Reflection contrast microscopy. Visualization of (peroxidase-generated) diaminobenzidine polymer products and its underlying optical phenomena

Reflection contrast microscopy (RCM) has proven to be a useful tool for the study of living cells (Ploem 1975). Due to the effective suppression of aspecific reflected light by polarization optics combined with a quarter lambda plate at the front lens of the objective, low intensity reflection signals originating from minor amounts of precipitated diaminobenzidine (DABox) in immunocytochemically stained specimens, can be made visible. RCM has been successfully applied in demonstrating single copy nucleic acid sequences using in situ hybridization procedures (Landegent et al. 1984). We have systematically studied the aspects of image formation of DABox by RCM by using a model system consisting of glass slides coated with peroxidase containing protein layers to determine the conditions for optimal sensitivity of this detection method. Moreover, investigations were performed to study the relationship between the amount of reflected light and DABox depending on the thickness of the object. Both theoretical and practical evidence is obtained to show that DABox detection by RCM is based on interference phenomena occurring in the layer of DABox, and less on selective reflection. This restricts the type of specimen which can be used for sensitive detection of DABox by RCM. Consequently, in ultrathin (40 nm) sections osmificated DABox was visualized in peroxidatic positive cell organelles with high contrast and resolution. Similar results were obtained with immunoperoxidase stained material embedded in Lowicryl under conditions that did not allow visualization of the staining product by bright field microscopy.     

Improved detection and quantification of the (immuno) peroxidase product using reflection contrast microscopy

Summary Reflection contrast microscopy (RCM) is a sensitive tool to detect minor amounts of precipitated diaminobenzidine (DABox) in immunoperoxidase stained specimens. One of the main issues in immunocytochemistry is the ongoing need for more sensitive and quantitative techniques. Therefore we applied RCM, using a new simple model system, to methods previously described for increased sensitivity in immunocytochemistry with bright field microscopy. Addition of imidazole was found the most sensitive method and addition of Nickel and Cobalt ions gave the most enhanced colour intensity. Variation of the enzyme reaction parameters yielded a continuous increase in reflection with time. This was then discussed in view of other model studies of peroxidase kinetics. A quantitative relationship between the amount of peroxidase and the reflection of DABox was observed, indicating that quantitative immunoperoxidase studies with RCM are feasible.In situ hybridization (ISH) was then used as a useful biological model for RCM to test the optimal conditions for DAB staining found in the model system (high concentrations of DAB and peroxidase and 2 h incubation time). There was no background staining in the model system, also after prolonged incubation time. The ISH experiments showed that the contrast (ratio) between specific signal and chromosome background did not increase in time, whereas only the use of high avPO concentrations yielded the highest contrast.     

Improved detection and quantification of the (immuno) peroxidase product using reflection contrast microscopy

Reflection contrast microscopy (RCM) is a sensitive tool to detect minor amounts of precipitated diaminobenzidine (DABox) in immunoperoxidase stained specimens. One of the main issues in immunocytochemistry is the ongoing need for more sensitive and quantitative techniques. Therefore we applied RCM, using a new simple model system, to methods previously described for increased sensitivity in immunocytochemistry with bright field microscopy. Addition of imidazole was found the most sensitive method and addition of Nickel and Cobalt ions gave the most enhanced colour intensity. Variation of the enzyme reaction parameters yielded a continuous increase in reflection with time. This was then discussed in view of other model studies of peroxidase kinetics. A quantitative relationship between the amount of peroxidase and the reflection of DABox was observed, indicating that quantitative immunoperoxidase studies with RCM are feasible. In situ hybridization (ISH) was then used as a useful biological model for RCM to test the optimal conditions for DAB staining found in the model system (high concentrations of DAB and peroxidase and 2 h incubation time). There was no background staining in the model system, also after prolonged incubation time. The ISH experiments showed that the contrast (ratio) between specific signal and chromosome background did not increase in time, whereas only the use of high avPO concentrations yielded the highest contrast.     

New sensitive light microscopical detection of colloidal gold on ultrathin sections by reflection contrast microscopy

Summary One simple post-embedding method for combined light- and electron microscopy is presented. Different types of antigens in normal rat and mouse kidneys as well as in tissues from cases of experimental induced nephritis were stained after Lowicryl K4M embedding by an immunogold (silver) method. The (silver-enhanced) gold particles were visualized by light microscopy, e.g. bright-field (BFM)- and reflection contrast (RCM) microscopy, as well as by electron microscopy. The potentials of RCM visualization in this field were investigated, resulting in the successful detection of colloidal gold (15 nm) particles, or silver enhanced gold particles, on ultrathin sections. Furthermore, an increased detection sensitivity of RCM compared with BFM together with an increase in the sensitivity of the immunostaining by RCM visualization was found. The different ways to use RCM, alone or in combination with bright-field- or phase contrast microscopy for visualization of plastic sections varying in thickness, type of plastic and staining, are discussed.     

New sensitive light microscopical detection of colloidal gold on ultrathin sections by reflection contrast microscopy. Combination of reflection contrast and electron microscopy in post-embedding immunogold histochemistry.

One simple post-embedding method for combined light- and electron microscopy is presented. Different types of antigens in normal rat and mouse kidneys as well as in tissues from cases of experimental induced nephritis were stained after Lowicryl K4M embedding by an immunogold (silver) method. The (silver-enhanced) gold particles were visualized by light microscopy, e.g. bright-field (BFM)- and reflection contrast (RCM) microscopy, as well as by electron microscopy. The potentials of RCM visualization in this field were investigated, resulting in the successful detection of colloidal gold (15 nm) particles, or silver enhanced gold particles, on ultrathin sections. Furthermore, an increased detection sensitivity of RCM compared with BFM together with an increase in the sensitivity of the immunostaining by RCM visualization was found. The different ways to use RCM, alone or in combination with bright-field- or phase contrast microscopy for visualization of plastic sections varying in thickness, type of plastic and staining, are discussed.     

Reflection contrast microscopy within chrome-alum haematoxylin stained thick tissue-sections

This paper introduces two innovations in reflection contrast microscopy (RCM): (1) an extended application for qualitative light microscopic investigations; and (2) a novel method for quantification in cytochemistry.(1) We found out that RCM cannot only be used for surface characterizations and in thin sections but also within thick tissue-sections. The use of the RCM technique is demonstrated on slides of the supraoptic nucleus (SON) of the rat stained with chrome-alum haematoxylin: Among all the stained structures only neurosecretory granules are found to cause reflections. The visualization of the neurosecretion and its distribution is more distinct and of sharper contrast than in bright field microscopy.(2) The improved differentiation allows the quantification of neurosecretion in tissue-sections by combining RCM with grey-scale image analysis.     

Reflection versus fluorescence: a note on the physical backgrounds of two types of light microscopy.

Bright microscopic images against a dark background can be originating not only from fluorescence, but also from selective reflection. Selective reflection or scattering of visible light in microscopic preparations can be used for the visualization of sometimes otherwise barely distinguishable material. The images obtained superficially resemble those from fluorescence microscopy. They do not, however, result from huminescence but from selectively reflected light with wavelengths in the region of the absorbance peak of the chromophore present in the stained biological material. The respective backgrounds of the underlying physical phenomena and the conditions under which selective reflection can occur are discussed.     

Reflection contrast microscopy of ultrathin sections in immunocytochemical localization studies: a versatile technique bridging electron microscopy with light microscopy

Reflection contrast microscopy (RCM) of ultrathin sections was recently introduced as a sensitive technique for visualization with enhanced definition in immunogold histochemistry. Experience of using RCM as a major tool in immunocytochemical research in different fields is summarized, e.g. oncology, nephrology and embryology. The sensitive visualization of immunocytochemical labels, gold particles or peroxidase-diaminobenzidine deposits in or on ultrathin sections, by RCM instead of electron microscopy is demonstrated. RCM of ultrathin sections is an adequate light microscopical alternative for immunoelectron microscopy, since an overview of both label and tissue is obtained with a high image definition and high contrast of label. In the studies presented, RCM is shown to provide a better gradation in staining intensity and staining pattern than other light microscopical methods. Moreover, a precise localization of multiple labels is obtained with this method. Besides the applications shown, ultrathin section visualization by RCM is very useful for correlative light- and electron microscopical studies of fine structures. Commercially available fluorescence microscopes can be adapted for proper RCM functioning; an adaptation scheme and list of microscopes tested is provided.     

Multicolour preparations for in situ hybridization using precipitating enzyme cytochemistry in combination with reflection contrast microscopy

We have further developed a method for the detection of different enzyme cytochemical reaction products by means of reflection contrast microscopy (RCM). By embedding these enzyme precipitates in a protein matrix, we were able to prevent the reaction products from dissolving in immersion oil, which is required for RCM analysis. The applicability of the RCM procedure is, therefore, extended to a range of cytochemical enzyme precipitation methods, which normally result in oil soluble reaction products. To test their usefulness, these enzyme precipitates have been used in single- as well as double-label in situ hybridization (ISH) procedures to visualize a number of DNA target sequences by several different reflection colours, i.e. white, yellow and red. Three repetitive DNA probes for the (sub)centromeric regions of chromosomes 1, 7 and 17, as well as a repetitive DNA probe for the telomeric region of chromosome 1, and two cosmid DNA probes (40 kb each) for both arms of chromosome 11 could be detected with high efficiency in both interphase and metaphase preparations. Moreover the enzyme precipitates were shown to be stable upon exposure to excitation light or upon storage. It may be concluded that these findings render RCM a sensitive method for the visualization of multiple targets in biological specimens.Presented in part at the 9th International Congress of Histochemistry and Cytochemistry, 30 August – 5 September 1992, Maastricht, The Netherlands (Speel et al. 1992c)     

REFLECTIVE PROPERTIES OF THE STIGMA IN MALE GAMETES OF ECTOCARPUS SILICULOSUS (PHAEOPHYCEAE) STUDIED BY CONFOCAL LASER SCANNING MICROSCOPY1

The reflection properties of the stigma in male gametes of Ectocarpus siliculosus (Dillw.) Lyngbye were investigated using confocal laser scanning microscopy in the epireflection contrast mode. The complex reflection pattern obtained after optical xy (horizontal) and xz (vertical) sectioning was consistent with stigma ultrastructure as revealed by serial thin sections. The intensity and pattern of the reflection signal varied with the orientation of the cell/stigma to the incident laser light. Maximal reflection occurred only in approximately normal orientation of the stigma to the light source. Focusing of reflected light from an elongated concave depression of the stigma on the region of the flagellar swelling was observed in xy and xz sections of living and fixed gametes. The results indicate the importance of mechanisms (focusing) other than quarter-wave interference reflection in signal amplification by the eyespot of flagellate algae.     

Reflective properties of different eyespot types in dinoflagellates

The reflective properties of different types of dinoflagellate eyespots were investigated using confocal laser scanning microscopy in the epireflection contrast mode. Although the eyespots studied differed with respect to localization (cytosol or plastid) and organization of the globule layer(s), all types effectively absorbed and reflected blue-green laser light (principal lines of 488/514 nm). The relative orientation of the eyespot surface towards the light source strongly influenced the reflective properties. Maximal reflection occurred when the eyespot surface was approximately perpendicular to the light source and rapidly decreased at increasing angles of light incidence. Horizontal and vertical optical sectioning of live and fixed cells resolved differences in the reflection patterns. Focusing of reflected light on the basal portion of the longitudinal flagellum was observed for the cytosolic eyespot of Glenodinium sp. and the triple membrane-bounded eyespot of Peridinium foliaceum, presumably a vestige of a host plastid. This flagellum is thought to be mainly involved in mediating orientational movement responses. In contrast, the reflection patterns obtained from the eyespot of Woloszynskia pascheri, which represents the third and most commonly observed dinoflagellate eyespot type within a plastid, point to only minor focusing. Reflection signals could be followed a considerable distance into the sulcus in all cases, indicating that in dinoflagellate eyespots, irrespective of the presumed receptor location (plasma membrane overlying the eyespot and/or the basal part of the longitudinal flagellum), back reflection of non-absorbed light can enhance the excitation probability of the photoreceptor(s). Such a combined reflection/absorption screen allows maximal contrast modulation and will, in conjunction with the specialized geometry of the dinoflagellate eyespots, increase the directionality of these eyespot aparatuses considerably.     

Quantification of protein A-gold staining for peroxisomal enzymes by confocal laser scanning microscopy.

The protein A-gold technique has been widely applied for visual localization and quantification of various antigens by electron microscopy. Observation of specimens stained by the protein A-gold technique with conventional light microscopy is difficult because of insufficient sensitivity of the staining. Light microscopic visualization and quantification of the reaction products were attempted employing a confocal laser scanning microscope (CLSM). Liver tissues of normal and peroxisome proliferator-treated rats were fixed and embedded in Lowicryl K4M resin. Ultrathin and thin sections were stained for catalase and a peroxisome-specific beta-oxidation enzyme by the protein A-gold technique. Ultrathin sections were observed by electron microscopy and the labeling density for each enzyme was analyzed with an image analyzer. Thin sections were observed with a CLSM in the reflection mode and the intensity of the light reflection was analyzed under the same conditions for all specimens. A comparison of these two observation procedures was also attempted using liver tissues stained with various concentrations of the antibody for catalase. The intensity of the reflection for each, as observed by CLSM, correlated well with the labeling density observed by electron microscopy. CLSM made it possible to quantify and to directly observe protein A-gold staining at the light microscopic level.(J Histochem Cytochem 47:1343-1349, 1999)     

Microorganisms in Unamended Soil as Observed by Various Forms of Microscopy and Staining

A light-diffraction microscope was modified to allow sequential viewing of the microorganisms in a soil smear by transmitted, reflected, and reflected-polarized incandescent light and by reflected ultraviolet light. Observations were also made by conventional incandescent and ultraviolet transmitted-light microscopy. All results for the various forms of bright-field microscopy with stained and unstained soils were in agreement, but they differed from the results obtained for two types of ultraviolet-fluorescence microscopy. The latter proved to be nonspecific for in situ soil microorganisms. Capsule-like areas were noted surrounding many of the resident microbial cells of soil when viewed by the various forms of bright-field microscopy. These areas could not be stained or removed by a variety of treatments, but they apparently often did take up stain after in situ soil growth had been initiated. It was concluded that these areas are not capsules but may represent a structural component of nonmultiplying microbial cells in soil.     

Local cell membrane deformations due to receptor-ligand bonding as seen by reflection microscopy

Understanding surface receptor clustering and redistribution processes at the cell-matrix contact zone requires detailed knowledge of the spatial integration of these molecules in the architecture of this complex interface. Here we present and discuss critically a procedure to extract such information combining reflection contrast microscopy (RCM) and reflection interference microscopy (RIM). As model system, we used living human umbilical vein endothelial cells (HUVEC) adhering to laminin-coated surfaces and investigated the distribution of the alpha2beta1 (CD29/CD49b) integrin at the contact zone of these cells. First, we applied freeze-fracture electron microscopy to gain information on microscopic details of the alpha2beta1 distribution at the contact zone. Next, we visualized and analyzed the overall lateral distribution of the integrins applying RCM using immunogold-labeling with 10 nm labels and a special silver enhancement technique. We found that RCM can be used to determine the lateral position of the marked receptor molecules to an accuracy of about 100-200 nm, instead of large morphological changes at the contact zone during silver enhancement. Finally, we combined RCM with RIM and analyzed the interference pattern of the contact zone around the label positions. Thus, we were able to detect changes of the average shape of the cell membrane due to receptor-ligand bonding of a size down to the resolution of the techniques.     

THE USE OF INTERFERENCE REFLECTION CONTRAST IN THE EXAMINATION OF DIATOM VALVES

Even though scanning electron microscopy (SEM) is now needed to identify some species of diatoms, the majority of identifications and quantification of these organisms in ecological works is accomplished with a light microscope, using transmitted light optical methods. In this paper we demonstrate the use of interference reflection contrast (incident light) for the examination of diatoms, a method that significantly improves the resolution of structural detail, and therefore, identification of diatom taxa with light microscopy. Using incident light we were routinely able to distinguish between structures that were close to the theoretical limit of resolution for visible light, and that were not resolvable with such standard transmitted light techniques as phase contrast and differential interference contrast (DIC). Light microscopes with epi-illumination light paths can be easily and inexpensively outfitted to use this simple technique.
Abbreviations:  DIC, differential interference contrast; IRC, interference reflection contrast; LM, light microscopy     

Partial inversion of the secondary constriction of chromosome 9: It exists

Summary A comparison was made between different microscopic techniques in order to determine which is the best method for recognizing the fragile sites on X chromosomes. Orceinstained mitoses observed in phase contrast showed the highest percentage of fragile X chromosomes. Similar results were obtained by reflection contrast microscopy of mitoses stained briefly with Giemsa solution. Nomarski interference contrast was less suitable and brightfield microscopy was the least suitable technique of those tested.     

Diffraction contrast in reflection electron microscopy—I. Screw dislocation

The diffraction contrast theory has been used to anslyze the reflection electron microscopy (REM) image features of a normally emerging screw dislocation and the dependence of these features on the incident beam conditions. The reflected beam rocking curve has been assumed to be a Gaussian-like function but with different half-widths on the two sides of a specific Bragg angle. The calculated images show some fine structures around the dislocation core which depend on the incident beam conditions. This dependence suggests a method of measuring the rotation field from surface defects. Experimentally obtained REM images show features which are in good agreement with the diffraction contrst theory.     

Reflection versus fluorescence

Summary Bright microscopic images against a dark background can be originating not only from fluorescence, but also from selective reflection. Selective reflection or scattering of visible light in microscopic preparations can be used for the visualization of sometimes otherwise barely distinguishable material. The images obtained superficially resemble those from fluorescence microscopy. They do not, howeverm result from luminescence but from selectively reflected light with wavelengths in the region of the absorbance peak of the chromophore present in the stained biological material. The respective backgrounds of the underlying physical phenomena and the conditions under which selective reflection can occur are discussed.     

A method for studying histochemical reactions in intact human dentine with a polarizing incident light microscope

Localization and distribution of non-specific esterases has been studied in intact human dentine, by reflected light microscopy. The method of specimen preparation described here permits the visualization of optical sections in depth within the specimen at high optical resolution. Non-specific esterase was found deposited as discrete bands across the tubules. or as droplets, or as a diffuse microsomal variety in the dentinal tubules and in the interglobular spaces. It was possible to distinguish the droplet variety from the microsomal variety, of esterase within the same tubule, by means of a novel optical method using antiflex and differential interference contrast systems of reflected light microscopy. It was found that the coefficient of reflection of dentine diminished gradually from the enamel to the pre-dentine and was inversely related to the scattering of light in dentine. This scattering plays an important role in the formation of the image with reflected light microscopy. The reflected light microscope offers an economically attractive alternative or a supplementary mode of microscopy to the confocal scanning microscopes for studying intact dentine at varying depths.     

Optical techniques for imaging membrane topography

In recent years three powerful optical imaging techniques have emerged that provide nanometer-scale information about the topography of membrane surfaces, whether cellular or artificial: intermembrane fluorescence resonance energy transfer (FRET), fluorescence interference contrast microscopy (FLIC), and reflection interference contrast microscopy (RICM). In intermembrane FRET, the sharp distance dependence of resonant energy transfer between fluorophores allows topographic measurements in the Angstrom to few-nanometer range. In FLIC and RICM, interference between light from a membrane (either from fluorescent probes, or reflected illumination) and light reflected by a planar substrate provide spatial sensitivity in the few to hundreds of nanometer range, with few-nanometer resolution. All of these techniques are fairly easy to implement. We discuss the physics and optics behind each of these tools, as well as practical concerns regarding their uses. We also provide examples of their application in imaging molecular-scale structures at intermembrane junctions.