistent with the gentamicin resistance, specified by the APH activity, being encoded within the C-terminal region of the protein. Comparison of the C-terminal end of the predicted amino acid sequence with the reported sequences of 13 APHs and a viomycin phosphotransferase revealed a region which is highly conserved among these phosphotransferases.     

Nucleotide sequence analysis of IS256 from the Staphylococcus aureus gentamicin-tobramycin-kanamycin-resistance transposon Tn4001

Resistance to the aminoglycosides gentamicin, tobramycin and kanamycin (GmTmKmR) in Australian clinical strains of Staphylococcus aureus is commonly carried on the composite transposon Tn4001. The resistance gene aacA-aphD of Tn4001, which encodes a bifunctional AAC(6')-APH(2") modifying enzyme, is flanked by two 1324-bp inverted repeats, IS256L and IS256R, that are identical in sequence. Analysis of the IS256 sequence revealed structural features characteristic of IS elements including 26-bp imperfect terminal inverted repeats and a single open reading frame with coding capacity for a 45.6 kDa protein. The nucleotide sequence of IS256 described here, together with the sequence of the aacA-aphD gene reported previously [Rouch et al., J. Gen. Microbiol. 133 (1987) 3039-3052], completes the entire sequence of Tn4001, which totals 4566 bp.     

The nucleotide sequence of the tnpA gene completes the sequence of the Pseudomonas transposon Tn501.

The nucleotide sequence of the gene (tnpA) which codes for the transposase of transposon Tn501 has been determined. It contains an open reading frame for a polypeptide of Mr = 111,500, which terminates within the inverted repeat sequence of the transposon. The reading frame would be transcribed in the same direction as the mercury-resistance genes and the tnpR gene. The amino acid sequence predicted from this reading frame shows 32% identity with that of the transposase of the related transposon Tn3. The C-terminal regions of these two polypeptides show slightly greater homology than the N-terminal regions when conservative amino acid substitutions are considered. With this sequence determination, the nucleotide sequence of Tn501 is fully defined. The main features of the sequence are briefly presented.     

Detection and characterization of Tn2501, a transposon included within the lactose transposon Tn951

The DNA sequence spanning coordinates 9.9 to 16.4 kilobases of the lactose transposon Tn951 ( Cornelis et al., Mol. Gen. Genet. 160:215-224, 1978) constitutes a transposable element by itself. Unlike Tn951 ( Cornelis et al., Mol. Gen. Genet. 184:241-248, 1981), this element, called Tn2501 , transposes in the absence of any other transposon. Transposition of Tn2501 proceeds through transient cointegration and duplicates 5 base pairs of host DNA. Tn2501 is flanked by nearly perfect inverted repeats (44 of 48), related to the inverted repeats of Tn21 ( Zheng et al., Nucleic Acids Res. 9:6265-6278, 1982). Unlike Tn21 , Tn2501 does not confer mercury resistance.     

DNA sequence analysis of the transposon Tn3: three genes and three sites involved in transposition of Tn3.

The complete nucleotide sequence of the transposon Tn3 and of 20 mutations which affect its transposition are reported. The mutations, generated in vitro by random insertion of synthetic restriction sites, proved to contain small duplications or deletions immediately adjacent to the new restriction site. By determining the phenotype and DNA sequence of these mutations we were able to generate an overlapping phenotypic and nucleotide map. This 4957 bp transposon encodes three polypeptides which account for all but 350 bp of its total coding capacity. These proteins are the transposase, a high molecular weight polypeptide (1015 amino acids) encoded by the tnpA gene; the Tn3-specific repressor, a low molecular weight polypeptide (185 amino acids) encoded by the tnpR gene; and the 286 amino acid beta-lactamase. The 38 bp inverted repeats flanking Tn3 appear to be absolutely required in cis for Tn3 to transpose. Genetic data suggest that Tn3 contains a third site (Gill et al., 1978), designated IRS (internal resolution site), whose absence results in the insertion of two complete copies of Tn3 as direct repeats into the recipient DNA. We suggest that these direct repeats of complete copies of Tn3 are intermediates in transposition, and that the IRS site is required for recombination and subsequent segregation of the direct repeats to leave a single copy of Tn3 (Gill et al., 1978). A 23 nucleotide sequence within the amino terminus of the transposase which shares strong sequence homology with the inverted repeat may be the internal resolution site.     

Site-specific recombination by mutants of Tn21 resolvase with DNA recognition functions from Tn3 resolvase

The resolvases from the transposons Tn3 and Tn21 are homologous proteins but they possess distinct specificities for the DNA sequence at their respective res sites. The DNA binding domain of resolvase contains an amino acid sequence that can be aligned with the helix-turn-helix motif of other DNA binding proteins. Mutations in the gene for Tn21 resolvase were made by replacing the section of DNA that codes for the helix-turn-helix with synthetic oligonucleotides. Each mutation substituted one amino acid in Tn21 resolvase with either the corresponding residue from Tn3 resolvase or a residue that lacks hydrogen bonding functions. The ability of these proteins to mediate recombination between res sites from either Tn21 or Tn3 was measured in vivo and in vitro. With one exception, where a glutamate residue had been replaced by leucine, the activity of these mutants was similar to that of wild-type Tn21 resolvase. A further mutation was made in which the complete recognition helix of Tn21 resolvase was replaced with that from Tn3 resolvase. This protein retained activity in recombining Tn21 res sites, though at a reduced level relative to wild-type; the reduction can be assigned entirely to weakened binding to this DNA. Neither this mutant nor any other derivative of Tn21 resolvase had any detectable activity for recombination between res sites from Tn3. The exchange of this section of amino acid sequence between the two resolvases is therefore insufficient to alter the DNA sequence specificity for recombination.     

Tn5037-a Tn21-like mercury transposon, detected in Thiobacillus ferrooxidans

The 6645-bp mercury resistance transposon of the chemolithotrophic bacterium Thiobacillus ferrooxidans was cloned and sequenced. This transposon, named Tn5037, belongs to the Tn21 branch of the Tn21 subgroup, many members of which have been isolated from clinical sources. Having the minimum set of the genes (merRTPA), the mercury resistance operon of Tn5037 is organized similarly to most of the Gram-negative bacteria mer operons and is closest to that of Thiobacillus 3.2. The operator-promoter region of the mer operon of Tn5037 also has the common (Tn21/Tn501-like) structure. However, its inverted, presumably MerR protein binding repeats in the operator/promoter element are two base pairs shorter than in Tn21/Tn501. In the merA region, this transposon shares 77.4, 79.1, 83.2 and 87.8% identical bases with Tn21, Tn501, T. ferrooxidance E-15, and Thiobacillus 3.2, respectively. No inducibility of the Tn5037 mer operon was detected in the in vivo experiments. The transposition system (terminal repeats plus gene tnpA) of Tn5037 was inactive in Escherichia coli K12, in contrast to its resolution system (res site plus gene tnpR). However, transposition of Tn5037 in this host was provided by the tnpA gene of Tn5036, a member of the Tn21 subgroup. Sequence analysis of the Tn5037 res site suggested its recombinant nature.     

Characterization of transposon Tn5086, carrying the site-specifically inserted gene dhfrVII mediating trimethoprim resistance.

Two different enteric plasmids of widely separate origins were observed to carry a new 15.3-kb trimethoprim resistance transposon, Tn5086, also mediating resistance to mercuric ions and to a low level of sulfonamide. The trimethoprim resistance gene characterized from Tn5086 was found to be distinct from those found earlier and was designated type VII. Molecular analysis demonstrated that Tn5086 is closely related to Tn21. The internal part of Tn21 and Tn5086, the element referred to as the integron, was found to be different. First, the integron of Tn5086 contains a 0.62-kb cassette formed by the trimethoprim resistance gene dhfrVII and its immediate surroundings instead of the 0.86-kb aadA1 cassette of Tn21. Second, the integron of Tn5086 lacks a 4.2-kb segment 3' of sulI in Tn21. The dhfrVII gene commences with a UUG codon but was otherwise seen to be markedly related to the cassette genes dhfrI, dhfrV, and dhfrVI. The four related dihydrofolate reductases of 157 amino acids encoded by these genes contain a glutamate instead of the aspartic acid residue found at position 27 of the active center of the chromosomal enzyme from Escherichia coli.