Tunable emission from LiBaBO3:Eu3+;Bi3+ phosphor for solid‐state lighting

Europium (Eu³⁺) and bismuth (Bi³⁺) co‐activated LiBaBO₃ powder phosphors were synthesized by a solid‐state reaction and the structure, particle morphology, optical and photoluminescent properties were investigated. X‐Ray diffraction patterns of the LiBaBO₃ phosphors crystallized in a pure monoclinic phase, i.e. there were no secondary phases due to either incidental impurities or undecomposed starting materials. Scanning electron microscopy images showed that the powders were made up of fluffy needle‐like particles that were randomly aligned. The band‐gap of the LiBaBO₃ host was estimated to be 3.33 eV from the UV/vis absorption data. Blue emission was observed from the LiBaBO₃ host, which is ascribed to self‐activation of the host matrix. In addition, greenish‐blue (493 nm) and red (613 nm) emissions were observed from europium‐doped samples and were attributed to the emissions of Eu²⁺ and Eu³⁺, respectively. Furthermore, after codoping with Bi³⁺, the emission intensity of Eu³⁺ located at 613 nm was significantly enhanced. From the Commission Internationale de I′Eclairage (CIE) color coordinates, white emission was observed from LiBa_1–xBO₃:xEu³⁺ (x = 0.020 and 0.025) phosphor powders with color coordinates of x = 0.368, y = 0.378 and x = 0.376, y = 0.366, respectively.     

Investigation on luminescence properties of Eu2+‐doped Ba3Al2O5Cl2 phosphor for near‐UV‐excited white LEDs

Ba₃Al₂O₅Cl₂:Eu²⁺ phosphor was prepared by combustion synthesis (CS). The prepared phosphor was excited at 329 nm; the phosphors shows an efficient bluish‐green wide‐band emission centred at 490 nm, which originates from the 4f⁶d¹ → 4f⁷ transition of Eu²⁺ ions. The excitation spectra of the phosphors have a band centred at 329 nm. It was also characterized by XRD, FT–IR for confirmation of phase purity, and FT–IR analysis indicated the vibrations of metal–oxygen (M–O) groups. SEM shows the morphology of the phosphor at the submicron scale. The results indicate that Ba₃Al₂O₅Cl₂:Eu²⁺ phosphor may be applicable for solid‐state lighting purposes. Copyright © 2012 John Wiley & Sons, Ltd.     

Luminescence investigation of novel MgPbAl10O17:Tb3+ green‐emitting phosphor for solid‐state lighting

In this work, we studied the luminescence properties of Tb³⁺‐doped MgPbAl₁₀O₁₇ green phosphor. To understand the excitation mechanism and corresponding emission of the prepared phosphor, its structural, morphological and photoluminescence properties were investigated. In general, for green emission, Tb³ is used as an activator and the obtained excitation and emission spectra indicated that this phosphor can be effectively excited by a wavelength of 380 nm, and exhibits bright green emission centered at 545 nm corresponding to the f → f transition of trivalent terbium ions. The chromaticity coordinates were (C_x = 0.263, C_y = 0.723). The impact of Tb³⁺ concentration on the relative emission intensity was investigated, and the best doping concentration was found to be 2 mol%. This study suggests that Tb³⁺‐doped MgPbAl₁₀O₁₇ phosphor is a strong candidate for a green component in phosphor‐converted white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Dy3+‐activated NaM4 (VO4)3 (M = Ca,Ba, Sr) phosphor for near‐UV solid‐state lighting

We report the photoluminescence characterization of Dy³⁺‐activated NaM₄(VO₄)₃ (M = Ca, Ba, Sr) phosphors prepared by a solid‐state method. The synthesis was confirmed by X‐ray diffraction (XRD) characterization and photoluminescence (PL) emission results showed sharp blue and yellow bands for NaM₄(VO₄)₃ (M = Ca, Ba, Sr):Dy³⁺ phosphors at the excitation wavelength of 323 nm, which is near‐UV excitation. Thus, these phosphors could be applicable for near‐UV excited solid‐state lighting devices. Copyright © 2011 John Wiley & Sons, Ltd.     

Luminescence study of Eu3+doped Li6Y(BO3)3 phosphor for solid‐state lighting

In this study, Li₆Y_1–xEu_x(BO₃)₃ phosphor was successfully synthesized using a modified solid‐state diffusion method. The Eu³⁺ ion concentration was varied at 0.05, 0.1, 0.2, 0.5 and 1 mol%. The phosphor was characterized for phase purity, morphology, luminescent properties and molecular transmission at room temperature. The XRD pattern suggests a result closely matching the standard JCPDS file (#80‐0843). The emission and excitation spectra were followed to discover the luminescence traits. The excitation spectra indicate that the current phosphor can be efficiently excited at 395 nm and at 466 nm (blue light) to give emission at 595 and 614 nm due to the ⁵D₀ → ⁷F_j transition of Eu³⁺ ions. Concentration quenching was observed at 0.5 mol% Eu³⁺ in the Li₆Y_1–xEu_x(BO₃)₃ host lattice. Strong red emission with CIE chromaticity coordinates of phosphor is x = 0.63 and y = 0.36 achieved with dominant red emission at 614 nm the ⁵D₀ → ⁷ F₂ electric dipole transition of Eu³⁺ ions. The novel Li₆Y_1–xEu_x(BO₃)₃ phosphor may be a suitable red‐emitting component for solid‐state lighting using double‐excited wavelengths, i.e. near‐UV at 395 nm and blue light at 466 nm. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence properties of green‐emitting Ca2MgSi2O7:Eu2+ phosphor by a solid‐state reaction method

A europium (Eu)‐doped di‐calcium magnesium di‐silicate phosphor, Ca₂MgSi₂O₇:Eu²⁺, was prepared using a solid‐state reaction method. The phase structure, particle size, surface morphology, elemental analysis, different stretching mode and luminescence properties were analyzed by X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM) with energy dispersive X‐ray spectroscopy (EDX), Fourier transform infrared (FTIR) spectroscopy, photoluminescence (PL) and mechanoluminescence (ML). The phase structure of Ca₂MgSi₂O₇:Eu²⁺ was an akermanite‐type structure, which belongs to the tetragonal crystallography with space group P4?2₁m; this structure is a member of the melilite group and forms a layered compound. The surface of the prepared phosphor was not found to be uniform and particle distribution was in the nanometer range. EDX and FTIR confirm the components of Eu²⁺‐doped Ca₂MgSi₂O₇ phosphor. Under UV excitation, the main emission peak appeared at 530 nm, belonging to the broad emission ascribed to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The ML intensity of the prepared phosphor increased linearly with increasing impact velocity. A CIE color chromaticity diagram and ML spectrum confirmed that the prepared Ca₂MgSi₂O₇:Eu²⁺ phosphor would emit green color and the ML spectrum was similar to that of PL, which indicated that ML is emitted from the same center of Eu²⁺ ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel optical properties of Ca12Al10.6Si3.4O32Cl5.4:Ce3+,Li+ phosphor for solid‐state lighting

This article reports a novel blue emission in a series of Ca₁₂Al_10.6Si_3.4O₃₂Cl_5.4:Ce³⁺ phosphor under excitation in the near‐UV wavelength range. This phosphor was prepared using the combustion method. Here, the Ce³⁺ emission band is observed over a broad range of 380–550 nm, under 365 nm excitation, and is due to 5d–4f transition. The effect of a Li⁺ charge compensator on the emission properties of the phosphor was also investigated for the first time. X‐Ray diffraction confirmed the phase purity of the synthesized phosphor. The surface morphology and elemental composition of the phosphor were studied using scanning electron microscopy and energy‐dispersive X‐ray spectroscopy. Copyright © 2016 John Wiley & Sons, Ltd.     

Combustion synthesis of blue‐emitting submicron CaAl4O7:Eu2+, Dy3+ persistence phosphor

Long persistence phosphor CaAl₄O₇: Eu²⁺, Dy³⁺ were prepared by a combustion method. The phosphors were characterized by means of X‐ray diffraction (XRD), scanning electron microscopy (SEM), decay time measurement techniques and photoluminescence spectra (PL). The CaAl₄O₇: Eu²⁺, Dy³⁺ phosphor showed a broad blue emission, peaking at 445 nm when excited at 341 nm. Such a blue emission can be attributed to the intrinsic 4f → 5d transitions of Eu²⁺ in the host lattices. The lifetime decay curve of the Dy³⁺ co‐doped CaAl₄O₇: Eu²⁺ phosphor contains a fast decay component and another slow decay one. Surface morphology also has been studied by SEM. The calculated CIE colour chromaticity coordinates was (0.227, 043). We have also discussed a possible long‐persistent mechanism of CaAl₄O₇:Eu²⁺, Dy³⁺ phosphor. All the results indicate that this phosphor has promising potential for practical applications in the field of long‐lasting phosphors for the purposes of sign boards and defence. Copyright © 2011 John Wiley & Sons, Ltd.     

Photoluminescence properties of Ca2Al2O5:RE3+ (RE = Eu,Dy and Tb) phosphors for solid state lighting

Ca₂Al₂O₅:Eu³⁺, Ca₂Al₂O₅:Dy³⁺ and Ca₂Al₂O₅:Tb³⁺ phosphors were synthesized using a combustion synthesis method. The prepared phosphors were characterized by X‐ray powder diffraction for phase purity, by scanning electron microscopy for morphology, and by photoluminescence for emission and excitation measurements. The Ca₂Al₂O₅:Eu³⁺ phosphors could be efficiently excited at 396 nm and showed red emission at 594 nm and 616 nm due to ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂ transitions. Dy³⁺‐doped phosphors showed blue emission at 482 nm and yellow emission at 573 nm. Ca₂Al₂O₅:Tb³⁺ phosphors showed emission at 545 nm when excited at 352 nm. Concentration quenching occurred in both Eu³⁺ and Dy³⁺phosphors at 0.5 mol%. Photoluminescence results suggested that the aluminate‐based phosphor could be a potential candidate for application in environmentally friendly based lighting technologies.     

Synthesis and photoluminescence properties of Eu3+‐activated Ba2Mg(PO4)2 phosphor

In this paper, we have reported the photoluminescence (PL) properties of the Ba₂Mg(PO₄)₂:Eu³⁺ phosphor synthesized using a wet chemical method. The preliminary scanning electron microscopy (SEM) investigation of the sample revealed irregular surface morphology with particle sizes in the 10–50 μm range. The strongest PL excitation peak was observed at 396 nm. The emission spectra indicated that this phosphor can be effectively excited by the 396 nm wavelength. Upon 396 nm excitation, the emission spectrum showed characteristics peaks located at 592 nm and 615 nm. These intense orange‐red emission peaks were obtained due to f→f transitions of Eu³⁺ ions. The emission peak at 592 nm is referred to as the magnetic dipole ⁵D₀→⁷F₁ transition and the emission peak at 615 nm corresponded to the electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺. The Commission Internationale de l’Eclairage (CIE) coordinates of the Ba₂Mg(PO₄)₂:Eu³⁺ phosphor were found to be (0.586, 0.412) for wavelength 592 nm and (0.680, 0.319) for wavelength 615 nm situated at the edge of the CIE diagram, indicating high colour purity of phosphors. Due to the high emission intensity and a good excitation profile, Eu³⁺‐doped Ba₂Mg(PO₄)₂ phosphor may be a promising orange‐red phosphor candidate for solid‐state lighting applications.     

An efficient orange–red‐emitting LiNa3P2O7:Sm3+ pyrophosphate: Structural and optical analysis for solid‐state lighting

A trivalent rare‐earth ion (Sm³⁺)‐doped LiNa₃P₂O₇ (LNPO) phosphor was synthesized using a conventional high‐temperature solid‐state reaction route. A predominant orthorhombic phase of LNPO was observed in all X‐ray diffraction patterns. The surface states of the LNPO:Sm phosphor were confirmed by X‐ray photoelectron spectroscopy. Under 401 nm excitation, the Sm‐doped LNPO phosphors showed sharp emission peaks at 563, 600 and 647 nm that are related to the f–f transition of Sm³⁺ ions. The optimum concentration of Sm³⁺ (9 mol%) produced Commission Internationale de l'Eclairage chromaticity coordinates, color rendering index and correlated color temperature of (0.564, 0.434), 42 and 1843 K, respectively.     

Photoluminescence properties of LiBaPO4:M3+ phosphor for near‐UV light‐emitting diode (M = Eu and Dy)

A novel phosphor LiBaPO₄ doped with rare earths Eu and Dy prepared by high temperature solid‐state reaction method is reported. The phosphors were characterized by X‐ray powder diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL). The emission and excitation spectra of these materials were measured at room temperature with a spectrofluorophotometer. The excitation spectra of LiBaPO₄:Eu³⁺ phosphor can be efficiently excited by 394 nm, which is matched well with the emission wavelength of near‐UV light‐emitting diode (LED) chip. PL properties of Eu³⁺‐doped LiBaPO₄ exhibited the characteristic red emission coming from ⁵D₀ → ⁷ F₁ (593 nm) and ⁵D₀ → ⁷ F₂ (617 nm) electronic transitions with color co‐ordinations of (0.680, 0.315). The results demonstrated that LiBaPO₄:Eu³⁺ is a potential red‐emitting phosphor for near‐UV LEDs. Emission spectra of LiBaPO₄:Dy³⁺ phosphors showed efficient blue (481 nm) and yellow (574 nm) bands, which originated from ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transitions of the Dy³⁺ ion, respectively. The 574 nm line is more intense than the 481 nm lines, which indicates that the site Dy³⁺ is located with low symmetry. This article summarizes fundamentals and possible applications of optically useful inorganic phosphates with visible photoluminescence of Eu³⁺ and Dy³⁺ ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation of balanced trichromatic white phosphors for solid‐state white lighting

High quality white light‐emitting diodes (LEDs) employ multi‐component phosphor mixtures to generate light of a high color rendering index (CRI). The number of distinct components in a typical phosphor mix usually ranges from two to four. Here we describe a systematic experimental technique for starting with phosphors of known chromatic properties and arriving at their respective proportions for creating a blended phosphor to produce light of the desired chromaticity. This method is applicable to both LED pumped and laser diode (LD) pumped white light sources. In this approach, the radiometric power in the down‐converted luminescence of each phosphor is determined and that information is used to estimate the CIE chromaticity coordinate of light generated from the mixed phosphor. A suitable method for mixing multi‐component phosphors is also described. This paper also examines the effect of light scattering particles in phosphors and their use for altering the spectral characteristics of LD‐ and LED‐generated light. This is the only approach available for making high efficiency phosphor‐converted single‐color LEDs that emit light of wide spectral width.     

Structural characterization and optical properties of Ca2MgSi2O7:Eu2+,Dy3+ phosphor by solid‐state reaction method

Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor was prepared by the solid‐state reaction method under a weak reducing atmosphere. The obtained phosphor was characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray spectroscopy (EDX) and Fourier transform infrared (FT‐IR) techniques. The phase structure of the Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor was akermanite type, which is a member of the melilite group. The surface morphology of the sintered phosphor was not uniform and phosphors aggregated tightly. EDX and FT‐IR spectra confirm the elements present in the Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor. Under UV excitation, a broadband emission spectrum was found. The emission spectra observed in the green region centered at 535 nm, which is due to the 4f–5d transition. The mechanoluminescence (ML) intensity of the prepared phosphor increased linearly with increases in the mechanical load. The ML spectra were similar to the photoluminescence (PL), which indicates that ML is emitted from the same emitting center of Eu²⁺ ions as PL. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and luminescence properties of blue‐emitting phosphor Ca12Al14O32F2:Eu2+ for white light‐emitting diode

A blue‐emitting phosphor Ca₁₂Al₁₄O₃₂F₂:Eu²⁺ was synthesized using a high‐temperature solid‐state reaction under a reductive atmosphere. The X‐ray diffraction measurements indicate that a pure phase Ca₁₂Al₁₄O₃₂F₂:Eu²⁺ can be obtained for low doping concentration of Eu²⁺. The phosphor has a strong absorption in the range 270–420 nm with a maximum at ~340 nm and blue emission in the range 400–500 nm with chromatic coordination of (0.152, 0.045). The optimal doping concentration is ~0.24. In addition, the luminescence properties of the as‐synthesized phosphor were evaluated by comparison with those of Ca₁₂Al₁₄O₃₂Cl₂:Eu²⁺ and the commercially available phosphor BaMgAl₁₀O₁₇:Eu²⁺. The emission intensity of Ca₁₂Al₁₄O₃₂F₂:Eu²⁺ was ~72% that of BaMgAl₁₀O₁₇:Eu²⁺ under excitation at λ = 375 nm. The results indicate that Ca₁₂Al₁₄O₃₂F₂:Eu²⁺ has potential application as a near‐UV‐convertible blue phosphor for white light‐emitting diodes.     

Studies on a novel SrZr2CaLa2O8:Eu3+ phosphor for lighting applications emitting direct white light

Direct white light emitting phosphors play a significant role in the display industry due to their ability to improve the quality, efficiency, and versatility of lighting sources used in most of the displays. The currently investigated phosphor SrZr₂CaLa₂O₈:Eu³⁺ was prepared by a conventional solid-state reaction method. It has been observed that the stoichiometric ratio of all precursors plays an important role in determining the characteristics of the final phosphor. From X-ray diffraction (XRD) analysis, the phosphor was observed to have a hexagonal phase and a crystal size of ~28 nm. Scanning electron microscopy (SEM) observations revealed a cluster of rod-like structures with an average diameter of ~0.2 μm. The excitation peak maximum observed at 280 nm is due to charge transfer between Eu³⁺-O²⁻ ions. The energy transitions ⁷F₀ → ⁵L₆ and ⁷F₀ → ⁵D₂ are responsible for the appearance of other excitation peaks at ultraviolet (UV) (395 nm), blue (~467 nm), green (~540 nm), orange (~590 nm), and red (~627 nm) attributed to ⁵D₀ → ⁷F_J (J = 0–4) transitions of europium ion (Eu³⁺). The Commercial International de I'Eclairage (CIE) chromaticity coordinates were estimated to be (0.37, 0.0.33) and (0.67, 0.33) for the emissions corresponding to 395 and 590 nm, respectively. The characteristic emissions of Eu³⁺ ions allow this novel phosphor to be used to generate direct white light in light-emitting diodes (LEDs), which is otherwise difficult to achieve in single-component systems.     

Characterization and luminescence properties of CaMgSi2O6:Eu2+ blue phosphor

A blue CaMgSi₂O₆:Eu²⁺ phosphor was prepared by the solid‐state reaction method and the phosphor characterized in terms of crystal structure, particle size, photoluminescence (PL), thermoluminescence (TL) and mechanoluminescence (ML) properties using X‐ray diffraction (XRD), transmission electron microscopy (TEM), PL spectroscopy, TLD reader and ML impact technique. The XRD result shows that phosphor is formed in a single phase and has a monoclinic structure with the space group C2/c. Furthermore, the PL excitation spectra of Eu²⁺‐doped CaMgSi₂O₆ phosphor showed a strong band peak at 356 nm and the PL emission spectrum has a peak at 450 nm. The depths and frequency factors of trap centers were calculated using the TL glow curve by deconvolution method in which the trap depths were found to be 0.48 and 0.61 eV. The formation of CaMgSi₂O₆:Eu²⁺ phosphor was confirmed by Fourier transform infrared spectroscopy. The ML intensity increased linearly with the impact velocity of the piston used to deform the phosphor. It was shown that the local piezoelectricity‐induced electron bombardment model is responsible for the ML emission. Finally, the optical properties of CaMgSi₂O₆:Eu²⁺ phosphors are discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence of the near‐ultraviolet blue‐emitting Ba9Al2Si6O24:Ce3+ phosphor

A near‐ultraviolet (NUV) blue‐emitting phosphor Ba₉Al₂Si₆O₂₄:Ce³⁺ (BAS:Ce³⁺) was synthesized using a high‐temperature solid‐state reaction. BAS:Ce³⁺ had an excitation band peak at about 328 nm and showed a blue emission band. The NUV‐blue emission band had a peak at about 386 nm with a band width of about 60 nm, attributed to the 5d–4f transition of Ce³⁺. Fluorescent decay showed an exponential model with a lifetime of 27.2 nsec. At 150°C, the luminescence intensity decreased to 68.7% compared with the intensity at room temperature.     

Sr2ZnWO6:Eu3+,Bi3+,Li+: a potential white‐emitting phosphor for near‐ultraviolet white light‐emitting diodes

A series of Sr₂ZnWO₆ phosphors co‐doped with Eu³⁺, Bi³⁺ and Li⁺ were prepared using the Pechini method. The samples were tested using X‐ray diffraction and luminescence spectroscopy. The results show that the samples can be effectively excited by near‐ultraviolet (UV) and UV light. The introduction of Bi³⁺ and Li⁺ significantly enhances the fluorescence emission of Sr₂ZnWO₆:Eu³⁺ and changes the light emitted by the phosphors from bluish‐green to white. When excited at 371 nm, Sr_2–x–zZn_1–yWO₆:xEu³⁺,yBi³⁺,zLi⁺ (x = 0.05, y = 0.05, z = 0.05, 0.1 and 0.15) samples emit high‐performance white light. Intense red–orange emission is also observed when excited by UV light. The obtained phosphor is a potential white‐emitting phosphor that could meet the needs of excitation sources with near‐UV chips. In addition, this phosphor might have promising application as a red–orange emitting phosphor for white light‐emitting diodes based on UV light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Studies on the luminescence properties of cerium co‐doping on Ca2MgSi2O7:Eu2+ phosphor by solid‐state reaction method

Ca₂MgSi₂O₇:Ce³⁺, Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors were prepared using the solid‐state reaction method. The crystal structures of the sintered phosphors were of melilite type, which has a tetragonal crystallography. The chemical compositions of the sintered phosphors was confirmed by energy dispersive X‐ray spectroscopy. The different thermoluminescence kinetic parameters [activation energy (E), frequency factor (s) and order of the kinetics (b)] of these phosphors were evaluated and compared using the peak shape method. Under ultraviolet excitation, the emission spectra of both Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors were composed of a broad emission band peaking at 530 nm. When the Ca₂MgSi₂O₇:Eu²⁺ phosphor is co‐doped with Ce³⁺ ions, photoluminescence, afterglow and mechanoluminescence intensity was strongly enhanced. Ca₂MgSi₂O₇:Eu²⁺ showed some afterglow with a short persist time. On incorporation of Ce³⁺, efficient energy transfer from Ce³⁺ to Eu²⁺ was found and the emission intensity of Eu²⁺ was enhanced. The mechanoluminescence intensities of Ca₂MgSi₂O₇:Ce³⁺, Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors increased proportionally increased with the increase in impact velocity, which suggests that these phosphors can be used as sensors to detect stress in an object.