On hexenuronic acid (HexA) removal and mediator coupling to pulp fiber in the laccase/mediator treatment

Flax soda/AQ pulps were treated with different fungal laccase-mediator combinations followed by physical and chemical characterization of the pulps to obtain a thorough understanding of the laccase/mediator effects on hexenuronic acid (HexA) removal and the coupling of mediator onto pulps for fiber functionalization. Large differences were found and the presence of lauryl gallate (LG) during Trametes villosa laccase (TvL) treatment (TvL + LG) resulted in a much larger reduction of pulp-linked HexA than the combination of p-coumaric acid (PCA) and Pycnoporus cinnabarinus laccase (PcL). A major portion of LG became attached to the pulp as revealed by an increase in the kappa number and further confirmed by thioacidolysis and ¹H NMR analysis of solubilized pulp fractions. Additional experiments with other chemical pulps and isolated pulp xylan and lignin revealed that HexA seems to be the sole pulp component attacked by TvL + LG. As a substrate for TvL, the reaction preference order is PCA > HexA > LG.     

Enzymatic grafting of natural phenols to flax fibres: Development of antimicrobial properties

Unbleached flax fibres for paper production were treated with laccase from Pycnoporus cinnabarinus and low molecular weight phenols (syringaldehyde - SA, acetosyringone - AS and p-coumaric acid - PCA) to evaluate the potential of this treatment to biomodify high cellulose content fibres. After the enzymatic treatment with the phenols, an increase in kappa number was found, probably due to a covalent binding of the phenoxy radicals on fibres. Grafting was more evident in pulps treated with PCA (an increase of 4 kappa number points with respect to the laccase control was achieved). Paper handsheets from treated pulps showed antimicrobial activity against the bacteria tested: Staphylococcus aureus, Pseudomonas aeruginosa and Klebsiella pneumoniae. An important reduction on microbial count was obtained after incubation of liquid cultures of the bacteria with grafted handsheets. AS and PCA grafted fibres showed a high antibacterial activity on K. pneumoniae, getting a nearly total growth inhibition. AS fibres also caused a high reduction in bacterial population of P. aeruginosa (97% reduction). Optical properties of handsheets from treated pulps were also determined, showing a brightness decrease and increase in coloration, evaluated by CIE L*a*b* system, caused by the laccase induced grafting of the phenols. The results suggest that these low molecular weight phenols, covalently bound to the flax fibres by the laccase treatment, can act as antimicrobial agents and produce handsheets with antimicrobial activity.     

Increased water resistance of CTMP fibers by oat (Avena sativa L.) husk lignin

The insertion of oat husk lignin onto chemithermomechanical pulp (CTMP) fibers was studied to increase fiber hydrophobicity. The pretreated pulp samples were subsequently used for preparation of handsheets for characterization. Treatment of CTMP with laccase in the presence of oat husk lignin resulted in a significant increase in hydrophobicity of the handsheet surface, as indicated by dynamic contact angle analysis. Water absorption time of 8 s was obtained with initial contact angle of 118°. Although the handsheet's brightness was reduced by 33%, tensile index was only subtly decreased. Neither laccase nor oat husk lignin alone gave much improved water absorption times. Therefore, handsheets made of laccase-treated pulp with and without oat husk lignin were further examined by XPS, which suggested that both laccase and oat husk lignin were inserted onto CTMP fibers. The oat husk lignin was distributed as heterogeneous aggregates on the handsheet surface whereas laccase was uniformly distributed. Evidence was obtained that the adsorbed laccase layer formed a noncovalent base for the insertion of oat husk lignin onto fiber surfaces.     

Degradation of Azo Dyes by Laccase and Ultrasound Treatment

The goal of this work was to investigate the decomposition of azo dyes by oxidative methods, such as laccase and ultrasound treatments. Each of these methods has strong and feeble sides. The laccase treatment showed high decolorization rates but cannot degrade all investigated dyes (reactive dyes), and high anionic strength led to enzyme deactivation. Ultrasound treatment can decolorize all tested dyes after 3 h at a high energy input, and prolonged sonication leads to nontoxic ionic species, which was demonstrated by ion chromatography and toxicity assays. For the first time, it was shown that a combination of laccase and ultrasound treatments can have synergistic effects, which was shown by higher degradation rates. Bulk light absorption and ion-pairing high-performance liquid chromatography (IP-HPLC) were used for process monitoring, while with reversed-phase HPLC, a lower number of intermediates than expected by IP-HPLC was found. Liquid chromatography-mass spectrometry indicated that both acid orange dyes lead to a common end product due to laccase treatment. Acid Orange 52 is demethylated by laccase and ultrasound treatment. Further results confirmed that the main effect of ultrasound is based on ˙OH attack on the dye molecules.     

Non-antibiotic antibacterial activity of dodecyl gallate

Dodecyl (C(12)) gallate (3,4,5-trihydroxybenzoate) (1) was found to possess antibacterial activity specifically against Gram-positive bacteria, in addition to its potent antioxidant activity. The time-kill curve study indicates that this amphipathic gallate exhibits bactericidal activity against methicillin resistant Staphylococcus aureus (MRSA) strains. Dodecyl (lauryl) gallate inhibited oxygen consumption in whole cells and oxidation of NADH in membrane preparation. The antibacterial activity of this gallate comes in part from its ability to inhibit the membrane respiratory chain. As far as alkyl gallates are concerned, their antimicrobial spectra and potency depend in part on the hydrophobic portion of the molecule.     

Degradation of azo dyes by laccase and ultrasound treatment

The goal of this work was to investigate the decomposition of azo dyes by oxidative methods, such as laccase and ultrasound treatments. Each of these methods has strong and feeble sides. The laccase treatment showed high decolorization rates but cannot degrade all investigated dyes (reactive dyes), and high anionic strength led to enzyme deactivation. Ultrasound treatment can decolorize all tested dyes after 3 h at a high energy input, and prolonged sonication leads to nontoxic ionic species, which was demonstrated by ion chromatography and toxicity assays. For the first time, it was shown that a combination of laccase and ultrasound treatments can have synergistic effects, which was shown by higher degradation rates. Bulk light absorption and ion-pairing high-performance liquid chromatography (IP-HPLC) were used for process monitoring, while with reversed-phase HPLC, a lower number of intermediates than expected by IP-HPLC was found. Liquid chromatography-mass spectrometry indicated that both acid orange dyes lead to a common end product due to laccase treatment. Acid Orange 52 is demethylated by laccase and ultrasound treatment. Further results confirmed that the main effect of ultrasound is based on *OH attack on the dye molecules.     

Oxidation of milled wood lignin with laccase, tyrosinase and horseradish peroxidase

In this paper the oxidation of milled wood lignin (MWL), catalysed by three enzymes, i.e. laccase, tyrosinase and horseradish peroxidase (HRP) was studied. The oxidation was followed by measuring the consumption of O₂ during laccase and tyrosinase treatment and of H₂O₂ during HRP treatment. Both laccase and HRP were found to oxidise lignin effectively, whereas the effect of tyrosinase was negligible. The changes in MWL molecular-weight distributions caused in the reactions were analysed by gel permeation chromatography. Both laccase and HRP treatments were found to polymerise MWL. Peroxidase treatment was found to decrease the amount of phenolic hydroxyls in MWL, whereas no such effect could be detected in the laccase-treated sample. Both laccase and HRP treatments were, however, found to increase the amount of conjugated structures in MWL. The formation of phenoxy radicals during the treatments was studied by electron paramagnetic resonance spectroscopy. Phenoxy radicals were detected in both laccase and HRP-treated samples. The amount of the formed phenoxy radicals was found to be essentially constant during the detected time (i.e. 20–120 min after the addition of enzyme).     

Laccase-initiated cross-linking of lignocellulose fibres using a ultra-filtered lignin isolated from kraft black liquor

In this work, the effect of Trametes pubescens laccase (TpL) used in combination with a low-molecular-weight ultra-filtered lignin (UFL) to improve mechanical properties of kraft liner pulp and chemi-thermo-mechanical pulp was studied. UFL was isolated by ultra-filtration from the kraft cooking black liquor obtained from softwood pulping. This by-product from the pulp industry contains an oligomeric lignin with almost twice the amount of free phenolic moieties than residual kraft pulp lignin. The reactivity of TpL on UFL and kraft pulp was studied by nuclear magnetic resonance spectroscopy and size exclusion chromatography. Laccase was shown to polymerise UFL and residual kraft pulp lignin in the fibres, seen by the increase in their average molecular weight and in the case of UFL as a decrease in the amount of phenolic hydroxyls. The laccase initiated cross-linking of lignin, mediated by UFL, which gives rise to more than a twofold increase in wet strength of kraft liner pulp handsheets without loosing other critical mechanical properties. Hence, this could be an interesting path to decrease mechano-sorptive creep that has been reported to lessen in extent as wet strength is given to papers. The laccase/2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) mediator system showed a greater increase in wet tensile strength of the resulting pulp sheets than the laccase/UFL system. However, other mechanical properties such as dry tensile strength, compression strength and Scott Bond internal strength were negatively affected by the laccase/ABTS system.     

Evaluation of tertiary treatment by fungi,enzymatic and photo-Fenton oxidation on the removal of phenols from a kraft pulp mill effluent: a comparative study

Pulp and paper mills generate pollutants associated to their effluents depending upon the type of process, type of the wood materials, process technology applied, management practices, internal recirculation of the effluent for recovery, the amount of water used in the industrial process and type of secondary treatment. This study is the first that reports a simultaneous evaluation of the effects of tertiary treatments by fungi (Rhizopus oryzae and Pleurotus sajor caju), by enzyme (laccase) and by an oxidation process (photo-Fenton) on individual phenols (vanillin, guaiacol, phloroglucinol, vanillic acid and syringic acid) of a Eucalyptus globulus bleached kraft pulp and paper mill final effluent after secondary treatment (BKPME). The tertiary treatments were applied on BKPME samples and in BKPME samples supplemented with extra concentration of each phenol. Tertiary treatments by Rhizopus oryzae and photo-Fenton oxidation were able of complete removal (100%) of phenols on BKPME samples whereas P. sajor caju and laccase were able of 60–85% removal. On BKPME samples with added concentration of each phenol, photo-Fenton was the only treatment capable of total phenols removal (100%), which suggests a great potential for its application.     

Enzymatic treatment of mechanical pulp fibers for improving papermaking properties

Three enzyme preparations (crude cellulase, laccase, and proteinase) were evaluated for their potential to improve the papermaking properties of mechanical pulp. After treating a long fibre-rich fraction of the pulp with enzyme, the fibres were recombined with untreated fines for handsheet making and testing. None of the enzymes altered the retention of fines or the consolidation of the furnish mix during handsheet formation. All three enzymes increased tensile stiffness index, which is a measure of the initial resistance of the handsheets to strain. Only the laccase preparation, an enzyme that modifies pulp lignin, consistently increased fibre bonding to enhance other strength properties of the handsheets.     

Immobilization of Trametes versicolor cultures for improving laccase production in bubble column reactor intensified by sonication

The mycelia of Trametes versicolor immobilized in alginate beads provided higher laccase production than that in pelleted form. An efficient ultrasonic treatment enhanced laccase production from the immobilized T. versicolor cultures. The optimized treatment process consisted of exposing 36-h-old bead cultures to 7-min ultrasonic treatments twice with a 12-h interval using a fixed ultrasonic power and frequency (120 W, 40 kHz). Using the intensification strategy with sonication, laccase production increased by more than 2.1-fold greater than the untreated control in both flasks and bubble column reactors. The enhancement of laccase production by ultrasonic treatment is related to the improved mass transfer of nutrients and product between the liquid medium and the gel matrix. These results provide a basis for the large-scale and highly-efficient production of laccase using sonobioreactors.     

Lauryl Gallate Inhibits the Activity of Protein Tyrosine Kinase c-Src Purified from Human Platelets

The inhibitory effect of gallic acid (3,4,5-trihydroxybenzoic acid), and its ester derivatives methyl, propyl, octyl and lauryl has been tested on the tyrosine kinase activity of affinity purified c-Src from human platelets, using the artificial substrate Poly (Glu.Na, Tyr) 4:1. When tested as inhibitor of the autophosphorylation of the enzyme and the phosphorylation of the protein tyrosine phosphatase SHP-1 by c-Src, lauryl gallate was found to be a more potent inhibitor than other widely used protein tyrosine kinase (PTK) inhibitors such as genistein and herbimycin A. However, lauryl gallate did not inhibit the activity of the serine threonine kinases protein kinase A (PKA) and casein kinase II (CKII) from rat brain.     

Lauryl gallate inhibits the activity of protein tyrosine kinase c-Src purified from human platelets

The inhibitory effect of gallic acid (3,4,5-trihydroxybenzoic acid), and its ester derivatives methyl, propyl, octyl and lauryl has been tested on the tyrosine kinase activity of affinity purified c-Src from human platelets, using the artificial substrate Poly (Glu,Na,Tyr) 4:1. When tested as inhibitor of the autophosphorylation of the enzyme and the phosphorylation of the protein tyrosine phosphatase SHP-1 by c-Src, lauryl gallate was found to be a more potent inhibitor than other widely used protein tyrosine kinase (PTK) inhibitors such as genistein and herbimycin A. However, lauryl gallate did not inhibit the activity of the serine threonine kinases protein kinase A (PKA) and casein kinase II (CKII) from rat brain.     

Modification of high-lignin softwood kraft pulp with laccase and amino acids

This study demonstrates the potential of laccase-facilitated grafting of amino acids to high-lignin content pulps to improve their physical properties in paper products. Research studies have recently reported that increases in anionic fiber charge can improve strength properties of paper. In an effort to increase carboxylic acid groups, we developed a unique two-stage laccase grafting protocol in which fibers were initially treated with laccase followed by grafting reactions with amino acids. The bulk acid group content was measured, and a variety of amino acids including glycine (Gly), phenylalanine (Phe), serine (Ser), arginine (Arg), histidine (His), alanine (Ala), and aspartic acid (Asp) were examined. The effects of optimizing laccase dose, and amino acid structures, on fiber modification chemistry were studied. Histidine provided the best yield of acid groups on pulp fiber, and was used for the preparation of handsheets for physical strength testing. Laccase-histidine treated pulp showed an increase in strength properties of the resulting paper.     

Effects of alkyl chain lengths of gallates upon enzymatic wool functionalisation

The covalent grafting of alkyl gallates on wool through a laccase catalysed reaction in 80/20 (v/v, %) aqueous–ethanol mixture provided in a one-step process a multifunctional textile material with antioxidant, antibacterial and water repellent properties. Gallic acid and its alkyl esters ethyl, propyl, octyl and dodecyl gallate have been enzymatically grafted on wool fibres in order to study the effect of alkyl chain length on wool functional modification. The capacity of laccase to oxidise these phenolic compounds in an aqueous–organic medium has been verified by electrochemical techniques. The increase of CH₂, CH₃ groups in the FTIR spectra, together with the XPS analysis of the enzymatically modified fabrics confirmed the covalent grafting of ester gallates on wool. The result obtained in this work for antibacterial, water repellent as well as antioxidant properties show that the length of the alkyl chain of gallates molecule play an important role on wool functionalisation.     

Wet strength improvement of unbleached kraft pulp through laccase catalyzed oxidation

Previous investigations have shown that laccase catalyzed oxidation of lignin containing wood fibers can enhance the strength of medium density fiberboards. In the present work it was investigated if laccase treatment had any impact on the tensile strength of a high yield unbleached kraft pulp. Treatment with laccase alone had only a very little effect on the wet strength of the pulp, whereas addition of lignin rich extractives increased the wet strength after the enzyme treatment significantly. A mediated oxidation gave a similar improvement of the wet tensile strength although no lignin was added to the fiber suspension. Furthermore, it was found that a heat treatment combined with a mediated oxidation gave a higher improvement in wet tensile strength than could be accounted for by the individual treatments. No change in dry tensile strength from the laccase treatment was observed. It is suggested that the observed improvement in wet tensile strength is related to polymerization of lignin on fibers in the hand sheet and/or coupling of phenoxy radicals on lignin associated to adjacent fibers. For the different mediators studied, a correlation was found between oxygen consumption upon mediated oxidation and generation of wet strength in the pulp.     

An investigation into the native-like properties of de novo designed cavitand-based four-helix bundle proteins

We investigated the hydrophobic packing of two previously designed caviteins, LG2 and LG3, which differ by one Gly in the linker regions between the peptide sequence and the cavitand scaffold. We sought to diminish the putative native-like properties of LG2 and LG3, and see if we could diagnose a change in the conformational specificity of the hydrophobic core. We replaced the leucine residues with norleucine residues at the hydrophobic positions in LG2 and LG3, to create NG2 and NG3, respectively. LG2 exhibited more dispersion, but less sharp signals than LG3 in the amide region of its (1)H NMR spectrum. NG3 and NG2 were found to be slightly less helical and significantly less stable toward guanidine hydrochloride compared with their reference caviteins. The (1)H NMR spectrum of NG2 was very similar to that of LG2, whereas there was a noticeable loss in the number and sharpness of the amide signals of NG3 compared with LG3. These data suggest that LG3 is very well packed; a loss in conformational specificity resulted from replacement of the leucine residues with norleucine residues. In contrast, the packing and dynamics of the hydrophobic core in LG2 were similar to those in NG2 (both more modest than LG3), as their (1)H NMR spectra were virtually indistinguishable. Overall, substitution of leucine by norleucine provided an efficient, convenient, and informative probe of the packing and dynamics of our caviteins' hydrophobic cores.     

The role of xylanases and laccases on hexenuronic acid and lignin removal

The variation of the contents in hexenuronic acids (HexA) and lignin in Eucalyptus kraft pulp during sequences with the laccase–mediator treatment with or without xylanase pretreatment was studied. The laccase–HBT system (HBT: 1-hydroxybenzotriazole) initially oxidized lignin alone but altered cellulose in the pulp as well after some time. Once all accessible lignin was removed, the system acted on HexA. As a result, the laccase–mediator treatment reduced the HexA content of the pulp, especially if a xylanase pretreatment was applied before. A previously unseen effect was observed here: HexA removal was found to depend on the laccase and HBT doses, but not on the reaction time. In addition, the xylanase pretreatment was found to strongly boost the effects of the laccase–HBT system by facilitating their access to HexA without affecting the lignin content.     

Effects of heating at neutral and acid pH on the structure of β-lactoglobulin A revealed by differential scanning calorimetry and circular dichroism spectroscopy

The structural change of β-lactoglobulin A (βLG A) on heating was measured at pH 3.0 and 7.5 with UV absorption difference spectra, differential scanning calorimetry (DSC), and circular dichroism (CD). At pH 3.0, βLG A showed a reversible structural change by heating at 80 °C, while an irreversible change was observed and molecular aggregates of βLG were formed by heating at 95 °C. DSC analysis of βLG A gave endothermic peaks at 75 °C and 90 °C at pH 7.5, and 90 °C at pH 3.0. At pH 7.5, βLG A modified with N-ethylmaleimide (NEM-βLG A) gave two endothermic peaks: at 72 °C and 90 °C. CD spectra of βLG A heated at various temperatures and pHs were measured and the spectra at pH 3.0 and 7.5 were not changed by heating to 95 °C and 80 °C, respectively. Unheated NEM-βLG A gave a spectrum similar to that of heated βLG A, suggesting that the secondary structure was changed by NEM treatment.     

Bacterial cellulose as carrier for immobilization of laccase: Optimization and characterization

Bacterial cellulose (BC) has attracted attention as a new functional material due to its excellent mechanical strength, tridimensional nanostructure, high purity, and increased water absorption, compared to plant cellulose. In this work, commercial laccase was immobilized on BC and the influence of enzyme concentration, contact time, and pH was optimized toward the recovery activity of immobilized laccase. This optimization was carried out using a 3³ experimental design and response surface methodology. Enzyme concentration played a critical role in laccase immobilization. Under optimized conditions (0.15 μL L^?1 of enzyme concentration, 4.8 h of contact time, pH 5.4), the predicted and experimental response were equal to 47.88 and 49.30%, respectively. The thermal stability of the immobilized laccase was found to increase notably at 60 and 70°C presenting stabilization factor equal to 1.79 and 2.11, respectively. The immobilized laccase showed high operational stability, since it retained 86% of its initial activity after seven consecutive biocatalytic cycles of reaction with 2,2′‐azinobis‐(3‐ethylbenzothiazoline‐6‐sulfonic acid). Kinetic studies showed that the values of Michaelis–Menten constant and maximum reaction rate decreased upon immobilization (9.9‐ and 1.6‐fold, respectively). Globally, the use of immobilized laccase on BC offers an interesting tool for industrial biocatalytic applications.