State diagram of potato starch–water mixtures treated with high hydrostatic pressure

Potato starch–water mixture was treated with high hydrostatic pressure (HHP) of up to 1.2 GPa, and effect of starch content (10–70% (w/w)) on HHP-gelatinization was investigated by differential scanning calorimetry (DSC). Depending on the treatment pressure and potato starch content, DSC thermograms showed decrease in enthalpy change of heat gelatinization reflecting the progress of HHP-gelatinization and increase in enthalpy change of re-gelatinization of retrograded starch. From the viewpoint of the enthalpy changes, physically modified state of HHP-treated potato starch–water mixtures was classified as follows: no change, partial gelatinization, complete gelatinization, partial gelatinization and retrogradation, and complete gelatinization and retrogradation. A state diagram of potato starch–water mixtures (treatment pressure vs. starch content) was presented.     

Modification of maize starch by thermal processing in glacial acetic acid

Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) methods were used to determine if corn starch–glacial acetic acid mixtures can be melted and thermally processed at reasonable temperatures. DSC studies showed that the melting temperature of dry starch was reduced from about 280 to 180°C in the presence of >30% acetic acid. Glass transition temperatures varied from 110 to 40°C at 15 and 45% acetic acid, respectively. XRD showed the loss of native starch crystallinity and the formation of V-type complexes. Addition of 10% water decreased the melting temperatures to 140–150°C while addition of a base (sodium acetate) had little effect. Some possible applications of processing starch in glacial acetic acid will be discussed.     

Effect of cyclomaltoheptaose on amylose-lipid complexes during wheat-starch pasting

The V-type X-ray diffraction pattern associated with amylose-lipid complexes disappeared when an amylose-lysolecithin complex was heated in the presence of cyclomaltoheptaose. When cyclomaltoheptaose was added to wheat starch or an amylose-lysolecithin complex, the melting enthalpy of the amylose-lysolecithin complex was lessened. Turbidity measurements showed that cyclomaltoheptaose disrupted the amylose-lysolecithin complexes at temperatures above 65°. Using differential scanning calorimetry and turbidity measurements, a molar binding ratio for the cyclomaltoheptaose-lysolecithin complex of 3:1 was obtained. This complex appeared to dissociate over a temperature range of 33–37° in an excess of water.     

Effect of nixtamalization on the modification of the crystalline structure of maize starch

Endosperm of nixtamalized corn was analyzed using X-ray diffraction. Relative crystallinity changed with lime concentration and steeping. Diffractograms showed peaks corresponding to V-type crystalline structures, indicating formation of complexes during cooking and steeping. Diffraction patterns of the soluble fraction showed that complexed amylose can be leached out during solubilization. While diffraction patterns of the insoluble fraction suggested that some of the formed complexes remain in this fraction. During alkali steeping, release of amylose is strongly inhibited as indicated by the pronounced decrease in the starch–I₂ absorbance of the lime treated samples compared to the lime-free treated sample. This decrease is interpreted as evidence of starch cross-linking during the nixtamalization process. Differences in starch–I₂ absorbance and in X-ray diffraction patterns of the soluble fractions suggested that lime treatment could also modified formation of amylose complexes with lipids.     

Comparison of methods to determine the degree of gelatinisation for both high and low starch concentrations

A general procedure was developed to measure the degree of gelatinisation in samples over a broad concentration range. Measurements based on birefringence, DSC (Differential scanning calorimetry), X-ray and amylose–iodine complex formation were used. If a 10 w/w % wheat starch–water mixture was used, each method resulted in approximately the same degree of gelatinisation vs. temperature curve. In case the gelatinisation of a 60 w/w % wheat starch–water mixture was followed as a function of the temperature, each method resulted in a different degree of gelatinisation vs. temperature curve. DSC and X-ray measurements are preferred, because they can be used to determine when the final stage of the gelatinisation process has been completed. Birefringence and amylose–iodine complex formation measurements are suitable alternatives if DSC and X-ray equipment is not available, but will lead to different results. The differences between the methods can be explained by considering the phenomena that take place during the gelatinisation at limiting water conditions.

Based on the experimental data obtained with DSC and X-ray measurements, the gelatinisation of 10 w/w % and 60 w/w % wheat starch–water mixtures started at the same temperature (approximately 50 °C). However, complete gelatinisation was reached at different temperatures (approximately 75 °C and 115 °C for, respectively, 10 w/w % and 60 w/w % wheat starch–water mixtures) according to the experimental DSC and X-ray data. These results are in accordance with independent DSC measurements that were carried out.

The Flory equation was adapted to provide a quantitative explanation for the curves describing the degree of starch gelatinisation as a function of the starch–water ratio and the temperature. The gelatinisation curves that were obtained with the model are in good agreement with the experimentally determined curves. The parameters , ΔH_u and χ₁₂ that resulted in the lowest sum of the squared residuals are 291 ± 63 °C, 29.2 ± 3.9 kJ/mol and 0.53 ± 0.05 (95% confidence interval). These values agree with other values reported in literature.     

Effect of the Oxidation of Free Fatty Acids on the Interfacial Adsorptivity of Lysophosphatidylcholine/Free Fatty Acid/Ovalbumin Complexes

The effect of the oxidation of linoleic acid on the interfacial adsorptivity of lysophosphatidylcholine (LPC)/free fatty acid (FFA)/ovalbumin (OA) complexes was investigated by ³¹P-NMR. The interfacial adsorptivity of the complexes was evaluated by the mean droplet size, phosphorus signal and relaxation time of an emulsion composed of each complex. The interfacial adsorptivity of the LPC/FFA/OA complexes became lower with the oxidation of linoleic acid, which formed a complex with LPC and OA. Reduction of the T₂ relaxation time and peak broadening of Ser-P⁶⁸ for OA correlated well with the formation of fine emulsions from an LPC/linoleic acid/OA complex. The bilayer vesicles composed of LPC and linoleic acid with a low POV value were destroyed by coupling with protein and show high interfacial adsorptivity. On the other hand, the vesicles composed of LPC and linoleic acid with a high POV value remained in liposome and show low interfacial adsorptivity. These results suggest that the affinity of bilayer vesicles composed of LPC and FFA mainly promoted the interfacial adsorption of an LPC/FFA/OA complex, and that the region of Ser-P⁶⁸ in OA was adsorbed at the interface when the complex formed a fine emulsion.     

The plasticizing effect of alginate on the thermoplastic starch/glycerin blends

Corn starch and corn starch–alginate (5–15%) blends plasticized with 35% glycerin were prepared, water was intentionally excluded from the formulations. Torque rheometry measurements were carried out during the processing of the blends in a batch counterrotating twin screw mixer. A progressive decrease in the plasticization energy of the blends was observed as the alginate content was increased, with a 5-fold decrease for the blend with the higher alginate content (15%). The steady state torque of the plasticized melted blends also showed a decrease as alginate content was increased; with a drastic drop occurring for the formulation with higher alginate content. After mixing, test specimens for mechanical, thermal and microstructural testing were made by compression molding. A decrease in the elastic properties and an increase in elongation at break and impact resistance was observed when alginate content was increased in the blends. The transition of the materials towards a more viscous behavior, as alginate content was increased, was confirmed by differential scan calorimetric analysis. For the corn starch–alginate blends glass transitions were detected in the temperature range −60 to −90 °C. Scanning electron microscopy was used to examine the morphology of cryofractured surfaces of the molded test specimens. A reduction of the granular crystalline structures typical of corn starch was observed as alginate content was increased in the blends. The experimental evidence presented in this work indicates that, when water is excluded from thermoplastic corn starch preparation, alginate acts synergistically with glycerin increasing the degree and efficiency of the plasticization process.     

Spherulitic crystallization of gelatinized maize starch and its fractions

Binary systems of polymers often display spherulitic morphologies after cooling from the melt, but these phenomena have rarely been reported among food polymers of native-size. Here we report the observation of spherulitic and other morphologies in gelatinized maize starch. The morphology could be manipulated by choosing polymer compositions and kinetic regimes. Spherulites (10 μm diameter) formed from gelatinized high-amylose maize starches and purified amylose at cooling rates of order of magnitude 100 °C/min. They were more numerous and exhibited a higher melting point the greater the ratio of amylose to amylopectin. Rapid cooling rates (150–500 °C/min) resulted in a more even distribution of smaller spherulites. Very rapid (liquid nitrogen quench) or slow (0.1–1 °C/min) cooling rates resulted in mixed morphology, as did addition of 15 or 60% (w/w) sucrose to a 10% (w/w) dispersion of high-amylose starch (HAS). Spherulites were observed in aqueous suspensions of high-amylose maize starch between 5 and 30% (w/w). Lower starch concentrations resulted in a broader size distribution and spherulites of more distinct shape. WAXS patterns of B-type were observed. Negatively birefringent spherulites predominated, but positive spherulites were found. The spherulite melting range overlapped with that for amylose–lipid complex. Evidence indicated that micro-phase separation takes place when a holding period at 95 °C follows gelatinization at 180 °C. Despite the high maximum temperature of treatment (180 °C) there was evidence for a memory effect in samples of 30% HAS. Spherulite morphology closely resembled that of native starch granules in very early stages of development.     

Novel homodimer model of the β-adrenergic receptor in complex with free fatty acids and cholesterol: first-principles calculation studies

We propose a theoretical novel homodimer model of the β- adrenergic receptor (βAR) in complex with a heterogeneous mixture of free fatty acids (FFAs) and cholesterol based on first-principles calculations. We used the density-functional-based tight binding with dispersion (DFTB-D) method, which accurately evaluates van der Waals interactions between FFAs and amino acid residues in the receptor. The calculations suggest that a stable homodimer of bAR can form a complex with FFAs and cholesterol by extensive van der Waals interactions in the cell membrane, and that the heterogeneous composition of the FFAs is important for the stability of the homodimer complex. The stable van der Waals interactions propagate from one of the bAR to the other through the cholesterol and FFAs in the homodimer complex. The energy propagation in the complex has the potential to enhance molecular signaling in adipocytes, because the stability of the complex can influence anti-adiposity effects after oral treatment of the FFA components.     

Starch modification by iterated syneresis

Potato, tapioca, corn and wheat starches were solubilised in water and isolated from the solution by iterated syneresis and the effect of this physical modification on the physicochemical properties and structure was studied. The experimental starches were examined by chemical analysis, the Brabender rheological method, scanning electron or light microscopy, X-ray diffractometry, infrared spectroscopy, and differential scanning calorimetry. Physical modification was evidenced to the change starch–water interaction and the structure of starches. Pasting temperature shifted to lower values and the gelatinisation mechanism changed. All modified starches had a B-type of X-ray diffraction pattern. The melting temperature of starch crystallites was typical of retrograded starch, but the enthalpy change was higher. The correlation between the resistant starch content of modified starches and their crystal structure was discussed together with the thermal properties.     

Whey for mass production of Beauveria bassiana and Metarhizium anisopliae

Spore production of Beauveria bassiana and Metarhizium anisopliae was studied in a novel whey-based culture media. Spore yield and viability were determined for two B. bassiana (GHA-726 and CA-603) and two M. anisopliae (CA-1 and IMI 330189) isolates following production in three whey-based systems: solid, liquid, and a diphasic production system. Our study indicated that whey permeate can be used effectively for production of spores of entomopathogenic fungi. However, spore yield and viability were significantly influenced by fungal isolate, whey concentration, and the type of production process used. Under the conditions defined in the present study, spore yields ranging from 1.3 × 10⁹–10 × 10¹¹ spores l⁻¹ of whey medium could be obtained depending on the strain and production process used. Our study revealed that spores produced by all strains in whey-based solid and liquid media showed between 73–99 % viability; germination rates were comparable with those obtained using the standard SDA medium. In the two-stage production process, the viabilities of conidia produced by GHA-726, CA-603, and CA-1 were 35–86, 32–98, and 6–29 %, respectively; viability was correlated with whey concentration and isolates. Whey permeate can be used as a growth substrate for mass production of biocontrol fungi. We hypothesize that spore yield and viability could be improved by careful selection of whey content in the medium, incorporation of critical additives and optimization of culture conditions.     

Reassessment of Brain Free Fatty Acid Liberation During Global Ischemia and Its Attenuation by Barbiturate Anesthesia

Abstract: We previously reported that whole-brain free fatty acids (FFA) rose almost linearly for up to 1 h after decapitation of unanesthetized rats and was significantly attenuated by pentobarbital anesthesia. However, our values for total FFA and arachidonic, stearic, oleic, and palmitic acids were severalfold higher than those obtained by previous investigators. Based upon the suggestion that this may be due to FFAs released from di- and triglycerides in the quantitation of FFAs, we have now analyzed and improved our procedures for TLC separation of FFA and reassessed the accumulation of FFA in whole brain during decapitation ischemia in unanesthetized and pentobarbital-anesthetized rats. FFA levels in whole brain after 0.5 min of ischemia were one-half to one- fourth the levels previously reported after 1 min of ischemia. The rise in FFA between 0.5 and 60 min of ischemia was 9-fold for total FFA, and between 7 and 12-fold for each of the FFAs quantitated. Pentobarbital significantly attenuated the rise of all FFAs with, however, greater effects on oleic and palmitic acids than previously reported.     

Intakes of whey protein hydrolysate and whole whey proteins are discriminated by LC–MS metabolomics

Whey protein improves fasting lipids and insulin response in overweight and obese individuals. Whey hydrolysate was recently shown to be more active than whole protein but the differences in metabolite profiles after intake remain unknown. This study discriminates plasma profiles after intake of four different whey protein fractions and establishes new hypotheses for the observed effects. Obese, non-diabetic subjects were included in the randomized, blinded, cross-over meal study. Subjects ingested a high-fat meal containing whey isolate (WI), whey concentrate hydrolysate (WH), α-lactalbumin or caseinoglycomacropeptide as the protein source. Plasma samples were collected at five time points and metabolites analysed using LC–Q-TOF–MS. Plasma concentrations of ten amino acids (AAs) were different between the meals. The plasma levels of AAs and AA derivatives were generally directly related to the AA composition of the meals. Highly elevated plasma levels of a number of cyclic dipeptides and other AA metabolites were found following intake of the WH meal and these metabolites are primary candidates to explain the superior insulinotropic effect of WH. The manufacturing process of WH caused oxidization of methionine to methionine sulfoxide which in turn caused in vivo generation of N-phenylacetyl-methionine and N-phenylacetyl-methionine sulfoxide. These two compounds have not previously been described in biological systems.     

Solid state NMR studies on the structural and conformational properties of natural maize starches

Natural maize starches having a range of amylose contents have been characterised by CP/MAS NMR spectroscopy. Chemical shifts, relative resonance intensities, line-widths and spectral shapes were compared at different moisture contents. At 10% moisture content, these parameters showed few significant differences across a range of apparent amylose levels from 0 to 84%. After hydration of the granules to ≈30% moisture, it was found that the amylose content significantly affected the relative signal intensities and line-widths especially of C-1 and C-4 resonances. Narrower line-widths after hydration were attributed to (i) an increased degree of crystallinity, and (ii) disappearance of the signals of amorphous material which, on becoming more mobile, became invisible to the CP/MAS experiment. The enhanced resolution at higher moisture levels revealed signals which were assigned to the amylose–lipid complex, i.e. V-type amylose. The amount of V-amylose detected by NMR increased with both amylose content and lipid content of the granule. Prolonged treatment of the granules with iodine vapour significantly increased the amount of V-type amylose in the high amylose samples, but caused a decrease in their degree of crystallinity. Waxy-maize starch was barely affected by iodination. The results provide evidence that amylose tends to disrupt the structural order within amylopectin crystallities. This effect is enhanced by the formation of the amylose–iodine complex, indicating that V-amylose could be a major crystallite-disrupting agent in native starch granules.     

Effects of acid hydrolysis and defatting on crystallinity and pasting properties of freeze-thawed high amylose corn starch

Paste of defatted and/or mildly acid-hydrolyzed high amylose corn starch was freeze-thawed, and then the starch was isolated by vacuum drying for the analysis in crystallization and pasting properties. X-ray diffraction pattern and differential scanning calorimetric analysis showed that the crystallinity of the freeze-thawed starch was increased as the degree of hydrolysis increased. The diffraction pattern revealed B- and V-crystals with patterns with diffraction peaks at 17, 20, and 23–25° (2θ), which were developed by amylose recrystallization during the freeze-thawing. The crystal melting enthalpies, for dual endothermic transitions above 100 °C, which resulted from the melting of amylose–lipids complex and amylose double helices were raised by the treatment. The isolated and dried starch formed a paste by aqueous heating under the ambient pressure, and its paste viscogram exhibited substantially higher resistance to shear-thinning, and rapid setback upon cooling. Acid hydrolysis, however, reduced overall paste viscosity, possibly due to the increased crystallinity. Enzyme-resistant starch content in the acid hydrolyzed starch was increased by the freeze-thawing, but not by acid hydrolysis. It was slightly increased by defatting.     

Characterisation of whey proteins of camel (Camelus dromedarius) milk and colostrum

Variation in the composition of whey proteins from camel (Camelus dromedarius) colostrum and milk was recorded over a 192 h period following parturition. Whey proteins were separated by cation-exchange fast protein liquid chromatography and identified by polyacrylamide gel electrophoresis. The main components of whey proteins in camel milk and colostrum were similar to that in bovine, except for the lack in β-lactoglobulin. Serum albumin was the major whey protein present in camel milk, with an average concentration of 10.8 g/l. Camel colostrum was rich in immunoglobulins G, which consist of IgG1, and the enzyme inhibitory antibodies IgG2 and IgG3. The concentration of these proteins decreased rapidly 48 h post partum. Lactophorin (proteose peptone-component 3) and basic whey protein were detected only within 48 h after parturition, reaching a level of 4.9 and 3.1 g/l at 192 h post partum, respectively. The maximum level of lactoferrin (2.3 g/l) was observed at 48 h after parturition. Camel milk and colostrum were shown to be rich in protective proteins, especially IgG2 and IgG3, which revealed to be a potential source of inhibitory antibodies.     

Rheology of starch–clay nanocomposites

The effects of incorporating various montmorillonite nanoclays into wheat, potato, corn, and waxy corn starch samples were examined by rheology and X-ray diffraction. The nanoclays included the hydrophilic Cloisite Na+ clay as well as the more hydrophobic Cloisite 30B, 10A, and 15A clays. Frequency sweep and creep results for wheat starch–nanoclay samples at room temperature indicated that the Cloisite Na+ samples formed more gel-like materials than the other nanoclay samples. X-ray diffraction results showed no intercalation of Cloisite Na+ clays at room temperature, suggesting that starch granules interacted only with the clay surface and not the interlayer. When the various wheat starch–nanoclay samples were heated to 95 °C, the Cloisite Na+ samples exhibited a large increase in modulus. In contrast, the more hydrophobic nanoclay samples had comparable modulus values to the neat starch sample. These results suggested that during gelatinization, the leached amylose interacted with the Cloisite Na+ interlayer, producing better reinforcement and higher modulus values. X-ray diffraction results supported this interpretation since the data showed greater intercalation of Cloisite Na+ clay in the gelatinized samples. The samples containing wheat and corn starch showed comparable elastic modulus values during gelatinization. However, the potato and waxy corn samples had modulus values that rapidly decreased at higher temperatures.     

Contribution of response surface design to the development of glycerolysis systems catalyzed by commercial immobilized lipases

Two commercial immobilized lipases (“Lipozyme® IM” and “Novozym® 435”) were tested as biocatalysts for the glycerolysis of olive residue oil in n-hexane aimed at the production of monoglycerides (MG) and diglycerides (DG). A central composite rotatable design (CCRD) was followed to model and optimize glycerolysis as a function of both the amount of biocatalyst (L) and of the molar ratio glycerol/triglycerides (Gly/TG). For both biocatalysts, the production of free fatty acids (FFA) was described by second order models. In terms of MG and DG production, as well as of TG conversion, the best fits were obtained with first-order models. The highest MG productions were in the range 43–45% (w/w, on the basis of total fat) for both biocatalysts tested at a (Gly/TG) ratio of one. In the case of “Novozym 435”, the lowest load used (12%, w/w) gave the best results, in contrast with “Lipozyme IM” with which a concentration of about 26% (w/w) was necessary to obtain the highest production. Under these conditions, the amount of FFA produced was about 2% and 10% (w/w), respectively, for “Novozym 435” and “Lipozyme IM” catalyzed systems. Considering both FFA production and lipase loading, “Novozym 435” was shown to be a better biocatalyst for the glycerolysis of olive residue oil in n-hexane, aimed at the production of MG, than “Lipozyme IM”.     

Preparation of fatty acid methyl esters for gas-liquid chromatography

A convenient method using commercial aqueous concentrated HCl (conc. HCl; 35%, w/w) as an acid catalyst was developed for preparation of fatty acid methyl esters (FAMEs) from sterol esters, triacylglycerols, phospholipids, and FFAs for gas-liquid chromatography (GC). An 8% (w/v) solution of HCl in methanol/water (85:15, v/v) was prepared by diluting 9.7 ml of conc. HCl with 41.5 ml of methanol. Toluene (0.2 ml), methanol (1.5 ml), and the 8% HCl solution (0.3 ml) were added sequentially to the lipid sample. The final HCl concentration was 1.2% (w/v). This solution (2 ml) was incubated at 45°C overnight or heated at 100°C for 1–1.5 h. The amount of FFA formed in the presence of water derived from conc. HCl was estimated to be <1.4%. The yields of FAMEs were >96% for the above lipid classes and were the same as or better than those obtained by saponification/methylation or by acid-catalyzed methanolysis/methylation using commercial anhydrous HCl/methanol. The method developed here could be successfully applied to fatty acid analysis of various lipid samples, including fish oils, vegetable oils, and blood lipids by GC.