基于傅里叶变换红外光谱的葡萄褐斑病研究

利用傅里叶变换红外(Fourier Transform Infrared,FTIR)光谱研究了葡萄褐斑病病叶和正常叶片。测试分析了大褐斑病叶病斑处和非病斑处、小褐斑病叶病斑处和非病斑处、未染病正常叶片的红外光谱,结果显示:葡萄叶片光谱主要由碳水化合物、蛋白质、脂类的吸收带组成。褐斑病叶片光谱与正常叶片红外光谱变化主要在1 800-1 500 cm-1范围脂类、蛋白质酰胺的吸收区和1 200-900 cm-1范围多糖的吸收区。用1 800-1 500 cm-1范围拟合峰的峰面积比A1657/A1517考察蛋白质相对含量变化,A1738/A11517考察脂类相对含量变化,用吸光度比I1066/I1441考察多糖相对含量变化,结果显示患褐斑病的葡萄叶中脂类、蛋白质、糖类等营养物质含量降低。褐斑病和正常葡萄叶红外光谱的二阶导数光谱结合聚类分析方法,利用1 800-1 500 cm-1与1 200-900 cm-1范围数据进行聚类分析,结果将正常叶片与患褐斑病叶片准确区分开。证明褐斑病叶片红外光谱在1 800-1 500 cm-1与1 200-900 cm-1范围为敏感谱带。     

朝鲜毛球蚧蜡泌物的超微形态与红外光谱特征

采用扫描电镜和红外光谱技术研究了朝鲜毛球蚧Didesmococcus koreanus在不同发育阶段蜡泌物的超微形态和化学成分。结果发现：该虫在低龄期的蜡泌物的形态是长丝状,到3龄和成虫期是由湿蜡凝结成不同大小的颗粒,块状和片状。雄虫蜡壳是薄蜡片构成,表面呈鱼鳞状凹凸。低龄期若虫蜡泌物的红外光谱特征与雌成虫的十分相似,说明二者所含的主要化学成分是相同的,雄虫和低龄若虫及雌成虫蜡壳萃取物的红外光谱的吸收峰型基本一致,但在1 240.7 cm^-1处出现一个中等强度的特征峰,这充分说明3种蜡泌物的有机化合物种类和结构一致,只是雄虫分泌物与另二者比较具有特征官能团,从而,利用该吸收峰可以区别出雄虫。此外,根据红外光谱特征分析,可以知道该虫蜡泌物的化学成分主要为长链脂肪酸、脂肪醇和一些带芳香环的化合物。     

马尾松正常木与应压木的比较解剖

用光学显微镜和扫描电镜观察比较了马尾松(Pinus massoniana)正常木与应压木的结构差异。研究结果表明:马尾松应压木从早材到晚材呈缓变,管胞在横切面上除生长轮分界处的两侧外均为圆形,管胞之间具明显的胞间隙;管胞的次生壁仅有 S_1和 S_2两层;次生壁上螺纹间隙和螺纹裂隙都很明显,并与 S_2层微纤丝平行。此外,还初步讨论了应压木形成的可能机理。     

瘤坚大球蚧蜡泌物的超微形态与红外光谱特征

采用扫描电镜和红外光谱技术研究了瘤坚大球蚧Eulecanium gigantea在不同发育阶段蜡泌物的超微形态和化学成分。结果发现：该虫在低龄期分泌湿蜡,最初在虫体背面凝结成晶体状的不同大小颗粒,接着连接成片状和块状构造,最后蜡质堆积形成龟背状蜡壳。蜡壳的各个板块与体壁上突起的腺孔分布区位置相对应。雄虫蜡壳与低龄期若虫蜡壳质地相同。雌成虫分泌的蜡质为长而卷曲的空心蜡丝。雌成虫背面和腹面蜡泌物的红外光谱特征说明二者所含的主要化学基团和成分是相同的。尽管雄虫蜡壳与雌虫的化学成分基本相似,但存在的官能团有明显差别,主要表现在雄虫蜡泌物光谱图上1736.3 cm^-1处出现两个吸收峰,而雌虫只有一个;在振动频率1 242.0 cm^-1～1 106.6 cm^-1出现3个C-O键振动峰,而雌虫的是一系列锯齿状长碳链-C-C-C-骨架振动峰。根据红外光谱特征分析,推测该虫蜡泌物的化学成分可能主要是由长链烃、长链脂肪酸、脂肪醇和某些带芳香环的化合物组成。     

利用红外光谱和高效液相色谱比较分析不同产地红根草丹参酮ⅡA含量

红根草是广西道地药材,丹参酮ⅡA是红根草的主要活性作用成分之一,因此,筛选出丹参酮ⅡA含量高的优良种质,对解决红根草资源紧缺问题及提高其药材质量均有重要作用。本研究利用傅里叶红外光谱技术对不同产地红根草化学成分的红外吸收特征峰进行了测定,利用HPLC技术不同产地红根草中丹参酮ⅡA含量,同时,借助化学计量学方法比较分析了不同产地样品的红外光谱吸收峰与丹参酮ⅡA相关性。结果表明,不同产地红根草化学成分组成比较相似,但化学成分的含量却有较大差异。多元对数相关分析技术显示,1 734 cm~(-1)、1 632 cm~(-1)、1 548 cm~(-1)、1 515 cm~(-1)、830 cm~(-1)及789 cm~(-1)等处附近的吸收强度与实际测定不同产地红根草丹参酮ⅡA含量均有密切关系。两种方法均一致显示,丹参酮ⅡA含量以江西南丰类型最高,其次是广西钟山类型,其中以江西奉新类型含量最低。     

表达广谱抗真菌蛋白转基因水稻秸秆的化学成分与纤维素结构

为了给表达广谱抗真菌蛋白转基因水稻的安全性评估提供基础数据,本文以表达广谱抗真菌蛋白转基因水稻转品1和转品8及非转基因七丝软粘（对照）为试材,对其秸秆化学成分进行分析,同时,采用傅立叶变换红外光谱（FTIR）和X 射线衍射（XRD）方法观察秸秆中不同部位纤维素结构的变化情况。研究结果显示：（1）转基因水稻转品1和转品8与对照在秸秆相同部位的化学成分含量不存在显著差异;（2）转基因水稻转品1和转品8及对照在秸秆相同部位纤维素的红外吸收峰形状基本一致,且品种间的吸收峰强度和结晶指数(O′KI和N〖KG-*2〗·〖KG-*4〗O′KI)也无显著差异;（3）转品1和转品8秸秆的X 射线衍射图与对照相似,且结晶度(CrI)与对照无显著差异。综上所述,广谱抗真菌基因的导入不会对水稻的化学成分、纤维素结构及晶体结构产生明显影响。     

表达广谱抗真菌蛋白转基因水稻秸秆的化学成分与纤维素结构

为了给表达广谱抗真菌蛋白转基因水稻的安全性评估提供基础数据,本文以表达广谱抗真菌蛋白转基因水稻转品1和转品8及非转基因七丝软粘(对照)为试材,对其秸秆化学成分进行分析,同时,采用傅立叶变换红外光谱(FTIR)和X-射线衍射(XRD)方法观察秸秆中不同部位纤维素结构的变化情况。研究结果显示:(1)转基因水稻转品1和转品8与对照在秸秆相同部位的化学成分含量不存在显著差异;(2)转基因水稻转品1和转品8及对照在秸秆相同部位纤维素的红外吸收峰形状基本一致,且品种间的吸收峰强度和结晶指数(O'KI和N·O'KI)也无显著差异;(3)转品1和转品8秸秆的X-射线衍射图与对照相似,且结晶度(CrI)与对照无显著差异。综上所述,广谱抗真菌基因的导入不会对水稻的化学成分、纤维素结构及晶体结构产生明显影响。     

腐烂等级、径级对典型阔叶红松林红松倒木物理化学性质的影响

倒木是森林生态系统的重要组成部分, 在地力维护、生物多样性保持以及碳(C)和养分循环等方面具有重要意义, 但倒木物理化学性质随其腐烂等级和径级而变化。为了深入理解腐烂等级和径级对倒木物理化学性质的影响, 该研究以典型阔叶红松林的建群种——红松(Pinus koraiensis)的倒木为研究对象, 将其每个腐烂等级(I-V)下的倒木分为4个径级(径级i ≤ 10.0 cm、径级ii 10.1-30.0 cm、径级iii 30.1-50.0 cm、径级iv >50.0 cm), 研究了不同腐烂等级、径级及两者交互作用对倒木心材和边材物理化学性质的影响。结果表明: 心材和边材具有相似的变化规律。倒木心材和边材含水率随着腐烂等级增加而增加, 而木材密度随腐烂等级和径级的增加均呈下降趋势; 边材C含量以及心材和边材的氮(N)、磷(P)含量随腐烂等级增加呈上升趋势, 心材N、P含量随径级增加呈先增加后减少的趋势; 纤维素含量随腐烂等级增加呈下降趋势, 而木质素含量呈上升趋势, 纤维素和木质素含量随径级增加没有明显变化规律。倒木含水率与C、N、P、木质素含量(除心材P含量)显著正相关, 与纤维素含量显著负相关; 木材密度与C、N、P、木质素含量显著负相关, 与纤维素含量显著正相关。由此可见, 倒木物理化学性质受不同腐烂等级和径级的影响有各自的变化规律, 且倒木的物理性质(含水率和木材密度)是影响化学含量变化的重要因素。     

动脉粥样硬化斑块的微区拉曼光谱检测

为探讨动脉粥样硬化斑块的微区拉曼光谱特征,以球囊损伤日本长耳白兔右侧颈总动脉后予以高脂饮食喂养,在实验过程中监测体重和血脂变化情况。3个月后,以中国斑点蝰蛇毒和组胺加以触发使斑块破裂,将动物处死并查找动脉硬化斑块,动脉组织经大体病理分类后,进行微区拉曼光谱及病理检测。结果显示:动脉粥样硬化斑块的拉曼光谱图在1450及1660cm-1处均有明显的胆固醇等脂质特征峰。特征峰曲线下相对面积统计结果表明:明显动脉粥样硬化斑块的谱峰下相对面积(5.80×10-3±3.51×10-3)显著高于轻度动脉粥样硬化组织(2.01×10-3±1.49×10-3)及正常动脉组织(1.01×10-3±0.94×10-3),P<0.05。正常动脉组织拉曼光谱曲线较光滑,无明显特征峰。血栓形成处拉曼光谱图荧光背底较强,未见特征谱峰。该研究结果证明微区拉曼光谱可以对动脉粥样硬化斑块的胆固醇等脂质含量进行特异性定量检测,表明微区拉曼光谱是评估动脉粥样硬化程度及斑块稳定性的可行方法。     

短梗霉黑色素的分离纯化及结构的初步分析

采用热碱提取、水煮酸沉法从短梗霉发酵液中提取得到黑色素粗品,再经DMSO萃取、酸性甲醇(pH=2)沉淀得到不含多糖和蛋白的短梗霉黑色素。此黑色素不溶于水及常规有机溶剂,可溶于碱性溶液和DMSO;离子交换色谱分析表明黑色素组分均一,出峰时间26±0.5 m in;紫外光谱谱图最大吸收峰为215 nm左右,未见蛋白(280 nm)与核酸(260 nm)的特征吸收峰;红外光谱谱图具有黑色素3μm和6μm的特征吸收峰,并含大量的羟基、氨基,与核磁共振和液质联机谱图结合分析推出短梗霉黑色素可能含有酚羟基、羧基和吲哚等官能团,主要结构骨架为5,6-二羟基吲哚-羧酸和多巴醌,推断该黑色素为酪氨酸酶控制合成的真黑素。     

Amino-Acid Composition of Wood Proteins

The ammo-acid compositions of proteins present in the sapwoodand heartwood from three species of Eucalyptus, in normal, reaction,and opposite wood from Pinus radiata seedlings, and in reactionand opposite wood from Eucalyptus goniocalyx, are listed. Thequestion of the location of protein within wood cell walls isdiscussed. The amounts of tyrosine found in the woods from P.radiata seedlings are incompatible both with the belief thatit determines the intensity of staining of reaction wood cellwalls with Millon's reagent, and that it is the source of thep-hydroxybenzaldehyde obtained when milled wood lignin is oxidizedwith nitrobenzene. Loss of amino acids in the presence of milledwood lignin, -cellulose, hemicellulose, glucose, mannose, galactose,xylose, arabinose, glucuronic, and galacturonic acids is demonstrated.The presence of numerous peaks which are not indentifiable withknown amino acids in the chromatograms of wood hydrolysatesis believed to be due largely to the products of interactionof amino acids and sugars. Some retention of nitrogen by theresidues of wood hydrolysates occurs. The significance of theresults obtained with the wood samples listed above is discussedagainst this background.     

Activities of some enzymes of lignin formation in reaction wood of Thuja orientalis,Metasequoia glyptostroboides and Robinia pseudoacacia

The activities of the following five enzymes which are involved in the formation of lignin have been compared in reaction wood and in opposite wood: phenylalanine ammonia lyase (EC 4.3.1.5), caffeate 3-O-methyltransferase (EC 2.1.1.-), p-hydroxycinnamate: CoA ligase (EC 6.2.1.12), cinnamyl alcohol dehydrogenase (EC 1.1.1.-) and peroxidase (EC 1.11.1.7). The activities of the four first-named enzymes in the compression wood of Thuja orientalis L. and Metasequoia glyptostroboides Hu et Cheng were 2.8±1.4-fold and 2.6±1.5-fold higher than those in opposite wood, respectively, whereas peroxidase had the same level of activity in either type of wood. On the other hand, no differences were observed in the activities of the five enzymes between tension and opposite woods of Robinia pseudoacacia L. These findings are well in accord with the chemical structure of lignin in the compression and tension woods of the three species studied: high content of lignin rich in condensed units in compression wood, and little difference in lignin between tension and opposite woods.Abbreviations CAD cinnamyl alcohol dehydrogenase (EC 1.1.1.-) - OMT caffeate O-methyltransferase (EC 2.1.1-) - PAL phenylalanine ammonia lyase (EC 4.3.1.5) - PCL p-hydroxycinnamate: CoA ligase (EC 6.2.1.12) - PO peroxidase (EC 1.11.1.7)     

Quantification of compression wood severity in tracheids of Pinus radiata D. Don using confocal fluorescence imaging and spectral deconvolution

Confocal fluorescence microscopy was used to examine the spectral characteristics of lignin autofluorescence in secondary cell walls of normal and compression wood from Pinus radiata. Using UV excitation, fluorescence spectra of normal and compression wood sections showed significant differences, especially in the outer secondary cell wall of tracheids, with a shift in maxima from violet to blue wavelengths between normal and compression wood. A comparison of normal wood, mild and severe compression wood, showed that the wavelength shift was intermediate in the mild compression wood compared to the severe compression wood, thus offering the possibility of quantifying the severity by measuring ratios of fluorescence at violet and blue wavelengths. Fluorescence induced by blue light, rather than UV, was less well differentiated amongst wood types. Spectral deconvolution indicated the presence of a minimum of five discrete lignin fluorophores in the cell walls of both normal and compression wood tracheids. Comparison with lignin model compounds suggest that the wavelength shift may correspond in part to increased levels of p-hydroxy type lignin in the compression wood samples. The combination of confocal fluorescence imaging and related spectral deconvolution therefore offers a novel technique for characterising cell wall lignin in situ.     

Chemical Composition of Cacti Wood and Comparison with the Wood of Other Taxonomic Groups

The aims of this study were to determine the wood chemical composition of 25 species of Cactaceae and to relate the composition to their anatomical diversity. The hypothesis was that wood chemical components differ in relationship to their wood features. The results showed significant differences in wood chemical compounds across species and genera (P < 0.05). Pereskia had the highest percentage of lignin, whereas species of Coryphantha had the lowest; extractive compounds in water were highest for Echinocereus, Mammillaria, and Opuntia. Principal component analysis showed that lignin proportion separated the fibrous, dimorphic, and non‐fibrous groups; additionally, the differences within each type of wood occurred because of the lignification of the vascular tissue and the type of wall thickening. Compared with other groups of species, the Cactaceae species with fibrous and dimorphic wood had a higher lignin percentage than did gymnosperms and Acer species. Lignin may confer special rigidity to tracheary elements to withstand desiccation without damage during adverse climatic conditions.     

Asymmetric expression of a poplar ACC oxidase controls ethylene production during gravitational induction of tension wood

Ethylene is produced in wood-forming tissues, and when applied exogenously, it has been shown to cause profound effects on the pattern and rate of wood development. However, the molecular regulation of ethylene biosynthesis during wood formation is poorly understood. We have characterised an abundant 1-aminocyclopropane-1-carboxylic acid (ACC) oxidase gene (PttACO1) in the wood-forming tissues of Populus tremula (L.) x P. tremuloides (Michx). PttACO1 is primarily expressed in developing secondary xylem, and is specifically upregulated during secondary wall formation. Nevertheless, according to GC-MS analysis combined with tangential cryosectioning, the distribution of ACC was found to be fairly uniform across the cambial-region tissues. Gravitational stimulation, which causes tension wood to form on the upper side of the stem, resulted in a strong induction of PttACO1 expression and ACC oxidase activity in the tension wood-forming tissues. The ACC levels increased in parallel to the PttACO1 expression. However, the increase on the upper (tension wood) side was only minor, whereas large amounts of both ACC and its hydrolysable conjugates accumulated on the lower (opposite) side of the stem. This suggests that the relatively low level of ACC on the tension wood side is a result of its conversion to ethylene by the highly upregulated PttACO1, and the concurrent accumulation of ACC on the opposite side of the wood is because of the low PttACO1 levels. We conclude that PttACO1 and ACC oxidase activity, but not ACC availability, are important in the control of the asymmetric ethylene production within the poplar stem when tension wood is induced by gravitational stimulation.     

Cellulose and lignin biosynthesis is altered by ozone in wood of hybrid poplar (Populus tremula × alba)

Wood formation in trees is a dynamic process that is strongly affected by environmental factors. However, the impact of ozone on wood is poorly documented. The objective of this study was to assess the effects of ozone on wood formation by focusing on the two major wood components, cellulose and lignin, and analysing any anatomical modifications. Young hybrid poplars (Populus tremula × alba) were cultivated under different ozone concentrations (50, 100, 200, and 300 l l(-1)). As upright poplars usually develop tension wood in a non-set pattern, the trees were bent in order to induce tension wood formation on the upper side of the stem and normal or opposite wood on the lower side. Biosynthesis of cellulose and lignin (enzymes and RNA levels), together with cambial growth, decreased in response to ozone exposure. The cellulose to lignin ratio was reduced, suggesting that cellulose biosynthesis was more affected than that of lignin. Tension wood was generally more altered than opposite wood, especially at the anatomical level. Tension wood may be more susceptible to reduced carbon allocation to the stems under ozone exposure. These results suggested a coordinated regulation of cellulose and lignin deposition to sustain mechanical strength under ozone. The modifications of the cellulose to lignin ratio and wood anatomy could allow the tree to maintain radial growth while minimizing carbon cost.     

How does a gymnosperm branch (Pseudotsuga menziesii) assume the hydraulic status of a main stem when it takes over as leader?

In most gymnosperms, resistance to the flow of water per unit path length through the main stem is less than that of lateral branches. Using branches, leaders, and branches that have replaced missing leaders ('branch-leaders'), we tested the hypothesis that branch-leaders are at a hydraulic disadvantage. Reduced xylem transport efficiency in branch-leaders relative to leaders could be expected both because of an initial disparity in hydraulic capacity, and because of the relatively impermeable compression wood formed in branch-leaders during shoot reorientation. By subsampling branch-leaders, we also tested the hypothesis that opposite wood (formed directly opposite compression wood) is more permeable than normal wood, and could, therefore, compensate for the presence of compression wood at the whole shoot level. Fifteen months after leader removal, branch-leaders were intermediate between branches and leaders in their ability to supply foliage with water, suggesting a transition towards leader status that was not yet complete. Increased hydraulic capacity in branch-leaders was the result of increased xylem cross-sectional area per unit foliage, rather than an increase in permeability. Among subsampled wood types from basal branch-leader segments, opposite wood was significantly less permeable than normal wood, suggesting that it does not compensate for the presence of compression wood.     

Single-Cell Protein Production in Alkaline Mesquite Wood Extracts

A nine-member, mixed, cellulolytic, bacterial culture was used to evaluate the effects of sodium hydroxide normality, length and temperature of treatment, and the ratio of volume of alkali to mesquite wood on the suitability of alkali mesquite wood extractives as nutrients for bacterial growth. The presence or absence of air during the extraction process did not significantly affect results. The amount of lignin extracted and the total loss in weight of the wood during extraction were correlated to both alkali concentration and temperature. Neutralized extracts supported bacterial growth; growth was inversely related to the final salt concentration of the neutralized extract. Deionized extracts were superior to acid-neutralized extracts for the support of bacterial growth. The optimum conditions for extraction were 2.5 N NaOH at 30°C for 12 h. The study demonstrated that nutrients as well as growth inhibitory compounds are released from wood by alkali treatment. This study of alkali wood extracts and the previous study of washed alkali treated wood residues provide a data base for the optimization of alkali treatments of hard woods that are to be used as nutrients for the growth of cellulolytic cultures.     

Changes in the Chemical Composition and Decay Resistance of Thermally-Modified Hevea brasiliensis Wood

In this study the effect of thermal treatment on the equilibrium moisture content, chemical composition and biological resistance to decay fungi of juvenile and mature Hevea brasiliensis wood (rubber wood) was evaluated. Samples were taken from a 53-year-old rubber wood plantation located in Tabapuã, Sao Paulo, Brazil. The samples were thermally-modified at 180°C, 200°C and 220°C. Results indicate that the thermal modification caused: (1) a significant increase in the extractive content and proportional increase in the lignin content at 220°C; (2) a significant decrease in the equilibrium moisture content, holocelluloses, arabinose, galactose and xylose content, but no change in glucose content; and (3) a significant increase in wood decay resistance against both Pycnoporus sanguineus (L.) Murrill and Gloeophyllum trabeum (Pers.) Murrill decay fungi. The greatest decay resistance was achieved from treatment at 220°C which resulted in a change in wood decay resistance class from moderately resistant to resistant. Finally, this study also demonstrated that the influence of thermal treatment in mature wood was lower than in juvenile wood.