Peptide-derivatized albumins that inhibit fibrin polymerization

Synthetic peptides patterned on sequences that appear during thrombin proteolysis of fibrinogen are known to influence fibrin formation in very different ways. A-Knob sequences (GPR-) inhibit polymerization, but B-knob sequences (GHR-) can actually enhance the process. We now report that when such peptides are attached to albumin carriers, both knob conjugates inhibit fibrin formation. In contrast, the 2-aminoethylthiol-albumin conjugate control enhances the polymerization to the same degree as albumin. The peptide AHRPam, which is known to bind exclusively to the βC holes of fibrinogen/fibrin, nullifies the inhibitory effects of the GHRPYGGGCam-albumin conjugate on fibrin polymerization, indicating that the inhibition was exclusively due to interactions with βC holes. AHRPam was much less effective in countering inhibition by the GPRPGGGGCam-albumin conjugate, suggesting that the observed effects with this conjugate involve mainly the γC holes of fibrin/fibrinogen. This study demonstrates that peptides modeled on fibrin polymerization knobs tethered to albumin retain their capacity to interact with fibrinogen/fibrin and may prove useful as inhibitors of clotting in vivo.     

Interaction between complementary polymerization sites in the structural D and E domains of human fibrin.

Plasmic degradation products of human fibrin, fragments DD, D, and E, bind to fibrin. It has been inferred from this observation that the binding occurs by attraction of complementary sites located in the NH2- and COOH-terminal domains of the fibrin molecule. The interaction between fragments D1 and E1 has been investigated in this work since it represents the first step in the process of fibrin clot formation. Fragment D1, that was initially as active as fragment DD, lost most of its anticoagulant activity after purification by cation-exchange chromatography. The lability of fragment D1 function explained the previous unsuccessful attempts to form a complex between fragments D1 and E1. The loss of fragment D1 anticoagulant activity was not associated with the cleavage of the gamma 63-85 chain segment, since fragments D1A and D1 identically inhibited the fibrin monomer polymerization rate. In order to demonstrate the formation of a complex between fragments D1 and E1, three lines of experiments were advanced. First, the anticoagulant activity of fragment D1 was neutralized by fragment E1 in a dose-dependent manner, demonstrating that the association between these fragments involved polymerization sites. Second, two products, D1.E1 and D1.E1.D1, were stabilized in a reaction with bifunctional cross-linking reagents, proving the formation of D.E complexes in aqueous solution. Third, immobilized fragment D1 bound fragments E1 and E2, but not fragment E3, showing that fragments E1 and E2 attached via a polymerization site to the complementary one in fragment D1, since this association was disrupted by fibrin polymerization inhibitory peptide GPRP. These results provided direct evidence for specific binding between the structural D and E domains of fibrin mediated through complementary polymerization sites. Thus, the initial formation of fibrin clot fibers appears to be driven by specific association of these sites.     

Binding of synthetic B knobs to fibrinogen changes the character of fibrin and inhibits its ability to activate tissue plasminogen activator and its destruction by plasmin

Synthetic peptides corresponding to the amino-terminal sequence of the beta chain of fibrin increase the turbidity of fibrin clots, whether they are generated by the direct interaction of thrombin and fibrinogen or by the reassociation of fibrin monomers. The turbidity of batroxobin-induced clots, which are characteristically "fine," is increased even more dramatically. Pentapeptides are more effective than tetrapeptides. Surprisingly, the same peptides also delay fibrinolysis, whether activated by exogenously added plasmin or from the fibrin-enhanced stimulation of tissue plasminogen activator (tPA) activation of plasminogen. The peptides have only a very slight effect on the plasmic hydrolysis of a chromogenic peptide, either by the direct addition of plasmin or by plasmin generated from plasminogen by tPA. The synthetic peptides mimicking the B knobs appear to exert their action in two ways. First, they render fibrin less vulnerable to attack by plasmin. Second, they delay the fibrin activation of tPA. The latter is attributed to their ability to prevent the binding of the authentic B knob, which itself is located at the end of a flexible 50-residue tether and which needs time to find its elusive "hole". We propose that, when after a while the tethered knob does become inserted, it locks the betaC domain in a conformation that allows access to tPA-plasminogen-binding sites, whereas the untethered synthetic knobs restrict the fibrin to a conformation in which those sites remain inaccessible. Thus, although the interaction involving the A knob and gammaC hole is the basis for the polymerization of fibrin, the comparable but delayed interaction involving the B knob and the betaC hole is ultimately directed at preparing the clot for its eventual destruction.     

Polymerization site in the beta chain of fibrin: mapping of the B beta 1-55 sequence

The formation of a fibrin clot occurs through binding of putative complementary sites, called fibrin polymerization sites, located in the NH2- and COOH-terminal domains of fibrin monomer molecules. In this study, we have investigated the structure of the NH2-terminal fibrin polymerization site by using fibrinogen-derived peptides and fragments. Fibrinogen was digested with Crotalus atrox protease III, to two major molecular species: a Mr 325,000 derivative (Fg325) and a peptide of Mr 5000. The peptide and its thrombin-cleavage product were purified by ion-exchange and reverse-phase HPLC; the authenticity of the B beta 1-42 and beta 15-42 peptides, respectively, was confirmed by amino acid sequencing. Since Fg325 had decreased thrombin coagulability, we addressed the question of whether the peptide B beta 1-42 contained a fibrin polymerization site. In order to identify and map the site, the peptides B beta 1-42 and beta 15-42 were tested for their ability to inhibit fibrin monomer polymerization. In addition the following peptides prepared by chemical synthesis were also tested: beta 15-18, beta 15-26, beta 24-42, beta 40-54, beta 50-55, and alpha 17-19-Pro. While B beta 1-42 had no inhibitory activity, the peptide devoid of fibrinopeptide B, beta 15-42, was a strong inhibitor. The peptides beta 15-18, beta 15-26, and beta 15-42 decreased the rate of fibrin polymerization by 50% at a molar excess of the peptide to fibrin monomer of 500, 430, and 50, respectively. The peptides beta 24-42, beta 40-54, and beta 50-55 were inactive.(ABSTRACT TRUNCATED AT 250 WORDS)     

Purification and antithrombotic activity of wulfase,a fibrinolytic enzyme from the fruit bodies of the edible and medicinal mushroom <Emphasis Type="Italic">Sparassis crispa</Emphasis> Wulf. ex. Fr.

A fibrinolytic protease, wulfase, exhibiting antithrombotic potency was purified from the fruit bodies of Sparassis crispa Wulf. ex. Fr. Wulfase showed a single band of approximately 90 kDa by SDS-PAGE and fibrin zymography. The fibrinolytic activity of wulfase determined by fibrin plate assay revealed that it could directly degrade fibrin clot. The enzyme could inhibit activities of factor Xa and thrombin. Turbidity and electron-microscopy analysis using fluorescent conjugate demonstrated that wulfase also inhibited fibrin polymer formation. The anticoagulant effect of the enzyme was further confirmed in human plasma. These results suggest that wulfase may be useful for reducing or preventing thrombotic challenge.     

The interference of plasmic degradation products of human crosslinked fibrin with clot formation

The role of plasmic degradation products of human crosslinked fibrin on polymerization of fibrin monomer and clot formation was studied. Both reactions were inhibited by Fragment DD, which formed a complex with fibrin monomer in a molar ratio 1 : 1. The rate of polymerization was slightly increased by Fragment E but it was not affected by (DD)E complex and Fragment A. Approximately the same amount of fibrin was formed in the presence and absence of Fragments A, E and the complex. It was concluded that of the degradation products of crosslinked fibrin, only Fragment DD is a potent anticoagulant at physiologic pH. The (DD)E complex is inert and Fragments A and E have only marginal effects.     

The interference of plasmic degradation products of human crosslinked fibrin with clot formation.

The role of plasmic degradation products of human crosslinked fibrin on polymerization of fibrin monomer and clot formation was studied. Both reactions were inhibited by Fragment DD, which formed a complex with fibrin monomer in a molar ratio 1 : 1. The rate of polymerization was slightly increased by Fragment E but it was not affected by (DD)E complex and Fragment A. Approximately the same amount of fibrin was formed in the presence and absence of Fragments A, E and the complex. It was concluded that of the degradation products of crosslinked fibrin, only Fragment DD is a potent anticoagulant at physiologic pH. The (DD)E complex is inert and Fragments A and E have only marginal effects.     

Three-dimensional structural studies on fragments of fibrinogen and fibrin

Fibrinogen is a 340 kDa glycoprotein found in the blood plasma of all vertebrates. It is transformed into a fibrin clot by the action of thrombin. Recent X-ray structures of core fragments of both fibrinogen and fibrin have revealed many details about this polymerization event. These include structures of a 30 kDa recombinant γC domain, an 86 kDa fragment D from human fibrinogen and a cross-linked double-D fragment from fibrin.     

Coarse-grained molecular dynamics simulations of fibrin polymerization: effects of thrombin concentration on fibrin clot structure

Studies suggest that patients with deep vein thrombosis and diabetes often have hypercoagulable blood plasma, leading to a higher risk of thromboembolism formation through the rupture of blood clots, which may lead to stroke and death. Despite many advances in the field of blood clot formation and thrombosis, the influence of mechanical properties of fibrin in the formation of thromboembolisms in platelet-poor plasma is poorly understood. In this paper, we combine the concepts of reactive molecular dynamics and coarse-grained molecular modeling to predict the complex network formation of fibrin clots and the branching of fibrin monomers. The 340-kDa fibrinogen molecule was converted into a coarse-grained molecule with nine beads, and using our customized reactive potentials, we simulated the formation and polymerization process of a fibrin clot. The results show that higher concentrations of thrombin result in higher branch-point formation in the fibrin clot structure. Our results also highlight many interesting properties, such as the formation of thicker or thinner fibers depending on the thrombin concentration. To the best of our knowledge, this is the first successful molecular polymerization study of fibrin clots to focus on thrombin concentration.     

Localization of a fibrin polymerization site

The formation of a fibrin clot is initiated after the proteolytic cleavage of fibrinogen by thrombin. The enzyme removes fibrinopeptides A and B and generates fibrin monomer which spontaneously polymerizes. Polymerization appears to occur though the interaction of complementary binding sites on the NH2-terminal and COOH-terminal (Fragment D) regions of the molecule. A peptide has been isolated from the gamma chain remnant of fibrinogen Fragment D1 which has the ability to bind to the NH2-terminal region of fibrinogen as well as to inhibit fibrin monomer polymerization. The peptide reduces the maximum rate and extent of the polymerization of thrombin or batroxobin fibrin monomer and increases the lag time. The D1 peptide does not interact with disulfide knot, fibrinogen, or Fragment D1, but it binds to thrombin-treated disulfide knot with a Kd of 1.45 X 10(-6) M at approximately two binding sites per molecule of disulfide knot. Fibrin monomer formed either by thrombin or batroxobin binds approximately two molecules of D1 peptide per molecule of fibrin monomer, indicating that the complementary site is revealed by the loss of fibrinopeptide A. The NH2-terminal sequence (Thr-Arg-Trp) and COOH-terminal sequence (Ala-Gly-Asp-Val) of the D1 peptide were determined. Therefore the gamma 373-410 region of fibrinogen contains a polymerization site which is complementary to the thrombin-activated site on the NH2-terminal region of fibrinogen.     

Immobilization of soluble fibrin on factor XIIIa-coated polystyrene beads mediated by N-terminal fibronectin fragments. II. Demonstration of covalent adducts of fibrin peptide chains and fibronectin fragments.

Previous experiments had shown that the free N-terminal fibronectin 30-kDa-domain mediates binding of soluble 125I-fibrin to transamidase-coated polystyrene beads (H?rmann et al., Biol. Chem. Hoppe-Seyler 368, 669-674, 1987). Now, the formation of covalent adducts of the N-terminal fragment with fibrin peptide chains is demonstrated. Binding of soluble 125I-fibrin was performed in presence of N-terminal fibronectin 30-kDa or 70-kDa fragments. The material adsorbed was removed from the beads under reducing conditions and analysed by dodecylsulfate gel electrophoresis followed by autoradiography. The 30-kDa fragment gave rise to bands of 80 kDa and 180-200 kDa which were lacking in the products of the 70-kDa compound. Instead, they showed bands at 120 kDa and ca. 280 kDa. Evidently, those bands represented covalent adducts of fibrin peptide chains or their dimers with the 30-kDa or the 70-kDa fragment, respectively. In addition, dimeric gamma-chains and alpha-chain polymers of fibrin were present indicating partial polymerization of bead-attached fibrin.     

The role of calcium ions in fibrin polymerization

The article reviews the literature and authors' own data on the role of Ca ions in blood coagulation, namely, in the process of the formation of highly ordered fibrin clot. It has been shown that the main role of Ca2+ is the timely formation and stabilization of fibrin polymerization sites at all successive stages of the fibrin polymerization process.     

Effect of low-molecular peptides on the transformation of fibrinogen into fibrin

The influence of synthetic peptides on fibrinogen transformation to fibrin under the action of thrombin and fibrin-monomer polymerization was investigated. Peptides Gly-Pro-Arg-Pro; Gly-Pro-Arg-Pro-Lys; Gly-Pro-Arg-Pro-Lys-Boc; Gly-Pro-Arg-Pro-Arg are specific inhibitors of fibrin formation. These peptides interfere with the hydrolysing effect of thrombin due to binding to the central domain of fibrinogen. The interaction of peptides with peripheral D-domains of fibrin-monomer may account for polymerization inhibition. The latter peptide has the largest anticoagulation activity. It is likely that arginine in the fifth position stabilizes the structure of the peptides, with the additional epsilon NH2-group activating its interaction with protein.     

Gel formation by fibrin oligomers without addition of monomers

Soluble fibrin oligomers were formed by reacting fibrinogen with thrombin under fine clotting conditions where the action of thrombin is the rate-determining step for polymerization, and by inhibiting the reaction shortly before gelation. Oligomeric fibrin was separated from unreacted fibrinogen and small oligomers by gel permeation chromatography. Electron microscopy revealed that the largest soluble fibrin oligomers resemble the protofibrils present in fine clots, but are somewhat shorter and entirely lack the twisted, trifunctional junctions that contribute to the elastic properties of fine clots. When thrombin was added to the soluble fibrin oligomers, polymerization resumed and clots were formed at a more rapid rate than from fibrinogen at the same concentration and resulted in a less-opaque clot under coarse clotting conditions. The results confirm a prediction of a theory for the polymerization of fibrin and provide additional evidence that the final state of a coarse fibrin clot depends on the mobility of protofibrils during its formation.     

Soluble fibrin consists of fibrin oligomers of heterogeneous distribution

Soluble fibrin is observed in patients with intravascular coagulation and represents an intermediary product of conversion of fibrin monomers into a fibrin clot whereby the presence of fibrinogen may suppress fibrin clot formation. The interactions between fibrin and fibrinogen and the occurrence of fibrin oligomers in soluble fibrin were studied by sucrose density ultracentrifugation. Different concentrations of soluble fibrin, prepared by mixing 125I-fibrin (24 nM - 1.5 microM) with a constant concentration of 131I-fibrinogen (6 microM) were analyzed at 37 degrees C in stable linear sucrose density gradients containing a uniform concentration of unlabelled fibrinogen (6 microM) and calcium ions in order to mimic the physiological situation. At any fibrin concentration, 125I-fibrin sedimented faster than 131I-fibrinogen through 5-30% (w/v) sucrose gradients. Sedimentation rates of fibrin increased from 9 S to 23 S depending on the initial fibrin concentration. The relative amount of residual fibrin monomer not incorporated into oligomers was calculated from the sedimentation profiles. At any fibrin concentration, the portion of free monomer was always more than twofold higher for batroxobin-generated (desAA-) fibrin than for thrombin-generated (desAABB-) fibrin. Apparent association constants for desAABB-fibrin were 3-10 times higher than those for desAA-fibrin indicating a stronger interaction between monomers of the former type of fibrin. In the presence of excess fibrinogen the predominant species in soluble desAA-fibrin were monomers and dimers, whereas dimers, trimers and higher-molecular-mass oligomers were present in soluble desAABB-fibrin. Strong interactions between both types of fibrin were demonstrated from their cosedimentation, whereby the size of these copolymers were shown to be governed by the oligomer size of the desAABB-fibrin type. These results provide evidence for the occurrence of differently sized oligomers of fibrin in soluble fibrin and for the concept of a cooperative polymerization process between both types of fibrin devoid of any stable complexes between fibrin and fibrinogen.     

Modification of antimicrobial peptide with low molar mass poly(ethylene glycol)

PEGylation of peptide drugs prolongs their circulating lifetimes in plasma. However, PEGylation can produce a decrease in the in vitro bioactivity. Longer poly(ethylene glycol) (PEG) chains are favourable for circulating lifetimes but unfavourable for in vitro bioactivities. In order to circumvent the conflicting effects of PEG length, a hydrophobic peptide, using an antimicrobial peptide as a model, was PEGylated with short PEG chains. The PEGylated peptides self-assembled in aqueous solution into micelles with PEG shell and peptide core. In these micelles, the core peptides were protected by the shell, thus reducing proteolytic degradation. Meanwhile, most of the in vitro antimicrobial activities still remained due to the short PEG chain attached. The stabilities of the PEGylated peptides were much higher than that of the unPEGylated peptides in the presence of chymotrypsin and serum. The antimicrobial activities of the PEGylated peptides in the presence of serum, an ex vivo assay, were much higher than that of the unPEGylated peptide.     

Fibrinogen beta-chain tyrosine nitration is a prothrombotic risk factor

Elevated levels of circulating fibrinogen are associated with an increased risk of atherothrombotic diseases although a causative correlation between high levels of fibrinogen and cardiovascular complications has not been established. We hypothesized that a potential mechanism for an increased prothrombotic state is the post-translational modification of fibrinogen by tyrosine nitration. Mass spectrometry identified tyrosine residues 292 and 422 at the carboxyl terminus of the beta-chain as the principal sites of fibrinogen nitration in vivo. Immunoelectron microscopy confirmed the incorporation of nitrated fibrinogen molecules in fibrin fibers. The nitration of fibrinogen in vivo resulted in four distinct functional consequences: increased initial velocity of fibrin clot formation, altered fibrin clot architecture, increased fibrin clot stiffness, and reduced rate of clot lysis. The rate of fibrin clot formation and clot architecture was restored upon depletion of the tyrosine-nitrated fibrinogen molecules. An enhanced response to the knob "B" mimetic peptides Gly-His-Arg-Pro(am) and Ala-His-Arg-Pro(am) suggests that incorporation of nitrated fibrinogen molecules accelerates fibrin lateral aggregation. The data provide a novel biochemical risk factor that could explain epidemiological associations of oxidative stress and inflammation with thrombotic complications.     

Functional and diagnostic significance of A-, Bbeta 1-42 and Bbeta 15-42 peptide fragments of fibrin(ogen)]

A scheme of in vitro formation and hydrolysis of the fibrin clot is suggested. This scheme considers the data concerning a cofactor role of fibrin in activation of polymerization and fibrinolysis. Such parameters of a number of components as concentration of A-, B beta 1-42-and B beta 15-42 peptides and of other fragments of fibrinogen which allow characterizing a state of hyperfibrinolysis, hyperclotting or dynamic equilibrium of these systems are selected in the scheme.     

Interaction of fibrinogen and its derivatives with fibrin

The binding between complementary polymerization sites of fibrin monomers plays an essential role in the formation of the fibrin clot. One set of polymerization sites involved in the interaction of fibrin monomers is believed to pre-exist in fibrinogen, while the complementary set of binding sites is exposed after the cleavage of fibrinopeptides from fibrinogen. The polymerization sites present in fibrinogen and its derivatives mediate their binding to fibrin. Although the binding of fibrinogen and its derivatives to fibrin have been qualitatively studied, there has been no systematic, quantitative investigation of their interaction with forming or preformed clots. In the present study, the binding of fibrinogen and fragments DD, D1, and E1 was measured using a sonicated suspension of plasminogen- and thrombin-free human cross-linked fibrin as a model of a preformed clot. Dissociation constants of 0.056, 0.19, and 2.44 microM, and the number of binding sites corresponding to 0.10, 0.21, and 0.13/fibrin monomer unit of fibrin polymer were found for fibrinogen, fragment DD, and fragment D1, respectively. Fragment E1 did not bind to sonicated noncross-linked or cross-linked fibrin suspensions. However, it was bound to forming fibrin clots as well as to fibrin-Celite, suggesting that the binding sites on fibrin involved in the interaction with fragment E1 may have been altered upon sonication. Affinity chromatography of various fibrinogen derivatives on a fibrin-Celite column showed that only part of the bound fragment DD was displaced by arginine, whereas fragments D1 and E1 were completely eluted under the same conditions. The results indicate that interaction of fibrinogen with the preformed fibrin clots is characterized by affinity in the nanomolar range and that binding between fibrin monomers, in the process of clot formation, could be characterized by even a higher affinity.     

Platelet factor 4 (CXCL4) seals blood clots by altering the structure of fibrin

Platelet factor-4 (PF4/CXCL4) is an orphan chemokine released in large quantities in the vicinity of growing blood clots. Coagulation of plasma supplemented with a matching amount of PF4 results in a translucent jelly-like clot. Saturating amounts of PF4 reduce the porosity of the fibrin network 4.4-fold and decrease the values of the elastic and loss moduli by 31- and 59-fold, respectively. PF4 alters neither the cleavage of fibrinogen by thrombin nor the cross-linking of protofibrils by activated factor XIII but binds to fibrin and dramatically transforms the structure of the ensuing network. Scanning electron microscopy showed that PF4 gives rise to a previously unreported pattern of polymerization where fibrin assembles to form a sealed network. The subunits constituting PF4 form a tetrahedron having at its corners a RPRH motif that mimics (in reverse orientation) the Gly-His-Arg-Pro-amide peptides that co-crystallize with fibrin. Molecular modeling showed that PF4 could be docked to fibrin with remarkable complementarities and absence of steric clashes, allowing the assembly of irregular polymers. Consistent with this hypothesis, as little as 50 microm the QVRPRHIT peptide derived from PF4 affects the polymerization of fibrin.