Structure of the histone tetramer (H3-H4)2: 2. Position of λmax in the tyrosyl fluorescence spectra and tyrosyl accessibility to quenchers

It was shown that the histone tetramer (H3-H4)₂ fluorescence spectra were shifted by about 2 nm towards the long-wave region and had a larger halfwidth than the free tyrosine fluorescence spectra. Denaturation with 8 m urea resulted in a shift towards the short-wave region and a decrease in the halfwidth of the histone tetramer (H3-H4)₂ tyrosine fluorescence spectra. Fluorescence quenching of the histone tetramer (H3-H4)₂ by iodine ions was analysed by the Stern-Volmer equation. It was estimated that at 0.1 m NaCl and 0.3–0.8 m NaCl, 45% and 60% tyrosyl fluorescence, respectively, was quenched by I^? ions. The results obtained suggests that histone tetramer (H3-H4)₂ may have several structural forms distinguished by the amount of ‘exposed’ and ‘buried’ tyrosyls depending upon the conditions of the medium.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

Synthesis and characterisation of adducts of [Pt2(μ-S)2(PPh3)4] with organo-palladium and platinum-hydride substrates

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of palladium(II) complexes containing organometallic ligands (cyclopalladated N-donor ligands, η³-allyl, phenyl) have been explored, leading to the formation of a series of cationic, trinuclear sulfido-bridged aggregates containing {Pt₂PdS₂} cores. [Pt₂(μ-S)₂(PPh₃)₄] also reacts with the platinum(II) hydride complex trans-[PtHCl(PPh₃)₂] giving the adduct [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]⁺. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄PdPh(PPh₃)]PF₆ and [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]PF₆ are reported, and show the expected bis μ₃-sulfido aggregates with three square-planar metal centres.     

The interaction of α2 macroglobulin with trypsin releases a soluble glycopeptide

When human α₂ macroglobulin (α₂M) or its asialo-[³H]galactose derivative reacts with trypsin, a glycopeptide of molecular weight 3500–4000 is released from the α₂M. The glycopeptide was purified on Biogel P-4 columns and its amino acid and carbohydrate composition were determined. The oligosaccharide contains sialic acid, galactose, mannose and GlcNAc in a ratio of 1.0:0.73:3.85:2.85 and is apparently attached to protein in a GlcNAc→asparagine linkage.     

A structural investigation of the heterobimetallic carbocation complex [Cp(CO)2Fe{μ-CH2CH(CH2)3}W(CO)3Cp]BPh4

The reaction of [Cp^∗(CO)₂Fe{μ-CH₂CH(CH₂)₃}W(CO)₃Cp]PF₆ with NaBPh₄ in dry acetone gave [Cp^∗(CO)₂Fe{μ-CH₂CH(CH₂)₃}W(CO)₃Cp]BPh₄. The bond Fe-C_β is shorter than that reported for the shorter chain carbocationic complexes. The data suggest that metallacyclopropane character is on the iron side of the molecule both in the solid state and in solution.     

A versatile entry into aqueous niobium chemistry: isolation and structure of the intermediate Nb4(μ2-O)2(μ2-OC2H5)4Cl4(OC2H5)4(HOC2H5)4

The reduction of ethanolic solutions of niobium pentachloride with zinc, followed by treatment with aqueous acids serves as a versatile entry into the aqueous solution chemistry of niobium. From the zinc-reduced solution, the major intermediate, Nb₄(μ₂-O)₂(μ₂-OC₂H₅)₄Cl₄(OC₂H₅)₄(HOC₂H₅)₄, was isolated and the crystal structure determined by X-ray crystallography. The complex crystallizes in the orthorhombic space group Pccn, with Z=4, a=21.0105(9), b=11.0387(5), c=19.1389(8), V=4438.9(3) ų, M_r=1090.19,R₁=0.0327 and wR₂=0.0876. The structure revealed a centrosymmetric tetrameric Nb(IV) complex, consisting of a pair of edge-sharing bi-octahedral Nb₂(μ₂-OC₂H₅)₄Cl₂(OC₂H₅)₂(HOC₂H₅)₂ units that are joined by two axial oxo ligands. The Nb-Nb distance of 2.7458(3) Å is consistent with a single metal-metal bond.     

Synthesis of some pentanuclear platinum clusters [Pt5(CO)6(L)4]. The X-ray structure of [Pt5(μ-CO)5(CO)(PCy3)4]

[Pt₅(μ-CO)₅(CO)L₄] (L = PPh₃1, PPh₂Bz 2, AsPh₃3, PEt₃4, PCy₃5) have been synthesized by reacting [Pt₃(μ-CO)₃(PR₃)₃] with H₂O₂ (1 and 2), by reduction of cis-[PtCl₂(CO)(PEt₃)] with Zn dust (4), and by the Zn reduction of [Pt₃(μ-CO)₃(PCy₃)₃] in the presence of [PtCl₂(CH₃CN)₂] (5). Complex 5 has not been observed previously and has been characterized by X-ray crystallography. Oxidation of the phosphine ligands with H₂O₂ is a new way to synthesize 1 and 2. The first complete NMR characterization of these complexes has also been achieved, and showed that these pentanuclear cluster complexes exhibit similar stereochemistries in solution and in the solid state. The observed ¹J_Pt-Pt values do not have any correlation with the corresponding bond lengths, again pointing out the irregular behaviour of such parameter in Pt complexes.     

Dynamic properties of the fluxional Rh2H(μ-PPh2)2(PPh3)3 complex

The rhodium dimer [Rh₂H(PPh₂)₂(PPh₃)₃]⁻ was prepared from RhCl(PPh₃)₃ and K₄Sn₉ in the presence of 2,2,2-cryptand in ethylenediamine/toluene solvent mixtures. The [K(2,2,2-crypt)]⁺ salt was isolated and characterized via NMR and X-ray diffraction studies. The solid state structure reveals a binuclear, diphenylphosphido-bridged, 32 electron Rh(I)-Rh(I) complex with edge-shared tetrahedral and square planar Rh centers with overall C_s point symmetry. 1-D and 2-D ¹H, ³¹P, and ³¹P{¹H} NMR experiments were used to characterize the complex.     

Chalcogenide-capped triruthenium clusters: X-ray structures of [Ru3(CO)6(μ3-CO){P(C4H3S)3}(μ-dppm)(μ3-O)] and [(μ-H)2Ru3(CO)6{P(C4H3S)3}(μ-dppm)(μ3-S)]

Treatment of [Ru₃(CO)₉{P(C₄H₃S)₃}(μ-dppm)] (1) [dppm = bis(diphenylphosphino)methane] with molecular oxygen in benzene at 60 °C affords oxo-capped [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-O)] (2), while with elemental sulfur and selenium related chalcogenide-capped clusters [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-E)] (3, E = S; 5, E = Se) and bis(chalcogenide) clusters [Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-E)₂] (4, E = S; 6, E = Se) result. Reaction of 1 with H₂S in refluxing THF affords the previously reported [(μ-H)₂Ru₃(CO)₇(μ-dppm)(μ₃-S)] (7) together with the new sulfido-capped dihydride [(μ-H)₂Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-S)] (8). All new compounds have been characterized by spectroscopic data, and 2 and 8 by single-crystal X-ray diffraction analyses. Oxo-capped 2 consists of a triangular ruthenium framework capped on opposite sides by oxo and carbonyl groups, while 8 consists of a ruthenium triangle by a capping sulfido ligand and two inequivalent bridging hydride ligands.     

Dinuclear platinum complexes with designer thiolate ligands from the monoalkylation of [Pt2(μ-S)2(PPh3)4]

Alkylation reactions of the nucleophilic platinum(II) sulfide complex [Pt₂(μ-S)₂(PPh₃)₄] with functionalised alkylating agents have been investigated as a versatile synthetic route to dinuclear, cationic sulfide-thiolate complexes of the type [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺, extending the range of thiolate complexes that can be prepared using this methodology. A wide range of functional groups can be incorporated, using appropriate alkylating agents, and include ketone, ester, amide, hydrazone, semicarbazone, thiosemicarbazone, oxime, guanidine, urea and thiourea groups.     

Ru2(CO)4(OOCR)2(PPh3)2 sawhorse-type complexes containing μ2-η-carboxylato ligands derived from biologically active acids

The thermal reaction of Ru₃(CO)₁₂ with the biologically active acids acetyl salicylic acid (Aspirin), α-methyl-4-(isobutyl)phenylacetic acid (Ibuprofen) and 3α,7α,12α-trihydroxy-5β-cholanic acid (cholic acid) in refluxing tetrahydrofuran, followed by addition of triphenylphosphine, gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂(PPh₃)₂ (1: R = C₆H₄-2-OCOMe, 2: R = CHMe-C₆H₄-4-Buⁱ, 3: C₂₃H₃₉O₃). The single-crystal structural analysis of 1 and 2 reveals a dinuclear Ru₂(CO)₄ sawhorse structure, the diruthenium backbone being bridged by the carboxylato ligands, while the two phosphine ligands occupy the axial positions at the ruthenium atoms. However, chiral carbon atoms in the carboxylic acid undergo racemisation during the thermal reaction.     

The reactivity of [Pt2(μ-S)2(PPh3)4] towards difunctional chloroacetamide alkylating agents: Formation of cyclized or bridged products

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] towards some bis(chloroacetamide) alkylating agents have been investigated. Reaction with one mole equivalent of the hydrazine-derived compound ClCH₂C(O)NHNHC(O)CH₂Cl led to the cyclized product [Pt₂{SCH₂C(O)NHNHC(O)CH₂S}(PPh₃)₄]²⁺ which showed two different PPh₃ environments in the ³¹P{¹H} NMR spectrum, as a result of non-fluxional behavior of the dithiolate ligand in solution. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the ortho and para isomers of the phenylenediamine-derived bis(chloroacetamides) ClCH₂C(O)NHC₆H₄NHC(O)CH₂Cl gave tetrametallic complexes containing two {Pt₂S₂} moieties spanned by the CH₂C(O)NHC₆H₄NHC(O)CH₂ group. Both the ortho and para isomers were crystallographically characterized; in the ortho isomer there is intramolecular CO···H-N and S···H-N hydrogen bonding involving the two amide groups.     

Heterobimetallic platinum-bismuth aggregates derived from [Pt2(μ-S)2(PPh3)4]

The metalloligand [Pt₂(μ-S)₂(PPh₃)₄] reacts with Bi(S₂CNEt₂)₃ or Bi(S₂COEt)₃ in methanol to produce the orange cationic adducts [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]⁺ and [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂COEt)₂]⁺, respectively, isolated as their hexafluorophosphate salts. An X-ray structure determination on [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]PF₆ reveals the presence of a six-coordinated bismuth centre with an approximately nido-pentagonal bipyramidal coordination geometry. Fragmentation pathways for both complexes have been probed using electrospray ionisation mass spectrometry; ions [Pt₂(μ-S)₂(PPh₃)₂Bi(S₂CXEt_n)₂]⁺ (X = O, n = 1, X = N, n = 2) are formed by selective loss of two PPh₃ ligands, and at higher cone voltages the species [(Ph₃P)PtS₂Bi]⁺ is observed. Ions formed by loss of CS₂ are also observed for the xanthate but not the dithiocarbamate ions.     

A one-dimensional copper (II) coordination polymer [Cu3(ampym)2(μ1,1-N3)4(μ1,3-N3)2(dmf)2]n (ampym = 2-aminopyrimidine) containing both end-on and end-to-end azido bridges

A new polynuclear copper (II) complex, derived from the azido-bridging ligand and 2-aminopyrimidine, has been synthesized and its 3-D structure has been determined by X-ray diffraction methods at two different temperatures. The compound crystallizes in the triclinic system space group, with the central copper atom lying on an inversion centre. The crystal structure is built up by trinuclear units (each of them contains two double end-on azido bridges) linked through two azide ions in an end-to-end (EE) fashion, to yield the polymer chain [Cu₃(ampym)₂(μ_1,1-N₃)₄(μ_1,3-N₃)₂(dmf)₂]_n. Magnetic susceptibility measurement shows a ferromagnetic interaction above 30 K, whereas a weak anti-ferromagnetic interaction prevails in the range of 30-2 K.     

N-Heterocyclic carbene gold(I) and silver(I) adducts of [Pt2(μ-S)2(PPh3)4]

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with the N-heterocyclic carbene (NHC) complexes IPrAuCl, IMesAuCl and IMesAgCl in methanol gave the first examples of metal adducts of [Pt₂(μ-S)₂(PPh₃)₄] that contain NHC ligands, namely [Pt₂(μ-S)₂(PPh₃)₄AuL]⁺ (L = IPr, IMes) and [Pt₂(μ-S)₂(PPh₃)₄AgIMes]⁺. The complexes were isolated as hexafluorophosphate salts. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess IPrAuCl in refluxing methanol yielded only the mono-adduct, in contrast to the behaviour with the gold(I) phosphine complex Ph₃PAuCl, which undergoes double addition giving [Pt₂(μ-SAuPPh₃)₂(PPh₃)₄]²⁺. The X-ray structure of [Pt₂(μ-S)₂(PPh₃)₄AuIPr]PF₆ was determined and reveals that the ‘free’ sulfide is substantially sterically protected by the IPr ligand, accounting for the low reactivity towards addition of a second AgIPr⁺ moiety.     

Synthesis and characterisation of [Pt2(μ-S)(μ-I)(PPh3)4] - A cationic iodo analogue of the metalloligand [Pt2(μ-S)2(PPh3)4]

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a number of transition metal-iodo complexes leads to the formation of the cationic iodo analogue [Pt₂(μ-S)(μ-I)(PPh₃)₄]⁺, identified using electrospray ionisation mass spectrometry (ESI MS). Synthetic routes to this complex were developed, using the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with either [PtI₂(PPh₃)₂] or elemental iodine. The complex was characterised by NMR spectroscopy, ESI MS and an X-ray structure determination, which reveals the presence of a planar, disordered {Pt₂SI}⁺ core. Monitoring the iodine reaction by ESI MS allows the identification of various iodine species, including the short-lived intermediate [Pt₂(μ-S)₂(PPh₃)₄I]⁺, which allows a mechanism for the reaction to be proposed.     

Hydrido-derivatives of [Ir4(CO)10(diphosphine)]: X-ray analyses of [Ir4H(CO)9(μ-Ph2PH(CH3)PPh2)] and [Ir4 H(CO)9(μ-Ph2P(CH2)nPPh2)] (n = 2, 3)

Some novel hydrido-anions of general formula [Ir₄H(CO)₉(μ-L-L)]⁻ (L-L = Ph₂PCH(CH₃)PPh₂, Ph₂P(CH₂)₂PPh₂, Ph₂P(CH₂)₃PPh₂ and Ph₂AsCH₂AsPh₂) have been obtained by the reaction of [Ir₄(CO)₁₀(μ-L-L)] with the base 1,8-diazabicyclo[5.4.0]undec-7-ene in wet dichloromethane. According to IR and ¹H, ³¹P and ¹³C NMR data at low temperature, these anionic derivatives display a single conformation in solution: three edge-bridging COs around the triangular basal face and both the hydride and the bidentate ligands located in axial positions relative to this face. The structures of four compounds were established by X-ray diffraction studies, which confirmed the configuration proposed on the basis of spectroscopic data.     

Extending the coordination chemistry of cobalt with the metalloligand [Pt2(μ-S)2(PPh3)4]: Synthesis of the first cobalt(III) derivatives

The coordination chemistry of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] towards cobalt(II) and cobalt(III) centres has been explored using an electrospray ionisation mass spectrometry (ESI MS)-directed methodology. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with CoCl₂·6H₂O in methanol gave a green-yellow suspension of the known adduct [Pt₂(μ-S)₂(PPh₃)₄CoCl₂], and the CoBr₂ adduct could be similarly prepared. When in situ-generated [Pt₂(μ-S)₂(PPh₃)₄CoCl₂] is reacted with 8-hydroxyquinoline (HQ) and base, the initial product is the cobalt(II) adduct [Pt₂(μ-S)₂(PPh₃)₄CoQ]⁺, which is then converted in air to the cobalt(III) adduct [Pt₂(μ-S)₂(PPh₃)₄CoQ₂]⁺, isolated as its hexafluorophosphate salt. The corresponding picolinate (Pic) derivative [Pt₂(μ-S)₂(PPh₃)₄Co(Pic)₂]⁺ was similarly prepared, however reaction of [Pt₂(μ-S)₂(PPh₃)₄], CoCl₂·6H₂O and 8-(tosylamino)quinoline (HTQ) produced only the cobalt(II) adduct [Pt₂(μ-S)₂(PPh₃)₄CoTQ]⁺. Reactions of [Pt₂(μ-S)₂(PPh₃)₄], CoCl₂·6H₂O and dithiocarbamates gave cobalt(III) complexes [Pt₂(μ-S)₂(PPh₃)₄Co(S₂CNR₂)₂]⁺ [R = Et or R₂ = (CH₂)₄], and proceeded much more rapidly, consistent with the known ability of the dithiocarbamate ligand to stabilize cobalt in higher oxidation states. A study of the fragmentation of cobalt(III) adducts by positive-ion ESI mass spectrometry indicated that [Pt₂(μ-S)₂(PPh₃)₄CoQ₂]⁺ fragments to form the radical cation [Pt₂(μ-S)₂(PPh₃)₄]⁺, which could also be generated by ESI MS analysis of [Pt₂(μ-S)₂(PPh₃)₄] in methanol-NaOH solution. In contrast, the corresponding indium(III) derivative [Pt₂(μ-S)₂(PPh₃)₄InQ₂]⁺, and the cobalt(III) dithiocarbamate [Pt₂(μ-S)₂(PPh₃)₄Co(S₂CN(CH₂)₄)₂]⁺ are much more reluctant to fragment under analogous conditions, and the differences are discussed in terms of cobalt(III) redox chemistry.     

Further studies on the coordination chemistry of [Pt2(μ-S)2(PPh3)4] towards indium(III) substrates

The reactivity of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] towards a variety of indium(III) substrates has been explored. Reaction with excess In(NO₃)₃ and halide (KBr or NaI) gave the four-coordinate adducts [Pt₂(μ-S)₂(PPh₃)₄InX₂]⁺[InX₄]⁻ (X = Br, I). An X-ray structure determination on the iodo complex revealed a slightly distorted tetrahedral coordination geometry at indium. In contrast, reaction of [Pt₂(μ-S)₂(PPh₃)₄] with indium(III) chloride was more complex; the ion [Pt₂(μ-S)₂(PPh₃)₄InCl₂]⁺ was initially observed in solution (using ESI mass spectrometry), and isolated as its BPh₄⁻ salt. Analysis of [Pt₂(μ-S)₂(PPh₃)₄InCl₂]⁺[BPh₄]⁻ by ESI MS showed the parent cation when analysed in MeCN solution. However in solutions containing methanol, partial solvolysis occurred to give the di-indium species [{Pt₂(μ-S)₂(PPh₃)₄InCl(OMe)}₂]²⁺ (proposed to contain an In₂(μ-OMe)₂ unit with five-coordinate indium) and its fragment ion [Pt₂(μ-S)₂(PPh₃)₄InCl(OMe)]⁺. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with InCl₃·3H₂O, 8-hydroxyquinoline (HQ) and trimethylamine in methanol gave the adduct [Pt₂(μ-S)₂(PPh₃)₄InQ₂]⁺, isolated as its PF₆⁻ salt. The same cationic complex is formed when [Pt₂(μ-S)₂(PPh₃)₄] is reacted with InQ₃ in methanol, but in this case the product is contaminated with the mononuclear complex [(Ph₃P)₂PtQ]⁺ formed by disintegration of the trinuclear complex [Pt₂(μ-S)₂(PPh₃)₄InQ₂]⁺ with byproduct Q⁻. [(Ph₃P)₂PtQ]⁺BPh₄⁻ was independently prepared from cis-[PtCl₂(PPh₃)₂] and HQ/Me₃N, and is the first example of a platinum 8-hydroxyquinolinate complex containing phosphine ligands.