Characterization of a thermophilic l-arabinose isomerase from Thermoanaerobacterium saccharolyticum NTOU1

l-Arabinose isomerase (EC 5.3.1.4, l-AI) mainly catalyzes the reversible aldose–ketose isomerization between l-arabinose and l-ribulose. l-AIs can also catalyze other reactions, such as the conversion of d-galactose to d-tagatose. In this study, the araA gene encoding l-AI was PCR-cloned from Thermoanaerobacterium saccharolyticum NTOU1 and then expressed in Escherichia coli. The recombinant l-AI was purified from the cell-free extract using nickel nitrilotriacetic acid metal-affinity chromatography. The purified enzyme showed an optimal activity at 70 °C and pH 7–7.5. The enzyme was stable at pHs ranging from 6.5 to 9.5 and the activity was fully retained after 2 h incubation at 55–65 °C. The low concentrations of divalent metal ions, either 0.1 mM Mn²⁺ or 0.05 mM Co²⁺, could improve both catalytic activity and thermostability at higher temperatures. The recombinant T. saccharolyticum NTOU1 l-AI has the lowest demand for metal ions among all characterized thermophilic l-AIs. This thermophilic l-AI shows a potential to be used in industry to produce d-tagatose from d-galactose.     

Thermophilic α-glucan phosphorylase from Clostridium thermocellum: Cloning,characterization and enhanced thermostability

ORF Cthe0357 from the thermophilic bacterium Clostridium thermocellum ATCC 27405 that encodes a putative α-glucan phosphorylase (αGP) was cloned and expressed in Escherichia coli. The protein with a C-terminal His-tag was purified by Ni²⁺ affinity chromatography; the tag-free protein obtained from a cellulose-binding module–intein–αGP fusion protein was purified through affinity adsorption on amorphous cellulose followed by intein self-cleavage. Both purified enzymes had molecular weights of ca. 81,000 and similar specific activities. The optimal conditions were pH 6.0–6.5 and 60 °C for the synthesis direction and pH 7.0–7.5 and 80 °C for the degradation direction. This enzyme had broad substrate specificities for different chain length dextrins and soluble starch. The thermal inactivation of this enzyme strongly depended on temperature, protein concentration, and certain addictives that were shown previously to benefit the protein thermostability. The half lifetime of 0.05 mg αGP/mL at 50 °C was extended by 45-fold to 90 h through a combined addition of 0.1 mM Mg²⁺, 5 mM DTT, 1% NaCl, 0.1% Triton X-100, and 1 mg/mL BSA. The enzyme with prolonged stability would work as a building block for cell-free synthetic enzymatic pathway biotransformations, which can implement complicated biocatalysis through assembly of a number of enzymes and coenzymes.     

Purification and biochemical properties of an extracellular acid phytase produced by the Saccharomyces cerevisiae CY strain

An extracellular acid phytase was purified to homogeneity from the culture supernatant of the Saccharomyces cerevisiae CY strain by ultrafiltration, DEAE-Sepharose column chromatography, and Sephacryl S-300 gel filtration. The molecular weight of the purified enzyme was estimated to be 630 kDa by gel filtration. Removing the sugar chain by endoglycosidase H digestion revealed that the molecular mass of the protein decreased to 446 kDa by gel filtration and gave a band of 55 kDa by SDS-PAGE. The purified enzyme was most active at pH 3.6 and 40 °C and was fairly stable from pH 2.5 to 5.0. The phytase displayed broad substrate specificity and had a K_m value of 0.66 mM (sodium phytate, pH 3.6, 40 °C). The phytase activity was completely inhibited by Fe³⁺ and Hg²⁺, and strongly inhibited (maximum of 91%) by Ba²⁺, Co²⁺, Cu⁺, Cu²⁺, Fe²⁺, Mg²⁺, and Sn²⁺ at 5 mM concentrations.     

Purification and characterization of a nitroreductase from the soil bacterium Streptomyces mirabilis

A NADH-dependent nitroreductase from an efficient nitro-reducing soil bacterium, Streptomyces mirabilis DUT001, was isolated and characterized. The enzyme was purified to near homogeneity using ammonium sulfate precipitation, ion exchange chromatography, and gel filtration chromatography. The native enzyme was estimated by gel filtration to have a molecular weight of 68 kDa, and its subunit molecular weight determined by SDS-PAGE was about 34 kDa, which indicated this enzyme was a dimer. Polycyclic nitroaromatic compounds were preferred substrates for this enzyme. The purified enzyme exhibited maximum activity at pH 7.5 and 40 °C. The addition of various chemicals such as reducing agents, metal ions, and chelating agents, had effects on enzyme activity. Mg²⁺, Ca²⁺, Sr²⁺, and 1% (w/v) Triton X-100 increased activity. However, Hg²⁺, Co²⁺, Ni²⁺, Cu²⁺, and SDS reduced activity. The maximum reaction rate (V_max) was 64 μM min^?1 mg^?1 enzyme and the apparent Michaelis–Menten constants (K_m) for 4-nitro-1,8-naphthalic anhydride and NADH were 276 and 29 μM, respectively. Menadione, bimethylenebis, sodium benzoate, and antimycin A were inhibitors of the purified nitroreductase with apparent inhibition constants (K_is) of 20, 36, 44 and 80 μM, respectively.     

Purification and characterization of an azoreductase from Escherichia coli CD-2 possessing quinone reductase activity

An oxygen-insensitive intracellular enzyme that is responsible for the decolorization of azo dyes was purified from Escherichia coli CD-2. The molecular weight of the purified enzyme was estimated as 27,000 ± 500 Da. Protein identification indicated that the enzyme had high sequence homology with E. coli K12 quinone reductase, and the enzyme was proved to have both azoreductase and quinone reductase activity. With methyl red as substrate, the optimal pH value and temperature were 6.5 and 37 °C, respectively. The enzyme was stable under different physiochemical conditions. The azoreductase activity was restrained by SDS and was almost completely inhibited by Co²⁺ and Hg²⁺. K_m and V_max values were 0.18 mM and 8.12 U mg^?1 of protein for NADH and 0.05 mM and 6.46 U mg^?1 of protein for methyl red, respectively. The purified enzyme could efficiently decolorize methyl red with both NADH and NADPH as electron donors.     

Purification and characterization of a new alkali-thermostable lipase from Staphylococcus aureus isolated from Arachis hypogaea rhizosphere

An extracellular lipase (EC 3.1.1.3), SAL-PP1, from Staphylococcus aureus isolated from Arachis hypogaea rhizosphere was purified and characterized. The enzyme was purified using PALL'S Microsep centrifugal device (10 kD cut off), hydrophobic interaction (phenyl sepharose CL-4B column) and Superose-12 gel filtration chromatography and found to have a molecular mass of around 49 kDa. The gene fragment encoding the part of the catalytic site of the SAL-PP1 lipase was sequenced and the deduced amino acid sequence shows 93% identity with that of SEL3. SAL-PP1 showed activity against long acyl-chain triglycerides, various p-nitrophenyl esters and phospholipids. The enzyme shows high stability and activity after incubation with various metal ions (retained >90% activity in presence of Ca²⁺, Na⁺, Cu²⁺, Mg²⁺, Fe²⁺, or Hg²⁺ at 10 mM), organic solvents (retained >80% activity in presence of acetonitrile, ethanol, DMSO, methanol, isopropanol, toluene, or ethylene glycol at 10 mM), detergents (retained >70% activity in Triton X-100, Tween 80, or sodium deoxycholate at 10 mM) and irreversible inhibitors (retained >77% activity in presence of PMSF, leupetin, or β-mercaptoethanol, at 1 mM). Thermal inactivation studies revealed a temperature dependent unfolding of secondary structure of protein. SAL-PP1 showed maximal activity and stability at pH 8.0 and pH 9.0, respectively. The alkali-thermostability, organic solvent-tolerance and broad substrate specificity of this enzyme may have potential implications in detergent formulations, biotransformation, industries, and medicine.     

Gastro-intestinal handling of water and solutes in three species of elasmobranch fish,the white-spotted bamboo shark,Chiloscyllium plagiosum,little skate,Leucoraja erinacea and the clear nose skate Raja eglanteria

The present study reports aspects of GI tract physiology in the white-spotted bamboo shark, Chiloscyllium plagiosum, little skate, Leucoraja erinacea and the clear nose skate, Raja eglanteria. Plasma and stomach fluid osmolality and solute values were comparable between species, and stomach pH was low in all species (2.2 to 3.4) suggesting these elasmobranchs may maintain a consistently low stomach pH. Intestinal osmolality, pH and ion values were comparable between species, however, some differences in ion values were observed. In particular Ca²⁺ (19.67 ± 3.65 mM) and Mg²⁺ (43.99 ± 5.11 mM) were high in L. erinacea and Mg²⁺ was high (130.0 ± 39.8 mM) in C. palgiosum which may be an indication of drinking. Furthermore, intestinal fluid HCO₃^? values were low (8.19 ± 2.42 and 8.63 ± 1.48 mM) in both skates but very high in C. plagiosum (73.3 ± 16.3 mM) suggesting ingested seawater may be processed by species-specific mechanisms. Urea values from the intestine to the colon dropped precipitously in all species, with the greatest decrease seen in C. plagiosum (426.0 ± 8.1 to 0 mM). This led to the examination of the molecular expression of both a urea transporter and a Rhesus like ammonia transporter in the intestine, rectal gland and kidney in L. erinacea. Both these transporters were expressed in all tissues; however, expression levels of the Rhesus like ammonia transporter were orders of magnitude higher than the urea transporter in the same tissue. Intestinal flux rates of solutes in L. erinacea were, for the most part, in an inward direction with the notable exception of urea. Colon flux rates of solutes in L. erinacea were all in an outward direction, although absolute rates were considerably lower than the intestine, suggestive of a much tighter epithelia. Results are discussed in the context of the potential role of the GI tract in salt and water, and nitrogen, homeostasis in elasmobranchs.     

Capillary electrophoresis separation and matrix-assisted laser desorption/ionization mass spectrometry characterization of bovine serum albumin–fluorescein isothiocyanate conjugates

A protocol using enzymatic digestion, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and capillary electrophoresis with laser induced fluorescence detection (CE-LIF) for the investigation of the binding of the fluorescent contact allergen fluorescein isothiocyanate (FITC) to the 66 kDa large protein bovine serum albumin (BSA), as a model system for protein–hapten binding in the skin, is presented. Mass spectra of BSA–FITC digestions, using trypsin and chymotrypsin, respectively, provided sequence coverage of 97%. To investigate the number of FITC-bound peptides using CE-LIF separation, three different buffer salts at four different pH levels were evaluated. The use of 20 mM sodium citrate pH 6.5 as well as 20 mM sodium phosphate pH 6.5 or pH 7.5 as background electrolyte revealed high numbers of peptides with at least one bound FITC. The effect of the electrolyte counter ion on MALDI-MS was investigated and was found to have effect on the MALDI spectra signal-to-noise (S/N) at 50 mM but not at 10 mM. Of the 60 theoretical FITC-binding sites in BSA this MALDI-MS protocol presents 30 defined, 28 possible and 2 non-binding sites for FITC.     

Purification of a laccase from fungus combs in the nest of Odontotermes formosanus

A new enzyme was isolated from the fungus combs in the nest of Odontotermes formosanus and identified as a laccase. The single laccase was purified with a purification factor of 16.83 by ammonium sulphate precipitation and anion exchange chromatography, to a specific activity of 211.11 U mg⁻¹. Its molecular mass was 65 kDa. The optimum pH value and temperature were 4.0 °C and 10 °C with ABTS as the substrate, respectively. The enzyme activity stabilized at temperatures between 10 °C and 30 °C and decreased rapidly when the temperature was above 30 °C. The V_max and K_m values were 3.62 μmol min⁻¹ mg⁻¹ and 119.52 μM, respectively. Ethanol concentration affected laccase activity, inhibiting 60% of enzyme activity at a concentration of 70%. Metal ions of Mg²⁺, Ba²⁺ and Fe²⁺ showed inhibition on enzyme activity of 17.2%, 5.3% and 9.4%, respectively, with the increase of metal ions concentration from 1 mM to 5 mM. Especially Fe²⁺ strongly inhibited enzyme activity up to 89% inhibition at a concentration of 1 mM.     

Purification and biochemical characterization of angiotensin I-converting enzyme (ACE) from ostrich lung: The effect of 2,2,2-trifluoroethanol on ACE conformation and activity

This work reports the purification and biochemical characterization of angiotensin I-converting enzyme (ACE) from ostrich (Struthio camelus) lung. The molecular weight of the purified enzyme was approximately evaluated to be 200 kDa and the maximum enzyme activity was observed at pH 7.5. The enzyme activity was increased by detergents of Triton X-100 (0.01%), cetyltrimethylammonium bromide (CTAB) (0.1 and 1 mM) and sodium dodecyl sulfate (SDS) (0.1 mM), while decreased by Triton X-100 (1% and 10%) and SDS (1 mM and 10 mM). The secondary and tertiary structure and activity of ACE in the absence and presence of trifluoroethanol (TFE) were investigated using circular dichroism, fluorescence quenching and UV–visible spectroscopy, respectively. Our results revealed that TFE stabilizes ACE at low concentrations, while acts as a denaturant at higher concentration (20%). The K_m, K_cat and K_cat/K_m values of ostrich ACE towards FAPGG were 0.8 × 10^?4 M, 59,240 min^?1 and 74 × 10⁷ min^?1 M^?1, respectively. The values of IC₅₀ and K_i for captopril were determined to be 36.5 nM and 16.6 nM, respectively. In conclusion, ostrich lung ACE is a new enzyme which could be employed as a candidate for studying ACE structure and its natural or synthetic inhibitors.     

Characterization of a spore surface lipase from the biocontrol agent Metarhizium anisopliae

A Metarhizium anisopliae spore surface lipase (MASSL) strongly bound to the fungal spore surface has been purified by ion exchange chromatography on DEAE sepharose followed by ultrafiltration and hydrophobic interaction chromatography on phenyl sepharose. Electrophoretic analyses showed that the molecular weight of this lipase is ～66 kDa and pI is 5.6. Protein sequencing revealed that identified peptides in MASSL shared identity with several lipases or lipase-related sequences. The enzyme was able to hydrolyze triolein, the animal lipid cholesteryl stearate and all ρNP ester substrates tested with some preference for esters with a short acyl chain. The values of K_m and V_max for the substrates ρNP palmitate and ρNP laurate were respectively 0.474 mM and 1.093 mMol min^?1 mg^?1 and 0.712 mM and 5.696 mMol min^?1 mg^?1. The optimum temperature of the purified lipase was 30 °C and the enzyme was most stable within the most acid pH range (pH 3–6). Triton X-100 increased and SDS reduced enzyme lipolytic activity. MASSL activity was stimulated by Ca²⁺, Mg²⁺ and Co²⁺ and inhibited by Mn²⁺. The inhibitory effect on activity exerted by EDTA and EGTA was limited, while the lipase inhibitor Ebelactone B completely inhibited MASSL activity as well as PMSF. Methanol 0.5% apparently did not affect MASSL activity while β-mercaptoethanol activated the enzyme.     

Highly thermostable carbonic anhydrase from Persephonella marina EX-H1: Its expression and characterization for CO2-sequestration applications

The codon-optimized carbonic anhydrase gene of Persephonella marina EX-H1 (PMCA) was expressed and characterized. The gene with the signal peptide removed, PMCA(sp−), resulted in the production of approximately five times more purified protein than from the intact gene PMCA using an Escherichia coli expression system. PMCA(sp−) is formed as homo-dimer complex. PMCA(sp−) has a wide pH tolerance (optimum pH 7.5) and a high thermostability even at 100 °C (88 min of thermal deactivation half-life). The melting temperature for PMCA(sp−) was 84.5 °C. The apparent k_cat and K_m values for CO₂ hydration were 3.2 × 10⁵ s⁻¹ and 10.8 mM. The activity of the PMCA(sp−) enzyme was enhanced by Zn²⁺, Co²⁺, and Mg²⁺, but was strongly inhibited by Cu²⁺, Fe³⁺, Al³⁺, Pb²⁺, Ag⁺, and Hg²⁺. PMCA(sp−) readily catalyzed the hydration of CO₂, precipitating CaCO₃ as calcite in the presence of Ca²⁺.     

Production of β-fructofuranosidases by Aspergillus niveus using agroindustrial residues as carbon sources: Characterization of an intracellular enzyme accumulated in the presence of glucose

The production of β-fructofuranosidases by Aspergillus niveus, cultivated under submerged fermentation using agroindustrial residues, was investigated. The highest productivity of β-fructofuranosidases was obtained in Khanna medium supplemented with sugar cane bagasse as carbon source. Glucose enhanced the production of the intracellular enzyme, whereas that of the extracellular one was decreased. The intracellular β-fructofuranosidase was a trimeric protein of approximately 141 kDa (gel filtration) with 53.5% carbohydrate content, composed of 57 kDa monomers (SDS-PAGE). The optimum temperature and optimum pH were 60 °C and 4.5, respectively. The purified enzyme showed good thermal stability and exhibited a half-life of 53 min at 60 °C. β-Fructofuranosidase activity was slightly activated by Cu²⁺, Mn²⁺, Mg²⁺, and Na⁺ at 1 mM concentration. The enzyme hydrolyzed sucrose, raffinose, and inulin, with K_d values of 5.78 mM, 5.74 mM, and 1.74 mM, respectively.     

Isolation and characterization of dioscin-α-l-rhamnosidase from bovine liver

A novel dioscin-α-l-rhamnosidase was isolated and purified from fresh bovine liver. The activity of the enzyme was tested using diosgenyl-2,4-di-O-α-l-rhamnopyranosyl-β-d-glucopyranoside as a substrate. It was cleaved by the enzyme to two compounds, rhamnoses and diosgenyl-O-β-d-glucopyranoside. The optimal conditions for enzyme activity were that temperature was at 42 °C, pH was at 7, reaction time was at 4 h, and the substrate concentration was at 2%. Furthermore, metal ions such as Fe³⁺, Cu²⁺, Zn²⁺, Ca²⁺ and Mg²⁺ showed different effects on the enzyme activity. Mg²⁺ acted as an activator whereas Cu²⁺, Fe³⁺, and Zn²⁺ acted as strong inhibitors in a wide range of concentrations from 0 to 200 mM. It was interesting that Ca²⁺ played a role as an inhibitor when its concentration was at 10 mM and acted as an activator at the other concentrations for the enzyme. Moreover, the molecular weight of enzyme was determined as 75 kDa.     

A putative proline iminopeptidase of Thermotoga maritima is a leucine aminopeptidese with lysine-p-nitroanilide hydrolyzing activity

A putative aminopeptidase P gene (TM0042, Swissport Q9WXP9, GeneBank AAD35136) of Thermotoga maritima was cloned and expressed in Escherichia coli BL21 (RIL). The enzyme was purified by the combination of ion exchange chromatography; Q-Sepharose and Mono-Q column. The purified recombinant T. maritima aminopeptidase P enzyme, gave a homogenous protein band with an apparent molecular weight of 40 kDa in SDS-PAGE analysis. The enzyme was purified 23-fold with the specific activity of 16.5 unit/mg with the final recovery of 22%. The enzyme was thermostable up to 90 °C for 30 min. An optimal activity was observed at 90 °C at pH 7.5. The purified enzyme was stable between pH 6.5 and 8 at 80 °C with the optimum of pH 7.5. Based on the amino acid sequence, the enzyme belongs to M 24B family of metalloenzymes. None of the divalent cations enhance the activity of the enzyme while Pb²⁺, Cu²⁺, Co²⁺, Cd²⁺, and Zn²⁺ were inhibitory to the enzyme activity. Divalent cation of Mg²⁺ showed 100% enzyme activity, to a lesser extent, Ca²⁺ and Mn²⁺ whereas strong inhibition of enzyme activity was observed with Zn²⁺ and Cd²⁺. The enzyme designated as putative aminopeptidase P was very low activity in hydrolyzing proline-p-nitroanilide. Kinetic studies on the purified enzyme confirmed that the enzyme is a leucine aminopeptidase. Enzyme also hydrolyzes lysine-p-nitroanilide with efficiency comparable to that of leucine-p-nitroanilide. This is the first report of leucine aminopeptidase with lysine-p-nitroanilide hydrolyzing activity, which belongs to the M 24B family of metalloenzymes.     

Application of chitosan beads immobilized Rhodococcus sp. NCIM 2891 cholesterol oxidase for cholestenone production

The cell-bound cholesterol oxidase from the Rhodococcus sp. NCIM 2891 was purified three fold by diethylaminoethyl–sepharose chromatography. The estimated molecular mass (SDS-PAGE) and K_m of the enzyme were ∼55.0 kDa and 151 μM, respectively. The purified cholesterol oxidase was immobilized on chitosan beads by glutaraldehyde cross-linking reaction and immobilization was confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray analysis. The optimum temperature (45 °C, 5 min) for activity of the enzyme was increased by 5 °C after immobilization. Both the free and immobilized cholesterol oxidases were found to be stable in many organic solvents except for acetone. Fe²⁺ and Pb²⁺ at 0.1 mM of each acted as inhibitors, while Ag⁺, Ca²⁺, Ni²⁺ and Zn²⁺ activated the enzyme at similar concentration. The biotransformation of cholesterol (3.75 mM) with the cholesterol oxidase immobilized beads (3.50 U) leads to ∼88% millimolar yield of cholestenone in a reaction time of 9 h at 25 °C. The immobilized enzyme retains ∼67% activity even after 12 successive batches of operation. The biotransformation method thus, shows a great promise for the production of pharmaceutically important cholestenone.     

KMUP-1 ameliorates monocrotaline-induced pulmonary arterial hypertension through the modulation of Ca2+ sensitization and K+-channel

AimsThis study investigates the actions of KMUP-1 on RhoA/Rho-kinase (ROCK)-dependent Ca²⁺ sensitization and the K⁺-channel in chronic pulmonary arterial hypertension (PAH) rats.Main methodsSprague–Dawley rats were divided into control, monocrotaline (MCT), and MCT + KMUP-1 groups. PAH was induced by a single intraperitoneal injection (i.p.) of MCT (60 mg/kg). KMUP-1 (5 mg/kg, i.p.) was administered once daily for 21 days to prevent MCT-induced PAH. All rats were sacrificed on day 22.Key findingsMCT-induced increased right ventricular systolic pressure (RVSP) and right ventricular hypertrophy were prevented by KMUP-1. In myograph experiments, KCl (80 mM), phenylephrine (10 µM) and K⁺ channel inhibitors (TEA, 10 mM; paxilline, 10 µM; 4-AP, 5 mM) induced weak PA contractions in MCT-treated rats compared to controls, but the PA reactivity was restored in MCT + KMUP-1-treated rats. By contrast, in β-escin- or α-toxin-permeabilized PAs, CaCl₂-induced (1.25 mM, pCa 5.1) contractions were stronger in MCT-treated rats, and this action was suppressed in MCT + KMUP-1-treated rats. PA relaxation in response to the ROCK inhibitor Y27632 (0.1 μM) was much higher in MCT-treated rats than in control rats. In Western blot analysis, the expression of Ca²⁺-activated K⁺ (BK_Ca) and voltage-gated K⁺ channels (Kv2.1 and Kv1.5), and ROCK II proteins was elevated in MCT-treated rats and suppressed in MCT + KMUP-1-treated rats. We suggest that MCT-treated rats upregulate K⁺-channel proteins to adapt to chronic PAH.SignificanceKMUP-1 protects against PAH and restores PA vessel tone in MCT-treated rats, attributed to alteration of Ca²⁺ sensitivity and K⁺-channel function.     

Metabolic engineering of Saccharomyces cerevisiae for the biotechnological production of succinic acid

The production of bio-based succinic acid is receiving great attention, and several predominantly prokaryotic organisms have been evaluated for this purpose. In this study we report on the suitability of the highly acid- and osmotolerant yeast Saccharomyces cerevisiae as a succinic acid production host. We implemented a metabolic engineering strategy for the oxidative production of succinic acid in yeast by deletion of the genes SDH1, SDH2, IDH1 and IDP1. The engineered strains harbor a TCA cycle that is completely interrupted after the intermediates isocitrate and succinate. The strains show no serious growth constraints on glucose. In glucose-grown shake flask cultures, the quadruple deletion strain Δsdh1Δsdh2Δidh1Δidp1 produces succinic acid at a titer of 3.62 g L^?1 (factor 4.8 compared to wild-type) at a yield of 0.11 mol (mol glucose)^?1. Succinic acid is not accumulated intracellularly. This makes the yeast S. cerevisiae a suitable and promising candidate for the biotechnological production of succinic acid on an industrial scale.     

Partial nitrification under limited dissolved oxygen conditions

Partial nitrification to nitrite is technically feasible and economically favourable, especially when wastewaters contained high ammonium concentrations or low C/N ratios. Partial nitrification can be obtained by selectively inhibiting nitrite-oxidizing bacteria (NOB) through appropriate regulation of the pH, temperature and dissolved oxygen (DO) concentrations. The effect of pH, DO levels and temperature on ammonia oxidation rate and nitrite accumulation was investigated in order to determine the optimal conditions for partial nitrification of synthetic wastewater with high ammonia concentration. The experiments performed at low DO levels to lower the total oxygen needed in the nitrification step, which means great saving in aeration. During the start-up stage pH and DO were set at 7.0–7.4 and 0.5 mg/l, respectively. The reactor was operated until complete partial nitrification was achieved. The effect of pH, DO on partial nitrification was studied, as pH was kept at 6.5, 7.5, 8.5, 9.5 and DO at 0.5±0.2, 1.5±0.2 and 2.5±0.2 mg/l, and temperature at 30 °C. The influence of temperature on k_a value was studied by keeping pH=7.5, DO=1.5 mg/l and temperature was controlled at 12, 20 and 30 °C, respectively. The results showed that partial nitrification to nitrite was steadily obtained and the optimal operational parameters were pH=7.5, DO=1.5 mg/l, T=30 °C based on ammonia oxidation rate and nitrite accumulation rate. The maximum k_a was achieved and to be 115.1×10⁻³ mg NH₄⁺–N (mg VSS h)⁻¹ under this condition.     

Dominance of yeast in activated sludge under acidic pH and high organic loading

Flow cytometry-fluorescent in situ hybridization (FC-FISH) was used to investigate the effect of controlled pH and/or varied organic loading on the content of yeast and bacterial cells in an activated sludge system (AS) individually operating in continuous and batch mode for treatment of high-strength industrial wastewater. Specifically, we attempted to develop a yeast-predominant activated sludge system (Y-AS). For the batch-mode AS, bacteria-dominated AS (B-AS) obtained at pH 6.5–7.5 induced higher chemical oxygen demand (COD) removal than Y-AS obtained at acidic pH (5.0–6.0 and 4.0–5.0). For the continuous-mode AS operating at COD loadings of 2.5–2.8 kg COD m⁻³ d⁻¹, it was difficult to achieve a Y-AS solely by controlling the pH level at 7.0 to 5.1 then to 4.1 because bacteria stably accounted for greater than 98% of the total cells, regardless of the pH levels. Therefore, the effects of varied COD loadings (2.1, 8.7 and 21.0 kg COD m⁻³ d⁻¹) on continuous-mode AS operation at acidic pH (4.5) was investigated. Both acidic pH and high COD loading levels were found to be prerequisites for yeast to dominate the sludge microbial community in the continuous-mode AS.