白腐菌木质素降解酶及其在木质素降解过程中的相互作用

木质素是一类不易降解的生物物质,在自然界中,白腐真菌对木质素的降解能力最强.白腐真菌降解木质素主要依靠分泌的三种酶:木质素过氧化物酶(Lip)、锰过氧化物酶(MnP)和漆酶(Lac).对白腐真菌分泌的三种木质素降解酶在性质、分布等方面进行了比较,系境地介绍三种木质素降解酶的催化作用,并阐述其在木质素降解过程中的相互作用.     

过氧化物酶体降解与疾病

过氧化物酶体是细胞中一种参与脂肪酸代谢、缩醛磷脂合成和氧化应激等功能的细胞器,其数量会根据细胞和细胞所处微环境的不同而发生变化,这种变化又与过氧化物酶体本身的降解密切相关.虽然一直以来,过氧化物酶体都被线粒体的光芒所掩盖,但是近年来,随着过氧化物酶体研究的逐渐增多,人们对于过氧化物酶体的降解也有了更全面的了解.本文主要...     

黄孢原毛平革菌木素过氧化物酶类在天然木素降解中作用的研究

通过诱变得到十一株木素过氧化物酶酶活降低的黄孢原毛平革菌（Ｐｈａｎｅｒｏｃｈａｅｔｅｃｈｒｙｓｏｓｐｏｒｉｕｍ）突变株,用灰色理论分析了其木素过氧化物酶类的产生与木素降解能力间的相关性,并从中筛选到一株木素过氧化物酶缺陷、锰过氧化物酶酶活明显降低的突变株,其木素降解能力为原始菌株的８０％左右。该菌粗酶液作用于纤维素酶酶解杉木木素和天然褐腐木素,可产生小分子的木素降解产物,此反应不需Ｈ２Ｏ２参与。红外光谱分析表明粗酶液对木素的作用主要为氧化作用,因此推测此突变株粗酶液中含有不同于木素过氧化物酶和锰过氧化物酶的与木素氧化降解有关的酶类     

木质素降解酶及相关基因研究进展

生物质的高效综合利用已成为全球关注的热点问题。生物质的主要成分是木质素、纤维素和半纤维素,其利用的关键是如何去除木质素,从而提高纤维素和半纤维素的得率。其中利用真菌的生物预处理方法因条件温和、无二次污染等优点符合全球经济可持续发展需要,受到研究者的普遍关注。综述了近年国内外真菌分泌的主要木质素降解酶,包括木质素过氧化物酶(Li P)、锰过氧化物酶(Mn P)、漆酶(laccase)和多功能过氧化物酶(VP)的主要特点,总结了木质素降解相关酶的基因工程、基因组学的研究成果,并对其发展前景进行了展望。     

毛木耳对孔雀石绿染料降解条件的优化

随着我国印染工业的发展,废水对生态环境的危害日趋严重,亟需开发一种脱色明显且成本低廉的降解方法。本研究发现毛木耳Auricularia cornea菌株AC5对不同结构的染料均具有一定的降解作用,尤其是三苯甲烷类染料。利用26℃、160r/min振荡培养7d的粗酶液对染料（75.0mg/L）进行12h降解,结果显示三苯甲烷染料孔雀石绿、结晶紫,蒽醌染料活性蓝19和偶氮染料活性蓝222的降解效率分别为83.27%、71.77%、67.81%和63.92%。染料降解实验和酶活力测定结果表明,毛木耳对孔雀石绿的降解率达到最高时漆酶活性最高,为321.0U/mL,木质素过氧化物酶和锰过氧化物酶活性较低。因此,推测在降解过程中漆酶起到主要作用。研究表明利用毛木耳菌丝发酵液降解染料废水成本低且操作方便,为染料废水的降解研究提供了前期基础。     

藜芦醇和吐温80对白腐菌产木质素降解酶的影响及在偶氮染料脱色中的作用

担子菌PM2在限氮液体培养下,分泌木质素过氧化物酶和锰过氧化物酶;藜芦醇、吐温 80的补充,提高了该菌锰过氧化物酶的产生,获得的最大锰过氧化物酶Mnp酶活为254.2u/L、190.2 u/L,分别是对照的3.4倍和2.5倍。选择三种偶氮染料,在染料体系下,进一步分析藜芦醇、吐温 80对担子菌PM2产过氧化物酶及染料脱色的影响。结果表明,担子菌PM2分泌的锰过氧化物酶Mnp与染料脱色有关,脱色程度受其分子结构特征影响;吐温80的补充,更有利于染料的脱色降解,48h后三种染料均可达到80%以上的脱色率。     

粗毛栓菌胞外锰过氧化物酶的纯化及性质

培养于麦草粉上的白腐担子菌粗毛栓菌分泌胞外木质纤维素降解酶(纤维素酶、木聚糖酶、漆酶、锰过氧化物酶和木质素过氧化物酶)。经过超滤、盐析、离子交换层析、凝胶过滤和活性聚丙烯酰胺凝胶电泳等步骤,获得了初步纯化的锰过氧化物酶组分。利用变性聚丙烯酰胺凝胶电泳和等电点聚焦技术所测定的锰过氧化物酶的相对分子质量和等电点分别为35.7 ku和pI 2.8。研究结果表明,所纯化的锰过氧化物酶在407nm处具有最大光吸收峰,该酶最适作用pH值和温度分别为pH 5.3和35℃。     

过氧化物酶体的稳态维持机制与膜接触位点

过氧化物酶体是保守存在于真核生物中的一种细胞器,参与多种生化代谢过程,包括脂肪酸β氧化反应、活性氧的产生和降解等。过氧化物酶体在生物发生和应对环境胁迫过程中,通过数量和时空分布的规律性动态变化,实现质量控制,以维持其生化代谢的稳态,从而保持机体的正常生命活动。同时,作为真核细胞的代谢枢纽,过氧化物酶体功能的正常发挥与稳态维持需要与其他细胞器相互协作。过氧化物酶体膜接触位点在过氧化物酶体与各细胞器相互连接和交流中发挥着重要作用。近年来,过氧化物酶体稳态维持机制和膜接触位点的组成和功能成为国内外相关研究的热点,本文对相关研究的进展进行了综述。     

野生型糙皮侧耳Pleurotus ostreatus JY2746对合成染料脱色性能的评价（英文）

随着我国印染工业的不断发展,人工合成染料给环境造成严重污染,现急需开发一种成本低廉、脱色效果显著的方法治理水污染问题。本研究发现糙皮侧耳的胞外粗酶液对5种合成染料均具有良好的脱色作用,其中对结晶紫、酸性品红和考马斯亮蓝G-250(浓度为40mg/L)的最高脱色率可分别达到100%、98.67%和92.5%。糙皮侧耳在液体发酵过程中主要产生3种酶类,即漆酶、锰过氧化物酶和木质素过氧化物酶,他们分别在第12天,第7天和第8天酶活达到最高,并且第12天产生的粗酶液对染料的脱色效果最好,根据酶活高峰形成时间与脱色率之间的关系,推测糙皮侧耳分泌的漆酶对染料起主要降解作用,而锰过氧化物酶和木质素过氧化物酶起辅助作用。本研究发现发酵粗酶液较纯化的酶类工艺简单,成本低廉,因此糙皮侧耳发酵液中提取的粗酶液在染料废水脱色处理方面具有潜在的应用价值。     

乳过氧化物酶体系及其在乳品保鲜中的应用

本文主要介绍了乳中的一种天然抗菌活性体系—乳过氧化物酶体系(LPS),该体系由乳过氧化物酶、硫氰酸盐(SCN_)和过氧化氢(H2O2)共同组成。该体系3组分的浓度分别不低于0．5 ppm,12 ppm和8．5 ppm时,可表现出显著的抗菌效果;在30℃、25℃、20℃、15℃和3-5℃条件下,乳的保鲜期可分别达到7天、11天、16天、24天和120天。本文还介绍了乳过氧化物酶体系在乳品保鲜中的实际应用,对其应用前景进行了展望。     

锰过氧化物酶的结构与功能

综述了木素降解的关键酶之一锰过氧化物酶的三维分子结构和催化反应性能,综合概述了通过定点诱变等方法对锰过氧化物酶的结构和功能的研究进展。     

Isolation of Bacterial Strain from Sediment Core of Pulp and Paper Mill Industries for Production and Purification of Lignin Peroxidase (LiP) Enzyme

Five bacterial strains were isolated and purified (CSA101 to CSA105) from the sediment core of the effluent released from the Century Pulp and Paper Mill Ltd., India. These strains were grown in minimal salt medium (MSM) containing pulp (10% as a carbon source). The production of lignin peroxidase, CMCase, Fpase, and xylanase together with protein and reducing sugar by all bacterial strains was observed. All of the bacterial isolates responded differently with respect to growth and ligninocellulolytic enzyme production. The maximum lignin peroxidase (LiP) was obtained from the cell extract of Bacillus sp. (CSA105) strain, which was used for purification, fractionation and characterization. The culture filtrate from Bacillus sp. (CSA105) was purified with ammonium sulfate precipitation. Crude protein was desalted by dialyzing with Tris buffer. The lignolytic enzyme produced in the liquid medium was fractionated by gel filtration on Sephadex G-100. In the present study, 12.4-fold purification of LiP enzyme was obtained and 35.85% yield of lignin peroxidase was achieved in the cell extract of Bacillus sp. (CSA105). Lignin peroxidase enzyme plays an important role in lignin degradation process. The ligninolytic enzymes were produced by all of the bacterial strains but maximum lignin peroxidase activity was found in cell extract of CSA105. On the basis of the results obtained, the bacterial strain (CSA105) was found most suitable for the purification of the LiP enzyme.     

The selective visualization of lignin peroxidase,manganese peroxidase and laccase,produced by white rot fungi on solid media

A visual method for the selective screening of lignin degrading enzymes, produced by white rot fungi (WRF), was investigated by the addition of coloring additives to solid media. Of the additives used in the enzyme production media, guaiacol and RBBR could be used for the detection of lignin peroxidase (LiP), manganese peroxidase (MnP) and laccase. Syringaldazine and Acid Red 264 were able for the detection of both the MnP and laccase, and the LiP and laccase, respectively, and a combination of these two additives was able to detect each of the ligninases produced by the WRF on solid media.     

Lignin-modifying enzymes from selected white-rot fungi: production and role from in lignin degradation

Abstract: White-rot fungi produce extracellular lignin-modifying enzymes, the best characterized of which are laccase (EC 1.10.3.2), lignin peroxidases (EC 1.11.1.7) and manganese peroxidases (EC 1.11.1.7). Lignin biodegradation studies have been carried out mostly using the white-rot fungus Phanerochaete chrysosporium which produces multiple isoenzymes of lignin peroxidase and manganese peroxidase but does not produce laccase. Many other white-rot fungi produce laccase in addition to lignin and manganese peroxidases and in varying combinations. Based on the enzyme production patterns of an array of white-rot fungi, three categories of fungi are suggested: (i) lignin-manganese peroxidase group (e.g. P. chrysosporium and Phlebia radiata ), (ii) manganese peroxidase-laccase group (e.g. Dichomitus squalens and Rigidoporus lignosus ), and (iii) lignin peroxidase-laccase group (e.g. Phlebia ochraceofulva and Junghuhnia separabilima ). The most efficient lignin degraders, estimated by ¹⁴CO₂ evolution from ¹⁴C-[Ring]-labelled synthetic lignin (DHP), belong to the first group, whereas many of the most selective lignin-degrading fungi belong to the second, although only moderate to good [¹⁴C]DHP mineralization is obtained using fungi from this group. The lignin peroxidase-laccase fungi only poorly degrade [¹⁴C]DHP.     

Enhanced lignin peroxidase synthesis by Phanerochaete Chrysosporium in solid state bioprocessing of a lignocellulosic substrate

Summary A solid state fermentation (SSF) process for the production of lignin peroxidase was optimized to enhance enzyme production by Phanerochaete chrysosporium. Optimization of the corncob SSF medium caused a significant reduction in fermentation time to give maximum lignin peroxidase yield. Supplementation of the SSF medium by low concentrations of peptone, yeast extract and Tween-80 enhanced lignin peroxidase production. Maximum yield of lignin peroxidase was 13.7 U/gds (units per gram dry substrate) noted after 5 days of SSF with 70% moisture and 20% (v/w) inoculum.     

Polymerisation of lignins by ligninases from Phanerochaete chrysosporium

Abstract Four major hemoproteins were purified by isoelectric focusing from an extracellular crude enzyme preparation, produced by the white rot fungus Phanerochaete chrysosporium under carbon-limited conditions. Both the crude enzyme and the purified proteins oxidised milled wood lignin, HCl-dioxane-extracted straw lignin and alkali straw lignin in the presence of hydrogen peroxide. The oxidation resulted mainly in further polymerisation of the lignins and was enhanced by addition of veratryl alcohol to the reaction mixture. Alkali straw lignin was also polymerised by horseradish peroxidase, although veratryl alcohol had no influence on this reaction.     

Gravitational stress and lignification in aerial vs. submerged shoots of Hippuris vulgaris

Hippuris vulgaris L. is a heterophyllic aquatic plant that grows naturally under the different degrees of gravitational stress that are associated with submerged and aerial environments. This characteristic of H. vulgaris was exploited in order to study the interaction of gravitational stress with lignification processes. Lignin content was found to be 4.1% of aerial stem dry weight and 2.6% of submerged stem dry weight. The activity of phenylalanine ammonia-lyase (E.C. 4.3.1.5), an enzyme early in the lignin biosynthetic pathway, paralleled lignin content and was about 5 times higher in aerial than in submerged stems. Another lignin biosynthetic enzyme, peroxidase (E.C. 1.11.1.7), was studied, and although definite conclusions could not be drawn from measurements of total peroxidase activity, different isozyme patterns were observed in aerial and submerged-type shoots. Abscisic acid, which can induce the aerial-type shoot morphology on submerged shoots, probably is not involved in mediating changes in the lignin content of H. vulgaris . These results support the hypothesis that lignin biosynthesis is regulated by gravity.