Zwitterionic polymersomes in an ionic liquid: room temperature TEM characterization

Conventional transmission electron microscopy (TEM) was utilized to characterize vesicles formed by the spontaneous self-assembly of a novel zwitterionic block copolymer in the ionic liquid (2-hydroxyethyl)dimethylammonium methanesulfonate as well as in 0.1 M phosphate buffered saline (PBS). This block copolymer was synthesized via ring-opening metathesis polymerization (ROMP) of a norbornene-based sulfobetaine, followed by its end-functionalization with polystyrene to generate the necessary amphiphilic structure. The ionic liquid enabled the visualization of the vesicles in their swollen state by TEM, demonstrating a new method for improved characterization of polymer vesicles.     

Novel injectable pH and temperature sensitive block copolymer hydrogel

A novel pH and temperature sensitive block copolymer was prepared by adding pH sensitive moiety to temperature sensitive block copolymer. This block copolymer solution showed a reversible sol-gel transition by a small pH change in the range of pH 7.4-8.0 and also by the temperature change in the region of body temperature. The very precise molecular weight control of block copolymer and the prudential tuning of hydrophilic-hydrophobic balance were needed to control the phase diagram. This block copolymer solution forms a gel at 37 degrees C, pH 7.4 (human body). When the block copolymer solution is at room temperature and pH 8.0 as a sol state, both the temperature and pH change are needed for the gelation. This material can be employed as injectable carriers for hydrophobic drugs and proteins, etc. Gelation inside the needle can be prevented by an increase in the temperature during injection, because it does not change into the gel form with only increasing temperature. This material can be used for even a long guide catheter into the body. The block copolymer hydrogel which shows the sol-gel transition by the small pH change from pH 8.0 to pH 7.4 has merits in the delivery system for protein and cells which show cytotoxicity in acidic (below pH 6.5) or basic (above pH 8.5) conditions. This block copolymer system could be used as a template technology for injectable delivery systems.     

Transmembrane electron transport in sealed and NAD(P)H-loaded right-side-out plasma membrane vesicles isolated from maize (Zea mays L.) roots

Electron transport across plasma membranes has been observed in vivo in several plant species and tissues after the application of ferricyanide (hexacyanoferrate III, HCF III). In the present work, a transmembrane electron flow was demonstrated in sealed and NAD(P)H-loaded right-side-out (apoplastic-side-out) plasma membrane vesicles isolated from maize (Zea mays L.) roots. HCF III was reduced at a rate of up to 126 nmol min(-1) mg(-1) protein by NADPH-loaded vesicles, while reduction rates with NADH-loaded vesicles were several-fold lower. Coincident with the reduction of HCF III, NAD(P)H oxidation was observed inside the vesicles. The dependence of reduction on K+ indicated an electrogenic transmembrane electron flow. Application of 100 microM calcium decreased HCF III reduction up to 66%, while pre-incubation with 200 microM warfarin or diphenylene iodonium inhibited transmembrane electron transport only weakly. Fe(3+)-EDTA was not reduced significantly by NADPH-loaded plasma membrane vesicles, whereas XTT was reduced at a rate of 765 pmol min(-1) mg(-1) protein. The results suggested a major function for NADPH in transmembrane electron flow and were discussed in conjunction with in vivo experiments.     

Addition of Block Copolymers to Liposomes Prepared Using Soybean Lecithin. Effects on Formation,Stability and the Specific Localization of the Incorporated Surfactants Investigated

Abstract

Soybean lecithin disperses into water forming multilamellar liposomes, which on sonication produce vesicles of the order of 40–50nm (diameter), as determined by Photon Correlation Spectroscopy (PCS). The effect of concentration of lecithin and sonication time was systematically investigated. Vesicles were then prepared by incorporation of A – B – A block copolymers of polyethylene oxide (PEO) and polypropylene oxide(PPO), i.e.(PEO-PPO-PEO), in order to construct systems of increased steric stability. The effect of the molecular weight of the PEO and PPO chains on the vesicle size was systematically studied by using various molecules to prepare the vesicles. Initial addition of these (tri-)block copolymers causes an increase in the size of the vesicles. This increase continues until a certain concentration of block copolymer is reached, after which a decrease in size is observed. The initial increase was thought to be due to the incorporation of the block copolymer onto the vesicle bilayer. The reduction at high surfactant concentration is thought to be due to solubilization of the bilayer and the ultimate breakdown of the vesicles. Electrophoresis experiments showed a reduction in the ξ-potential of the vesicles on incorporation of the block copolymer which can be attributed to the shift of the shear plane. Various models are presented to describe this incorporation. The vesicles prepared using the block copolymers are believed to enhance the steric effects and so lead to more stable and pharmaceutically optimum systems.     

Signals for COPII-dependent export from the ER: what's the ticket out?

Export of many secretory proteins from the endoplasmic reticulum (ER) relies on signal-mediated sorting into ER-derived transport vesicles. Recent work on the coat protein complex II (COPII) provides new insight into the mechanisms and signals that govern this selective export process. Conserved di-acidic and di-hydrophobic motifs found in specific transmembrane cargo proteins are required for their selection into COPII-coated vesicles. These signaling elements are cytoplasmically exposed and recognized by subunits of the COPII coat. Certain soluble cargo molecules depend on receptor-like proteins for efficient ER export, although signals that direct soluble cargo into ER-derived vesicles are less defined.     

Synthesis, swelling behavior, and biocompatibility of novel physically cross-linked polyurethane-block-poly(glycerol methacrylate) hydrogels

Physically cross-linked novel block copolymer hydrogels with tunable hydrophilic properties for biomedical applications were synthesized by controlled radical polymerization of polyurethane macroiniferter and (2,2-dimethyl-1,3-dioxolane) methyl methacrylate. The block copolymers were converted to hydrogels by the selective hydrolysis of poly[(2,2-dimethyl-1,3-dioxolane) methyl methacrylate] block to poly(glycerol methacrylate). The block copolymerization has been monitored by monomer conversion and molecular weight increase as a function of time. It was observed that the polymerization proceeded with a characteristic "living" behavior where both monomer conversion and molecular weight increased linearly, with increasing reaction time. The resulting hydrogels were investigated for their equilibrium water content (EWC), dynamic water contact angles, swelling kinetics, thermodynamic interaction parameters, plasma protein adsorption, and platelet adhesion. Similar to our previous mechanically responsive hydrogels (Mequanint, K.; Sheardown, H. J. Biomater. Sci. Polym. Ed. 2005, 10, 1303-1318), the present results indicated that block copolymer hydrogels have excellent hydrophilicity and swelling behavior with improved modulus of elasticity. The equilibrium swelling was affected by the hydrolysis time, block length of poly(glycerol methacrylate), temperature, and the presence of soluble salts. Fibrinogen adsorption and platelet adhesion were significantly lower for the hydrogels than for the control polyurethane, whereas albumin adsorption increased for the hydrogels in proportion to the contents of poly(glycerol methacrylate). These hydrogels have potential in a number of biomedical applications such as drug delivery and scaffolds for tissue engineering.     

Erv26p directs pro-alkaline phosphatase into endoplasmic reticulum-derived coat protein complex II transport vesicles

Secretory proteins are exported from the endoplasmic reticulum (ER) in transport vesicles formed by the coat protein complex II (COPII). We detected Erv26p as an integral membrane protein that was efficiently packaged into COPII vesicles and cycled between the ER and Golgi compartments. The erv26Delta mutant displayed a selective secretory defect in which the pro-form of vacuolar alkaline phosphatase (pro-ALP) accumulated in the ER, whereas other secretory proteins were transported at wild-type rates. In vitro budding experiments demonstrated that Erv26p was directly required for packaging of pro-ALP into COPII vesicles. Moreover, Erv26p was detected in a specific complex with pro-ALP when immunoprecipitated from detergent-solublized ER membranes. Based on these observations, we propose that Erv26p serves as a transmembrane adaptor to link specific secretory cargo to the COPII coat. Because ALP is a type II integral membrane protein in yeast, these findings imply that an additional class of secretory cargo relies on adaptor proteins for efficient export from the ER.     

The absence of Emp24p, a component of ER-derived COPII-coated vesicles, causes a defect in transport of selected proteins to the Golgi.

Emp24p is a type I transmembrane protein that is involved in secretory protein transport from the endoplasmic reticulum (ER) to the Golgi complex. A yeast mutant that lacks Emp24p (emp24 delta) is viable, but periplasmic invertase and the glycosylphosphatidyl-inositol-anchored plasma membrane protein Gas1p are delivered to the Golgi apparatus with reduced kinetics, whereas transport of alpha-factor, acid phosphatase and two vacuolar proteins is unaffected. Oligomerization and protease digestion studies of invertase suggest that the selective transport phenotype observed in the emp24 delta mutant is not due to a defect in protein folding or oligomerization. Consistent with a role in ER to Golgi transport, Emp24p is a component of COPII-coated, ER-derived transport vesicles that are isolated from a reconstituted in vitro budding reaction. We propose that Emp24p is involved in the sorting and/or concentration of a subset of secretory proteins into ER-derived transport vesicles.     

Determinants of membrane-targeting and transmembrane translocation during bacterial protein export.

We have separately analyzed membrane-targeting and membrane translocation of an exported bacterial protein. The precursor of the outer membrane protein LamB of Escherichia coli was synthesized in vitro and translocated into inverted plasma membrane vesicles under co- and post-translational conditions. The translation/translocation products of LamB were subsequently resolved into soluble and membrane-associated material. Dissipation of the H(+)-motive force, depletion of ATP and treatment of membranes with N-ethylmaleimide each inhibited processing and translocation of preLamB without preventing its binding to the membranes. Hence, all three conditions block transmembrane passage rather than membrane-targeting. The latter was abolished by pretreatment of salt-extracted membrane vesicles with trypsin. It was also drastically reduced when preLamB was synthesized in cell extracts derived from either a secA amber or a secB null mutant. Membrane-targeting of preLamB therefore requires soluble SecA and SecB as well as a protease-sensitive membrane receptor. The finding that SecA is involved in targeting whereas ATP is required for the transmembrane passage suggests that SecA, which harbors an ATPase activity [Lill et al. (1989), EMBO J., 8, 961-966], might have a dual function in bacterial protein export.     

Insertion kinetics of a denatured alpha helical membrane protein into phospholipid bilayer vesicles

Membrane protein folding has suffered from a lack of detailed kinetic studies, particularly with regard to the insertion of denatured protein into lipid bilayers. We present a detailed in vitro kinetic study of the association of a denatured, transmembrane alpha helical protein with lipid vesicles. The mechanism of folding of Escherichia coli diacylglycerol kinase from a partially denatured state in urea has been investigated. The protein associates with lipid vesicles to give a protein, vesicle complex with an apparent association constant of 2 x 10(6) M(-1) s(-1). This association rate approaches the diffusion limit of the protein, vesicle reaction. The association of the protein with lipid vesicles is followed by a slower process occurring at observed rate of 0.031 s(-1), involving insertion into the bilayer and generation of a functional oligomer of diacylglycerol kinase. Protein aggregation competes with vesicle insertion. The urea-denatured protein monomers begin to aggregate as soon as the urea is diluted. This aggregation is faster than the association of the protein with vesicles so that most protein aggregates before it inserts into a vesicle. Increasing the vesicle concentration favours insertion of protein monomers, but at high vesicle concentrations monomers are primarily in separate vesicles and do not associate to form functional oligomers. Irreversible aggregation limits the yield of functional protein, while the data also suggest that lipid vesicles can reverse another aggregation reaction, leading to the recovery of correctly folded protein.     

Functional characterization of amphipathic α-helix in the osmoregulatory ABC transporter OpuA

The ATP-binding-cassette transporter OpuA from Lactococcus lactis is composed of two ATPase subunits (OpuAA) and two subunits (OpuABC) with the transmembrane domain fused to an extracellular substrate-binding protein. Of the almost 1900 homologues of OpuA known to date, a subset has an amino-terminal amphipathic helix (plus extra transmembrane segment) fused to the core of the transmembrane domain of the OpuABC subunit. FRET measurements indicate that the amphipathic α-helix is located close to the membrane surface, where its hydrophobic face interacts with the transport protein rather than the membrane lipids. Next, we determined the functional role of this accessory region by engineering the amphipathic α-helix. We analyzed the consequence of the mutations in intact cells by monitoring growth and transport of glycine betaine under normal and osmotic stress conditions. More detailed studies were performed in hybrid membrane vesicles, proteoliposomes, and bilayer nanodisks. We show that the amphipathic α-helix of OpuA is necessary for high activity of OpuA but is not critical for the biogenesis of the protein or the ionic regulation of transport.     

Role of autophagy,SQSTM1, SH3GLB1, and TRIM63 in the turnover of nicotinic acetylcholine receptors

Removal of ubiquitinated targets by autophagosomes can be mediated by receptor molecules, like SQSTM1, in a mechanism referred to as selective autophagy. While cytoplasmic protein aggregates, mitochondria, and bacteria are the best-known targets of selective autophagy, their role in the turnover of membrane receptors is scarce. We here showed that fasting-induced wasting of skeletal muscle involves remodeling of the neuromuscular junction (NMJ) by increasing the turnover of muscle-type CHRN (cholinergic receptor, nicotinic/nicotinic acetylcholine receptor) in a TRIM63-dependent manner. Notably, this process implied enhanced production of endo/lysosomal carriers of CHRN, which also contained the membrane remodeler SH3GLB1, the E3 ubiquitin ligase, TRIM63, and the selective autophagy receptor SQSTM1. Furthermore, these vesicles were surrounded by the autophagic marker MAP1LC3A in an ATG7-dependent fashion, and some of them were also positive for the lysosomal marker, LAMP1. While the amount of vesicles containing endocytosed CHRN strongly augmented in the absence of ATG7 as well as upon denervation as a model for long-term atrophy, denervation-induced increase in autophagic CHRN vesicles was completely blunted in the absence of TRIM63. On a similar note, in trim63^?/? mice denervation-induced upregulation of SQSTM1 and LC3-II was abolished and endogenous SQSTM1 did not colocalize with CHRN vesicles as it did in the wild type. SQSTM1 and LC3-II coprecipitated with surface-labeled/endocytosed CHRN and SQSTM1 overexpression significantly induced CHRN vesicle formation. Taken together, our data suggested that selective autophagy regulates the basal and atrophy-induced turnover of the pentameric transmembrane protein, CHRN, and that TRIM63, together with SH3GLB1 and SQSTM1 regulate this process.     

Botulinum neurotoxin C1 blocks neurotransmitter release by means of cleaving HPC-1/syntaxin.

The anaerobic bacterium Clostridium botulinum produces several related neurotoxins that block exocytosis of synaptic vesicles in nerve terminals and that are responsible for the clinical manifestations of botulism. Recently, it was reported that botulinum neurotoxin type B as well as tetanus toxin act as zinc-dependent proteases that specifically cleave synaptobrevin, a membrane protein of synaptic vesicles (Link et al., Biochem. Biophys. Res. Commun., 189, 1017-1023; Schiavo et al., Nature, 359, 832-835). Here we report that inhibition of neurotransmitter release by botulinum neurotoxin type C1 was associated with the proteolysis of HPC-1 (= syntaxin), a membrane protein present in axonal and synaptic membranes. Breakdown of HPC-1/syntaxin was selective since no other protein degradation was detectable. In vitro studies showed that the breakdown was due to a direct interaction between HPC-1/syntaxin and the toxin light chain which acts as a metallo-endoprotease. Toxin-induced cleavage resulted in the generation of a soluble fragment of HPC-1/syntaxin that is 2-4 kDa smaller than the native protein. When HPC-1/syntaxin was translated in vitro, cleavage occurred only when translation was performed in the presence of microsomes, although a full-length product was obtained in the absence of membranes. However, susceptibility to toxin cleavage was restored when the product of membrane-free translation was subsequently incorporated into artificial proteoliposomes. In addition, a translated form of HPC-1/syntaxin, which lacked the putative transmembrane domain at the C-terminus, was soluble and resistant to toxin action. We conclude that HPC-1/syntaxin is involved in exocytotic membrane fusion.(ABSTRACT TRUNCATED AT 250 WORDS)     

Improved tumor targeting of polymer-based nanovesicles using polymer-lipid blends

Block copolymer-based vesicles have recently garnered a great deal of interest as nanoplatforms for drug delivery and molecular imaging applications due to their unique structural properties. These nanovesicles have been shown to direct their cargo to disease sites either through enhanced permeability and retention or even more efficiently via active targeting. Here, we show that the efficacy of nanovesicle targeting can be significantly improved when prepared from polymer-lipid blends compared with block copolymer alone. Polymer-lipid hybrid nanovesicles were produced from the aqueous coassembly of the diblock copolymer, poly(ethylene oxide)-block-polybutadiene (PEO-PBD), and the phospholipid, hydrogenated soy phosphatidylcholine (HSPC). The PEG-based vesicles, 117 nm in diameter, were functionalized with either folic acid or anti-HER2/neu affibodies as targeting ligands to confer specificity for cancer cells. Our results revealed that nanovesicles prepared from polymer-lipid blends led to significant improvement in cell binding compared to nanovesicles prepared from block copolymer alone in both in vitro cell studies and murine tumor models. Therefore, it is envisioned that nanovesicles composed of polymer-lipid blends may constitute a preferred embodiment for targeted drug delivery and molecular imaging applications.     

Mechanism of Atg9 recruitment by Atg11 in the cytoplasm-to-vacuole targeting pathway

Autophagy is a lysosomal degradation pathway for the removal of damaged and superfluous cytoplasmic material. This is achieved by the sequestration of this cargo material within double-membrane vesicles termed autophagosomes. Autophagosome formation is mediated by the conserved autophagy machinery. In selective autophagy, this machinery including the transmembrane protein Atg9 is recruited to specific cargo material via cargo receptors and the Atg11/FIP200 scaffold protein. The molecular details of the interaction between Atg11 and Atg9 are unclear, and it is still unknown how the recruitment of Atg9 is regulated. Here we employ NMR spectroscopy of the N-terminal disordered domain of Atg9 (Atg9-NTD) to map its interaction with Atg11 revealing that it involves two short peptides both containing a PLF motif. We show that the Atg9-NTD binds to Atg11 with an affinity of about 1 μM and that both PLF motifs contribute to the interaction. Mutation of the PLF motifs abolishes the interaction of the Atg9-NTD with Atg11, reduces the recruitment of Atg9 to the precursor aminopeptidase 1 (prApe1) cargo, and blocks prApe1 transport into the vacuole by the selective autophagy-like cytoplasm-to-vacuole (Cvt) targeting pathway while not affecting bulk autophagy. Our results provide mechanistic insights into the interaction of the Atg11 scaffold with the Atg9 transmembrane protein in selective autophagy and suggest a model where only clustered Atg11 when bound to the prApe1 cargo is able to efficiently recruit Atg9 vesicles.     

Membrane insertion and dissociation processes of a model transmembrane helix

An important subject for elucidating membrane protein (MP) folding is how transmembrane helices (TMHs) insert into and dissociate from membranes. We investigated helix dissociation kinetics and insertion topology by means of intervesicular transfer of the fluorophore-labeled completely hydrophobic model transmembrane helix NBD-(LALAAAA)(3)-NH(2) (NBD = 7-nitro-2-1,3-benzoxadiazol-4-yl). The peptide forms a topologically stable transmembrane helix, which is in a monomer-antiparallel dimer equilibrium [Yano, Y., Takemoto, T., Kobayashi, S., Yasui, H., Sakurai, H., Ohashi, W., Niwa, M., Futaki, S., Sugiura, Y., and Matsuzaki, K. (2002) Biochemistry 41, 3073-3080]. The helix transfer kinetics, representing the helix dissociation process, was monitored by fluorescence recovery of the quenched peptide in donor vesicles containing a quencher upon its transfer to acceptor vesicles without the quencher. The transfer kinetics and vesicle concentration dependence demonstrated that the transfer was mediated by monomer in the aqueous phase. Furthermore, the activation enthalpy was estimated to be +17.7 +/- 1.3 kcal mol(-1). Helix insertion topology, detected by chemical quenching of the NBD group in the outer leaflet by dithionite ions, was found to be controlled by transmembrane electric potential-helix macro dipole interaction. On the basis of these observations, a model for the helix insertion/dissociation processes was discussed.     

Block versus random amphiphilic copolymers as antibacterial agents

We examined the antibacterial and hemolytic activities in a series of amphiphilic block and random copolymers of poly(vinyl ether) derivatives prepared by base-assisting living cationic polymerization. Block and random amphiphilic copolymers with similar monomer compositions showed the same level of activity against Escherichia coli . However, the block copolymers are much less hemolytic compared to the highly hemolytic random copolymers. These results indicate that the amphiphilic copolymer structure is a key determinant of activity. Furthermore, the block copolymers induced dye leakage from lipid vesicles consisting of E. coli -type lipids, but not mammalian lipids, while the random copolymers disrupted both types of vesicles. In addition, both copolymers displayed bactericidal and hemolytic activities at concentrations 1 or 2 orders of magnitude lower than their critical (intermolecular) aggregation concentrations (CACs), as determined by light scattering measurements. This suggests that polymer aggregation or macromolecular assembly is not a requisite for the antibacterial activity and selectivity against bacteria over human red blood cells (RBCs). We speculate that different single-chain conformations between the block and random copolymers play an important role in the antibacterial action and underlying antibacterial mechanisms.     

Endoplasmic reticulum composition and form: Proteins in and out

The endoplasmic reticulum (ER) is the main harbor for newly synthesized proteins in eukaryotic cells. Through a continuous membrane network of sheets and tubules, the ER hosts secretory proteins, integral membrane proteins, and luminal proteins of the endomembrane system. These proteins are translated by ribosomes outside the ER and require subsequent integration into or translocation across the lipid bilayer of the ER. They are then modified post-translationally and folded in the ER. Some of these proteins are packaged into coat protein complex II–coated vesicles for export. Here, we review recent advances in understanding the mechanism of protein translocation and transmembrane domain insertion in the ER, summarize new insights into selective cargo packaging, and discuss the roles of ER morphological dynamics in these processes.     

Exo70p mediates the secretion of specific exocytic vesicles at early stages of the cell cycle for polarized cell growth

In budding yeast, two classes of post-Golgi secretory vesicles carrying different sets of cargoes typified by Bgl2p and invertase are delivered to the plasma membrane for secretion. The exocyst is implicated in tethering these vesicles to the daughter cell membrane for exocytosis. In this study, we report that mutations in the exocyst component Exo70p predominantly block secretion of the Bgl2p vesicles. Furthermore, a defect in invertase vesicle trafficking caused by vps1Delta or pep12Delta in the exo70 mutant background is detrimental to the cell. The secretion defect in exo70 mutants was most pronounced during the early budding stage, which affected daughter cell growth. The selective secretion block does not occur at the vesicle formation or sorting stage because the exocytic vesicles are properly generated and protein processing is normal in the exo70 mutants. Our study suggests that Exo70p functions primarily at early stages of the cell cycle in Bgl2p vesicle secretion, which is critical for polarized cell growth.     

Genetic engineering of structural protein polymers.

Genetic and protein engineering are components of a new polymer chemistry that provide the tools for producing macromolecular polyamide copolymers of diversity and precision far beyond the current capabilities of synthetic polymer chemistry. The genetic machinery allows molecular control of chemical and physical chain properties. Nature utilizes this control to formulate protein polymers into materials with extraordinary mechanical properties, such as the strength and toughness of silk and the elasticity and resilience of mammalian elastin. The properties of these materials have been attributed to the presence of short repeating oligopeptide sequences contained in the proteins, fibroin, and elastin. We have produced homoblock protein polymers consisting exclusively of silk-like crystalline blocks and elastin-like flexible blocks. We have demonstrated that each homoblock polymer as produced by microbial fermentation exhibits measurable properties of crystallinity and elasticity. Additionally, we have produced alternating block copolymers of various amounts of silk-like and elastin-like blocks, ranging from a ratio of 1:4 to 2:1, respectively. The crystallinity of each copolymer varies with the amount of crystalline block interruptions. The production of fiber materials with custom-engineered mechanical properties is a potential outcome of this technology.