Dimer ribbons in the three-dimensional structure of sarcoplasmic reticulum

The three-dimensional structure of scallop sarcoplasmic reticulum membranes has been determined from electron micrographs of two classes of stain-filled tubules by helical reconstruction methods. These structures are characterized by dimer ribbons of Ca2+-ATPase molecules running diagonally around the tube wall. Deep right-handed grooves separate the ribbons. The elongated, curved units of the dimer (approximately 95 A long in the radial direction; 60 to 70 A axially, and about 30 A wide) are displaced axially by approximately 34 A and are connected at their outer ends by a bridge running nearly parallel to the tube axis. The monomers make a second contact at their inner ends. Adjacent units with the same orientation form a strong contact that is responsible for the ribbon appearance. Comparison of tubules of different diameter shows that one set of connections between the dimer ribbons is conserved: the inner ends of axially displaced dimers appear to make contact along a left-handed path almost perpendicular to the major grooves. The lipid bilayer cannot be clearly identified. The two-dimensional map obtained from flattened tubules is consistent with the three-dimensional reconstruction in showing dimer ribbons connected by a weak contact across the grooves, strongly resembling the inter-dimer bond observed in three dimensions. The two-dimensional map shows a 2-fold axis relating units of the dimer, but the three-dimensional tubes show a slight axial polarity that may arise from the presence of proteins other than the Ca2+-ATPase.     

Crystalline structure of sarcoplasmic reticulum from scallop

Negatively stained sarcoplasmic reticulum from the scallop Placopecten magellanicus presented a variety of crystalline forms, the most common being tubular structures. These were characterized by paired rows of morphological units, spaced at approximately 120 A, running diagonally across the tubules. The orthogonal unit cell (120 X 55 A) contained two units, related by a twofold axis, which probably represented the part of the Ca2+-ATPase molecule projecting from the outer surface of the membrane.     

Effect of Ca2+ on the dimeric structure of scallop sarcoplasmic reticulum

Scallop sarcoplasmic reticulum (SR), visualized in situ by freeze-fracture and deep-etching, is characterized by long tubes displaying crystalline arrays of Ca2+-ATPase dimer ribbons, resembling those observed in isolated SR vesicles. The orderly arrangement of the Ca2+-ATPase molecules is well preserved in muscle bundles permeabilized with saponin. Treatment with saponin, however, is not needed to isolate SR vesicles displaying a crystalline surface structure. Omission of ATP from the isolation procedure of SR vesicles does not alter the dimeric organization of the Ca2+-ATPase, although the overall appearance of the tubes seems to be affected: the edges of the vesicles are scalloped and the individual Ca2+-ATPase molecules are not clearly defined. The effect of Ca2+ on isolated scallop SR vesicles was investigated by correlating the enzymatic activity and calcium-binding properties of the Ca2+-ATPase with the surface structure of the vesicles, as revealed by electron microscopy. The dimeric organization of the membrane is preserved at Ca2+ concentrations where the Ca2+ binds to the high affinity sites (half-maximum saturation at pCa approximately 7.0 with a Hill coefficient of 2.1) and the Ca2+-ATPase is activated (half-maximum activation at pCa approximately 6.8 with a Hill coefficient of 1.84). Higher Ca2+ concentrations disrupt the crystalline surface array of the SR tubes, both in the presence and absence of ATP. We discuss here whether the Ca2+-ATPase dimer identified as a structural unit of the SR membrane represents the Ca2+ pump in the membrane.     

Time-resolved x-ray diffraction studies of the sarcoplasmic reticulum membrane during active transport.

X-ray and neutron diffraction studies of oriented multilayers of a highly purified fraction of isolated sarcoplasmic reticulum (SR) have previously provided the separate profile structures of the lipid bilayer and the Ca2+-ATPase molecule within the membrane profile to approximately 10-A resolution. These studies used biosynthetically deuterated SR phospholipids incorporated isomorphously into the isolated SR membranes via phospholipid transfer proteins. Time-resolved x-ray diffraction studies of these oriented SR membrane multilayers have detected significant changes in the membrane profile structure associated with phosphorylation of the Ca2+-ATPase within a single turnover of the Ca2+-transport cycle. These studies used the flash photolysis of caged ATP to effectively synchronize the ensemble of Ca2+-ATPase molecules in the multilayer, synchrotron x-radiation to provide 100-500-ms data collection times, and double-beam spectrophotometry to monitor the Ca2+-transport process directly in the oriented SR membrane multilayer.     

Comparison of the catalytic and structural properties of Ca2+-ATPase in longitudinal tubules and terminal cisternae of the sarcoplasmic reticulum

The catalytic behavior and structural features of Ca2+-ATPase in the vesicles of longitudinal tubules and terminal cisternae of the sarcoplasmic reticulum isolated from rabbit skeletal muscles was analysed. pH measurements have shown under optimal conditions Ca2+-ATPase has similar catalytic behavior both in the fractions of longitudinal tubules and terminal cisternae. Under non-optimal conditions, the behavior similarity was not observed. The specific activity of the ATPase enzyme under optimal conditions was shown to be much higher in the fraction of longitudinal tubules than in the fraction of terminal cisternae. Caffeine added to both fractions had no effect on the catalytic behavior of Ca2+-ATPase. As judged from fluorescence analysis, the structure of Ca2+-ATPase of longitudinal tubules differs from that structure of terminal cisternae. In sarcoplasmic reticulum membrane, at least half of the tryptophan residues of Ca2+-ATPase was shown to be buried in the lipid bilayer. Our findings suggest that in terminal cisternae some of the Ca2+-ATPase molecules exist as an oligomeric protein and do not participate in ATP hydrolysis (named "silent" Ca2+-ATPase).     

Structure of the vanadate-induced crystals of sarcoplasmic reticulum Ca2+-ATPase

The projected structure of the vanadate-induced crystalline aggregates of Ca2+-ATPase molecules in isolated sarcoplasmic reticulum membranes has been determined. The molecules form tubular crystals with an oblique surface lattice having cell dimensions a = 65.9 A, b = 114.4 A and gamma = 77.9 degrees. The space group is P2. The crystalline tubules are formed through lateral aggregation of chains made up of dimers of Ca2+-ATPase molecules.     

Ca2+-ATPase membrane crystals in sarcoplasmic reticulum. The effect of trypsin digestion

Vanadate induces the formation of two-dimensional crystalline arrays of Ca2+-ATPase molecules in sarcoplasmic reticulum. The Ca2+-ATPase membrane crystals are evenly distributed among the terminal cisternae and longitudinal tubules of sarcoplasmic reticulum, but very few crystals were observed in the T tubules. Tryptic cleavage of the Ca2+ transport ATPase into two major fragments (A and B) did not interfere with the vanadate-induced formation of membrane crystals. The ability of Ca2+-ATPase to crystallize was lost after further cleavage of the A fragment into the A1 and A2 subfragments that is known to be accompanied by loss of Ca2+ uptake. Vanadate (0.1-5 mM) inhibited the secondary cleavage of Ca2+-ATPase by trypsin suggesting that the susceptibility of the tryptic cleavage sites is influenced either by the conformation of the enzyme or by the formation of ATPase crystals.     

Crystallization of the Ca2+-ATPase of skeletal muscle sarcoplasmic reticulum. Inhibition by myotoxin a

Decavanadate produces extensive ordered arrays of Ca2+-ATPase molecules on sarcoplasmic reticulum (SR) vesicle surfaces [(1984) J. Bioenerg. Biomembranes 16, 491-505] and the basic unit of these crystalline structures seems to be a dimer of Ca2+-ATPase [(1983) J. Ultrastruct. Res. 24, 454-464; (1984) J. Mol. Biol. 174, 193-204]. Myotoxin a, isolated from the venom of the prairie rattlesnake Crotalus viridis viridis, is a muscle-degenerating polypeptide and its primary site of interaction is the SR membrane, where it uncouples CA2+-translocation from CA2+-dependent ATP hydrolysis [(1986) Arch. Biochem. Biophys. 246, 90-97]. The effect of myotoxin a on decavanadate-induced two-dimensional Ca2+-ATPase crystals of SR membranes has been investigated. The toxin inhibits the formation of two-dimensional SR-membrane crystals and disrupts previously formed crystals in a time- and concentration-dependent manner, which parallels the uncoupling of ATP hydrolysis from Ca2+ translocation. Two-dimensional crystalline arrays of the SR membrane have a typical diffraction pattern which, after myotoxin a treatment, displays a progressive loss of order. Decavanadate is an uncompetitive inhibitor of the Ca2+-ATPase enzyme-myotoxin a complex. The present results suggest that a Ca2+-ATPase dimer is required for coupling Ca2+ translocation to Ca2+-dependent ATP hydrolysis.     

Localization of Ca2+ + Mg2+-ATPase of the sarcoplasmic reticulum in adult rat papillary muscle

Localization of the Ca2+ + Mg2+-ATPase of the sarcoplasmic reticulum in rat papillary muscle was determined by indirect immunofluorescence and immunoferritin labeling of cryostat and ultracryotomy sections, respectively. The Ca2+ + Mg2+-ATPase was found to be rather uniformly distributed in the free sarcoplasmic reticulum membrane but to be absent from both peripheral and interior junctional sarcoplasmic reticulum membrane, transverse tubules, sarcolemma, and mitochondria. This suggests that the Ca2+ + Mg2+-ATPase of the sarcoplasmic reticulum is antigenically unrelated to the Ca2+ + Mg2+-ATPase of the sarcolemma. These results are in agreement with the idea that the sites of interior and peripheral coupling between sarcoplasmic reticulum membrane and transverse tubules and between sarcoplasmic reticulum and sarcolemmal membranes play the same functional role in the excitation-contraction coupling in cardiac muscle.     

Effect of Ca2+ binding on the profile structure of the sarcoplasmic reticulum membrane using time-resolved x-ray diffraction.

A number of studies have indicated that Ca(2+)-ATPase, the integral membrane protein of the sarcoplasmic reticulum (SR) membrane, undergoes some structural change upon Ca2+ binding to its high affinity binding sites (i.e., upon conversion of the E1 to the CaxE1 form of the enzyme). We have used x-ray diffraction to study the changes in the electron density profile of the SR membrane upon high-affinity Ca2+ binding to the enzyme in the absence of enzyme phosphorylation. The photolabile Ca2+ chelator DM-nitrophen was used to rapidly release Ca2+ into the extravesicular spaces throughout an oriented SR membrane multilayer and thereby synchronously in the vicinity of the high affinity binding sites of each enzyme molecule in the multilayer. A critical control was developed to exclude possible artifacts arising from heating and non-Ca2+ photolysis products in the membrane multilayer specimens upon photolysis of the DM-nitrophen. Upon photolysis, changes in the membrane electron density profile arising from high-affinity Ca2+ binding to the enzyme are found to be localized to three different regions within the profile. These changes can be attributed to the added electron density of the Ca2+ bound at three discrete sites centered at 5, approximately 30, and approximately 67 A in the membrane profile, but they also require decreased electron density within the cylindrically averaged profile structure of the Ca(2+)-ATPase immediately adjacent (< 15 A) to these sites.(ABSTRACT TRUNCATED AT 250 WORDS)     

Characterization of the Ca2+- or Mg2+-ATPase of transverse tubule membranes isolated from rabbit skeletal muscle

Transverse tubule membranes isolated from rabbit skeletal muscle have high levels of a Ca2+- or Mg2+-ATPase with Km values for Ca-ATP or Mg-ATP in the 0.2 mM range, but do not display detectable levels of ATPase activity activated by micromolar [Ca2+]. The transverse tubule enzyme is less temperature or pH dependent than the Ca2+-ATPase of sarcoplasmic reticulum and hydrolyzes equally well ATP, ITP, UTP, CTP, and GTP. Of several ionic, non-ionic, and zwitterionic detergents tested, only lysolecithin solubilizes the transverse tubule membrane while preserving ATPase activity. After extraction of about 50% of the transverse tubule proteins by solubilization with lysolecithin most of the ATPase activity remains membrane bound, indicating that the Ca2+- or Mg2+-ATPase is an intrinsic membrane enzyme. A second extraction of the remaining transverse tubule proteins with lysolecithin results in solubilization and partial purification of the enzyme. Sedimentation of the Ca2+- or Mg2+-ATPase, partially purified by lysolecithin solubilization, through a continuous sucrose gradient devoid of detergent leads to additional purification, with an overall 3- to 5-fold purification factor. The purified enzyme preparation contains two main protein components of molecular weights 107,000 and 30,000. Cholesterol, which is highly enriched in the transverse tubule membrane, copurifies with the enzyme. Transverse tubule membrane vesicles also display ATP-dependent calcium transport which is not affected by phosphate or oxalate. The possibility that the Ca2+- or Mg2+-ATPase is the enzyme responsible for the Ca2+ transport displayed by isolated transverse tubules is discussed.     

Membrane adenosine triphosphatase activities in rat pancreas

The membrane ATPase activities present in rat pancreas were studied to investigate the possible role of ATPase enzymes in HCO3(-) secretion in the pancreas. It was found that all the HCO3(-)-sensitive (anion-sensitive) ATPase activity was accountable as pancreatic mitochondrial ATPase, thus supporting the view that a distinct plasma membrane 'bicarbonate-ATPase' is not involved in HCO3(-) secretion in pancreas. A remarkably high Mg+- and CA2+-requiring ATPase activity (30 mumol ATP hydrolysed/min per mg) was found in the plasma membrane fraction (rho = 1.10-1.13). This activity has been characterized in some detail. It is inhibited by p-fluorosulfonylbenzoyladenosine, an affinity label analogue of ATP and the analogue appears to label covalently a protein of Mr approximately 35 000. The (Ca2+ + Mg2+)-ATPase activity did not form a 'phosphorylated-intermediate' and was vanadate-insensitive. These and other tests have served to demonstrate that the (Ca2+ + Mg2+)-ATPase activity is different in properties from (Na+ + K+)-ATPase, Ca2+-ATPase, (H+ + K+)-ATPase or mitochondrial H+-ATPase. Apart from the (Ca2+ + Mg2+)-ATPase of plasma membrane and mitochondrial ATPase, the only other membrane ATPase activities noted were (Na+ + K+)-ATPase, which occurred in the same fractions as the (Ca2+ + Mg2+)-AtPase at rho = 1.10-1.13 and was of surprisingly low activity, and an ATPase activity in light membrane fractions (rho - 1.08-1.09) derived from zymogen granule membranes. At this time, therefore, there is no obvious candidate for an ATPase activity at the luminal surface of pancreatic cells which is directly involved in ion transport, but the results presented here direct attention to the high activity (Ca2+ + Mg2+)-ATPase in the plasma membrane fraction.     

A calcium pump in plasma membrane vesicles from Leishmania braziliensis

A subcellular fraction highly enriched in plasma membrane vesicles was prepared from Leishmania promastigotes. This fraction showed (Ca2+ + Mg2+)-ATPase activity. This, however, represented a small fraction (about 25%) of the overall ATPase activity. The Ca2(+)-ATPase showed general characteristics common to plasma membrane ATPases involved in Ca2+ transport. Thus, the Ca2(+)-ATPase was activated by Ca2+ with a high affinity (Km about 0.7 microM), saturating at about 5 microM Ca2+. Furthermore, it was stimulated by calmodulin (about 70-80% with 5 micrograms/ml) and almost fully inhibited by trifluoperazine (100 microM). The above vesicles accumulated Ca2+ against a concentration gradient and released it after the addition of A23187, as shown independently by 45Ca2+ and Arsenazo III studies. The transport mechanism showed the same kinetics parameters as described for the enzyme, indicating a single molecular entity. In addition, Ca2(+)-ATPase activity and Ca2+ uptake were completely inhibited by vanadate (20 microM), indicating that an E1-E2 type mechanism is involved. The results clearly demonstrate the presence of a Ca2+ pump in the plasma membrane of Leishmania which is capable of maintaining a low cytoplasmic Ca2+ concentration.     

Ultrastructural localization of the Ca2+ + Mg2+-dependent ATPase of sarcoplasmic reticulum in rat skeletal muscle by immunoferritin labeling of ultrathin frozen sections

The ultrastructural localization of the Ca2+ + Mg2+-dependent ATPase of sarcoplasmic reticulum in rat gracilis muscle was determined by indirect immunoferritin labeling of ultrathin frozen sections. Simultaneous visualization of ferritin particles and of adsorption- stained cellular membranes showed that the Ca2+ + Mg2+-ATPase was concentrated in the longitudinal sarcoplasmic reticulum and in the nonjunctional regions of the terminal cisternae membrane but was virtually absent from mitochondria, plasma membranes, transverse tubules, and junctional sarcoplasmic reticulum. Ferritin particles were found preponderantly on the cytoplasmic surface of the membrane, in agreement with published data showing an asymmetry of the Ca2+ + Mg2+- ATPase within the sarcoplasmic reticulum membrane. Comparison of the density of ferritin particles in fast and slow myofibers suggested that the density of the Ca2+ + Mg2+-ATPase in the sarcoplasmic reticulum membrane in a fast myofiber is approximately two times higher than in a slow myofiber.     

Localization of Mg2+-ATPase in the membranes of the skeletal muscles and myocardium of the frog Rana temporaria

Using differential centrifugation in sucrose density gradient, from muscles of the frog fractions were obtained which contain fragments of sarcolemma, as well as membranes of T-system tubules and sarcoplasmic reticulum. In isolated membrane fractions, studies were made on the activity of cation-stimulated ATPases (Na+, K+-, Ca2+, Mg2+- and Mg2+-ATPases). Enzymic and electrophoretic analyses showed that the highest content of Mg2+-ATPases is typical of the fractions which are located on the surface of 35% sucrose. The data obtained indicate that Mg2+-ATPase is the enzyme which is specific for the membranes of T-system tubules in skeletal muscles of not only birds but amphibians as well. From cardiac muscle of the frog, membrane fraction was isolated which is similar (with respect to its predominant content of Mg2+-ATPase) to the membranes of T-system tubules. It is suggested that the presence of Mg2+-ATPase in these membranes is a common property of phasic striated muscle fibers in all mature vertebrate animals.     

Conformational changes of adrenocorticotropin peptides upon interaction with lipid membranes revealed by infrared attenuated total reflection spectroscopy

Infrared attenuated total reflection (IR-ATR) spectroscopy was used to study conformational and topological aspects of the interaction between two adrenocorticotropin fragments and dioleoylphosphatidylcholine membranes. Corticotropin-(1-10)-decapeptide, ACTH1-10, was found to exist as a rigid antiparallel pleated sheet structure in dry membranes. In aqueous environment, it completely escaped from the lipid. This dominant preference for the aqueous phase is a possible explanation for the very low biological potency of ACTH1-10 in some assays. On the other hand, the very potent corticotropin-(1-24)-tetracosapeptide, ACTH1-24, was firmly incorporated into dry and wet membranes. Aqueous environment even promoted the peptide-lipid interaction. Under these latter conditions, part of the molecule entered the bilayer and adopted a helical structure with the axis oriented perpendicularly to the bilayer plane. Contact of a 0.1 mM solution of ACTH1-24 in liquid deuterium oxide with the pure lipid membrane system resulted in measurable adsorption of the peptide to the membrane with the same conformational and topological characteristics as described above (perpendicularly oriented helix entering the bilayer). The helical part of the ACTH1-24 molecule entering the bilayer was the quite hydrophobic N-terminal decapeptide unit ("message" segment). The adjacent hydrophilic C-terminal tetradecapeptide unit ("address" segment) remained on the membrane surface. As the message region is essential for triggering corticotropin receptors, its intrusion into the membrane and its adoption of an oriented, helical conformation may facilitate receptor stimulation.     

Structure of the cytochrome c oxidase dimer electron microscopy of two-dimensional crystals

We have studied the structure of beef heart mitochondrial cytochrome c oxidase dimers by image-processing of electron micrographs of the vesicle crystal form. Specimens were prepared by different procedures, which contrast different features of the crystals. Heavy-atom shadowing of freeze-dried crystals contrasts the exterior or M-side surface (mitochondrial matrix-side) and reveals a 100 Å long ellipsoidal dimer oriented with its long axis in the (?1, 1) direction of the 95 Å × 125 Å rectangular unit cell. The M-side surface structure correlates well with the intra-bilayer structure revealed by contrast matching extra-bilayer protein with glucose. Frozen suspensions of vesicle crystals fracture predominantly along hydrophilic surfaces revealing the interior C-side (mitochondrial cytoplasm-facing surface) of vesicle crystals. The C-side surface revealed in shadowed replicas of fracture surfaces shows the ends of the dimers furthest from the bilayer surface; they consist of two structural domains separated by 70 to 80 Å. We present a new interpretation of the structure of the cytochrome oxidase dimer based on these data and on the y-shaped monomer structure described by Fuller et al. (1979). A cytochrome oxidase dimer is formed from two y-shaped monomers joined along one set of identical M-domain arms with the other arms approximately 70 Å apart along a unit cell diagonal in the (?1, 1) direction. The arms of the monomers lie within and perpendicular to the phospholipid bilayer, and they protrude approximately 25 Å beyond the bilayer surface on the M-side. The y tails represent the C-side domains, which are closely apposed across the dimer 2-fold axis near the C-side bilayer surface. Further away from the bilayer surface, C-side domains split away from one another forming a large cleft.     

Direct evidence for the cytoplasmic location of the NH2- and COOH-terminal ends of the Neurospora crassa plasma membrane H+-ATPase

Reconstituted proteoliposomes containing Neurospora plasma membrane H+-ATPase molecules oriented predominantly with their cytoplasmic portion facing outward have been used to determine the location of the NH2 and COOH termini of the H+-ATPase relative to the lipid bilayer. Treatment of the proteoliposomes with trypsin in the presence of the H+-ATPase ligands Mg2+, ATP, and vanadate produces approximately 97-, 95-, and 88-kDa truncated forms of the H+-ATPase similar to those already known to result from cleavage at Lys24, Lys36, and Arg73 at the NH2-terminal end of the molecule. These results establish that the NH2-terminal end of the H+-ATPase polypeptide chain is located on the cytoplasmic side of the membrane. Treatment of the same proteoliposome preparation with trypsin in the absence of ligands releases approximately 50 water-soluble peptides from the proteoliposomes. Separation of the released peptides by high performance liquid chromatography and spectral analysis of the purified peptides identified only a few peptides with the properties expected of a COOH-terminal, tryptic undecapeptide with the sequence SLEDFVVSLQR, and NH2-terminal amino acid sequence analysis identified this peptide among the possible candidates. Quantitative considerations indicate that this peptide must have come from H+-ATPase molecules oriented with their cytoplasmic portion facing outward, and could not have originated from a minor population of H+-ATPase molecules of reverse orientation. These results directly establish that the COOH-terminal end of the H+-ATPase is also located on the cytoplasmic side of the membrane. These findings are important for elucidating the topography of the membrane-bound H+-ATPase and are possibly relevant to the topography of other aspartyl-phosphoryl-enzyme intermediate ATPases as well.     

Electron spin resonance and steady-state fluorescence polarization studies of lipid bilayers containing integral proteins

We derive equations that describe changes in the steady-state fluorescence polarization of the probe 1,6-diphenyl-1,3,5-hexatriene (DPH) or in the spectrum of electron spin resonance (ESR) nitroxide spin-labeled lipid probes as a function of the intrinsic molecule concentration in lipid bilayer membranes. We make use of an assumption used by us in an earlier paper. The equations are independent of any membrane model. They are valid when a DPH probe or a spin-labeled chain is equivalent to an unlabeled lipid hydrocarbon chain only as far as their general space-filling properties are concerned. We consider cases where the bilayer is either in a single homogeneous phase or in a two-phase region. We apply our equations to analyze ESR data from delipidated sarcoplasmic reticulum membranes and from egg yolk phosphatidylcholine bilayers containing Ca2+-ATPase, and DPH data from dipalmitoylphosphatidylcholine (DPPC) bilayers containing Ca2+-ATPase, both for T greater than Tc. The following conclusions were derived: (i) Ca2+-ATPase oligomers are "randomly" distributed, for the concentrations studied, in the fluid phase. (ii) There is no fixed stoichiometric ratio of "boundary" lipids and oligomers. (iii) Between 24k and 28k lipid molecules are able to surround each isolated oligomer composed of k Ca2+-ATPase monomers. Finally, we apply our equations to analyze DPH studies on DPPC bilayers containing Ca2+-ATPase for T less than Tc. We find that the results reported are in accord with the predictions of the model. In the Appendix, we show that an analytical expression for probabilities used by us is in very good agreement with the results of computer simulation.     

The role of Ca2+-ATpase and its hydrophobic component in the release of Ca2+ from skeletal muscle sarcoplasmic reticulum

The Ca2+ permeability of proteoliposomes containing Ca2+-ATPase of sarcoplasmic reticulum and its hydrophobic fragment was investigated, using the method of synthetic penetrant ions and the radioisotopic method. The former method was used to determine the diffusional membrane potential formed by Ca2+ concentration gradient. It was demonstrated that Ca2+-ATPase, whose active center is oriented outside, has and asymmetric conductivity, i. e., it facilitates the rapid efflux of Ca2+ from proteoliposomes. This efflux is stimulated by the membrane potential positive inside. The hydrophobic fragment of Ca2+-ATPase forms a Ca2+-channel with a high conductivity for Ca2+. This channel is responsible for the Ca2+ efflux from sarcoplasmic reticulum.