Identification of Quantitative Trait Loci for Grain Appearance and Milling Quality Using a Doubled-Haploid Rice Population

Improving grain quality, which is composed primarily of the appearance of the grain and its cooking and milling attributes, is a major objective of many rice-producing areas in China. In the present study, we conducted a marker-based genetic analysis of the appearance and milling quality of rice （Oryza sativa L.） grains using a doubled-haploid population derived from a cross between the indica inbred Zhenshan 97 strain and the japonica inbred Wuyujing 2 strain. Quantitative trait locus （QTL） analysis using a mixed linear model approach revealed that the traits investigated were affected by one to seven QTLs that individually explained 4.0%-30.7% of the phenotypic variation. Cumulatively, the QTL for each trait explained from 12.9% to 61.4% of the phenotypic variation. Some QTLs tended to have a pleiotropic or location-linked association as a cause of the observed phenotypic correlations between different traits. Improvement of the characteristics of grain appearance and grain weight, as well as an improvement in the milling quality of rice grains, would be expected by a recombination of different QTLs using marker-assisted selection.     

Genetic and physiological architecture of early vigor in Aegilops tauschii, the D-genome donor of hexaploid wheat. A quantitative trait loci analysis

Plant growth can be studied at different organizational levels, varying from cell, leaf, and shoot to the whole plant. The early growth of seedlings is important for the plant's establishment and its eventual success. Wheat (Triticum aestivum, genome AABBDD) seedlings exhibit a low early growth rate or early vigor. The germplasm of wheat is limited. Wild relatives constitute a source of genetic variation. We explored the physiological and genetic relationships among a range of early vigor traits in Aegilops tauschii, the D-genome donor. A genetic map was constructed with amplified fragment-length polymorphism and simple sequence repeat markers, and quantitative trait loci (QTL) analysis was performed on the F(4) population of recombinant inbred lines derived from a cross between contrasting accessions. The genetic map consisted of 10 linkage groups, which were assigned to the seven chromosomes and covered 68% of the D genome. QTL analysis revealed 87 mapped QTLs (log of the odds >2.65) in clusters, 3.1 QTLs per trait, explaining 32% of the phenotypic variance. Chromosomes 1D, 4D, and 7D harbored QTLs for relative growth rate, biomass allocation, specific leaf area, leaf area ratio, and unit leaf rate. Chromosome 2D covered QTLs for rate and duration of leaf elongation, cell production rate, and cell length. Chromosome 5D harbored QTLs for the total leaf mass and area and growth rate of the number of leaves and tillers. The results show that several physiological correlations between growth traits have a genetic basis. Genetic links between traits are not absolute, opening perspectives for identification of favorable alleles in A. tauschii to improve early vigor in wheat.     

Genetic Identification of Quantitative Trait Loci for Contents of Mineral Nutrients in Rice Grain

In present study, Fe, Zn, Mn, Cu, Ca, Mg, P and K contents of 85 Introgression linee (ILs) derived from a cross between an elite indica cultivar Teqing and the wild rice (Oryza rufipogon) were measured by inductively coupled argon plasma (ICAP) spectrometry. Substantial variation was observed for all traits and most of the mineral elements were significantly positive correlated or independent except for Fe with Cu. A total of 31 putative quantitative trait loci (QTLs) were detected for these eight mineral elements by single point analysis. Wild rice (O. rufipogon) contributed favorable alleles for most of the QTLs (26 QTLs), and chromosomes 1, 9 and 12 exhibited 14 QTLs (45%) for these traits. One major effect of QTL for zinc content accounted for the largest proportion of phenotypic variation (11%-19%) was detected near the simple sequence repeats marker RM152 on chromosome 8. The co-locations of QTLs for some mineral elements observed in this mapping population suggested the relationship was at a molecular level among these traits and could be helpful for simultaneous improvement of these traits in rice grain by marker assisted selection.     

Quantitative trait loci conferring grain mineral nutrient concentrations in durum wheat × wild emmer wheat RIL population

Mineral nutrient malnutrition, and particularly deficiency in zinc and iron, afflicts over 3 billion people worldwide. Wild emmer wheat, Triticum turgidum ssp. dicoccoides, genepool harbors a rich allelic repertoire for mineral nutrients in the grain. The genetic and physiological basis of grain protein, micronutrients (zinc, iron, copper and manganese) and macronutrients (calcium, magnesium, potassium, phosphorus and sulfur) concentration was studied in tetraploid wheat population of 152 recombinant inbred lines (RILs), derived from a cross between durum wheat (cv. Langdon) and wild emmer (accession G18-16). Wide genetic variation was found among the RILs for all grain minerals, with considerable transgressive effect. A total of 82 QTLs were mapped for 10 minerals with LOD score range of 3.2–16.7. Most QTLs were in favor of the wild allele (50 QTLs). Fourteen pairs of QTLs for the same trait were mapped to seemingly homoeologous positions, reflecting synteny between the A and B genomes. Significant positive correlation was found between grain protein concentration (GPC), Zn, Fe and Cu, which was supported by significant overlap between the respective QTLs, suggesting common physiological and/or genetic factors controlling the concentrations of these mineral nutrients. Few genomic regions (chromosomes 2A, 5A, 6B and 7A) were found to harbor clusters of QTLs for GPC and other nutrients. These identified QTLs may facilitate the use of wild alleles for improving grain nutritional quality of elite wheat cultivars, especially in terms of protein, Zn and Fe.     

亚麻主要农艺与品质相关性状的QTL定位

为了全面了解亚麻产量和品质相关性状的遗传基础,为亚麻基因克隆和分子标记辅助育种提供理论依据,在已构建SNP连锁遗传图谱的基础上,以LH-89为父本,R43为母本构建F2:3家系QTL定位群体,用R/QTL软件采用复合区间作图法对13个农艺和品质性状进行QTL定位。结果表明:(1)该研究共检测出35个QTL位点,与粗脂肪及其组成成分相关的QTL有20个,与农艺性状相关的QTL有15个;其中:亚油酸和粗脂肪各5个,亚麻酸、千粒重各4个,棕榈酸、株高、工艺长度各3个,硬脂酸、分枝数各2个,单株果数、果粒数、单株粒重、油酸各1个。(2)共有18个QTL的表型贡献率超10%(主效基因),其中农艺性状定位8个主效基因,品质性状定位10个主效基因。     

Mapping of ionomic traits in Mimulus guttatus reveals Mo and Cd QTLs that colocalize with MOT1 homologues

Natural variation in the regulation of the accumulation of mineral nutrients and trace elements in plant tissues is crucial to plant metabolism, development, and survival across different habitats. Studies of the genetic basis of natural variation in nutrient metabolism have been facilitated by the development of ionomics. Ionomics is a functional genomic approach for the identification of the genes and gene networks that regulate the elemental composition, or ionome, of an organism. In this study, we evaluated the genetic basis of divergence in elemental composition between an inland annual and a coastal perennial accession of Mimulus guttatus using a recombinant inbred line (RIL) mapping population. Out of 20 elements evaluated, Mo and Cd were the most divergent in accumulation between the two accessions and were highly genetically correlated in the RILs across two replicated experiments. We discovered two major quantitative trait loci (QTL) for Mo accumulation, the largest of which consistently colocalized with a QTL for Cd accumulation. Interestingly, both Mo QTLs also colocalized with the two M. guttatus homologues of MOT1, the only known plant transporter to be involved in natural variation in molybdate uptake.     

Mapping quantitative trait loci associated with arsenic accumulation in rice (Oryza sativa)

The quantitative trait loci (QTLs) associated with arsenic (As) accumulation in rice were mapped using a doubled haploid population established by anther culture of F1 plants from a cross between a Japonica cultivar CJ06 and an Indica cultivar TN1 (Oryza sativa). Four QTLs for arsenic (As) concentrations were detected in the map. At the seedling stage, one QTL was mapped on chromosome 2 for As concentrations in shoots with 24.4% phenotypic variance and one QTL for As concentrations in roots was detected on chromosome 3. At maturity, two QTLs for As concentrations in grains were found on chromosomes 6 and 8, with 26.3 and 35.2% phenotypic variance, respectively. No common loci were detected among these three traits. Interestingly, the QTL on chromosome 8 was found to be colocated for As concentrations in grain at maturity and shoot phosphorus (P) concentrations at seedling stage. These results provide an insight into the genetic basis of As uptake and accumulation in rice, and will be useful in identifying genes associated with As accumulation.     

Anthesis date mainly explained correlations between post-anthesis leaf senescence, grain yield, and grain protein concentration in a winter wheat population segregating for flowering time QTLs

The genetic variability of the duration of leaf senescence during grain filling has been shown to affect both carbon and nitrogen acquisition. In particular, maintaining green leaves during grain filling possibly leads to increased grain yield, but its associated effect on grain protein concentration has not been studied. The aim of this study was to dissect the genetic factors contributing to correlations observed at the phenotypic level between leaf senescence during grain filling, grain protein concentration, and grain yield in winter wheat. With this aim in view, an analysis of quantitative trait locus (QTL) co-locations for these traits was carried out on a doubled haploid mapping population grown in a large multienvironment trial network. Pleiotropic QTLs affecting leaf senescence and grain yield and/or grain protein concentration were identified on chromosomes 2D, 2A, and 7D. These were associated with QTLs for anthesis date, showing that the phenotypic correlations with leaf senescence were mainly explained by flowering time in this wheat population. Study of the allelic effects of these pleiotropic QTLs showed that delaying leaf senescence was associated with increased grain yield or grain protein concentration depending on the environments considered. It is proposed that this differential effect of delaying leaf senescence on grain yield and grain protein concentration might be related to the nitrogen availability during the post-anthesis period. It is concluded that the benefit of using leaf senescence as a selection criterion to improve grain protein concentration in wheat cultivars may be limited and would largely depend on the targeted environments, particularly on their nitrogen availability during the post-anthesis period.     

利用双单倍体群体剖析水稻产量及其相关性状的遗传基础

主效QTL、上位性效应和它们与环境的互作(QE)都是数量性状的重要遗传因素。利用籼粳交珍汕97／武育粳2号F1植株上的花药进行组织培养得到的190个双单倍体群体和179个微卫星标记,通过两年两重复田间试验,采用混合线性模型方法分析了9个控制水稻产量及其相关性状的遗传效应,得到57个主效QTL,41对上位性互作,8对QTL与环境的互作和7对上位性效应与环境的互作。单个主效QTL解释这些性状1．3％～25．8％的表型方差。各性状QTL的累积表型贡献率达11．5％～66．8％。大多数性状之间具有显著的表型相关性,相关性较高的性状之间常具有较多共同或紧密连锁的QTL。结果表明,基因的多效性或紧密连锁可能是性状相关的重要遗传基础。     

Mapping Quantitative Trait Loci for Grain Appearance Traits of Rice Using a Recombinant Inbred Line Population

A linkage map consisting of 221 markers was constructed based on a recombinant inbred line (RIL) population from the cross between Zhenshan 97 and Minghui 63. Quantitative trait loci (QTL) mapping was carried out for grain appearance traits such as grain length, grain width and grain shape in rice in 1998 and 1999. Based on interval mapping method at the threshold LOD≥2.4, six, two and two QTLs were detected for grain length, grain width and grain shape, respectively, in 1998; In 1999, three, two and two QTLs were identified for the three traits, respectively. Of them, seven QTLs were simultaneously identified in both of the years. The QTL with large effects located in the interval RG393-C1087 on chromosome 3 not only controlled the grain length, but also influenced the grain shape. It explained 57.5%, 61.4% and 26.7%, 29.9% of phenotypic variation of the grain length and the grain shape in two years, respectively. The QTL with large effects located in the interval RG360-C734B on chromosome 5 affected the grain width and the grain shape. It explained 44.2%, 53.2% and 32.1%, 36.0% of phenotypic variation of the grain width and the shape in two years, respectively. Eight, five and five QTLs were identified for the grain length, width and shape, respectively, based on mixed linear-model composite interval mapping method at P =0.005. Their general contributions were 58.81%, 44.75%, and 57.47%. One QTL for the grain length was found to be significant interaction with environment.     

Quantitative trait loci for lodging resistance in a segregating wheat×spelt population

 Lodging can strongly affect both the grain yield and the quality of wheat. Lodging represents a quantitative trait and is difficult to assess on a phenotypic basis. Marker-assisted selection (MAS) could therefore become an important tool in breeding for lodging resistance. In this study, we mapped and characterised quantitative trait loci (QTLs) for lodging resistance, as well as morphological traits correlated with lodging, in a segregating population of 226 recombinant inbred lines derived from the cross of the lodging-resistant wheat variety Forno with the susceptible spelt variety Oberkulmer. Lodging, plant height, leaf width, leaf-growth habit, culm stiffness, culm swinging, culm thickness, days to ear emergence and days to flowering were assessed in field trials at two locations in 1996 and at one location in 1997. Additionally, at one location weight and length parameters were also assessed. Plant height and culm stiffness explained 77% of the phenotypic variance of lodging in a multiple regression model over all three environments. QTL analysis of lodging and morphological parameters was based on a genetic map containing 230 loci with 23 linkage groups (2469 cM). With the method of composite interval mapping nine QTLs for lodging resistance were detected, explaining 63% of the phenotypic variance in a simultaneous fit. Seven of these QTLs coincided with QTLs for morphological traits, reflecting the correlations between these traits and lodging. In our population the most efficient way to improve lodging resistance would be by a combination of indirect selection on plant height and culm stiffness together with MAS on the two QTLs for lodging resistance which did not coincide with QTLs for morphological traits. Received: 3 August 1998 / Accepted: 28 November 1998     

Genetic analysis of grain protein-content,grain yield and thousand-kernel weight in bread wheat

Grain yield and grain protein content are two very important traits in bread wheat. They are controlled by genetic factors, but environmental conditions considerably affect their expression. The aim of this study was to determine the genetic basis of these two traits by analysis of a segregating population of 194 F(7) recombinant inbred lines derived from a cross between two wheat varieties, grown at six locations in France in 1999. A genetic map of 254 loci was constructed, covering about 75% of the bread wheat genome. QTLs were detected for grain protein-content (GPC), yield and thousand-kernel weight (TKW). 'Stable' QTLs (i.e. detected in at least four of the six locations) were identified for grain protein-content on chromosomes 2A, 3A, 4D and 7D, each explaining about 10% of the phenotypic variation of GPC. For yield, only one important QTL was found on chromosome 7D, explaining up to 15.7% of the phenotypic variation. For TKW, three QTLs were detected on chromosomes 2B, 5B and 7A for all environments. No negative relationships between QTLs for yield and GPC were observed. Factorial Regression on GxE interaction allowed determination of some genetic regions involved in the differential reaction of genotypes to specific climatic factors, such as mean temperature and the number of days with a maximum temperature above 25 degrees C during grain filling.     

Mapping quantitative trait loci controlling agronomic traits in the spring wheat cross RL4452x'AC Domain'.

Relatively little is known about the genetic control of agronomic traits in common wheat (Triticum aestivum L.) compared with traits that follow Mendelian segregation patterns. A doubled-haploid population was generated from the cross RL4452x'AC Domain' to study the inheritance of the agronomic traits: plant height, time to maturity, lodging, grain yield, test weight, and 1000-grain weight. This cross includes the genetics of 2 western Canadian wheat marketing classes. Composite interval mapping was conducted with a microsatellite linkage map, incorporating 369 loci, and phenotypic data from multiple Manitoba environments. The plant height quantitative trait loci (QTLs), QHt.crc-4B and QHt.crc-4D, mapped to the expected locations of Rht-B1 and Rht-D1. These QTLs were responsible for most of the variation in plant height and were associated with other agronomic traits. An additional 25 agronomic QTLs were detected in the RL4452x'AC Domain' population beyond those associated with QHt.crc-4B and QHt.crc-4D. 'AC Domain' contributed 4 alleles for early maturity, including a major time to maturity QTL on 7D. RL4452 contributed 2 major alleles for increased grain yield at QYld.crc-2B and QYld.crc-4A, which are potential targets for marker-assisted selection. A key test weight QTL was detected on 3B and prominent 1000-grain weight QTLs were identified on 3D and 4A.     

Experimental designs and statistical methods for mapping quantitative trait loci underlying triploid endosperm traits without maternal genetic variation

Many endosperm traits are related to grain quality in cereal crops. Endosperm traits are mainly controlled by the endosperm genome but may be affected by the maternal genome. Studies have shown that maternal genotypic variation could greatly influence the estimation of the direct effects of quantitative trait loci (QTLs) underlying endosperm traits. In this paper, we propose methods of interval mapping of endosperm QTLs using seeds of F2 or BC1 (an equal mixture of F1 x P1 and F1 x P2 with F1 as the female parent) derived from a cross between 2 pure lines (P1 x P2). The most significant advantage of our experimental designs is that the maternal effects do not contribute to the genetic variation of endosperm traits and therefore the direct effects of endosperm QTLs can be estimated without the influence of maternal effects. In addition, the experimental designs can greatly reduce environmental variation because a few F1 plants grown in a small block of field will produce sufficient F2 or BC1 seeds for endosperm QTL analysis. Simulation studies show that the methods can efficiently detect endosperm QTLs and unbiasedly estimate their positions and effects. The BC1 design is better than the F2 design.     

Mapping of post-flowering drought resistance traits in grain sorghum: association between QTLs influencing premature senescence and maturity

The identification of genetic factors underlying the complex responses of plants to drought stress provides a solid basis for improving drought resistance. The stay-green character in sorghum (Sorghum bicolor L. Moench) is a post-flowering drought resistance trait, which makes plants resistant to premature senescence under drought stress during the grainfilling stage. The objective of this study was to identify quantitative trait loci (QTLs) that control premature senescence and maturity traits, and to investigate their association under post-flowering drought stress in grain sorghum. A genetic linkage map was developed using a set of recombinant inbred lines (RILs) obtained from the cross B35 × Tx430, which were scored for 142 restriction fragment length polymorphism (RFLP) markers. The RILs and their parental lines were evaluated for post-flowering drought resistance and maturity in four environments. Simple interval mapping identified seven stay-green QTLs and two maturity QTLs. Three major stay-green QTLs (SGA, SGD and SGG) contributed to 42% of the phenotypic variability (LOD 9.0) and four minor QTLs (SGB, SGI.1, SGI.2, and SGJ) significantly contributed to an additional 25% of the phenotypic variability in stay-green ratings. One maturity QTL (DFB) alone contributed to 40% of the phenotypic variability (LOD 10.0), while the second QTL (DFG) significantly contributed to an additional 17% of the phenotypic variability (LOD 4.9). Composite interval mapping confirmed the above results with an additional analysis of the QTL × Environment interaction. With heritability estimates of 0.72 for stay-green and 0.90 for maturity, the identified QTLs explained about 90% and 63% of genetic variability for stay-green and maturity traits, respectively. Although stay-green ratings were significantly correlated (r=0.22, P ≤ 0.05) with maturity, six of the seven stay-green QTLs were independent of the QTLs influencing maturity. Similarly, one maturity QTL (DFB) was independent of the stay-green QTLs. One stay-green QTL (SGG), however, mapped in the vicinity of a maturity QTL (DFG), and all markers in the vicinity of the independent maturity QTL (DFB) were significantly (P ≤ 0.1) correlated with stay-green ratings, confounding the phenotyping of stay-green. The molecular genetic analysis of the QTLs influencing stay-green and maturity, together with the association between these two inversely related traits, provides a basis for further study of the underlying physiological mechanisms and demonstrates the possibility of improving drought resistance in plants by pyramiding the favorable QTLs. Received: 10 October 1998 / Accepted: 12 July 1999     

水稻粒长QTL定位与主效基因的遗传分析

该研究利用短粒普通野生稻矮杆突变体和长粒栽培稻品种KJ01组配杂交组合F_1,构建分离群体F_2;并对该群体粒长进行性状遗传分析,利用平均分布于水稻的12条染色体上的132对多态分子标记对该群体进行QTL定位及主效QTLs遗传分析,为进一步克隆新的主效粒长基因奠定基础,并为水稻粒形育种提供理论依据。结果表明:(1)所构建的水稻杂交组合分离群体F_2的粒长性状为多基因控制的数量性状。(2)对543株F_2分离群体进行QTL连锁分析,构建了控制水稻粒长的连锁遗传图谱,总长为1 713.94 cM,共检测出24个QTLs,只有3个表现为加性遗传效应,其余位点均表现为遗传负效应。(3)检测到的3个主效QTLs分别位于3号染色体的分子标记PSM379～RID24455、RID24455～RM15689和RM571～RM16238之间,且三者对表型的贡献率分别为54.85%、31.02%和7.62%。(4)在标记PSM379～RID24455之间已克隆到的粒长基因为该研究新发现的主效QTL位点。     

Quantitative trait loci for biofortification traits in maize grain

Detecting genes that influence biofortification traits in cereal grain could help increase the concentrations of bioavailable mineral elements in crops to solve the global mineral malnutrition problem. The aims of this study were to detect the quantitative trait loci (QTLs) for phosphorus (P), iron (Fe), zinc (Zn), and magnesium (Mg) concentrations in maize grain in a mapping population, as well as QTLs for bioavailable Fe, Zn, and Mg, by precalculating their respective ratios with P. Elemental analysis of grain samples was done by coupled plasma-optical emission spectrometry in 294 F(4) lines of a biparental population taken from field trials of over 3 years. The population was mapped using sets of 121 polymorphic markers. QTL analysis revealed 32 significant QTLs detected for 7 traits, of which some were colocalized. The Additive-dominant model revealed highly significant additive effects, suggesting that biofortification traits in maize are generally controlled by numerous small-effect QTLs. Three QTLs for Fe/P, Zn/P, and Mg/P were colocalized on chromosome 3, coinciding with simple sequence repeats marker bnlg1456, which resides in close proximity to previously identified phytase genes (ZM phys1 and phys2). Thus, we recommend the ratios as bioavailability traits in biofortification research.     

Identification of quantitative trait loci for cadmium tolerance and accumulation in wheat

Quantitative trait loci (QTL) for Cadmium (Cd) tolerance and accumulation in wheat (Triticum aestivum L.) were identified, using 103 recombinant inbred lines (RILs) derived from a cross of Ch × Sh at germination and seedling stages. The traits of germination, growth and physiology were measured. Cd tolerance indexes (TI) were calculated for plants under Cd stress relative to control conditions. Cd concentrations in both root and shoot were determined and the amount of Cd accumulation and translocation calculated. The phenotypic variation of the above traits showed a continuous distribution pattern among the RILs. Twenty-six QTLs were detected, (16 of which were designated for the traits under the control and Cd stress, 8 for Cd tolerance and 2 for root Cd accumulation). These 26 QTLs individually could explain 7.97–60.16% of the phenotypic variation. Fourteen QTLs were positive (with the additive effects coming from Ch) while the remaining 12 QTLs were negative (with the additive effects contributed by Sh). No QTL were detected in the same region on the chromosomes of wheat. The results indicated that genetic mechanisms controlling the traits of Cd tolerance were independent from each other. Therefore, in this study, the properties of Cd tolerance and accumulation showed to be independent traits in wheat.     

A genetic analysis of seed and berry weight in grapevine.

Fruit size and seedlessness are highly relevant traits in many fruit crop species, and both are primary targets of breeding programs for table grapes. In this work we performed a quantitative genetic analysis of size and seedlessness in an F1 segregating population derived from the cross between a classical seeded (Vitis vinifera L. 'Dominga') and a newly bred seedless ('Autumn Seedless') cultivar. Fruit size was scored as berry weight (BW), and for seedlessness we considered both seed fresh weight (SFW) and the number of seeds and seed traces (SN) per berry. Quantitative trait loci (QTL) analysis of BW detected 3 QTLs affecting this trait and accounting for up to 67% of the total phenotypic variance. QTL analysis for seedlessness detected 3 QTLs affecting SN (explaining up to 35% of total variance) and 6 affecting SFW (explaining up to 90% of total variance). Among them, a major effect QTL explained almost half of the phenotypic variation for SFW. Comparative analysis of QTLs for these traits reduced the number of grapevine genomic regions involved, one of them being a major effect QTL for seedlessness. Association analyses showed that microsatellite locus VMC7F2, closely linked to this QTL, is a useful marker for selection of seedlessnes.     

Molecular mapping in tropical maize (Zea mays L.) using microsatellite markers. 2. Quantitative trait loci (QTL) for grain yield, plant height, ear height and grain moisture

A previous genetic map containing 117 microsatellite loci and 400 F(2) plants was used for quantitative trait loci (QTL) mapping in tropical maize. QTL were characterized in a population of 400 F(2:3) lines, derived from selfing the F(2) plants, and were evaluated with two replications in five environments. QTL determinations were made from the mean of these five environments. Grain yield (GY), plant height (PH), ear height (EH) and grain moisture (GM) were measured. Variance components for genotypes (G), environments (E) and GxE interaction were highly significant for all traits. Heritability was 0.69 for GY, 0.66 for PH, 0.67 for EH and 0.23 for GM. Using composite interval mapping (CIM), a total of 13 distinct QTLs were identified: four for GY, four for PH and five for EH. No QTL was detected for GM. The QTL explained 32.73 % of the phenotypic variance of GY, 24.76 % of PH and 20.91 % of EH. The 13 QTLs displayed mostly partial dominance or overdominance gene action and mapped to chromosomes 1, 2, 7, 8 and 9. Most QTL alleles conferring high values for the traits came from line L-14-4B. Mapping analysis identified genomic regions associated with two or more traits in a manner that was consistent with correlation among traits, supporting either pleiotropy or tight linkage among QTL. The low number of QTLs found, can be due to the great variation that exists among tropical environments.