Production of a recombinant polyester-cleaving hydrolase from Thermobifida fusca in Escherichia coli

The hydrolase (Thermobifida fusca hydrolase; TfH) from T. fusca was produced in Escherichia coli as fusion protein using the OmpA leader sequence and a His₆ tag. Productivity could be raised more than 100-fold. Both batch and fed-batch cultivations yield comparable cell specific productivities whereas volumetric productivities differ largely. In the fed-batch cultivations final rTfH concentrations of 0.5 g L⁻¹ could be achieved. In batch cultivations the generated rTfH is translocated to the periplasm wherefrom it is completely released into the extracellular medium. In fed-batch runs most of the produced rTfH remains as soluble protein in the cytoplasm and only a fraction of about 35% is translocated to the periplasm. Migration of periplasmic proteins in the medium is obviously coupled with growth rate and this final transport step possibly plays an important role in product localization and efficacy of the Sec translocation process.     

Kinetic models for astaxanthin production by high cell density mixotrophic culture of the microalga Haematococcus pluvialis

High cell density cultivation of Haematococcus pluvialis for astaxanthin production was carried out in batch and fed-batch modes in 3.7-L bioreactors with stepwise increased light intensity control mode. A high cell density of 2.65 g L⁻¹ (batch culture) or 2.74 g L⁻¹ (fed-batch culture) was obtained, and total astaxanthin production in the fed-batch culture (64.36 mg L⁻¹) was about 20.5% higher than in the batch culture (53.43 mg L⁻¹). An unstructured kinetic model to describe the microalga culture system including cell growth, astaxanthin formation, as well as sodium acetate consumption was proposed. Good agreement was found between the model predictions and experimental data. The models demonstrated that the optimal light intensity for mixotrophic growth of H. pluvialis in batch or fed-batch cultures in a 3.7-L bioreactor was 90–360 μmol m⁻² s⁻¹, and that the stepwise increased light intensity mode could be replaced by a constant light intensity mode. Received 24 December 1998/ Accepted in revised form 23 April 1999     

A process for the production of ectoine and poly(3-hydroxybutyrate) by <Emphasis Type="Italic">Halomonas boliviensis</Emphasis>

The paper reports a study involving the use of Halomonas boliviensis, a moderate halophile, for co-production of compatible solute ectoine and biopolyester poly(3-hydroxybutyrate) (PHB) in a process comprising two fed-batch cultures. Initial investigations on the growth of the organism in a medium with varying NaCl concentrations showed the highest level of intracellular accumulation of ectoine (0.74 g L⁻¹) at 10–15% (w/v) NaCl, while at 15% (w/v) NaCl, the presence of hydroxyectoine (50 mg L⁻¹) was also noted. On the other hand, the maximum cell dry weight and PHB concentration of 10 and 5.8 g L⁻¹, respectively, were obtained at 5–7.5% (w/v) NaCl. A process comprising two fed-batch cultivations was developed—the first culture aimed at obtaining high cell mass and the second for achieving high yields of ectoine and PHB. In the first fed-batch culture, H. boliviensis was grown in a medium with 4.5% (w/v) NaCl and sufficient levels of monosodium glutamate, NH₄⁺, and PO₄³⁻. In the second fed-batch culture, the NaCl concentration was increased to 7.5% (w/v) to trigger ectoine synthesis, while nitrogen and phosphorus sources were fed only during the first 3 h and then stopped to favor PHB accumulation. The process resulted in PHB yield of 68.5 wt.% of cell dry weight and volumetric productivity of about 1 g L⁻¹ h⁻¹ and ectoine concentration, content, and volumetric productivity of 4.3 g L⁻¹, 7.2 wt.%, and 2.8 g L⁻¹ day⁻¹, respectively. At salt concentration of 12.5% (w/v) during the second cultivation, the ectoine content was increased to 17 wt.% and productivity to 3.4 g L⁻¹ day⁻¹.     

Glucoamylase production in batch, chemostat and fed-batch cultivations by an industrial strain of Aspergillus niger

The Aspergillus niger strain BO-1 was grown in batch, continuous (chemostat) and fed-batch cultivations in order to study the production of the extracellular enzyme glucoamylase under different growth conditions. In the pH range 2.5–6.0, the specific glucoamylase productivity and the specific growth rate of the fungus were independent of pH when grown in batch cultivations. The specific glucoamylase producivity increased linearly with the specific growth rate in the range 0–0.1 h⁻¹ and was constant in the range 0.1–0.2 h⁻¹. Maltose and maltodextrin were non-inducing carbon sources compared to glucose, and the maximum specific growth rate was 0.19 ± 0.02 h⁻¹ irrespective of whether glucose or maltose was the carbon source. In fed-batch cultivations, glucoamylase titres of up to 6.5 g l⁻¹ were obtained even though the strain contained only one copy of the glaA gene. Received: 5 May 1999 / Received revision: 7 September 1999 / Accepted: 17 September 1999     

Kinetic models for phycocyanin production by high cell density mixotrophic culture of the microalga Spirulina platensis

Phycocyanin production by high cell density cultivation of Spirulina platensis in batch and fed-batch modes in 3.7-L bioreactors with a programmed stepwise increase in light intensity program was investigated. The results showed that the cell density in fed-batch culture (10.2 g L⁻¹) was 4.29-fold that in batch culture (2.38 g L⁻¹), and the total phycocyanin production in the fed-batch culture (0.795 g L⁻¹) was 3.05-fold that in the batch culture (0.261 g L⁻¹). An unstructured kinetic model to describe the microalga culture system including cell growth, phycocyanin formation, as well as glucose consumption was proposed. The data fitted the models well (r ² > 0.99). Furthermore, based on the kinetic models, the potential effects of light limitation and photoinhibition on cell growth and phycocyanin formation can be examined in depth. The models demonstrated that the optimal light intensity for mixotrophic growth of Spirulina platensis in batch or fed-batch cultures using a 3.7-L bioreactor was 80160 μE m⁻² s⁻¹, and the stepwise increase in light intensity can be replaced by a constant light intensity mode. Received 28 July 1998/ Accepted in revised form 8 October 1998     

Ethanol production from sweet sorghum juice in batch and fed-batch fermentations by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Sweet sorghum juice supplemented with 0.5% ammonium sulphate was used as a substrate for ethanol production by Saccharomyces cerevisiae TISTR 5048. In batch fermentation, kinetic parameters for ethanol production depended on initial cell and sugar concentrations. The optimum initial cell and sugar concentrations in the batch fermentation were 1 × 10⁸ cells ml⁻¹ and 24 °Bx respectively. At these conditions, ethanol concentration produced (P), yield (Y _ps) and productivity (Q _p ) were 100 g l⁻¹, 0.42 g g⁻¹ and 1.67 g l⁻¹ h⁻¹ respectively. In fed-batch fermentation, the optimum substrate feeding strategy for ethanol production at the initial sugar concentration of 24 °Bx was one-time substrate feeding, where P, Y _ps and Q _p were 120 g l⁻¹, 0.48 g g⁻¹ and 1.11 g l⁻¹ h⁻¹ respectively. These findings suggest that fed-batch fermentation improves the efficiency of ethanol production in terms of ethanol concentration and product yield.     

Mineralization of pentachlorophenol in a contaminated soil by Pseudomonas sp UG30 cells encapsulated in κ-carrageenan

A fermentation process in Escherichia coli for production of supercoiled plasmid DNA for use as a DNA vaccine was developed using an automated feed-back control nutrient feeding strategy based on dissolved oxygen (DO) and pH. The process was further automated through a computer-aided data processing system to regulate the cell growth rate by controlling interactively both the nutrient feed rate and agitation speed based on DO. The process increased the total yield of the plasmid DNA by approximately 10-fold as compared to a manual fed-batch culture. The final cell yield from the automated process reached 60 g L⁻¹ of dry cell weight (OD₆₀₀ = 120) within 24 h. A plasmid DNA yield of 100 mg L⁻¹ (1.7 mg g⁻¹ cell weight) was achieved by using an alkaline cell lysis method. Plasmid yield was confirmed using High Performance Liquid Chromatography (HPLC) analysis. Because cells had been grown under carbon-limiting conditions in the automated process, acetic acid production was minimal (below 0.01 g L⁻¹) throughout the fed-batch stage. In contrast, in the manual process, an acid accumulation rate as high as 0.36 g L⁻¹ was observed, presumably due to the high nutrient feed rates used to maintain a maximum growth rate. The manual fed-batch process produced a low cell density averaging 10–12 g L⁻¹ (OD₆₀₀ = 25–30) and plasmid yields of 5–8 mg L⁻¹ (approximately 0.7 mg g⁻¹ cells). The improved plasmid DNA yields in the DO- and pH-based feed-back controlled process were assumed to be a result of a combination of increased cell density, reduced growth rate (μ) from 0.69 h⁻¹ to 0.13 h⁻¹ and the carbon/nitrogen limitation in the fed-batch stage. The DO- and pH-based feed-back control, fed-batch process has proven itself to be advantageous in regulating cell growth rate to achieve both high cell density and plasmid yield without having to use pure oxygen. The process was reproducible in triplicate fermentations at both 7-L and 80-L scales. Received 22 March 1996/ Accepted in revised form 20 September 1996     

Poly(3-hydroxybutyrate) synthesis from glycerol by a recombinant Escherichia coli arcA mutant in fed-batch microaerobic cultures

Poly(3-hydroxybutyrate) (PHB) synthesis was analyzed under microaerobic conditions in a recombinant Escherichia coli arcA mutant using glycerol as the main carbon source. The effect of several additives was assessed in a semi-synthetic medium by the ‘one-factor-at-a-time’ technique. Casein amino acids (CAS) concentration was an important factor influencing both growth and PHB accumulation. Three factors exerting a statistically significant influence on PHB synthesis were selected by using a Plackett–Burman screening design [glycerol, CAS, and initial cell dry weight (CDW) concentrations] and then optimized through a Box–Wilson design. Under such optimized conditions (22.02 g l⁻¹ glycerol, 1.78 g l⁻¹ CAS, and 1.83 g l⁻¹ inoculum) microaerobic batch cultures gave rise to 8.37 g l⁻¹ CDW and 3.52 g l⁻¹ PHB in 48 h (PHB content of 42%) in a benchtop bioreactor. Further improvements in microaerobic PHB accumulation were obtained in fed-batch cultures, in which glycerol was added to maintain its concentration above 5 g l⁻¹. After 60 h, CDW and PHB concentration reached 21.17 and 10.81 g l⁻¹, respectively, which results in a PHB content of 51%. Microaerobic fed-batch cultures allowed a 2.57-fold increase in volumetric productivity when compared with batch cultures. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. An erratum to this article can be found at     

A fermentation strategy for anti-MUC1 C595 diabody expression in recombinantEscherichia coli

The development of fermentation conditions for the production of C595 diabody fragment (dbFv) inE. coli HB2151 clone has been explored. Investigations were carried out to study the effect of carbon supplements over the expression period, the comparison of C595 dbfv production in synthetic and complex media, the influence of acetic acid upon antibody production, and comparison of one-stage and two-stage processes operated at batch or fed-batch modes in bioreactor. Yeast extract supplied during expression yielded more antibody fragment than any other carbon supply. The synthetic medium presented higher specific productivity (0.066 mg dbFv g⁻¹ dry cell weight) when compared to the complex medium (0.044 mg dbFv g⁻¹ DCW). The comparison of fermentation strategies demonstrated that (1) one-stage fed-batch fermentation performed higher C595 dbFv production than that operated in batch mode which was significantly affected by acetate concentration; (2) a two-stage batch operation could enhance C595 dbFv production. It was found that a concentration of 12.3 mg L⁻¹ broth of C595 dbFv and a cell concentration of 10.8 g L⁻¹ broth were achieved at the end of two-stage operation in 5-L fermentation.     

Production of curdlan using sucrose or sugar cane molasses by two-step fed-batch cultivation of Agrobacterium species

Maltose and sucrose were efficient carbon sources for the production of curdlan by a strain of Agrobacterium sp. A two-step, fed-batch operation was designed in which biomass was first produced, followed by curdlan production which was stimulated by nitrogen limitation. There exists an optimal timing for nitrogen limitation for curdlan production in the two-step, fed-batch operation. Maximum curdlan production (60 g L⁻¹) was obtained from sucrose with a productivity of 0.2 g L⁻¹ h⁻¹ when nitrogen was limited at a cell concentration of 16.0 g L⁻¹. It was also noted that the curdlan yield from sucrose was as high as 0.45 g curdlan g⁻¹ sucrose, and the highest specific production rate was 1.0 g curdlan g⁻¹ cells h⁻¹ right after nitrogen limitation. Of particular importance was the use of molasses as a cheap carbon source to produce curdlan in the two-step, fed-batch cultivation. As high as 42 g L⁻¹ of curdlan with a yield of 0.35 g curdlan g⁻¹ total sugar was obtained after 120 h of fed-batch cultivation. Received 20 August 1996/ Accepted in revised form 26 November 1996     

Production of ginsenoside and polysaccharide by two-stage cultivation of Panax quinquefolium L. cells

Based on the results of carbon source consumption in cell suspension culture of Panax quinquefolium L., 30 g L⁻¹ sucrose was fed into a 5-L stirred tank bioreactor on day 16 of culture to enhance cell density and metabolite production. Using a fed-batch cultivation strategy, polysaccharide production was enhanced to 1.608 g L⁻¹, which was 1.96-fold greater than with batch cultivation. The maximum saponin yield (7.828 mg L⁻¹) was obtained on day 24 and was about 36% higher than the yields obtained using batch cultivation. In a two-stage culture process, a combined treatment with sucrose, lactoalbumin hydrolysate, and methyl jasmonate caused a significant increase in total saponin yield (31.52 mg L⁻¹) in cell cultures after 27 d. This value represents an increase of 4.03-fold compared with the total saponin yield in fed-batch cultivation. The two-stage culture mode provided the best method for the in vitro production of secondary metabolites from P. quinquefolium.     

Citric acid production from sucrose using a recombinant strain of the yeast Yarrowia lipolytica

The yeast Yarrowia lipolytica is able to secrete high amounts of several organic acids under conditions of growth limitation and carbon source excess. Here we report the production of citric acid (CA) in a fed-batch cultivation process on sucrose using the recombinant Y. lipolytica strain H222-S4(p67ICL1) T5, harbouring the invertase encoding ScSUC2 gene of Saccharomyces cerevisiae under the inducible XPR2 promoter control and multiple ICL1 copies (10–15). The pH-dependent expression of invertase was low at pH 5.0 and was identified as limiting factor of the CA-production bioprocess. The invertase expression was sufficiently enhanced at pH 6.0–6.8 and resulted in production of 127–140 g l⁻¹ CA with a yield Y _CA of 0.75–0.82 g g⁻¹, whereas at pH 5.0, 87 g l ⁻¹ with a yield Y _CA of 0.51 gg⁻¹ were produced. The CA-productivity Q _CA increased from 0.40 g l ⁻¹ h⁻¹ at pH 5.0 up to 0.73 g l ⁻¹ h⁻¹ at pH 6.8. Accumulation of glucose and fructose at high invertase expression level at pH 6.8 indicated a limitation of CA production by sugar uptake. The strain H222-S4(p67ICL1) T5 also exhibited a gene–dose-dependent high isocitrate lyase expression resulting in strong reduction (<5%) of isocitric acid, a by-product during CA production.     

Enzymatic resolution of racemic phenyloxirane by a novel epoxide hydrolase from Aspergillus niger SQ-6 and its fed-batch fermentation

A microorganism with the ability to catalyze the resolution of racemic phenyloxirane was isolated and identified as Aspergillus niger SQ-6. Chiral capillary electrophoresis was successfully applied to separate both phenyloxirane and phenylethanediol. The epoxide hydrolase (EH) involved in this resolution process was (R)-stereospecific and constitutively expressed. When whole cells were used during the biotransformation process, the optimum temperature and pH for stereospecific vicinal diol production were 35°C and 7.0, respectively. After a 24-h conversion, the enantiomer excess of (R)-phenylethanediol produced was found to be >99%, with a conversion rate of 56%. In fed-batch fermentations at 30°C for 44 h, glycerol (20 g L⁻¹) and corn steep liquor (CSL) (30 g L⁻¹) were chosen as the best initial carbon and nitrogen sources, and EH production was markedly improved by pulsed feeding of sucrose (2 g L⁻¹ h⁻¹) and continuous feeding of CSL (1 g L⁻¹ h⁻¹) at a fermentation time of 28 h. After optimization, the maximum dry cell weight achieved was 24.5±0.8 g L⁻¹; maximum EH production was 351.2±13.1 U L⁻¹ with a specific activity of 14.3±0.5 U g⁻¹. Partially purified EH exhibited a temperature optimum at 37°C and pH optimum at 7.5 in 0.1 M phosphate buffer. This study presents the first evidence for the existence of a predicted epoxide racemase, which might be important in the synthesis of epoxide intermediates.     

Accumulation of organic acids in cultivations of Neisseria meningitidis C

Aiming at the industrial production of serogroup C meningococcal vaccine, different experimental protocols were tested to cultivate Neisseria meningitidis C and to investigate the related organic acid release. Correlations were established between specific rates of acetic acid and lactic acid accumulation and specific growth rate, during cultivations carried out on the Frantz medium in a 13 l bioreactor at 35°C, 0.5 atm, 400 rpm and air flowrate of 2 l min⁻¹. A first set of nine batch runs was carried out: (1) with control of dissolved oxygen (O₂) at 10% of its saturation point, (2) with control of pH at 6.5, and (3) without any control, respectively. Additional fed-batch or partial fed-batch cultivations were performed without dissolved O₂ control, varying glucose concentration from 1.0 to 3.0 g l⁻¹, nine of which without pH control and other two with pH control at 6.5. No significant organic acid level was detected with dissolved O₂ control, whereas acetic acid formation appeared to depend on biomass growth either in the absence of any pH and dissolved O₂ control or when the pH was kept at 6.5. Under these last conditions, lactic acid was released as well, but it did not seem to be associated to biomass growth. A survey of possible metabolic causes of this behavior suggested that N. meningitidis may employ different metabolic pathways for the carbon source uptake depending on the cultivation conditions.     

Effect of growth rate on the production of<Emphasis Type="SmallCaps">l</Emphasis>-proline in the fed-batch culture of<Emphasis Type="Italic">Corynebacterium acetoacidophilum</Emphasis>

Corynebacterium acetoacidophilum RYU3161 was cultivated in al-histidine-limited fed-batch culture. To investigate the effect of cell growth on thel-proline production, 5l fed-batch culture was performed using an exponential feeding rate to obtain the specific growth rates (μ) of 0.04, 0.06, 0.08, and 0.1 h⁻¹. The results show that the highest production ofl-proline was obtained at μ=0.04 h⁻¹. The specificl-proline production rate (Q_p) increased proportionally as a function of the specific growth rate, but decreased after it revealed the maximum value at μ=0.08 h⁻¹. Thus, the highest productivity ofl-proline was 1.66 g L⁻¹ h⁻¹ at μ=0.08 h⁻¹. The results show that the production of L-proline inC. acetoacidophilum RYU3161 has mixed growth-associated characteristics.     

Dielectric barrier discharge plasma as a novel approach for improving 1,3-propanediol production in <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

Dielectric barrier discharge plasma was used to generate a stable strain of Klebsiella pneumoniae (designated to as Kp-M2) with improved 1,3-propanediol production. The specific activities of glycerol dehydrogenase, glycerol dehydatase and 1,3-propanediol oxidoreductase in the crude cell extract increased from 0.11, 9.2 and 0.15 U mg⁻¹, respectively, for wild type to 0.67, 14.4 and 1.6 U mg⁻¹ for Kp-M2. The glycerol flux of Kp-M2 was redistributed with the flux to the reductive pathway being increased by 20% in batch fermentation. The final 1,3-propanediol concentrations achieved by Kp-M2 in batch and fed-batch fermentations were 19.9 and 76.7 g l⁻¹, respectively, which were higher than those of wild type (16.2 and 49.2 g l⁻¹). The results suggested that dielectric barrier discharge plasma could be used as an effective approach to improve 1,3-propanediol production in K. pneumoniae.     

High alcohol production by repeated batch fermentation using an immobilized osmotolerant Saccharomyces cerevisiae

A repeated batch fermentation system was used to produce ethanol using an osmotolerant Saccharomyces cerevisiae (VS₃) immobilized in calcium alginate beads. For comparison free cells were also used to produce ethanol by repeated batch fermentation. Fermentation was carried for six cycles with 125, 250 or 500 beads using 150, 200 or 250 g glucose L⁻¹ at 30°C. The maximum amount of ethanol produced by immobilized VS₃ using 150 g L⁻¹ glucose was only 44 g L⁻¹ after 48 h, while the amount of ethanol produced by free cells in the first cycle was 72 g L⁻¹. However in subsequent fed batch cultures more ethanol was produced by immobilized cells compared to free cells. The amount of ethanol produced by free cells decreased from 72 g L⁻¹ to 25 g L⁻¹ after the fourth cycle, while that of immobilized cells increased from 44 to 72 g L⁻¹. The maximum amount of ethanol produced by immobilized VS₃ cells using 150, 200 and 250 g glucose L⁻¹ was 72.5, 93 and 87 g ethanol L⁻¹ at 30°C. Journal of Industrial Microbiology & Biotechnology (2000) 24, 222–226. Received 16 September 1999/ Accepted in revised form 22 December 1999     

Increased erythritol production in fed-batch cultures of Torula sp. by controlling glucose concentration

The effect of glucose concentration on erythritol production by Torula sp. was investigated. The maximum volumetric productivity of erythritol was obtained at an initial glucose concentration of 300 g l⁻¹ in batch culture. The volumetric productivity was maximal at a controlled glucose concentration of 225 g l⁻¹, reducing the lag time of the erythritol production. A fed-batch culture was established with an initial glucose concentration of 300 g l⁻¹ and with a controlled glucose concentration of 225 g l⁻¹ in medium containing phytic acid as a phosphate source. In this fed-batch culture, a final erythritol production of 192 g l⁻¹ was obtained from 400 g l⁻¹ glucose in 88 h. This corresponded to a volumetric productivity of 2.26 g l⁻¹ h⁻¹ and a 48% yield. Journal of Industrial Microbiology & Biotechnology (2001) 26, 248–252. Received 26 September 2000/ Accepted in revised form 16 January 2001     

Production of 1,3-propanediol by Klebsiella pneumoniae from glycerol broth

Broth containing 152 g glycerol l⁻¹ from Candida krusei culture was converted to 1,3-propanediol by Klebsiella pneumoniae. Residual glucose in the broth promoted growth of K. pneumoniae while acetate was inhibitory. After desalination treatment of glycerol broth by electrodialysis, the acetate in the broth was removed. A fed-batch culture with electrodialytically pretreated broth as␣substrate was developed giving 53 g 1,3- propanediol l⁻¹ with a yield of 0.41 g g⁻¹ glycerol and a productivity of 0.94 g l⁻¹ h⁻¹.     

Heterotrophic high-cell-density fed-batch and continuous-flow cultures of <Emphasis Type="Italic">Galdieria sulphuraria</Emphasis> and production of phycocyanin

Production of biomass and phycocyanin (PC) were investigated in highly pigmented variants of the unicellular rhodophyte Galdieria sulphuraria, which maintained high specific pigment concentrations when grown heterotrophically in darkness. The parental culture, G. sulphuraria 074G was grown on solidified growth media, and intensely coloured colonies were isolated and grown in high-cell-density fed-batch and continuous-flow cultures. These cultures contained 80–110 g L⁻¹ biomass and 1.4–2.9 g L⁻¹ PC. The volumetric PC production rates were 0.5–0.9 g L⁻¹ day⁻¹. The PC production rates were 11–21 times higher than previously reported for heterotrophic G. sulphuraria 074G grown on glucose and 20–287 times higher than found in phototrophic cultures of Spirulina platensis, the organism presently used for commercial production of PC.