The effects of various nucleotides on the structure of actin-attached myosin subfragment-1 studied by quick-freeze deep-etch electron microscopy

Stereo electron microscopy of negatively stained images showed that myosin heads in acto-subfragment-1 (S1) covalently cross-linked with 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide were predominantly short and round when ATP was added, in contrast to their uniform tilted appearance in the rigor state. As an attempt to exclude molecules which were actually dissociated but still tethered to actin by artificial cross-links, quick-freeze deep-etch electron microscopy was coupled with the mica flake method to observe uncross-linked native acto-S1 in the presence of ATP. To maintain the low affinity S1 associated to actin in the presence of ATP, a high concentration of acto-S1 was applied to mica flakes whose absorption had been chemically modified. The image of acto-S1 with added ATP agreed well with the expected time-course of reversible dissociation and reassociation, confirming the applicability of this approach to examination of the structural changes of acto-S1. S1 molecules attached to F-actin under rigor conditions or in the presence of ADP were elongated, with the long axis tilted to F-actin. Actin-attached S1 became short and round upon addition of ATP or ADP-inorganic vanadate. Adenyl-5'-yl imidodiphosphate and inorganic pyrophosphate each partially dissociated S1 from actin, as expected.     

Kinetic mechanism of non-muscle myosin IIB: functional adaptations for tension generation and maintenance

Besides driving contraction of various types of muscle tissue, conventional (class II) myosins serve essential cellular functions and are ubiquitously expressed in eukaryotic cells. Three different isoforms in the human myosin complement have been identified as non-muscle class II myosins. Here we report the kinetic characterization of a human non-muscle myosin IIB subfragment-1 construct produced in the baculovirus expression system. Transient kinetic data show that most steps of the actomyosin ATPase cycle are slowed down compared with other class II myosins. The ADP affinity of subfragment-1 is unusually high even in the presence of actin filaments, and the rate of ADP release is close to the steady-state ATPase rate. Thus, non-muscle myosin IIB subfragment-1 spends a significantly higher proportion of its kinetic cycle strongly attached to actin than do the muscle myosins. This feature is even more pronounced at slightly elevated ADP levels, and it may be important in carrying out the cellular functions of this isoform working in small filamentous assemblies.     

The regulation of subtilisin-cleaved actin by tropomyosin/troponin

Vertebrate striated muscle contraction is regulated in a Ca(2+)-dependent fashion by tropomyosin (Tm) and troponin (Tn). This regulation involves shifts in the position of Tm and Tn on actin filaments and may include conformational changes in actin that are then communicated to myosin subfragment 1 (S1). To determine whether subdomain 2 of actin plays a role in this regulation, the DNase-I loop 38-52 of this subdomain was cleaved by subtilisin between residues Met(47) and Gly(48). Despite impaired unregulated function, the potentiation and regulation of cleaved actin movement in the in vitro motility assay was not significantly different from that of uncleaved actin. Stopped-flow measurements of ADP release from regulated and unregulated cleaved acto-S1 showed a marked increase in ADP release from acto-S1 in the presence of the regulatory complex. The enhancement of the actin affinity for S1 in the presence of regulatory proteins was greater for uncleaved than for cleaved F-actin. Finally, both cleaved and uncleaved actins protect myosin loop 1 from papain cleavage equally well. Our results suggest that the potentiation of actin function in the in vitro motility assay by regulatory proteins stems from changes in cross-bridge cycle kinetics. In addition, the unimpaired calcium-sensitive regulation of cleaved actin indicates that subdomain 2 conformation does not play an essential role in the regulation process.     

Structural transition at actin's N-terminus in the actomyosin cross-bridge cycle

Force and motion generation by actomyosin involves the cyclic formation and transition between weakly and strongly bound complexes of these proteins. Actin's N-terminus is believed to play a greater role in the formation of the weakly bound actomyosin states than in the formation of the strongly bound actomyosin states. It has been the goal of this project to determine whether the interaction of actin's N-terminus with myosin changes upon transition between these two states. To this end, a yeast actin mutant, Cys-1, was constructed by the insertion of a cysteine residue at actin's N-terminus and replacement of the C-terminal cysteine with alanine. The N-terminal cysteine was labeled stoichiometrically with pyrene maleimide, and the properties of the modified mutant actin were examined prior to spectroscopic measurements. Among these properties, actin polymerization, strong S1 binding, and the activation of S1 ATPase by pyrenyl-Cys-1 actin were not significantly different from those of wild-type yeast actin, while small changes were observed in the weak S1 binding and the in vitro motility of actin filaments. Fluorescence changes upon binding of S1 to pyrenyl-Cys-1 actin were measured for the strongly (with or without ADP) and weakly (with ATP and ATPgammaS) bound acto-S1 states. The fluorescence increased in each case, but the increase was greater (by about 75%) in the presence of MgATP and MgATPgammaS than in the rigor state. This demonstrates a transition at the S1 contact with actin's N-terminus between the weakly and strongly bound states, and implies either a closer proximity of the pyrene probe on Cys-1 to structural elements on S1 (most likely the loop of residues 626-647) or greater S1-induced changes at the N-terminus of actin in the weakly bound acto-S1 states.     

Functional divergence of human cytoplasmic myosin II: kinetic characterization of the non-muscle IIA isoform

Cytoplasmic (or non-muscle) myosin II isoforms are widely expressed molecular motors playing essential cellular roles in cytokinesis and cortical tension maintenance. Two of the three human non-muscle myosin II isoforms (IIA and IIB) have been investigated at the protein level. Transient kinetics of non-muscle myosin IIB showed that this motor has a very high actomyosin ADP affinity and slow ADP release. Here we report the kinetic characterization of the non-muscle myosin IIA isoform. Similar to non-muscle myosin IIB, non-muscle myosin IIA shows high ADP affinity and little enhancement of the ADP release rate by actin. The ADP release rate constant, however, is more than an order of magnitude higher than the steady-state ATPase rate. This implies that non-muscle myosin IIA spends only a small fraction of its ATPase cycle time in strongly actin-bound states, which is in contrast to non-muscle myosin IIB. Non-muscle myosin II isoforms thus appear to have distinct enzymatic properties that may be of importance in carrying out their cellular functions.     

Myosin-induced changes in F-actin: fluorescence probing of subdomain 2 by dansyl ethylenediamine attached to Gln-41.

Actin labeled at Gln-41 with dansyl ethylenediamine (DED) via transglutaminase reaction was used for monitoring the interaction of myosin subfragment 1 (S1) with the His-40-Gly-42 site in the 38-52 loop on F-actin. Proteolytic digestions of F-actin with subtilisin and trypsin, and acto-S1 ATPase measurements on heat-treated F-actin revealed that the labeling of Gln-41 had a stabilizing effect on subdomain 2 and the actin filaments. DED on Gln-41 had no effect on the values of K(m) and Vmax of the acto-S1 ATPase and the sliding velocities of actin filaments in the in vitro motility assays. This suggests either that S1 does not bind to the 40-42 site on actin or that such binding is not functionally important. The binding of monoclonal antidansyl IgG to DED-F-actin did not affect acto-S1 binding in the absence of nucleotides, indicating that the 40-42 site does not contribute much to rigor acto-S1 binding. Myosin-induced changes in subdomain 2 on actin were manifested through an increase in the fluorescence of DED-F-actin, a decrease in the accessibility of the probe to collisional quenchers, and a partial displacement of antidansyl IgG from actin by S1. It is proposed that these changes in the 38-52 loop on actin originate from S1 binding to other myosin recognition sites on actin.     

Mechanism of inhibition of skeletal muscle actomyosin by N-benzyl-p-toluenesulfonamide

N-Benzyl-p-toluenesulfonamide (BTS) is a small organic molecule that specifically inhibits the contraction of fast skeletal muscle fibers. To determine the mechanism of inhibition by BTS, we performed a kinetic analysis of its effects on the elementary steps of the actomyosin subfragment-1 ATPase cycle. BTS decreases the steady-state acto-S1 ATPase rate approximately 10-fold and increases the actin concentration for half-maximal activation. BTS primarily affects three of the elementary steps of the reaction pathway. It decreases the rate of P(i) release >20-fold in the absence of actin and >100-fold in the presence of actin. It decreases the rate of S1.ADP dissociation from 3.9 to 0.8 s(-)(1) while decreasing the S1.ADP dissociation constant from 2.3 to 0.8 microM. BTS weakens the apparent affinity of S1.ADP for actin, increasing the K(d) from 7.0 to 29.5 microM. ATP binding to S1, hydrolysis, and the affinity of nucleotide-free S1 for actin are unaffected by BTS. Kinetic modeling indicates that the binding of BTS to myosin depends on actin association/dissociation and on nucleotide state. Our results suggest that the reduction of the acto-S1 ATPase rate is due to the inhibition of P(i) release, and the suppression of tension is due to inhibition of P(i) release in conjunction with the decreased apparent affinity of S1.ADP.P(i) and S1.ADP for actin.     

Polymerization, three-dimensional structure and mechanical properties of Ddictyostelium versus rabbit muscle actin filaments

To assess more systematically functional differences among non-muscle and muscle actins and the effect of specific mutations on their function, we compared actin from Dictyostelium discoideum (D-actin) with actin from rabbit skeletal muscle (R-actin) with respect to the formation of filaments, their three-dimensional structure and mechanical properties. With Mg(2+) occupying the single high-affinity divalent cation-binding site, the course of polymerization is very similar for the two types of actin. In contrast, when Ca(2+ )is bound, D-actin exhibits a significantly longer lag phase at the onset of polymerization than R-actin. Crossover spacing and helical screw angle of negatively stained filaments are similar for D and R-F-actin filaments, irrespective of the tightly bound divalent cation. However, three-dimensional helical reconstructions reveal that the intersubunit contacts along the two long-pitch helical strands of D-(Ca)F-actin filaments are more tenuous compared to those in R-(Ca)F-actin filaments. D-(Mg)F-actin filaments on the other hand exhibit more massive contacts between the two long-pitch helical strands than R-(Mg)F-actin filaments. Moreover, in contrast to the structure of R-F-actin filaments which is not significantly modulated by the divalent cation, the intersubunit contacts both along and between the two long-pitch helical strands are weaker in D-(Ca)F-actin compared to D-(Mg)F-actin filaments. Consistent with these structural differences, D-(Ca)F-actin filaments were significantly more flexible than D-(Mg)F-actin.Taken together, this work documents that despite being highly conserved, muscle and non-muscle actins exhibit subtle differences in terms of their polymerization behavior, and the three-dimensional structure and mechanical properties of their F-actin filaments which, in turn, may account for their functional diversity.     

X-ray diffraction evidence for the lack of stereospecific protein interactions in highly activated actomyosin complex

The structure of actomyosin complex while hydrolyzing ATP was investigated by recording X-ray diffraction patterns from rabbit skeletal muscle fibers, in which exogenously introduced rabbit skeletal subfragment-1 (S1) was covalently cross-linked to the endogenous actin filaments in rigor by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC). Approximately two-thirds of the introduced S1 was cross-linked. The cross-linking procedure did not affect the profile of the S1-induced enhancement of the actin-based layer line reflections in rigor, indicating that the acto-S1 interactions remained highly stereospecific. In the presence of ATP, the MgATPase of the S1 was highly activated regardless of calcium levels, presumably because the availability of the stereospecific binding sites for both proteins was maximized by the cross-linking. However, the diffraction pattern in the presence of ATP was striking in that the intensity profile of the strong 1/5.9 nm(-1) layer lines was indistinguishable from that from bare actin filaments, despite the fact that the majority of the S1 was still associated with actin. The change of the intensity profiles upon addition of ATP was completely reversible. Model calculations showed that this result can be explained if the S1 is not only swinging around its pivoting point, but the pivoting point itself is also moving on the actin surface in a range of a few nanometers. The results suggest that the stereospecific binding sites, which have been considered important for actomyosin cycling, are paradoxically left unoccupied for most of the time in this highly activated actomyosin complex.     

The two Caenorhabditis elegans actin-depolymerizing factor/cofilin proteins differently enhance actin filament severing and depolymerization

Actin-depolymerizing factor (ADF)/cofilin enhances the turnover of actin filaments by two separable activities: filament severing and pointed-end depolymerization. Multicellular organisms express multiple ADF/cofilin isoforms in a tissue-specific manner, and the vertebrate proteins are grouped into ADFs and cofilins on the basis of their biochemical activity. A recent comparative study has shown that ADF has greater severing and depolymerizing activities than cofilin [Chen, H., Bernstein, B. W., Sneider, J. M., Boyle, J. A., Minamide, L. S., and Bamburg, J. R. (2004) Biochemistry 43, 7127-7142]. Here, we show that the two Caenorhabditis elegans ADF/cofilin isoforms exhibit different activities for severing and depolymerizing actin filaments. The ADF-like non-muscle isoform UNC-60A had greater activities to cause net depolymerization and inhibit polymerization than the cofilin-like muscle isoform UNC-60B. Surprisingly, UNC-60B exhibited much stronger severing activity than UNC-60A, which was the opposite of what was observed for vertebrate counterparts. Moreover, UNC-60B induced much faster pointed-end depolymerization of rabbit muscle actin than UNC-60A, while UNC-60A caused slightly faster depolymerization of C. elegans actin than UNC-60B. These results suggest that cofilin-like UNC-60B is kinetically more efficient in enhancing actin turnover than ADF-like UNC-60A, while ADF-like UNC-60A is suitable for maintaining higher concentrations of monomeric actin. These functional differences might be specifically adapted for different actin dynamics in muscle and non-muscle cells.     

The ghost muscle fiber with thin filaments reconstructed from nonmuscle actin--a model for studying the cytoskeleton using polarization microfluorimetry]

In muscle fibers which are free of myosin, tropomyosin and troponin thin filaments were reconstructed from muscle and non-muscle G-actin modified with 1,5-IAEDANS. Using polarized microfluorimetry it was shown that actin in such filaments maintained the ability to respond to conformational changes during actin interaction with subfragment of myosin (S1). The models of muscle fibers with reconstructed from non-muscle actin thin filaments are supposed to use for investigation of mechanisms of cell cytoskeleton functions with the help of polarized microfluorimetry.     

Similarities and differences between frozen-hydrated, rigor acto-S1 complexes of insect flight and chicken skeletal muscles

The structure and function of myosin crossbridges in asynchronous insect flight muscle (IFM) have been elucidated in situ using multiple approaches. These include generating “atomic” models of myosin in multiple contractile states by rebuilding the crystal structure of chicken subfragment 1 (S1) to fit IFM crossbridges in lower-resolution electron microscopy tomograms and by “mapping” the functional effects of genetically substituted, isoform-specific domains, including the converter domain, in chimeric IFM myosin to sequences in the crystal structure of chicken S1.We prepared helical reconstructions (∼ 25 Å resolution) to compare the structural characteristics of nucleotide-free myosin0 S1 bound to actin (acto-S1) isolated from chicken skeletal muscle (CSk) and the flight muscles of Lethocerus (Leth) wild-type Drosophila (wt Dros) and a Drosophila chimera (IFI-EC) wherein the converter domain of the indirect flight muscle myosin isoform has been replaced by the embryonic skeletal myosin converter domain. Superimposition of the maps of the frozen-hydrated acto-S1 complexes shows that differences between CSk and IFM S1 are limited to the azimuthal curvature of the lever arm: the regulatory light-chain (RLC) region of chicken skeletal S1 bends clockwise (as seen from the pointed end of actin) while those of IFM S1 project in a straight radial direction. All the IFM S1s are essentially identical other than some variation in the azimuthal spread of density in the RLC region. This spread is most pronounced in the IFI-EC S1, consistent with proposals that the embryonic converter domain increases the compliance of the IFM lever arm affecting the function of the myosin motor. These are the first unconstrained models of IFM S1 bound to actin and the first direct comparison of the vertebrate and invertebrate skeletal myosin II classes, the latter for which, data on the structure of discrete acto-S1 complexes, are not readily available.     

Structural Differences Explain Diverse Functions of Plasmodium Actins

Actins are highly conserved proteins and key players in central processes in all eukaryotic cells. The two actins of the malaria parasite are among the most divergent eukaryotic actins and also differ from each other more than isoforms in any other species. Microfilaments have not been directly observed in Plasmodium and are presumed to be short and highly dynamic. We show that actin I cannot complement actin II in male gametogenesis, suggesting critical structural differences. Cryo-EM reveals that Plasmodium actin I has a unique filament structure, whereas actin II filaments resemble canonical F-actin. Both Plasmodium actins hydrolyze ATP more efficiently than α-actin, and unlike any other actin, both parasite actins rapidly form short oligomers induced by ADP. Crystal structures of both isoforms pinpoint several structural changes in the monomers causing the unique polymerization properties. Inserting the canonical D-loop to Plasmodium actin I leads to the formation of long filaments in vitro. In vivo, this chimera restores gametogenesis in parasites lacking actin II, suggesting that stable filaments are required for exflagellation. Together, these data underline the divergence of eukaryotic actins and demonstrate how structural differences in the monomers translate into filaments with different properties, implying that even eukaryotic actins have faced different evolutionary pressures and followed different paths for developing their polymerization properties.     

Functional adaptation between yeast actin and its cognate myosin motors

We employed budding yeast and skeletal muscle actin to examine the contribution of the actin isoform to myosin motor function. While yeast and muscle actin are highly homologous, they exhibit different charge density at their N termini (a proposed myosin-binding interface). Muscle myosin-II actin-activated ATPase activity is significantly higher with muscle versus yeast actin. Whether this reflects inefficiency in the ability of yeast actin to activate myosin is not known. Here we optimized the isolation of two yeast myosins to assess actin function in a homogenous system. Yeast myosin-II (Myo1p) and myosin-V (Myo2p) accommodate the reduced N-terminal charge density of yeast actin, showing greater activity with yeast over muscle actin. Increasing the number of negative charges at the N terminus of yeast actin from two to four (as in muscle) had little effect on yeast myosin activity, while other substitutions of charged residues at the myosin interface of yeast actin reduced activity. Thus, yeast actin functions most effectively with its native myosins, which in part relies on associations mediated by its outer domain. Compared with yeast myosin-II and myosin-V, muscle myosin-II activity was very sensitive to salt. Collectively, our findings suggest differing degrees of reliance on electrostatic interactions during weak actomyosin binding in yeast versus muscle. Our study also highlights the importance of native actin isoforms when considering the function of myosins.     

Cryoenzymic studies on actomyosin ATPase. Evidence that the degree of saturation of actin with myosin subfragment 1 affects the kinetics of the binding of ATP

The initial steps of actomyosin subfragment 1 (acto-S1) ATPase (dissociation and binding of ATP) were studied at -15 degrees C with 40% ethylene glycol as antifreeze. The dissociation kinetics were followed by light scattering in a stopped-flow apparatus, and the binding of ATP was followed by the ATP chase method in a rapid-flow quench apparatus. The data from the chase experiments were fitted to E + ATP in equilibrium (K1) E.ATP----(k2) E*ATP, where E is acto-S1 or S1. The kinetics of the binding of ATP to acto-S1 were sensitive to the degree of saturation of the actin with S1. There was a sharp transition with actin nearly saturated with S1: when the S1 to actin ratio was low, the kinetics were fast (K1 greater than 300 microM, k2 greater than 40 s-1); when it was high, they were slow (K1 = 14 microM, k2 = 2 s-1). With S1 alone K1 = 12 microM and k2 = 0.07 S-1. With acto heavy meromyosin (acto-HMM) the binding kinetics were the same as with saturated acto-S1, regardless of the HMM to actin ratio. The dissociation kinetics were independent of the S1 to actin ratio. Saturation kinetics were obtained with Kd = 460 microM and kd = 75 S-1. The data for the saturated acto-S1 could be fitted to a reaction scheme, but for lack of structural information the abrupt dependence of the ATP binding kinetics upon the S1 to actin ratio is difficult to explain.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effect of the structure of the N terminus of tropomyosin on tropomodulin function

Tropomodulins (Tmod) bind to the N terminus of tropomyosin and cap the pointed end of actin filaments. Tropomyosin alone also inhibits the rate of actin depolymerization at the pointed end of filaments. Here we have defined 1) the structural requirements of the N terminus of tropomyosin important for regulating the pointed end alone and with erythrocyte Tmod (Tmod1), and 2) the Tmod1 subdomains required for binding to tropomyosin and for regulating the pointed end. Changes in pyrene-actin fluorescence during polymerization and depolymerization were measured with actin filaments blocked at the barbed end with gelsolin. Three tropomyosin isoforms differently influence pointed end dynamics. Recombinant TM5a, a short non-muscle alpha-tropomyosin, inhibited depolymerization. Recombinant (unacetylated) TM2 and N-acetylated striated muscle TM (stTM), long alpha-tropomyosin isoforms with the same N-terminal sequence, different from TM5a, also inhibited depolymerization but were less effective than TM5a. All blocked the pointed end with Tmod1 in the order of effectiveness TM5a >stTM >TM2, showing the importance of the N-terminal sequence and modification. Tmod1-(1-344), lacking the C-terminal 15 residues, did not nucleate polymerization but blocked the pointed end with all three tropomyosin isoforms as does a shorter fragment, Tmod1-(1-92), lacking the C-terminal "capping" domain though higher concentrations were required. An even shorter fragment, Tmod1-(1-48), bound tropomyosin but did not influence actin filament elongation. Tropomyosin-Tmod may function to locally regulate cytoskeletal dynamics in cells by stabilizing actin filaments.     

Probing actomyosin interactions with 2,4-dinitrophenol

Access to different intermediates that follow ATP cleavage in the catalytic cycle of skeletal muscle actomyosin is a major goal of studies that aim toward an understanding of chemomechanical coupling in muscle contraction. 2,4-Dinitrophenol (DNP, 10(-2) M) inhibits muscle contraction, even though it accelerates the ATPase activity of isolated myosin. Here we used myosin subfragment 1 (S1), acto-S1 and mammalian skinned fibers to investigate the action of DNP in the presence of actin. DNP increases acto-S1 affinity and at the same time reduces the maximum rate of turnover as [actin]-->infinity. In skinned fibers, isometric force is reduced to the same extent (K0.5 approximately equal to 6 mM). Although actin activates Pi release from S1 at all DNP concentrations tested, the combination of enhanced S1 activity and reduced acto-S1 activity leads to a reduction in the ratio of these two rates by a factor of 30 at the highest DNP concentration tested. This effect is seen at low as well as at high actin concentrations and is less pronounced with the analog meta-nitrophenol (MNP), which does not inhibit the acto-S1 ATPase. Arrhenius plots for acto-S1 are parallel and linear between 5 and 30 degrees C, indicating no abrupt shifts in rate-limiting step with either DNP or MNP. Analysis of the reduction in isometric force with increasing Pi concentrations suggests that DNP and MNP stabilize weakly bound cross-bridges (AM.ADP.Pi). In addition, MNP (10(-2) M) increases the apparent affinity for Pi.     

Effect of high hydrostatic pressure on chicken myosin subfragment-1

Hydrostatic pressure-induced structural changes in subfragment-1 (S1) of myosin molecule were studied. ATP-induced emission spectra of S1 were used to detect global structural change of S1 by pressure treatment. The fluorescence intensity of unpressurized S1 increased by addition of ATP. The increment of fluorescence of pressurized S1 up to 150 MPa was almost the same as control, whereas it became smaller above 200 MPa. ATP binding ability of S1 examined using 1, N⁶-ethenoadenosine 5′-diphosphate (-ADP) indicated that the binding of -ADP to S1 decreased in the range of 250–300 MPa. S1 pressurized below 250 MPa and unpressurized S1 similarly bound to F-actin, although binding of S1 pressurized above 250 MPa decreased. Electron microscopic observation revealed arrowhead structure in control acto-S1, while disordered arrowhead structure was observed in acto-S1 prepared from pressurized S1 at 300 MPa. S1 pressurized below 250 MPa retained the same actin activated ATPase activity as the control, whereas the activity decreased to 60% at 300 MPa. Pressure treated S1 was easily cleaved by tryptic digestion into three domains, i.e. 27 kDa (N-terminal), 50 and 20 kDa (C-terminal) fragments, which were the same as those in unpressurized one. It is concluded that pressure-induced global structural changes of S1 begin to occur about 150 MPa, and the local structural changes in ATPase and actin binding sites followed with elevating pressure to 250–300 MPa.     

Biochemical kinetic characterization of the Acanthamoeba myosin-I ATPase

Acanthamoeba myosin-IA and myosin-IB are single-headed molecular motors that may play an important role in membrane-based motility. To better define the types of motility that myosin-IA and myosin IB can support, we determined the rate constants for key steps on the myosin-I ATPase pathway using fluorescence stopped-flow, cold-chase, and rapid-quench techniques. We determined the rate constants for ATP binding, ATP hydrolysis, actomyosin-I dissociation, phosphate release, and ADP release. We also determined equilibrium constants for myosin-I binding to actin filaments, ADP binding to actomyosin-I, and ATP hydrolysis. These rate constants define an ATPase mechanism in which (a) ATP rapidly dissociates actomyosin-I, (b) the predominant steady-state intermediates are in a rapid equilibrium between actin-bound and free states, (c) phosphate release is rate limiting and regulated by heavy- chain phosphorylation, and (d) ADP release is fast. Thus, during steady- state ATP hydrolysis, myosin-I is weakly bound to the actin filament like skeletal muscle myosin-II and unlike the microtubule-based motor kinesin. Therefore, for myosin-I to support processive motility or cortical contraction, multiple myosin-I molecules must be specifically localized to a small region on a membrane or in the actin-rich cell cortex. This conclusion has important implications for the regulation of myosin-I via localization through the unique myosin-I tails. This is the first complete transient kinetic characterization of a member of the myosin superfamily, other than myosin-II, providing the opportunity to obtain insights about the evolution of all myosin isoforms.     

Evidence against essential roles for subdomain 1 of actin in actomyosin sliding movements

We have engineered acto-S1chimera proteins carrying the entire actin inserted in loop 2 of the motor domain of Dictyostelium myosin II with 24 or 18 residue-linkers (CP24 and CP18, respectively). These proteins were capable of self-polymerization as well as copolymerization with skeletal actin and exhibited rigor-like structures. The MgATPase rate of CP24-skeletal actin copolymer was 1.06 s(-1), which is slightly less than the V(max) of Dictyostelium S1. Homopolymer filaments of skeletal actin, CP24, and CP18 moved at 4.7+/-0.6, 2.9+/-0.6, and 4.1+/-0.8 microm/s (mean+/-SD), respectively, on coverslips coated with skeletal myosin at 27 degrees C. Statistically thermodynamic considerations suggest that the S1 portion of chimera protein mostly resides on subdomain 1 (SD-1) of the actin portion even in the presence of ATP. This and the fact that filaments of CP18 with shorter linkers moved faster than CP24 filaments suggest that SD-1 might not be as essential as conventionally presumed for actomyosin sliding interactions.