Enantioselective ene‐reduction of E‐2‐cyano‐3‐(furan‐2‐yl) acrylamide by marine and terrestrial fungi and absolute configuration of (R)‐2‐cyano‐3‐(furan‐2‐yl) propanamide determined by calculations of electronic circular dichroism (ECD) spectra

This work reports the green organic chemistry synthesis of E‐2‐cyano‐3(furan‐2‐yl) acrylamide under microwave radiation (55 W), as well as the use of filamentous marine and terrestrial‐derived fungi, in the first ene‐reduction of 2‐cyano‐3‐(furan‐2‐yl) acrylamide to (R)‐2‐cyano‐3‐(furan‐2‐yl)propanamide. The fungal strains screened included Penicillium citrinum CBMAI 1186, Trichoderma sp. CBMAI 932 and Aspergillus sydowii CBMAI 935, and the filamentous terrestrial fungi Aspergillus sp. FPZSP 146 and Aspergillus sp. FPZSP 152. A compound with an uncommon CN‐bearing stereogenic center at the α‐C position was obtained by enantioselective reactions mediated in the presence of the microorganisms yielding the (R)‐2‐cyano‐3‐(furan‐2‐yl) propanamide 3a . Its isolated yield and e.e. ranged from 86% to 98% and 39% to 99%, respectively. The absolute configuration of the biotransformation products was determined by time‐dependent density functional theory (TD‐DFT) calculations of electronic circular dichroism (ECD) spectra. Finally, the tautomerization of 2‐cyano‐3‐(furan‐2‐yl) propanamide 3a to form an achiral ketenimine was observed and investigated in presence of protic solvents.     

Cyclopenta[c]thiophene‐4,6‐dione‐Based Copolymers as Organic Photovoltaic Donor Materials

A class of “push‐pull” conjugated copolymers based on cyclopenta[c]thiophene‐4,6‐dione (CTD) and benzodithiophene (BDT) is synthesized for application as an electron donor in organic photovoltaics (OPV). Given the diverse electronic and structural tunability of the CTD unit, specific CTD‐containing copolymers are chosen with the aid of theoretical calculations from a broad array of potential candidate materials. Evaluation of the chosen materials as OPV absorbers includes characterization of the optical, electronic, and structural properties of the polymer films using UV‐vis absorbance, photoluminescence, cyclic voltammetry, and X‐ray diffraction techniques. In addition, the contactless time‐resolved microwave conductivity (TRMC) technique is used to measure the photoconductance of polymer/fullerene blends. Excellent correlation between measured photoconductance and OPV device efficiency is demonstrated with these materials and TRMC is discussed as a tool for screening potential active layer materials for OPV devices.     

Plasmon‐Active Nano‐Aperture Window Electrodes for Organic Photovoltaics

A lithography free approach to fabricating optically thin (～10 nm) noble metal electrodes with a dense array of sub‐wavelength apertures is reported. These nano‐structured electrodes support surface plasmon resonances which couple strongly with visible light concentrating it near to the electrode surface. They are also remarkably robust and can be fabricated on glass and plastic substrates with a sheet resistance of <15 Ω sq^?1. As the window electrode in solution processed and vacuum deposited organic photovoltaics (OPV) the photocurrent is increased by as much as 28% as compared to identical devices without apertures, demonstrating that the apertures do not need to have a tight size and/or shape distribution to be effective. As a drop‐in replacement for the indium‐tin oxide electrode in flexible OPV these plasmon‐active electrodes offer superior performance; 5.1% vs. 4.6%, demonstrating that this class of electrode is a truly viable alternative to conducting oxide window electrodes for OPV.     

Efficient Non‐Fullerene Organic Photovoltaic Modules Incorporating As‐Cast and Thickness‐Insensitive Photoactive Layers

In this work, a new combination of a wide bandgap polymer poly[4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]‐dithiophene‐alt‐N‐(2‐hexyldecyl)‐5′5‐bis[3‐(decylthio)thiophene‐2‐yl]‐2′2‐bithiophene‐3′3‐dicarboximide] (PBTIBDTT) and a non‐fullerene small molecule acceptor based on a bulky seven‐ring fused core (indacenodithieno[3,2‐b]thiophene) end‐capped with 2‐(3‐oxo‐2,3‐dihydroinden‐1‐ylidene)malononitrile groups with one fluorine substituent (ITIC‐F) is proposed, and as‐cast non‐fullerene organic solar cells (NFOSCs) with 11.2% efficiency are achieved. The device efficiencies are also insensitive to the variation of photoactive layer (PAL) thickness and can maintain over 9% efficiency as PAL thickness increases to 350 nm, which is one of the best results for as‐cast organic solar cells. More importantly, non‐fullerene organic photovoltaic (OPV) modules are demonstrated via laser ablation technique for the first time, which delivers a record efficiency of 8.6% (with active area of 3.48 cm²) among large‐area OPV modules. Furthermore, the morphology and performance evolutions of the as‐cast NFOSCs and the ones processed with solvent additive are systematically investigated. The results demonstrate the great advantage of as‐cast solar cells in achieving constant morphology and high performance with thick PALs. The NFOSCs fabricated with simple procedure, insensitive to film thickness and compatible with large‐area OPV modules, show significant potential for application the future.     

Carrier‐Selectivity‐Dependent Charge Recombination Dynamics in Organic Photovoltaic Cells with a Ferroelectric Blend Interlayer

Interfacial energetics determines the performance of organic photovoltaic (OPV) cells based on a thin film of organic semiconductor blends. Here, an approach to modulating the “carrier selectivity” at the charge collecting interfaces and the consequent variations in the nongeminate charge carrier recombination dynamics in OPV devices are demonstrated. A ferroelectric blend interfacial layer composed of a solution‐processable ferroelectric poly­mer and a wide bandgap semiconductor is introduced as a tunable electron selective layer in inverted OPV devices with non‐Ohmic contact electrodes. The direct rendering of dipole alignment within the ferroelectric blend layer is found to increase the carrier selectivity of the charge collecting interfaces up to two orders of magnitude. Transient photovoltaic analyses reveal that the increase of carrier selectivity significantly reduces the diffusion and recombination among minority carriers in the vicinity of the electrodes, giving rise to the 85% increased charge carrier lifetime. Furthermore, the carrier‐selective charge extraction leads to the constitution of the internal potential within the devices, even with energetically identical cathodes and anodes. With these carrier‐selectivity‐controlled interlayers, the devices based on various photoactive materials commonly display significant increments in the device performances, especially with the high fill factor of up to 0.76 under optimized conditions.     

Cytotoxic and Apoptosis‐Inducing Activities,and Anti‐Tumor‐Promoting Effects of Cyanogenated and Oxygenated Triterpenes

Two of each semisynthetic lanostane‐ and cycloartane‐type triterpenes with a cyano‐enone functionality, i.e., 13 and 18 , and 23 and 28 , respectively, sixteen of their synthetic intermediates, 9 – 12, 14 – 17, 19 – 22 , and 24 – 27 , along with seven semisynthetic oxygenated triterpene acetates, 29 – 35 , and eight natural hydroxy triterpenes, 1 – 8 , were evaluated for their cytotoxic activities against leukemia (HL60), lung (A549), stomach (AZ521), and breast (SK‐BR‐3) cancer cell lines. One natural triterpene, 8 , and ten semisynthetic triterpenes, 9, 13, 15, 18, 23, 25, 28, 29, 32 , and 33 , exhibited potent cytotoxicities against one or more cell lines with IC₅₀ values in the range of 1.4–9.9 μM . Two lanostane‐type triterpenes with a cyano‐enone functionality, 3‐oxolanosta‐1,8,24‐triene‐2‐carbonitrile ( 13 ) and 3‐oxolanosta‐1,8‐diene‐2‐carbonitrile ( 18 ), induced apoptosis in HL60 cells, as observed by membrane phospholipid exposure in flow cytometry. Western blot analysis showed that 13 and 18 significantly reduced procaspases‐3, ‐8, and ‐9, and increased cleaved caspases‐3, ‐8, and ‐9. These findings indicated that compounds 13 and 18 induced apoptosis in HL60 cells via both the mitochondrial and the death receptor‐mediated pathways. In addition, upon evaluation of the inhibitory effects on Epstein? Barr virus early antigen (EBV‐EA) activation induced with 12‐O‐tetradecanoylphorbol‐13‐acetate (TPA) in Raji cells, seven natural triterpenes, 1 – 6 and 8 , and ten semisynthetic triterpenes, 9, 10, 14, 15, 19, 20, 24, 25, 29 , and 30 , exhibited inhibitory effects which were higher than that of β‐carotene, a vitamin A precursor studied widely in cancer‐chemoprevention animal models.     

Nanofiber‐Based Bulk‐Heterojunction Organic Solar Cells Using Coaxial Electrospinning

Nanofibers consisting of the bulk heterojunction organic photovoltaic (BHJ–OPV) electron donor–electron acceptor pair poly(3‐hexylthiophene):phenyl‐C₆₁‐butyric acid methyl ester (P3HT:PCBM) are produced through a coaxial electrospinning process. While P3HT:PCBM blends are not directly electrospinnable, P3HT:PCBM‐containing fibers are produced in a coaxial fashion by utilizing polycaprolactone (PCL) as an electrospinnable sheath material. Pure P3HT:PCBM fibers are easily obtained after electrospinning by selectively removing the PCL sheath with cyclopentanone (average diameter 120 ± 30 nm). These fibers are then incorporated into the active layer of a BHJ–OPV device, which results in improved short‐circuit current densities, fill factors, and power‐conversion efficiencies (PCE) as compared to thin‐film devices of identical chemical composition. The best‐performing fiber‐based devices exhibit a PCE of 4.0%, while the best thin‐film devices have a PCE of 3.2%. This increase in device performance is attributed to the increased in‐plane alignment of P3HT polymer chains on the nanoscale, caused by the electrospun fibers, which leads to increased optical absorption and subsequent exciton generation. This methodology for improving device performance of BHJ–OPVs could also be implemented for other electron donor–electron acceptor systems, as nanofiber formation is largely independent of the PV material.     

Cold chain and virus‐free chloroplast‐made booster vaccine to confer immunity against different poliovirus serotypes

The WHO recommends complete withdrawal of oral polio vaccine (OPV) type 2 by April 2016 globally and replacing with at least one dose of inactivated poliovirus vaccine (IPV). However, high‐cost, limited supply of IPV, persistent circulating vaccine‐derived polioviruses transmission and need for subsequent boosters remain unresolved. To meet this critical need, a novel strategy of a low‐cost cold chain‐free plant‐made viral protein 1 (VP1) subunit oral booster vaccine after single IPV dose is reported. Codon optimization of the VP1 gene enhanced expression by 50‐fold in chloroplasts. Oral boosting of VP1 expressed in plant cells with plant‐derived adjuvants after single priming with IPV significantly increased VP1‐IgG1 and VP1‐IgA titres when compared to lower IgG1 or negligible IgA titres with IPV injections. IgA plays a pivotal role in polio eradication because of its transmission through contaminated water or sewer systems. Neutralizing antibody titres (~3.17–10.17 log₂ titre) and seropositivity (70–90%) against all three poliovirus Sabin serotypes were observed with two doses of IPV and plant‐cell oral boosters but single dose of IPV resulted in poor neutralization. Lyophilized plant cells expressing VP1 stored at ambient temperature maintained efficacy and preserved antigen folding/assembly indefinitely, thereby eliminating cold chain currently required for all vaccines. Replacement of OPV with this booster vaccine and the next steps in clinical translation of FDA‐approved antigens and adjuvants are discussed.     

Ultra‐High Voltage Multijunction Organic Solar Cells for Low‐Power Electronic Applications

Low power electronics are an ideal application for organic photovoltaics (OPV) where a low‐cost OPV device can be integrated directly with a battery to provide a constant power source. We demonstrate ultra‐high voltage small molecule multijunction devices with open circuit voltage (V_OC) values of up to 7V. Optical modelling is employed to aid the optimisation of the complex multi‐layer stacks and ensure current balancing is achieved between sub‐cells, and optimised multijunction devices show power conversion efficiencies of up to 3.4% which is a modest increase over the single junction devices. Sub‐cell donor/acceptor pairs of boron subphthalocyanine chloride (SubPc)/fullerene (C₆₀) and SubPc/Cl₆‐SubPc were selected both for their high V_OC in order to minimise the required number of junctions, but also for their absorption overlap to reduce the spectral dependence of the device performance. As a result, the devices are shown to directly charge a micro‐energy cell type battery under both low illumination intensity white light and monochromatic illumination.     

Nanowire Interconnects for Printed Large‐Area Semitransparent Organic Photovoltaic Modules

Semitransparent organic photovoltaic (OPV) cells promise applications in various transparent architectures where their opaque counterparts cannot contribute. Realizing practical applications of this technology requires the manufacturing of large‐area modules without significant performance loss compared to the lab‐scale devices. In this work, efficient semitransparent OPV modules based on ultrafast laser patterning on both glass and flexible substrates are reported. Solution‐processed metallic silver nanowires (AgNWs) are used as transparent top electrodes. The efficient low‐ohmic contact of the interconnects between the top AgNWs and the bottom electrode in combination with high‐precision laser beam positioning system allow to fabricate semitransparent modules with high electrical fill factor of ≈63% and a remarkable geometric fill factor exceeding 95%, respectively. These results represent an important progress toward upscaling of high‐performance OPV modules with reduced production costs.     

4‐Cyano‐α‐methyl‐l‐phenylalanine as a Spectroscopic Marker for the Investigation of PeptaibioticMembrane Interactions

Two analogs of the ten‐amino acid residue, membrane‐active lipopeptaibiotic trichogin GA IV, mono‐labeled with 4‐cyano‐α‐methyl‐L ‐phenylalanine, a potentially useful fluorescence and IR absorption probe of the local microenvironment, were synthesized by the solid‐phase methodology and conformationally characterized. The single modification was incorporated either at the N‐terminus (position 1) or near the C‐terminus (position 8) of the peptide main chain. In both cases, the replaced amino acid was the equally helicogenic α‐aminoisobutyric acid (Aib) residue. We performed a solution conformational analysis by use of FT‐IR absorption, CD, and 2D‐NMR spectroscopies. The results indicate that both labeled analogs essentially maintain the overall helical propensity of the naturally occurring lipopeptaibiotic. Peptide? membrane interactions were assessed by fluorescence and ATR‐IR absorption techniques. Analogies and differences between the two peptides were highlighted. Taken together, our data confirm literature results that some of the spectroscopic parameters of the 4‐cyanobenzyl chromophore are sensitive markers of the local microenvironment.     

A new generation of cross‐linkers for selective detection by MALDI MS

We designed a new cross‐linker bearing a CHCA moiety. The use of the CHCA‐tagged cross‐linker JMV 3378 in conjunction with a neutral MALDI matrix α‐cyano‐4‐hydroxycinnamic methyl ester enabled specific signal enhancement in MALDI‐TOF MS of cross‐link containing peptides. Discrimination between modified and non‐modified peptides can be achieved by comparison of two spectra, one using CHCA and the other using the α‐cyano‐4‐hydroxycinnamic methyl ester matrix. The methodology was validated using cytochrome c and apo‐myoglobine as model proteins.     

A Combined Hydroxylation of 3‐Cyanopyridine to 3‐Cyano‐6‐hydroxypyridine and 6‐Hydroxynicotinic Acid by Resting Cells of Comamonas testosteroni JA1 Grown on Nicotinic Acid

A strain of Comamonas testosteroni JA1 known for its capacity to hydroxylate 3‐cyanopyridine to 3‐cyano‐6‐hydroxypyridine was found to be also capable to hydroxylate nicotinic acid at a higher rate. In the course of the induced cultivation the forming 6‐hydroxynicotinic acid was degraded either slightly, in the presence of nicotinic acid in the medium, or faster, in the absence of nicotinic acid. In a combined process of hydroxylation of nicotinic acid by growing culture and hydroxylation of 3‐cyanopyridine by resting cells of Comamonas testosteroni JA1, not only an additional amount of 50.38 g of solid 6‐hydroxynicotinic acid was produced from 1 L of cultivation broth with a 99.97 % molar conversion yield, but also the yield of 3‐cyano‐6‐hydroxypyridine produced was more than doubled. This can be compared to that of the resting cells from the induced cultivation broth where within 8 h an amount of 5.77 g of solid 3‐cyano‐6‐hydroxypyridine was produced by resting cells from 1 L of the cultivation broth. This also was superior to 4.39 g/L of cultivation broth of resting cells reported in the literature.     

New Derivatives from Microbial Transformation of ent‐Kaur‐16‐en‐19‐oic Acid by Cunninghamella echinulata

Biotransformation of ent‐kaur‐16‐en‐19‐oic acid using fungus Cunninghamella echinulata resulted in two novel hydroxylated metabolites together with five known compounds. Their structures were elucidated by means of extensive NMR and HR‐ESI‐MS data analysis. The eight compounds were measured for their cytotoxicity against the human breast carcinoma (MCF‐7) and human hepatoblastoma (HepG‐2) cell lines. Seven compounds showed no cytotoxicity to the two cell lines. One compound displayed moderate cytotoxicity against HepG‐2 and MCF‐7 with the IC₅₀ values of 12.6 and 27.1 μM, respectively.     

Atomic‐Layer‐Deposited Aluminum and Zirconium Oxides for Surface Passivation of TiO2 in High‐Efficiency Organic Photovoltaics

The reduction in electronic recombination losses by the passivation of surfaces is a key factor enabling high‐efficiency solar cells. Here a strategy to passivate surface trap states of TiO₂ films used as cathode interlayers in organic photovoltaics (OPVs) through applying alumina (Al₂O₃) or zirconia (ZrO₂) insulating nanolayers by thermal atomic layer deposition (ALD) is investigated. The results suggest that the surface traps in TiO₂ are oxygen vacancies, which cause undesirable recombination and high electron extraction barrier, reducing the open‐circuit voltage and the short‐circuit current of the complete OPV device. It is found that the ALD metal oxides enable excellent passivation of the TiO₂ surface followed by a downward shift of the conduction band minimum. OPV devices based on different photoactive layers and using the passivated TiO₂ electron extraction layers exhibit a significant enhancement of more than 30% in their power conversion efficiencies compared to their reference devices without the insulating metal oxide nanolayers. This is a result of significant suppression of charge recombination and enhanced electron extraction rates at the TiO₂/ALD metal oxide/organic interface.     

ITO‐Free and Fully Solution‐Processed Semitransparent Organic Solar Cells with High Fill Factors

Organic photovoltaic (OPV) solar cells that can be simply processed from solution are in the focus of the academic and industrial community because of their enormous potential to reduce cost. One big challenge in developing a fully solution‐processed OPV technology is the design of a well‐performing electrode system, allowing the replacement of ITO. Several solution‐processed electrode systems were already discussed, but none of them could match the performance of ITO. Here, we report efficient ITO‐free and fully solution‐processed semitransparent inverted organic solar cells based on silver nanowire (AgNW) electrodes. To demonstrate the potential of these AgNW electrodes, they were employed as both the bottom and top electrodes. Record devices achieved fill factors as high as 63.0%, which is comparable to ITO based reference devices. These results provide important progress for fully printed organic solar cells and indicate that ITO‐free, transparent as well as non‐transparent organic solar cells can indeed be fully solution‐processed without losses.     

Synthesis and Biological Evaluation of Novel 1′‐Branched and Spironucleoside Analogues

Novel anomeric spironucleosides and 1′‐cyano‐2′,3′‐didehydro‐2′,3′‐dideoxyuridine, a structural analogue of known anti‐HIV agents, were prepared by nucleophilic addition of organolithium reagents to 1′‐cyano‐2′‐deoxy‐ and 1′‐cyano‐2′‐deoxy‐2′β‐bromo‐uridine derivatives, respectively. The yield and distribution of products depended on the reaction conditions, which were studied in detail. Although none of the compounds exhibited antiviral activity, two compounds displayed cytostatic activity against both murine leukemia and human T‐lymphocyte cells.     

6‐O‐(3″, 4″‐di‐O‐trans‐cinnamoyl)‐α‐l‐rhamnopyranosylcatalpol and verbascoside: Cytotoxicity,cell cycle kinetics,apoptosis, and ROS production evaluation in tumor cells

The aim of this study was to evaluate the impact that 6‐O‐(3″, 4″‐di‐O‐trans‐cinnamoyl)‐α‐ l ‐rhamnopyranosylcatalpol (Dicinn) and verbascoside (Verb), two compounds simultaneously reported in Verbascum ovalifolium, have on tumor cell viability, apoptosis, cell cycle kinetics, and intracellular reactive oxygen species (ROS) level. At 100 µg/mL and 48 hours incubation time, Dicinn and Verb produced good cytotoxic effects in A549, HT‐29, and MCF‐7 cells. Dicinn induced cell‐cycle arrest at the G₀/G₁ phase and apoptosis, whereas Verb increased the population of subG₁ cells and cell apoptosis rates. Furthermore, the two compounds exhibited time‐dependent ROS generating effects in tumor cells (1‐24 hours). Importantly, no cytotoxic effects were induced in nontumor MCF‐10A cells by the two compounds up to 100 µg/mL. Overall, the effects exhibited by Verb in tumor cells were more potent, which can be correlated with its structural features, such as the presence of phenolic hydroxyl groups.     

Synthesis of 3‐Methylidene‐1‐tosyl‐2,3‐dihydroquinolin‐4(1H)‐ones as Potent Cytotoxic Agents

An efficient synthetic strategy to 3‐methylidene‐2,3‐dihydroquinolin‐4(1H)‐ones variously substituted in position 2 has been developed. The title compounds were synthesized in the reaction sequence involving reaction of diethyl methylphosphonate with methyl 2‐(tosylamino)benzoate, condensation of thus formed diethyl 2‐oxo‐2‐(2‐N‐tosylphenyl)ethylphosphonate with various aldehydes followed by successful application of the obtained 3‐(diethoxyphosphoryl)‐1,2‐dihydroquinolin‐4‐ols as Horner–Wadsworth–Emmons reagents for the olefination of formaldehyde. Also, enantioselective approach to the target compounds has been evaluated using 3‐dimenthoxyphosphoryl group as a chiral auxiliary. Single X‐ray crystal analysis of (2S)‐3‐(dimenthoxyphosphoryl)‐2‐phenyl‐1‐tosyldihydroquinolin‐4‐ol revealed the presence of strong resonance‐assisted hydrogen bond (RAHB). The obtained 3‐methylidene‐2,3‐dihydroquinolin‐4(1H)‐ones were then tested for their cytotoxic activity against two leukemia cell lines NALM‐6 and HL‐60 and a breast cancer MCF‐7 cell line. All compounds showed very high cytotoxic activity with the IC₅₀ values mostly below 1 μm in all three cancer cell lines. The selected analogs were also tested on human umbilical vein endothelial cells (HUVEC) and on human mammary gland/breast cells (MCF‐10A) to evaluate their influence on normal cells. Since one of the most serious problems in cancer chemotherapy is the development of drug resistance, the mRNA levels and activity of ABCB1 transporter considered to be the most important factor engaged in drug resistance, were evaluated in MCF‐7 cells treated with two selected analogs. Both compounds were strong ABCB1 transporter inhibitors that could prevent efflux of anticancer drugs from cancer cells.     

Quantitative Morphology–Performance Correlations in Organic Solar Cells: Insights from Soft X‐Ray Scattering

Organic/polymer semiconductors provide unique possibilities and flexibility in tailoring their optoelectronic properties to match specific application demands. One of the key factors contributing to the rapid and continuous progress of organic photovoltaics (OPVs) is the control and optimization of photoactive‐layer morphology. The impact of morphology on photovoltaic parameters has been widely observed. However, the highly complex and multilength‐scale morphology often formed in efficient OPV devices consisting of compositionally similar components impose obstacles to conventional morphological characterizations. In contrast, due to the high compositional and orientational sensitivity, resonant soft X‐ray scattering (R‐SoXS), and related techniques lead to tremendous progress of characterization and comprehension regarding the complex mesoscale morphology in OPVs. R‐SoXS is capable of quantifying the domain characteristics, and polarized soft X‐ray scattering (P‐SoXS) provides quantitative information on orientational ordering. These morphological parameters strongly correlate the fill factor (FF), open‐circuit voltage (V_oc), as well as short‐circuit current (J_sc) in a wider range of OPV devices, including recent record‐efficiency polymer:fullerene solar cells and 12%‐efficiency fullerene‐free OPVs. This progress report will delineate the soft X‐ray scattering methodology and its future challenges to characterize and understand functional organic materials and provide a non‐exhaustive overview of R‐SoXS characterization and its implication to date.