Quantitation of the capacity of the secretion apparatus and requirement for PrsA in growth and secretion of alpha-amylase in Bacillus subtilis

Regulated expression of AmyQ alpha-amylase of Bacillus amyloliquefaciens was used to examine the capacity of the protein secretion apparatus of B. subtilis. One B. subtilis cell was found to secrete maximally 10 fg of AmyQ per h. The signal peptidase SipT limits the rate of processing of the signal peptide. Another limit is set by PrsA lipoprotein. The wild-type level of PrsA was found to be 2 x 10(4) molecules per cell. Decreasing the cellular level of PrsA did not decrease the capacity of the protein translocation or signal peptide processing steps but dramatically affected secretion in a posttranslocational step. There was a linear correlation between the number of cellular PrsA molecules and the number of secreted AmyQ molecules over a wide range of prsA and amyQ expression levels. Significantly, even when amyQ was expressed at low levels, overproduction of PrsA enhanced its secretion. The finding is consistent with a reversible interaction between PrsA and AmyQ. The high cellular level of PrsA suggests a chaperone-like function. PrsA was also found to be essential for the viability of B. subtilis. Drastic depletion of PrsA resulted in altered cellular morphology and ultimately in cell death.     

A deletion that includes the signal peptidase cleavage site impairs processing, glycosylation, and secretion of cell surface yeast acid phosphatase.

We transformed Saccharomyces cerevisiae with a high-copy-number plasmid carrying either the wild-type gene coding for a repressible cell surface acid phosphatase or two modified genes whose products lack a 13- or 14-amino-acid segment spanning or immediately adjacent to the signal peptidase cleavage site. The wild-type gene product underwent proteolytic cleavage of the signal peptide, core glycosylation, and outer chain glycosylation. The deletion spanning the signal peptidase cleavage site led to an unprocessed protein. This modified protein exhibited core glycosylation, whereas its outer chain glycosylation was severely inhibited. Secretion of the deleted protein was impaired, and active enzyme accumulated within the cell. The deletion immediately adjacent to the signal peptidase cleavage site exhibited only a small decrease in the efficiency of processing and had no effect on the efficiency of secretion.     

Signal peptide peptidase- and ClpP-like proteins of Bacillus subtilis required for efficient translocation and processing of secretory proteins.

Signal peptides direct the export of secretory proteins from the cytoplasm. After processing by signal peptidase, they are degraded in the membrane and cytoplasm. The resulting fragments can have signaling functions. These observations suggest important roles for signal peptide peptidases. The present studies show that the Gram-positive eubacterium Bacillus subtilis contains two genes for proteins, denoted SppA and TepA, with similarity to the signal peptide peptidase A of Escherichia coli. Notably, TepA also shows similarity to ClpP proteases. SppA of B. subtilis was only required for efficient processing of pre-proteins under conditions of hyper-secretion. In contrast, TepA depletion had a strong effect on pre-protein translocation across the membrane and subsequent processing, not only under conditions of hyper-secretion. Unlike SppA, which is a typical membrane protein, TepA appears to have a cytosolic localization, which is consistent with the observation that TepA is involved in early stages of the secretion process. Our observations demonstrate that SppA and TepA have a role in protein secretion in B. subtilis. Based on their similarity to known proteases, it seems likely that SppA and TepA are specifically required for the degradation of proteins or (signal) peptides that are inhibitory to protein translocation.     

Characterisation of preYvaY export reveals differences in the substrate specificities of Bacillus subtilis and Escherichia coli leader peptidases

Translocation, processing and secretion of YvaY, a Bacillus subtilis protein of unknown function, were characterised both in B. subtilis and in Escherichia coli. In its natural host B. subtilis, YvaY was transiently synthesised at the end of the exponential growth phase. It was efficiently secreted into the culture supernatant in spite of a calculated membrane spanning domain in the mature part of the protein. In E. coli, despite the high conservation of Sec-dependent transport components, processing of preYvaY was strongly impaired. To uncover which elements of E. coli and B. subtilis translocation systems are responsible for the observed substrate specificity, components of the B. subtilis Sec-system were co-expressed besides yvaY in E. coli. Expression of B. subtilis secA or secYEG genes did not affect processing, but expression of B. subtilis signal peptidase genes significantly enhanced processing of preYvaY in E. coli. While the major signal peptidases SipS or SipT had a strong stimulatory effect on preYvaY processing, the minor signal peptidases SipU, SipV or SipW had a far less stimulatory effect in E. coli. These results reveal that targeting and translocation of preYvaY is mediated by the E. coli Sec proteins but processing of preYvaY is not performed by E. coli signal peptidase LepB. Thus, differences in substrate specificities of E. coli LepB and the B. subtilis Sip proteins provide the bottleneck for export of YvaY in E. coli. Significant slower processing of preYvaY in absence of SecB indicated that SecB mediates targeting of the B. subtilis precursor.     

Signal peptidases recognize a structural feature at the cleavage site of secretory proteins

The cloning of the gene for staphylococcal nuclease A in the pIN-III-OmpA secretion vector results in a hybrid protein which is processed by signal peptidase I, yielding an active form of the nuclease that is secreted across the cytoplasmic membrane (Takahara, M., Hibler, D., Barr, P. J., Gerlt, J. A., and Inouye, M. (1985) J. Biol. Chem. 260, 2670-2674). Using oligonucleotide-directed site-specific mutagenesis, we have constructed a set of mutants at the cleavage site area of the precursor hybrid protein designed to alter progressively the predicted secondary structure of the cleavage site. Our results show that processing becomes increasingly defective as the turn probability decreases. These results are consistent with the structural requirement that we found for the processing of lipoprotein by signal peptidase II (Inouye, S., Duffaud, G., and Inouye, M. (1986) J. Biol. Chem. 261, 10970-10975). We conclude that secretory precursor proteins have a distinct secondary structural requirement at their cleavage site for processing by signal peptidase I, as well as by signal peptidase II.     

Stable periplasmic secretion intermediate in the general secretory pathway of Escherichia coli.

The secretion of the Klebsiella oxytoca cell surface lipoprotein pullulanase involves translocation across the cytoplasmic and outer membranes of the Gram-negative bacterial cell envelope. A variant of pullulanase was created by fusing the signal peptide-encoding 5' region of the Escherichia coli gene for periplasmic MalE protein to the 3' end of the pulA gene encoding almost the entire mature part of pullulanase. When produced in E. coli carrying the malE-pulA gene fusion on a high copy number plasmid and the complete set of genes specifically required for pullulanase secretion on a second plasmid, the hybrid protein differed from wild-type pullulanase as follows: (i) it was not fatty-acylated; (ii) it was apparently processed by LepB signal peptidase rather than by LspA lipoprotein signal peptidase; (iii) it was released into the periplasm and was only slowly transported across the outer membrane, and (iv) it was released directly into the medium rather than via the usual surface-anchored intermediate. The hybrid protein was secreted more rapidly when malE-pulA was expressed from a low copy number plasmid. The two steps in the secretion pathway could be totally uncoupled by expressing first the malE-pulA gene fusion and then the cognate secretion genes. These results show that fatty-acylation of wild-type PulA is not essential for secretion but may improve its efficiency when large amounts of the protein are produced, that the two steps in secretion can occur quite independently and that the periplasmic intermediate can persist for long periods under certain circumstances.     

Binding and degradation of heterodimeric substrates by ClpAP and ClpXP

ClpA and ClpX function both as molecular chaperones and as the regulatory components of ClpAP and ClpXP proteases, respectively. ClpA and ClpX bind substrate proteins through specific recognition signals, catalyze ATP-dependent protein unfolding of the substrate, and when in complexes with ClpP translocate the unfolded polypeptide into the cavity of the ClpP peptidase for degradation. To examine the mechanism of interaction of ClpAP with dimeric substrates, single round binding and degradation experiments were performed, revealing that ClpAP degraded both subunits of a RepA homodimer in one cycle of binding. Furthermore, ClpAP was able to degrade both protomers of a RepA heterodimer in which only one subunit contained the ClpA recognition signal. In contrast, ClpXP degraded both subunits of a dimeric substrate only when both protomers contained a recognition signal. These data suggest that ClpAP and ClpXP may recognize and bind substrates in significantly different ways.     

Isolation and analysis of eight exe genes and their involvement in extracellular protein secretion and outer membrane assembly in Aeromonas hydrophila.

The exeE gene of Aeromonas hydrophila has been shown to be required for the secretion of most if not all of the extracellular proteins produced by this bacterium. In addition, an exeE::Tn5-751 insertion mutant of A. hydrophila was found to be deficient in the amounts of a number of its major outer membrane proteins (B. Jiang and S. P. Howard, J. Bacteriol. 173:1241-1249, 1991). The exeE gene and the exeF gene were previously isolated as part of a fragment which complemented this mutant. In this study, we have isolated and sequenced a further eight exe genes, exeG through exeN, which constitute the 3' end of the exe operon. These genes have a high degree of similarity with the extracellular secretion operons of a number of different gram-negative bacteria. Marker exchange mutagenesis was used to insert kanamycin resistance cassettes into three different regions of the exe operon. The phenotypes of these mutants showed that in A. hydrophila this operon is required not only for extracellular protein secretion but also for normal assembly of the outer membrane, in particular with respect to the quantities of the major porins. Five of the Exe proteins contain type IV prepilin signal sequences, although the prepilin peptidase gene does not appear to form part of the exe operon. Limited processing of the ExeG protein was observed when it was expressed in Escherichia coli, and this processing was greatly accelerated in the presence of the prepilin peptidase of Pseudomonas aeruginosa.     

Outer membrane translocation of the extracellular enzyme pullulanase in Escherichia coli K12 does not require a fatty acylated N-terminal cysteine.

Site-directed mutagenesis was used to construct three mutant derivatives of the extracellular, cell surface lipoprotein pullulanase (PulA) in which the normally fatty acylated cysteine of the signal peptide-bearing precursor was replaced by other amino acids. When produced in Escherichia coli expressing all genes required for pullulanase secretion, approximately 90% of the PulA derivatives persisted as cell-associated precursors, indicating inefficient signal peptide processing. Processed (intermediate-sized) forms of the two derivatives that were studied in detail were found to result from proteolytic cleavage at different sites within the signal peptide. Both were further processed to smaller polypeptides by cleavage at an undetermined site that is presumably close to their C termini. The intermediate-sized pullulanase derived from prepullulanase in which Cys+1 had been replaced by Leu and Gly-1 by Glu (PulA:C1L/G-1E) appeared rapidly, was apparently entirely extracellular, and accounted for approximately 10% of synthesized PulA. Prolonged incubation did not result in further conversion of the precursor to the intermediate form, and the precursor remained anchored to the cytoplasmic membrane. The smaller processed form was also found extracellularly. The active form of the extracellular enzyme was monomeric, which is again in contrast to the fatty acylated, wild-type enzyme. Taken together, these results indicate that replacement of Cys+1 of prePulA eliminates processing by lipoprotein signal peptidase and does not permit processing by leader peptidase, but allows inefficient, aberrant processing by an unknown peptidase and immediate secretion of the resulting polypeptide, which retains most of its signal peptide. Processing and secretion only occur when the pullulanase secretion functions are expressed.     

An enzyme with type IV prepilin peptidase activity is required to process components of the general extracellular protein secretion pathway of Klebsiella oxytoca

The last gene (pulO) of the pulC-O pullulanase secretion gene operon of Klebsiella oxytoca codes for a protein that is 52% identical to the product of the pilD/xcpA gene required for extracellular protein secretion and type IV pilus biogenesis in Pseudomonas aeruginosa. The PilD/XcpA protein is known to remove the first six amino acids of the signal sequence of the type IV pilin precursor by cleaving after the glycine residue in the conserved sequence GF(M)XXXE (where X represents hydrophobic amino acids). This prepilin peptidase cleavage site is present in the products of four genes in the pulC-O operon (PulG, PulH, Pull and PulJ proteins). It is shown here that PulO processes the pulG gene product in vivo. Processing was maximal within 15 seconds, but experiments in which the expression of pulO was uncoupled from that of the other genes in the secretion operon suggest that processing can also occur post-translationally. The products of two pulG derivatives with internal inframe deletions were also processed by PulO, but the three PulG-PhoA hybrids, two PulJ-PhoA hybrids and the single PulH-PhoA hybrid tested did not appear to be processed. Sucrose gradient fraction experiments showed that both precursor and mature forms of PulG appear to be associated with low-density, outer membrane vesicles prepared by osmotic lysis of sphaeroplasts. Neither the xcpA gene nor the Bacillus subtilis gene comC, which is also homologous to pulO and codes for a protein with type IV prepilin peptidase activity, can correct the pullulanase secretion defect in an Escherichia coli strain carrying all of the genes required for secretion except pulO. Furthermore, neither XcpA nor ComC is able to process prePulG protein in vivo.     

Communication between ClpX and ClpP during substrate processing and degradation

In the ClpXP compartmental protease, ring hexamers of the AAA(+) ClpX ATPase bind, denature and then translocate protein substrates into the degradation chamber of the double-ring ClpP(14) peptidase. A key question is the extent to which functional communication between ClpX and ClpP occurs and is regulated during substrate processing. Here, we show that ClpX-ClpP affinity varies with the protein-processing task of ClpX and with the catalytic engagement of the active sites of ClpP. Functional communication between symmetry-mismatched ClpXP rings depends on the ATPase activity of ClpX and seems to be transmitted through structural changes in its IGF loops, which contact ClpP. A conserved arginine in the sensor II helix of ClpX links the nucleotide state of ClpX to the binding of ClpP and protein substrates. A simple model explains the observed relationships between ATP binding, ATP hydrolysis and functional interactions between ClpX, protein substrates and ClpP.     

An essential protease involved in bacterial cell-cycle control.

Proteolytic inactivation of key regulatory proteins is essential in eukaryotic cell-cycle control. We have identified a protease in the eubacterium Caulobacter crescentus that is indispensable for viability and cell-cycle progression, indicating that proteolysis is also involved in controlling the bacterial cell cycle. Mutants of Caulobacter that lack the ATP-dependent serine protease ClpXP are arrested in the cell cycle before the initiation of chromosome replication and are blocked in the cell division process. ClpXP is composed of two types of polypeptides, the ClpX ATPase and the ClpP peptidase. Site-directed mutagenesis of the catalytically active serine residue of ClpP confirmed that the proteolytic activity of ClpXP is essential. Analysis of mutants lacking ClpX or ClpP revealed that both proteins are required in vivo for the cell-cycle-dependent degradation of the regulatory protein CtrA. CtrA is a member of the response regulator family of two-component signal transduction systems and controls multiple cell-cycle processes in Caulobacter. In particular, CtrA negatively controls DNA replication and our findings suggest that specific degradation of the CtrA protein by the ClpXP protease contributes to G1-to-S transition in this organism.