Genetic organization of insertion element IS2 based on a revised nucleotide sequence

We identified a transposable element resident in the chromosome of Escherichia coli K-12 strain HB101. This is an approx. 4400-bp-long transposon flanked by two copies of insertion sequence (IS) 1 element in direct orientation. One of the IS1 elements was found to be integrated into an IS2 element between IS2 bp 139 and bp 140 with the large moiety of IS2 within the transposon. The sequence of this part of IS2 differs from the published sequence of galOP-308::IS2 at a number of positions. Restriction analysis of the published allele, however, indicated that both alleles may in fact be identical. Since six of the eight differences found alter open reading frames, the revised sequence presents a new outlook for the potential genetic organization of IS2.     

Nucleotide sequence of IS26, a new prokaryotic mobile genetic element.

The DNA sequence of a new IS element, the IS26, is 820 bp long and carries 14 bp perfect terminal inverted repeats. Upon integration, IS26 generates an 8 bp duplication of its target sequence. A large open reading frame within IS26 could code for a protein of 234 amino acids. On its reverse strand, IS26 also carries one large open reading frame, 591 bp long, which contains no stop codon within IS26.     

Identification, distribution, and sequence analysis of new insertion elements in Caulobacter crescentus.

We describe two insertion elements isolated from Caulobacter crescentus that are designated IS298 and IS511. These insertion elements were cloned from spontaneous flagellar (fla) gene mutants SC298 and SC511 derived from the wild-type strain CB15 (ATCC 19089), in which they were originally identified as insertions in the flbG operon of the hook gene cluster (N. Ohta, E. Swanson, B. Ely, and A. Newton, J. Bacteriol. 158:897-904, 1984). IS298 and IS511 were each present in C. crescentus CB2 and CB15 in at least four different positions, but neither was present in strain CB13 or in several Caulobacter species examined, including C. vibrioides, C. leidyia, and C. henricii. Nucleotide sequence analysis across the chromosome-insertion element junctions showed that IS298 is located 152 base pairs (bp) upstream from the ATG translation start of the hook protein gene flaK, where it is bounded by a 4-bp direct repeat derived from the site of insertion, and that IS511 is inserted at codon 186 of the flaK coding sequence, where it is also bounded by a 4-bp direct repeat duplicated from the site of insertion. The ilvB102 mutation in strain SC125 was also shown to result from insertion sequence IS511, but no duplication of the genomic sequence was present at the insertion element junctions. IS298 contains an imperfect terminal inverted repeat 16 bp long, and IS511 contains a 32-bp inverted repeat at the termini. IS298 and IS511 are the first insertion elements described in C. crescentus.     

IS200: a Salmonella-specific insertion sequence

A new IS element (IS200) has been identified in Salmonella. The sequence was identified as an IS element by the following criteria: its insertion caused the mutation hisD984; six copies of the sequence are present in strain LT2 of S. typhimurium; and transposition of the sequence has been observed on several occasions. IS200 is found in almost all Salmonella species examined but is absent from most other enteric bacteria. The specificity of this element for Salmonella (and the absence of IS1-IS4 from Salmonella) suggest that transfer of insertion sequences between bacterial groups may be less extensive than is commonly believed. Alternatively, the distribution may suggest that these elements play a selectively important role in bacteria.     

IS431, a staphylococcal insertion sequence-like element related to IS26 from Proteus vulgaris

We present the nucleotide sequence of IS431, a new staphylococcal insertion sequence-like element flanking the mercury-resistance determinant of pI524 and associated with the methicillin-resistance determinant. IS431 left is 800 bp long and has a perfect terminal inverted repeat (IR) of 22 bp; IS431 right is 786 bp long and has a terminal IR homologous to the IR of IS431 left except that the terminal 8 bp are absent. Both IRs share a 10-bp homology with the IR of IS26 from Proteus vulgaris. No directly repeated sequences were detected immediately adjacent to the IRs. An open reading frame (ORF) of 675 bp spans most of the IS431 sequence. Its deduced amino acid (aa) sequence shows 40% homology to the 234-aa-long putative transposase coded by ORFI of IS26.     

A new insertion sequence, IS231M, in an autoagglutinable isolate of Bacillus thuringiensis

An insertion sequence was isolated from an autoagglutinable strain of Bacillus thuringiensis. Analysis of its DNA sequence revealed high homology to the IS231 family. The name IS231M is proposed for this new insertion sequence. IS231M is 1652 bp long and is delimited by two imperfect 20-bp inverted repeat sequences with two mismatches, which are flanked by two perfect 11-bp direct repeats (DRs). The region upstream of the open reading frame, presumed to be able to form a stable hairpin structure, is particularly well conserved in IS231M. Based on primary nucleotide sequences, IS231M is most homologous to IS231F and IS231G and most distant from IS231V and IS231W. However, as opposed to the single transposase A ORF found in IS231A, -B, -C, -D, -F, and -G, IS231M has two overlapping open reading frames, ORF1 and ORF2, that could code for polypeptides of 334 and 143 amino acids, respectively. Whether IS231M is a functional transposable element remains to be determined.     

Isolation of a new insertion element of Yersinia intermedia closely related to remnants of mobile genetic elements present on Yersinia plasmids harboring the Yop virulon

A new insertion element present in two alleles, designated IS1635.1 and IS1635.2, was identified on a plasmid of a Yersinia intermedia strain by hybridization with the Yersinia enterocolitica pYV virulence plasmid. IS1635.1 and IS1635.2 are 861 bp long, carry imperfect inverted terminal repeats and possess a single open reading frame encoding a putative transposase of the IS6 family. A truncated IS1635 element is present immediately downstream of element IS1635.2. The capacity of the IS1635 elements to mediate transposition in Yersinia was demonstrated with a R6K-derived suicide vector, where a kanamycin resistance gene had been inserted between IS1635.1 and IS1635.2. Hybridization and sequence alignments showed that remnants of IS1635-like insertion elements harboring large deletions and point mutations are present on the Yop virulon harboring plasmids of pathogenic Yersinia strains. In a few cases, the IS1635 element has also been found on plasmids of apathogenic Yersinia strains.     

Identification of an insertion sequence, IS1081, in Mycobacterium bovis

Abstract: An insertion sequence, IS1081, in the genome of Mycobacterium bovis has been identified and sequenced. It is 1324 bp long with 15 bp inverted repeat ends and contains a large ORF. There are six copies of IS1081 in the genome of M. bovis and the element is also present in Mycobacterium tuberculosis . IS1081 is not closely related to other DNA elements described in actinomycetes but its putative transposase bears some resemblance to that of IS256 from Staphylococcus aureus . IS1081 may be useful for genetic manipulations and for developing a diagnostic test for bovine tuberculosis based on the polymerase chain reaction.     

Characterization of a Mycobacterium tuberculosis insertion sequence belonging to the IS3 family

A repetitive element (IS986), previously isolated from Mycobacterium tuberculosis and shown to detect multiple restriction fragment-length polymorphisms (RFLPs), has been sequenced. It consists of a potential insertion sequence of 1358bp, with 30-bp inverted repeat ends. IS986 has four potentially significant open reading frames (ORFs): ORFa1, ORFa2 and ORFb on one strand and ORFc on the complementary strand. The sequences of the potential translated products identify IS986 as a member of the IS3 family, with an apparent frameshift between ORFa1 and ORFa2. IS986 has potential as a highly specific probe for detection and typing of M. tuberculosis, as well as for transposon mutagenesis of mycobacteria. The sequence of IS986 is virtually identical to that of another recently described element, IS6110 (Thierry et al., 1990).     

Transposition and target specificity of the typical IS30 family element IS1655 from Neisseria meningitidis

We have analysed the transposition and target selection strategy of IS1655, a typical IS30 family member resident in Neisseria meningitidis. We have redefined IS1655 as a 1080 bp long element with 25 bp imperfect inverted repeats (IRs), which generates a 3 bp target duplication and have shown that it transposes using an intermediate with abutted IRs separated by 2 bp. IS1655 exhibits bipartite target specificity inserting preferentially either next to sequences similar to its IRs or into an unrelated but well defined sequence. IR-targeting leads to the formation of a new junction in which the targeted IR and one of the donor IRs are separated by 2 bp. The non-IR targets were characterized as an imperfect 19 bp palindrome in which the central five positions show slight GC excess and the distal region is AT-rich. Artificial targets designed according to the consensus were recognized by the element as hot spots for insertion. The organization of IS1655 is similar to that of other IS30 family members. Moreover, it shows striking similarity to IS30 in transposition strategy even though their transposases differ in their N-terminal regions, which, for IS30, appears to determine target specificity. Comparative analysis of the transposases and the evolutionary aspects of sequence variants are also briefly discussed.     

Target specificity of insertion element IS30

The Escherichia coli resident mobile element IS 30 has pronounced target specificity. Upon transposition, the element frequently inserts exactly into the same position of a preferred target sequence. Insertion sites in phages, plasmids and in the genome of E. coli are characterized by an exceptionally long palindromic consensus sequence that provides strong specificity for IS 30 insertions, despite a relatively high level of degeneracy. This 24-bp-long region alone determines the attractiveness of the target DNA and the exact position of IS 30 insertion. The divergence of a target site from the consensus and the occurrence of 'non-permitted' bases in certain positions influence the target activity. Differences in attractiveness are emphasized if two targets are present in the same replicon, as was demonstrated by quantitative analysis. In a system of competitive targets, the oligonucleotide sequence representing the consensus of genomic IS 30 insertion sites proved to be the most efficient target. Having compared the known insertion sites, we suppose that IS 30 -like target specificity, which may represent an alternative strategy in target selection among mobile elements, is characteristic of the insertion sequences IS 3 , IS 6 and IS 21 , too.     

Transposition in Shigella dysenteriae: isolation and analysis of IS911, a new member of the IS3 group of insertion sequences.

Twenty-nine clear-plaque mutants of bacteriophage lambda were isolated from a Shigella dysenteriae lysogen. Three were associated with insertions in the cI gene: two were due to insertion of IS600, and the third resulted from insertion of a new element, IS911. IS911 is 1,250 base pairs (bp) long, carries 27-bp imperfect terminal inverted repeats, and generates 3-bp duplications of the target DNA on insertion. It was found in various copy numbers in all four species of Shigella tested and in Escherichia coli K-12 but not in E. coli W. Analysis of IS911-mediated cointegrate molecules indicated that the majority were generated without duplication of IS911. They appeared to result from direct insertion via one end of the element and the neighboring region of DNA, which resembles a terminal inverted repeat of IS911. Nucleotide sequence analysis revealed that IS911 carries two consecutive open reading frames which code for potential proteins showing similarities to those of the IS3 group of elements.     

Sequence and characteristics of IS900, an insertion element identified in a human Crohn''s disease isolate of Mycobacterium paratuberculosis.

The complete sequence of an insertion element IS900 in Mycobacterium paratuberculosis is reported. This is the first characterised example of a mycobacterial insertion element. IS900 consists of 1451bp of which 66% is G + C. It lacks terminal inverted and direct repeats, characteristic of Escherichia coli insertion elements but shows a degree of target sequence specificity. A single open reading frame (ORF 1197) coding for 399 amino acids is predicted. This amino acid sequence, and to a lesser extent the nucleotide sequence, show significant homologies to IS110, an insertion element of Streptomyces coelicolor A3(2). It is proposed that IS900, IS110, and similar insertion elements recently identified in disease isolates of Mycobacterium avium are members of a phylogenetically related family. IS900 will provide highly specific markers for the precise identification of Mycobacterium paratuberculosis, useful in defining its relationship to animal and human diseases.     

Deletions and DNA rearrangements within the transposable DNA element IS2. A model for the creation of palindromic DNA by DNA repair synthesis.

Three derivatives of mutant ga10P-308::IS2-I of Escherichia coli were characterized by DNA sequence analysis. Deletions and DNA sequence rearrangements were observed which apparently were initiated at short A-T rich inverted repeats within IS2. Two of the mutants carried newly synthesized DNA sequences which were inverted copies of already existing IS2 sequences. Thus long stretches with twofold symmetry were formed. It is discussed whether these inverted repeats were formed by DNA repair synthesis which was initiated at the A-T rich palindromes of IS2.     

Isolation of an insertion sequence (IS1051) from Xanthomonas campestris pv. dieffenbachiae with potential use for strain identification and characterization.

A new insertion sequence was isolated from Xanthomonas campestris pv. dieffenbachiae. Sequence analysis showed that this element is 1,158 bp long and has 15-bp inverted repeat ends containing two mismatches. Comparison of this sequence with sequences in data bases revealed significant homology with Escherichia coli IS5. IS1051, which detected multiple restriction fragment length polymorphisms, was used as a probe to characterize strains from the pathovar dieffenbachiae.     

Bacterial Interspersed Mosaic Elements (Bimes) Are a Major Source of Sequence Polymorphism in Escherichia Coli Intergenic Regions Including Specific Associations with a New Insertion Sequence

A significant fraction of Escherichia coli intergenic DNA sequences is composed of two families of repeated bacterial interspersed mosaic elements (BIME-1 and BIME-2). In this study, we determined the sequence organization of six intergenic regions in 51 E. coli and Shigella natural isolates. Each region contains a BIME in E. coli K-12. We found that multiple sequence variations are located within or near these BIMEs in the different bacteria. Events included excisions of a whole BIME-1, expansion/deletion within a BIME-2 and insertions of non-BIME sequences like the boxC repeat or a new IS element, named IS1397. Remarkably, 14 out of 14 IS1397 integration sites correspond to a BIME sequence, strongly suggesting that this IS element is specifically associated with BIMEs, and thus inserts only in extragenic regions. Unlike BIMEs, IS1397 is not detected in all E. coli isolates. Possible relationships between the presence of this IS element and the evolution of BIMEs are discussed.