Optimizing Membrane Protein Overexpression in the Escherichia coli strain Lemo21(DE3)

Escherichia coli BL21(DE3) is widely used to overexpress proteins. In this overexpression host, the gene encoding the target protein is located on a plasmid and is under control of the T7 promoter, which is recognized exclusively by the T7 RNA polymerase (RNAP). The T7 RNAP gene is localized on the chromosome, and its expression is governed by the non-titratable, IPTG-inducible lacUV5 promoter. Recently, we constructed the Lemo21(DE3) strain, which allows improved control over the expression of genes from the T7 promoter. Lemo21(DE3) is a BL21(DE3) strain equipped with a plasmid harboring the gene encoding T7 lysozyme, an inhibitor of the T7 RNAP, under control of the exceptionally well-titratable rhamnose promoter. The overexpression yields of a large collection of membrane proteins in Lemo21(DE3) at different concentrations of rhamnose indicated that this strain may be very suitable for optimizing the production of membrane proteins. However, insight in the mechanism by which optimized expression yields are achieved in Lemo21(DE3) is lacking. Furthermore, whether the overexpressed proteins are suitable for functional and structural studies remains to be tested. Here, we show that in Lemo21(DE3), (i) the modulation of the activity of the T7 RNAP by the T7 lysozyme is key to optimizing the ratio of membrane proteins properly inserted in the cytoplasmic membrane to non-inserted proteins; (ii) maximizing the yields of membrane proteins is accompanied by reduction of the adverse effects of membrane protein overexpression, resulting in stable overexpression; and (iii) produced membrane proteins can be used for functional and structural studies.     

Solubilization of native integral membrane proteins in aqueous buffer by noncovalent chelation with monomethoxy poly(ethylene glycol) (mPEG) polymers

Highly hydrophobic integral membrane proteins (IMPs)are typically purified in excess detergent media, often resulting in rapid inactivation and denaturation of the protein. One promising approach to solve this problem is to couple hydrophilic polymers, such as monomethoxypolyethylene glycol (mPEG) to IMPs under mild conditions in place of detergents. However, the broad application of this approach is hampered by poor reaction efficiencies, low tolerance of detergent stabilized membrane proteins to reaction conditions, and a lack of proper site-specific reversible approaches. Here, we have developed a straightforward, efficient, and mild approach to site-specific noncovalent binding of long-chain polymers to recombinant IMPs. This method uses the hexa-histidine tag (His-Tag) often used for purification of recombinant proteins as an attachment site for mPEGs. Solubility studies performed using five different IMPs confirmed that all tested mPEG-bound IMPs were completely soluble and stable in detergent free aqueous buffer compared to their precipitated native proteins under the identical circumstances. Activity assays and circular dichroism (CD) spectroscopy confirmed the structural integrity of modified IMPs.     

A glimpse into the molecular mechanism of integral membrane proteins through hydrogen–deuterium exchange mass spectrometry

Integral membrane proteins (IMPs) control countless fundamental biological processes and constitute the majority of drug targets. For this reason, uncovering their molecular mechanism of action has long been an intense field of research. They are, however, notoriously difficult to work with, mainly due to their localization within the heterogeneous of environment of the biological membrane and the instability once extracted from the lipid bilayer. High‐resolution structures have unveiled many mechanistic aspects of IMPs but also revealed that the elucidation of static pictures has limitations. Hydrogen–deuterium exchange coupled to mass spectrometry (HDX‐MS) has recently emerged as a powerful biophysical tool for interrogating the conformational dynamics of proteins and their interactions with ligands. Its versatility has proven particularly useful to reveal mechanistic aspects of challenging classes of proteins such as IMPs. This review recapitulates the accomplishments of HDX‐MS as it has matured into an essential tool for membrane protein structural biologists.     

Overexpression and purification of recombinant membrane PsbH protein in Escherichia coli

In this work, we featured an expression system that enables the production of sufficient quantities ( approximately mg) of low molecular weight membrane protein of photosystem II, PsbH protein, for solid-state NMR as well as other biophysical studies. PsbH gene from cyanobacterium Synechocystis sp. PCC 6803 was cloned into a plasmid expression vector, which allowed expression of the PsbH protein as a glutathione-S transferase (GST) fusion protein in Escherichia coli BL21(DE3) cells. A relatively large GST anchor overcomes foreseeable problems with the low solubility of membrane proteins and the toxicity caused by protein incorporation into the membrane of the host organism. As a result, the majority of fusion protein was obtained in a soluble state and could be purified from crude bacterial lysate by affinity chromatography on immobilized glutathione under non-denaturing conditions. The PsbH protein was cleaved from the carrier protein with Factor Xa protease and purified on DEAE-cellulose column with yields of up to 2.1 microg protein/ml of bacterial culture. The procedure as we optimized is applicable for isolation of small membrane proteins for structural studies.     

Lipid–protein nanodiscs for cell-free production of integral membrane proteins in a soluble and folded state: Comparison with detergent micelles,bicelles and liposomes

Production of integral membrane proteins (IMPs) in a folded state is a key prerequisite for their functional and structural studies. In cell-free (CF) expression systems membrane mimicking components could be added to the reaction mixture that promotes IMP production in a soluble form. Here lipid–protein nanodiscs (LPNs) of different lipid compositions (DMPC, DMPG, POPC, POPC/DOPG) have been compared with classical membrane mimicking media such as detergent micelles, lipid/detergent bicelles and liposomes by their ability to support CF synthesis of IMPs in a folded and soluble state. Three model membrane proteins of different topology were used: homodimeric transmembrane (TM) domain of human receptor tyrosine kinase ErbB3 (TM-ErbB3, 1TM); voltage-sensing domain of K⁺ channel KvAP (VSD, 4TM); and bacteriorhodopsin from Exiguobacterium sibiricum (ESR, 7TM). Structural and/or functional properties of the synthesized proteins were analyzed. LPNs significantly enhanced synthesis of the IMPs in a soluble form regardless of the lipid composition. A partial disintegration of LPNs composed of unsaturated lipids was observed upon co-translational IMP incorporation. Contrary to detergents the nanodiscs resulted in the synthesis of ~ 80% active ESR and promoted correct folding of the TM-ErbB3. None of the tested membrane mimetics supported CF synthesis of correctly folded VSD, and the protocol of the domain refolding was developed. The use of LPNs appears to be the most promising approach to CF production of IMPs in a folded state. NMR analysis of ¹⁵N-Ile-TM-ErbB3 co-translationally incorporated into LPNs shows the great prospects of this membrane mimetics for structural studies of IMPs produced by CF systems.     

Lipid-protein nanodiscs for cell-free production of integral membrane proteins in a soluble and folded state: comparison with detergent micelles, bicelles and liposomes

Production of integral membrane proteins (IMPs) in a folded state is a key prerequisite for their functional and structural studies. In cell-free (CF) expression systems membrane mimicking components could be added to the reaction mixture that promotes IMP production in a soluble form. Here lipid-protein nanodiscs (LPNs) of different lipid compositions (DMPC, DMPG, POPC, POPC/DOPG) have been compared with classical membrane mimicking media such as detergent micelles, lipid/detergent bicelles and liposomes by their ability to support CF synthesis of IMPs in a folded and soluble state. Three model membrane proteins of different topology were used: homodimeric transmembrane (TM) domain of human receptor tyrosine kinase ErbB3 (TM-ErbB3, 1TM); voltage-sensing domain of K(+) channel KvAP (VSD, 4TM); and bacteriorhodopsin from Exiguobacterium sibiricum (ESR, 7TM). Structural and/or functional properties of the synthesized proteins were analyzed. LPNs significantly enhanced synthesis of the IMPs in a soluble form regardless of the lipid composition. A partial disintegration of LPNs composed of unsaturated lipids was observed upon co-translational IMP incorporation. Contrary to detergents the nanodiscs resulted in the synthesis of ~80% active ESR and promoted correct folding of the TM-ErbB3. None of the tested membrane mimetics supported CF synthesis of correctly folded VSD, and the protocol of the domain refolding was developed. The use of LPNs appears to be the most promising approach to CF production of IMPs in a folded state. NMR analysis of (15)N-Ile-TM-ErbB3 co-translationally incorporated into LPNs shows the great prospects of this membrane mimetics for structural studies of IMPs produced by CF systems.     

Maltose-neopentyl glycol (MNG) amphiphiles for solubilization, stabilization and crystallization of membrane proteins

The understanding of integral membrane protein (IMP) structure and function is hampered by the difficulty of handling these proteins. Aqueous solubilization, necessary for many types of biophysical analysis, generally requires a detergent to shield the large lipophilic surfaces of native IMPs. Many proteins remain difficult to study owing to a lack of suitable detergents. We introduce a class of amphiphiles, each built around a central quaternary carbon atom derived from neopentyl glycol, with hydrophilic groups derived from maltose. Representatives of this maltose-neopentyl glycol (MNG) amphiphile family show favorable behavior relative to conventional detergents, as manifested in multiple membrane protein systems, leading to enhanced structural stability and successful crystallization. MNG amphiphiles are promising tools for membrane protein science because of the ease with which they may be prepared and the facility with which their structures may be varied.     

Role of membrane mimetics on biophysical EPR studies of membrane proteins

Biological membranes are essential in providing the stability of membrane proteins in a functional state. Functionally stable homogeneous sample is required for biophysical electron paramagnetic resonance (EPR) studies of membrane proteins for obtaining pertinent structural dynamics of the protein. Significant progresses have been made for the optimization of the suitable membrane environments required for biophysical EPR measurements. However, no universal membrane mimetic system is available that can solubilize all membrane proteins suitable for biophysical EPR studies while maintaining the functional integrity. Great efforts are needed to optimize the sample condition to obtain better EPR data quality of membrane proteins that can provide meaningful information on structural dynamics. In this mini-review, we will discuss important aspects of membrane mimetics for biophysical EPR measurements and current progress with some of the recent examples.     

Expression of Leptospira membrane proteins Signal Peptidase (SP) and Leptospira Endostatin like A (Len A) in BL-21(DE3) is toxic to the host cells

Heterologous expression of Integral Membrane Proteins (IMPs) is reported to be toxic to the host system in many studies. Even though there are reports on various concerns like transformation efficiency, growth properties, protein toxicity, inefficient expression and protein degradation in IMP overexpression, no studies so far addressed these issues in a comprehensive way. In the present study, two transmembrane proteins of the pathogen Leptospira interrogans, namely Signal peptidase (SP), and Leptospira Endostatin like A (Len-A) were taken along with a cytosolic protein Hydrolase (HYD) to assess the differences in transformation efficiency, protein toxicity, and protein stability when over expressed in Escherichia coli (E. coli). Bioinformatics analysis to predict the transmembrane localization indicated that both SP and Len are targeted to the membrane. The three proteins were expressed in full length in the E. coli expression strain, BL 21 (DE3). Significant changes were observed for the strains transformed with IMP genes under the parameters analysed such as, the transformation efficiency, survival of colonies on IPTG-plate, culture growth kinetics and protein expression compared to the strain harbouring the cytosolic protein gene.     

Characterization of the consequences of YidC depletion on the inner membrane proteome of E. coli using 2D blue native/SDS-PAGE

In the bacterium Escherichia coli, the essential inner membrane protein (IMP) YidC assists in the biogenesis of IMPs and IMP complexes. Our current ideas about the function of YidC are based on targeted approaches using only a handful of model IMPs. Proteome-wide approaches are required to further our understanding of the significance of YidC and to find new YidC substrates. Here, using two-dimensional blue native/SDS-PAGE methodology that is suitable for comparative analysis, we have characterized the consequences of YidC depletion for the steady-state levels and oligomeric state of the constituents of the inner membrane proteome. Our analysis showed that (i) YidC depletion reduces the levels of a variety of complexes without changing their composition, (ii) the levels of IMPs containing only soluble domains smaller than 100 amino acids are likely to be reduced upon YidC depletion, whereas the levels of IMPs with at least one soluble domain larger than 100 amino acids do not, and (iii) the levels of a number of proteins with established or putative chaperone activity (HflC, HflK, PpiD, OppA, GroEL and DnaK) are strongly increased in the inner membrane fraction upon YidC depletion. In the absence of YidC, these proteins may assist the folding of sizeable soluble domains of IMPs, thereby supporting their folding and oligomeric assembly. In conclusion, our analysis identifies many new IMPs/IMP complexes that depend on YidC for their biogenesis, responses that accompany depletion of YidC and an IMP characteristic that is associated with YidC dependence.     

IL-1023-57-PE40分泌表达的初步研究

将IL-1023-57-PE40基因与pelB信号肽融合置于pET-20b构建分泌表达质粒pET-20b-IL-1023-57-PE40,然后将pET-20b-IL-1023-57-PE40分别转化至BL21(DE3),BL21(DE3)pLysS,Rosetta(DE3),E·coliK12TB1,ER2566中。无论是在37℃或是在26℃,亦或在培养基中添加葡萄糖的情况下,IPTG诱导后,IL-1023-57-PE40蛋白只在BL21(DE3)pLysS菌中以可溶分泌形式表达,其中以37℃时培养基中不添加葡萄糖表达量为最高,占菌体蛋白总量的15%,说明蛋白的分泌表达与菌种的选择有关。表达产物经免疫印记检测可被抗PE40的特异抗体识别。通过质粒稳定性实验证明,pET-20b-IL-1023-57-PE40在BL21(DE3)中不稳定,导致蛋白的不表达,在Rosetta(DE3)BL21,E·coliK12TB1,ER2566中稳定但不表达,因此,以Rosetta(DE3)BL21为例,通过SDS-PAGE、DNAStar和ANThewin蛋白分析软件对本室构建的几种PE重组毒素进行比较分析,我们发现:并不是所有PE重组毒素融合信号肽序列后,就能分泌表达,PE重组毒素分泌表达还可能与导向部分的性质有关。     

Chromatographic benefits of elevated temperature for the proteomic analysis of membrane proteins

Integral membrane proteins (IMPs) perform crucial cellular functions and are the primary targets for most pharmaceutical agents. However, the hydrophobic nature of their membrane-embedded domains and their intimate association with lipids make them difficult to handle. Numerous proteomic platforms that include LC separations have been reported for the high-throughput profiling of complex protein samples. However, there are still many challenges to overcome for proteomic analyses of IMPs, especially as compared to their soluble counterparts. In particular, considerations for the technical challenges associated with chromatographic separations are just beginning to be investigated. Here, we review the benefits of using elevated temperatures during LC for the proteomic analysis of complex membrane protein samples.     

Membrane binding of lipidated Ras peptides and proteins — The structural point of view

Biological membranes are interesting interfaces, at which important biological processes occur. In addition to integral membrane proteins, a number of proteins bind to the membrane surface and associate with it. Posttranslational lipid modification is one important mechanism, by which soluble molecules develop a propensity towards the membrane and reversibly bind to it. Membrane binding by insertion of hydrophobic lipid moieties is relevant for up to 10% of all cellular proteins. A particular interesting lipid-modified protein is the small GTPase Ras, which plays a key role in cellular signal transduction. Until recently, the structural basis for membrane binding of Ras was not well-defined. However, with the advent of new synthesis techniques and the advancement of several biophysical methods, a number of structural and dynamical features about membrane binding of Ras proteins have been revealed. This review will summarize the chemical biology of Ras and discuss in more detail the biophysical and structural features of the membrane bound C-terminus of the protein.     

Membrane binding of lipidated Ras peptides and proteins--the structural point of view

Biological membranes are interesting interfaces, at which important biological processes occur. In addition to integral membrane proteins, a number of proteins bind to the membrane surface and associate with it. Posttranslational lipid modification is one important mechanism, by which soluble molecules develop a propensity towards the membrane and reversibly bind to it. Membrane binding by insertion of hydrophobic lipid moieties is relevant for up to 10% of all cellular proteins. A particular interesting lipid-modified protein is the small GTPase Ras, which plays a key role in cellular signal transduction. Until recently, the structural basis for membrane binding of Ras was not well-defined. However, with the advent of new synthesis techniques and the advancement of several biophysical methods, a number of structural and dynamical features about membrane binding of Ras proteins have been revealed. This review will summarize the chemical biology of Ras and discuss in more detail the biophysical and structural features of the membrane bound C-terminus of the protein.     

An unusual halotolerant alpha-type carbonic anhydrase from the alga Dunaliella salina functionally expressed in Escherichia coli

A 60-kDa, salt-inducible, internally duplicated alpha-type carbonic anhydrase (Dca) is associated with the plasma membrane of the extremely salt-tolerant, unicellular, green alga Dunaliella salina. Unlike other carbonic anhydrases, Dca remains active over a very broad range of salinities (0-4M NaCl), thus representing a novel type of extremely halotolerant enzyme. To elucidate the structural principles of halotolerance, structure-function investigations of Dca have been initiated. Such studies require considerable amounts of the enzyme, and hence, large-scale algal cultivation. Furthermore, the purified enzyme is often contaminated with other, co-purifying algal carbonic anhydrases. Expression in heterologous systems offers a means to produce, and subsequently purify, sufficiently large amounts of Dca required for activity and structural studies. Attempts to over-express Dca in the Escherichia coli BL21(DE3)pLysS strain, after optimizing various expression parameters, produced soluble, but weakly active protein, composed of fully reduced and variably -S-S- cross-linked chains (each of the Dca repeats contains a pair of cysteine residues, presumably forming a disulfide bond). However, when the E. coli Origami B(DE3)pLysS strain was used as a host, a functionally active enzyme with proper disulfide bonds was formed in good yield. Affinity-purified recombinant Dca resembled the native enzyme from D. salina in activity and salt tolerance. Hence, this expression system offers a means of pursuing detailed studies of this extraordinary protein using biochemical, biophysical, and crystallographic approaches.     

A combination of immobilised pH gradients improves membrane proteomics

Membrane protein analyses have been notoriously difficult due to hydrophobicity and the general low abundance of these proteins compared to their soluble cytosolic counterparts. Shotgun proteomics has become the preferred method for analyses of membrane proteins, in particular the recent development of peptide immobilized pH gradient isoelectric focusing (IPG-IEF) as the first dimension of two-dimensional shotgun proteomics. Recently, peptide IPG-IEF has been shown to be a valuable shotgun proteomics technique through the use of acidic narrow range IPG strips, which demonstrated that small acidic p I increments are rich in peptides. In this study, we assess the utility of both broad range (BR) (p I 3-10) and narrow range (NR) (p I 3.4-4.9) IPG strips for rat liver membrane protein analyses. Furthermore, the use of these IPG strips was evaluated using label-free quantitation to demonstrate that the identification of a subset of proteins can be improved using NR IPG strips. NR IPG strips provided 2603 protein assignments on average (with 826 integral membrane proteins (IMPs)) compared to BR IPG strips, which provided 2021 protein assignments on average (with 712 IMPs). Nonredundant protein analysis demonstrated that in total from all experiments, 4195 proteins (with 1301 IMPs) could be identified with 1428 of these proteins unique to NR IPG strips with only 636 from BR IPG strips. With the use of label-free quantitation methods, 1659 proteins were used for quantitative comparison of which 319 demonstrated statistically significant increases in normalized spectral abundance factors (NSAF) in NR IPG strips compared to 364 in BR IPG strips. In particular, a selection of six highly hydrophobic transmembrane proteins was observed to increase in NSAF using NR IPG strips. These results provide evidence for the use of alternative pH gradients in combination to improve the shotgun proteomic analysis of the membrane proteome.     

The tunable pReX expression vector enables optimizing the T7-based production of membrane and secretory proteins in <Emphasis Type="Italic">E. coli</Emphasis>

Background

To optimize the production of membrane and secretory proteins in Escherichia coli, it is critical to harmonize the expression rates of the genes encoding these proteins with the capacity of their biogenesis machineries. Therefore, we engineered the Lemo21(DE3) strain, which is derived from the T7 RNA polymerase-based BL21(DE3) protein production strain. In Lemo21(DE3), the T7 RNA polymerase activity can be modulated by the controlled co-production of its natural inhibitor T7 lysozyme. This setup enables to precisely tune target gene expression rates in Lemo21(DE3). The t7lys gene is expressed from the pLemo plasmid using the titratable rhamnose promoter. A disadvantage of the Lemo21(DE3) setup is that the system is based on two plasmids, a T7 expression vector and pLemo. The aim of this study was to simplify the Lemo21(DE3) setup by incorporating the key elements of pLemo in a standard T7-based expression vector.

Results

By incorporating the gene encoding the T7 lysozyme under control of the rhamnose promoter in a standard T7-based expression vector, pReX was created (ReX stands for Regulated gene eXpression). For two model membrane proteins and a model secretory protein we show that the optimized production yields obtained with the pReX expression vector in BL21(DE3) are similar to the ones obtained with Lemo21(DE3) using a standard T7 expression vector. For another secretory protein, a c-type cytochrome, we show that pReX, in contrast to Lemo21(DE3), enables the use of a helper plasmid that is required for the maturation and hence the production of this heme c protein.

Conclusions

Here, we created pReX, a T7-based expression vector that contains the gene encoding the T7 lysozyme under control of the rhamnose promoter. pReX enables regulated T7-based target gene expression using only one plasmid. We show that with pReX the production of membrane and secretory proteins can be readily optimized. Importantly, pReX facilitates the use of helper plasmids. Furthermore, the use of pReX is not restricted to BL21(DE3), but it can in principle be used in any T7 RNAP-based strain. Thus, pReX is a versatile alternative to Lemo21(DE3).

     

Increased levels of recombinant human proteins with the Escherichia coli strain Rosetta(DE3)

The effect of two Escherichia coli expression strains on the production of recombinant human protein fragments was evaluated. High-throughput protein production projects, such as the Swedish Human Protein Atlas project, are dependent on high protein yield and purity. By changing strain from E. coli BL21(DE3) to E. coli Rosetta(DE3) the overall success rate of the protein production has increased dramatically. The Rosetta(DE3) strain compensates for a number of rare codons. Here, we describe how the protein expression of human gene fragments in E. coli strains BL21(DE3) and Rosetta(DE3) was evaluated in two stages. Initially a test set of 68 recombinant proteins that previously had been expressed in BL21(DE3) was retransformed and expressed in Rosetta(DE3). The test set generated very positive results with an improved expression yield and a significantly better purity of the protein product which prompted us to implement the Rosetta(DE3) strain in the high-throughput protein production. Except for analysis of protein yield and purity the sequences were also analyzed regarding number of rare codons and rare codon clusters. The content of rare codons showed to have a significant effect on the protein purity. Based on the results of this study the atlas project permanently changed expression strain to Rosetta(DE3).     

A helical processing pipeline for EM structure determination of membrane proteins

Electron crystallography plays a key role in the structural biology of integral membrane proteins (IMPs) by offering one of the most direct means of providing insight into the functional state of these molecular machines in their lipid-associated forms, and also has the potential to facilitate examination of physiologically relevant transitional states and complexes. Helical or tubular crystals, which are the natural product of proteins crystallizing on the surface of a cylindrical vesicle, offer some unique advantages, such as three-dimensional (3D) information from a single view, compared to other crystalline forms. While a number of software packages are available for processing images of helical crystals to produce 3D electron density maps, widespread exploitation of helical image reconstruction is limited by a lack of standardized approaches and the initial effort and specialized expertise required. Our goal is to develop an integrated pipeline to enable structure determination by transmission electron microscopy (TEM) of IMPs in the form of tubular crystals. We describe here the integration of standard Fourier-Bessel helical analysis techniques into Appion, an integrated, database-driven pipeline.