Crystal structures of the catalytic domain of human stromelysin-1 (MMP-3) and collagenase-3 (MMP-13) with a hydroxamic acid inhibitor SM-25453

Crystal structures of the catalytic domain of human stromelysin-1 (MMP-3) and collagenase-3 (MMP-13) with a hydroxamic acid inhibitor SM-25453 have been solved at 2.01 and 2.37A resolutions, respectively. The results revealed that the binding modes for this inhibitor to MMP-3 and -13 were quite similar. However, subtle comparative differences were observed at the bottom of S1' pockets, which were occupied with the guanidinomethyl moiety of the inhibitor. A remarkable feature of the inhibitor was the deep penetration of its long aliphatic chain into the S1' pocket and exposure of the guanidinomethyl moiety to the solvent.     

Osteopontin, a novel substrate for matrix metalloproteinase-3 (stromelysin-1) and matrix metalloproteinase-7 (matrilysin)

Osteopontin (OPN) is a secreted phosphoprotein shown to function in wound healing, inflammation, and tumor progression. Expression of OPN is often co-localized with members of the matrix metalloproteinase (MMP) family. We report that OPN is a novel substrate for two MMPs, MMP-3 (stromelysin-1) and MMP-7 (matrilysin). Three cleavage sites were identified for MMP-3 in human OPN, and two of those sites were also cleaved by MMP-7. These include hydrolysis of the human Gly166-Leu167, Ala201-Tyr202 (MMP-3 only), and Asp210-Leu211 peptide bonds. Only the N-terminal Gly-Leu cleavage site is conserved in rat OPN (Gly151-Leu152). These sites are distinct from previously reported cleavage sites in OPN for the proteases thrombin or enterokinase. We found evidence for the predicted MMP cleavage fragments of OPN in vitro in tumor cell lines, and in vivo in remodeling tissues such as the postpartum uterus, where OPN and MMPs are co-expressed. Furthermore, cleavage of OPN by MMP-3 or MMP-7 potentiated the function of OPN as an adhesive and migratory stimulus in vitro through cell surface integrins. We predict that interaction of MMPs with OPN at tumor and wound healing sites in vivo may be a mechanism of regulation of OPN bioactivity.     

Direct measurement of protein binding energetics by isothermal titration calorimetry.

Of all the techniques that are currently available to measure binding, isothermal titration calorimetry is the only one capable of measuring not only the magnitude of the binding affinity but also the magnitude of the two thermodynamic terms that define the binding affinity: the enthalpy (AH) and entropy (AS) changes. Recent advances in instrumentation have facilitated the development of experimental designs that permit the direct measurement of arbitrarily high binding affinities, the coupling of binding to protonation/deprotonation processes and the analysis of binding thermodynamics in terms of structural parameters. Because isothermal titration calorimetry has the capability to measure different energetic contributions to the binding affinity, it provides a unique bridge between computational and experimental analysis. As such, it is increasingly becoming an essential tool in molecular design.     

Thermodynamics of aminoglycoside binding to aminoglycoside-3'-phosphotransferase IIIa studied by isothermal titration calorimetry

The aminoglycoside-3'-phosphotransferase IIIa [APH(3')-IIIa] phosphorylates aminoglycoside antibiotics and renders them ineffective against bacteria. APH(3')-IIIa is the most promiscuous aminoglycoside phosphotransferase enzyme, and it modifies more than 10 different aminoglycoside antibiotics. A wealth of information exists about the enzyme; however, thermodynamic properties of enzyme-aminoglycoside complexes are still not known. This study describes the determination of the thermodynamic parameters of the binary enzyme-aminoglycoside and the ternary enzyme-metal-ATP-aminoglycoside complexes of structurally related aminoglycosides using isothermal titration calorimetry. Formation of the binary enzyme-aminoglycoside complexes is enthalpically driven and exhibits a strongly disfavored entropic contribution. Formation of the ternary enzyme-metal-ATP-aminoglycoside complexes yields much smaller negative DeltaH values and more favorable entropic contributions. The presence of metal-ATP generally increases the affinity of aminoglycosides to the enzyme. This is consistent with the kinetic mechanism of the enzyme in which ordered binding of substrates occurs. However, the observed DeltaH values neither correlate with kinetic parameters k(cat), K(m), and k(cat)/K(m) nor correlate with the molecular size of the substrates. Comparison of the thermodynamic properties of the complexes formed by structurally similar aminoglycosides indicated that the 2'- and the 6'-amino groups of the substrates are involved in binding to the enzyme. Thermodynamic properties of the complexes formed by aminoglycosides differing only at the 3'-hydroxyl group suggested that the absence of this group does not alter the thermodynamic parameters of the ternary APH(3')-IIIa-metal-ATP-aminoglycoside complex. Our results also indicate that protonation of ligand and protein ionizable groups is coupled to the complex formation between aminoglycosides and APH(3')-IIIa. Comparison of DeltaH values for different aminoglycoside-enzyme complexes indicates that enzyme and substrates undergo significant conformational changes in complex formation.     

Heparin binding domain peptides of antithrombin III: analysis by isothermal titration calorimetry and circular dichroism spectroscopy.

The serine proteinase inhibitor antithrombin III (ATIII) is a key regulatory protein of intrinsic blood coagulation. ATIII attains its full biological activity only upon binding polysulfated oligosaccharides, such as heparin. A series of synthetic peptides have been prepared based on the proposed heparin binding regions of ATIII and their ability to bind heparin has been assessed by CD spectrometry, by isothermal titration calorimetry, and by the ability of the peptides to compete with ATIII for binding heparin in a factor Xa procoagulant enzyme assay. Peptide F123-G148, which encompasses both the purported high-affinity pentasaccharide binding region and an adjacent, C-terminally directed segment of ATIII, was found to bind heparin with good affinity, but amino-terminal truncations of this sequence, including L130-G148 and K136-G148 displayed attenuated heparin binding activities. In fact, K136-G148 appears to encompass only a low-affinity heparin binding site. In contrast, peptides based solely on the high-affinity binding site (K121-A134) displayed much higher affinities for heparin. By CD spectrometry, these high-affinity peptides are chiefly random coil in nature, but low microM concentrations of heparin induce significant alpha-helix conformation. K121-A134 also effectively competes with ATIII for binding heparin. Thus, through the use of synthetic peptides that encompass part, if not all, of the heparin binding site(s) within ATIII, we have further elucidated the structure-function relations of heparin-ATIII interactions.     

Solution structure and backbone dynamics of the catalytic domain of matrix metalloproteinase-2 complexed with a hydroxamic acid inhibitor

MMP-2 is a member of the matrix metalloproteinase family that has been implicated in tumor cell metastasis and angiogenesis. Here, we describe the solution structure of a catalytic domain of MMP-2 complexed with a hydroxamic acid inhibitor (SC-74020), determined by three-dimensional heteronuclear NMR spectroscopy. The catalytic domain, designated MMP-2C, has a short peptide linker replacing the internal fibronectin-domain insertion and is enzymatically active. Distance geometry-simulated annealing calculations yielded 14 converged structures with atomic root-mean-square deviations (r.m.s.d.) of 1.02 and 1.62 A from the mean coordinate positions for the backbone and for all heavy atoms, respectively, when 11 residues at the N-terminus are excluded. The structure has the same global fold as observed for other MMP catalytic domains and is similar to previously solved crystal structures of MMP-2. Differences observed between the solution and the crystal structures, near the bottom of the S1' specificity loop, appear to be induced by the large inhibitor present in the solution structure. The MMP-2C solution structure is compared with MMP-8 crystal structure bound to the same inhibitor to highlight the differences especially in the S1' specificity loop. The finding provides a structural explanation for the selectivity between MMP-2 and MMP-8 that is achieved by large inhibitors.     

Affinity between TBC1D4 (AS160) phosphotyrosine-binding domain and insulin-regulated aminopeptidase cytoplasmic domain measured by isothermal titration calorimetry

Uptake of circulating glucose into the cells happens via the insulin- mediated signalling pathway, which translocates the glucose transporter 4 (GLUT4) vesicles from the intracellular compartment to the plasma membrane. Rab?GTPases are involved in this vesicle trafficking, where Rab?GTPase-activating proteins (RabGAP) enhance the GTP to GDP hydrolysis. TBC1D4 (AS160) and TBC1D1 are functional RabGAPs in the adipocytes and the skeletonal myocytes, respectively. These proteins contain two phosphotyrosine-binding domains (PTBs) at the amino-terminus of the catalytic RabGAP domain. The second PTB has been shown to interact with the cytoplasmic region of the insulin-regulated aminopeptidase (IRAP) of the GLUT4 vesicle. In this study, we quantitatively measured the ～μM affinity (KD) between TBC1D4 PTB and IRAP using isothermal titration calorimetry, and further showed that IRAP residues 1-49 are the major region mediating this interaction. We also demonstrated that the IRAP residues 1-15 are necessary but not sufficient for the PTB interaction.     

Investigation of ligand binding to the multidrug resistance protein EmrE by isothermal titration calorimetry

Escherichia coli multidrug resistance protein E (EmrE) is an integral membrane protein spanning the inner membrane of Escherichia coli that is responsible for this organism's resistance to a variety of lipophilic cations such as quaternary ammonium compounds (QACs) and interchelating dyes. EmrE is a 12-kDa protein of four transmembrane helices considered to be functional as a multimer. It is an efflux transporter that can bind and transport cytoplasmic QACs into the periplasm using the energy of the proton gradient across the inner membrane. Isothermal titration calorimetry provides information about the stoichiometry and thermodynamic properties of protein-ligand interactions, and can be used to monitor the binding of QACs to EmrE in different membrane mimetic environments. In this study the ligand binding to EmrE solubilized in dodecyl maltoside, sodium dodecyl sulfate and reconstituted into small unilamellar vesicles is examined by isothermal titration calorimetry. The binding stoichiometry of EmrE to drug was found to be 1:1, demonstrating that oligomerization of EmrE is not necessary for binding to drug. The binding of EmrE to drug was observed with the dissociation constant (K(D)) in the micromolar range for each of the drugs in any of the membrane mimetic environments. Thermodynamic properties demonstrated this interaction to be enthalpy-driven with similar enthalpies of 8-12 kcal/mol for each of the drugs in any of the membrane mimetics.     

Thermodynamics of nucleotide and non-ATP-competitive inhibitor binding to MEK1 by circular dichroism and isothermal titration calorimetry

MEK1 is a member of the MAPK signal transduction pathway that responds to growth factors and cytokines. A wealth of information about the enzymatic activity of MEK1, its domain functions, and inhibitor action is available; however, the thermodynamic properties of the interaction between MEK1 and ligands, such as nucleotides and non-ATP-competitive inhibitors, have not been reported. This study describes the thermodynamic parameters for the binding interactions of MEK1, nucleotides, and non-ATP-competitive inhibitor complexes using temperature-dependent circular dichroism (TdCD) and isothermal titration calorimetry (ITC). Non-phosphorylated MEK1 (npMEK1) has a high affinity for both AMP-PNP and ADP (Kd approximately 2microM). The binding is enthalpically favored and Mg-dependent. The active, phosphorylated form of MEK1 (pMEK1) bound nucleotides with a similar high affinity (Kd approximately 2muM) and had a thermodynamic profile and Mg-dependence similar to that of the non-phosphorylated form. The non-ATP-competitive MEK1 inhibitors, U0126 and PD0325901, showed no preference for npMEK1 and pMEK1 by TdCD. TdCD results also showed that these inhibitors are more potent in the presence of the nucleotide than in its absence. The ternary complex, MEK1.PD0325901.nucleotide, showed synergistic binding as evidenced by a large, non-additive shift in the midpoint of the protein unfolding transition (Tm). This was apparent for both npMEK1 and pMEK1 using either ADP or AMP-PNP. ITC binding studies confirmed the synergistic binding effect. The ITC-determined affinity of nucleotide (AMP-PNP, ADP) binding to the npMEK1.PD0325901 complex was enhanced nearly 5-fold compared to nucleotide binding to npMEK1 alone. In addition, the affinity of PD0325901 binding to npMEK1.nucleotide complexes was increased nearly 10-fold relative to the affinity of PD0325901 for npMEK1 alone. These are the first thermodynamic binding studies that characterize the affinity of the allosteric non-ATP-competitive inhibitors U0126 and PD0325901 with and without the nucleotide. The results indicate these allosteric inhibitors have a dynamic range in the type of MEK1 activation states and nucleotide complexes that they can bind.     

Potent and selective 2-naphthylsulfonamide substituted hydroxamic acid inhibitors of matrix metalloproteinase-13

The matrix metalloproteinase enzyme MMP-13 plays a key role in the degradation of type II collagen in cartilage and bone in osteoarthritis (OA). An effective MMP-13 inhibitor would provide a disease modifying therapy for the treatment of arthritis, although this goal still continues to elude the pharmaceutical industry due to issues with safety. Our efforts have resulted in the discovery of a series of hydroxamic acid inhibitors of MMP-13 that do not significantly inhibit MMP-2 (gelatinase-1). MMP-2 has been implicated in the musculoskeletal side effects resulting from pan-MMP inhibition due to findings from spontaneously occurring human MMP-2 deletions. Analysis of the SAR of hundreds of previously prepared hydroxamate based MMP inhibitors lead us to 2-naphthylsulfonamide substituted hydroxamates which exhibited modest selectivity for MMP-13 versus MMP-2. This Letter describes the lead optimization of 1 and identification of inhibitors exhibiting >100-fold selectivity for MMP-13 over MMP-2.     

Thermodynamics of nucleotide binding to the chaperonin GroEL studied by isothermal titration calorimetry: evidence for noncooperative nucleotide binding.

We characterized the thermodynamics of binding reactions of nucleotides ADP and ATPgammaS (a nonhydrolyzable analog of ATP) to GroEL in a temperature range of 5 degrees C to 35 degrees C by isothermal titration calorimetry. Analysis with a noncooperative binding model has shown that the bindings of nucleotides are driven enthalpically with binding constants of 7x103 M-1 and 4x104 M-1 for ADP and ATPgammaS, respectively, at 26 degrees C and that the heat capacity change DeltaCp is about 100 cal/mol.K for both the nucleotides. The stoichiometries of binding were about 8 and 9 molecules for ADP and ATPgammaS, respectively, per GroEL tetradecamer at 5 degrees C, and both increased with temperature to reach about 14 (ADP) and 12 (ATPgammaS) for both nucleotides at 35 degrees C. The absence of initial increase of binding heat as well as Hill coefficient less than 1.2, which were obtained from the fitting to the model curve by assuming positive cooperativity, showed that there was virtually no positive cooperativity in the nucleotide bindings. Incorporating a difference in affinity for the nucleotide (ADP and ATPgammaS) between the two rings of GroEL into the noncooperative binding model improved the goodness of fitting and the difference in the affinity increased with decreasing temperature.     

Discovery of potent and selective succinyl hydroxamate inhibitors of matrix metalloprotease-3 (stromelysin-1)

Structure activity relationships are described for a series of succinyl hydroxamic acids 4a-o as potent and selective inhibitors of matrix metalloprotease-3 (stromelysin-1). Optimisation of P1' and P3' groups gave compound 4j (MMP-3 IC50=5.9nM) which was >140-fold less potent against MMP-1 (IC50=51,000nM), MMP-2 (IC50=1790nM), MMP-9 (IC50=840nM) and MMP-14 (IC50=1900nM).     

Apolactoferrin inhibits the catalytic domain of matrix metalloproteinase-2 by zinc chelation.

Lactoferrin (LTF) is a multifunctional iron-binding protein that is also capable of binding other divalent metal cations, especially Zn2+. Recent investigations indicate that lactoferrin levels are elevated in many disease conditions in which matrix metalloproteinases (MMPs), particularly MMP-2, are also elevated, suggesting that the 2 proteins may interact. This possibility was examined by determining the effect of LTF in its holo (metal-bound) and apo (metal-free) forms on the proteolytic activity of MMP-2 and other similar zinc metalloproteases. Pre-incubation with apolactoferrin, but not hololactoferrin, greatly reduced the hydrolysis of a peptide substrate by MMP-2, but not by MMP-1, -8, -9, or -13. This inhibition was specific for the 42 kDa catalytic domain fragment of MMP-2 lacking the hemopexin domain, since the 66 kDa form was poorly inhibited by apolactoferrin. The inhibition of the MMP-2 catalytic domain was strongly temperature sensitive, indicating that the conformation of one or both proteins is crucial to this interaction. To ascertain the mechanism of inhibition, increasing concentrations of ZnCl2 and FeCl2 were added to the reaction. While addition of Fe2+ did not reverse inhibition, the addition of Zn2+ resulted in a recovery of MMP-2 activity, and furthermore, zinc-saturated LTF did not inhibit MMP-2. Together, these data strongly suggest that apolactoferrin is capable of removing the catalytic zinc from the active site of MMP-2, although an exosite-based interaction between the 2 proteins cannot be fully ruled out. This inhibitory activity suggests a novel function for LTF and may represent a novel regulatory mechanism that regulates proteolysis by MMP-2 in vivo.     

Thermodynamic analysis of binding and protonation in DOTAP/DOPE (1:1): DNA complexes using isothermal titration calorimetry

A better understanding of the nature of the interaction between various cationic lipids used for gene delivery and DNA would lend insight into their structural and physical properties that may modulate their efficacy. We therefore separated the protonation and binding events which occur upon complexation of 1:1 DOTAP (1,2-dioleoyl-3-trimethylammonium propane):DOPE (1,2-dioleoylphosphatidylethanolamine) liposomes to DNA using proton linkage theory and isothermal titration calorimetry (ITC). The enthalpy of DOPE protonation was estimated as -45.0+/-0.7 kJ/mol and the intrinsic binding enthalpy of lipid to DNA as +2.8+/-0.3 kJ/mol. The pK(a) of DOPE was calculated to shift from 7.7+/-0.1 in the free state to 8.8+/-0.1 in the complex. At physiological ionic strength, proton linkage was not observed upon complex formation and the buffer-independent binding enthalpy was +1.0+/-0.4 kJ/mol. These studies indicate that the intrinsic interaction between 1:1 DOTAP/DOPE and DNA is an entropy-driven process and that the affinities of cationic lipids that are formulated with and without DOPE for DNA are controlled by the positive entropic changes that occur upon complex formation.     

Identification of collagen binding domain residues that govern catalytic activities of matrix metalloproteinase-2 (MMP-2)

An innovative approach to enhance the selectivity of matrix metalloproteinase (MMP) inhibitors comprises targeting these inhibitors to catalytically required substrate binding sites (exosites) that are located outside the catalytic cleft. In MMP-2, positioning of collagen substrate molecules occurs via a unique fibronectin-like domain (CBD) that contains three distinct modular collagen binding sites. To characterize the contributions of these exosites to gelatinolysis by MMP-2, seven MMP-2 variants were generated with single, or concurrent double and triple alanine substitutions in the three fibronectin type II modules of the CBD. Circular dichroism spectroscopy verified that recombinant MMP-2 wild-type (WT) and variants had the same fold. Moreover, the MMP-2 WT and variants had the same activity on a short FRET peptide substrate that is hydrolyzed independently of CBD binding. Among single-point variants, substitution in the module 3 binding site had greatest impact on the affinity of MMP-2 for gelatin. Simultaneous substitutions in two or three CBD modules further reduced gelatin binding. The rates of gelatinolysis of MMP-2 variants were reduced by 20–40% following single-point substitutions, by 60–75% after double-point modifications, and by > 90% for triple-point variants. Intriguingly, the three CBD modules contributed differentially to cleavage of dissociated α-1(I) and α-2(I) collagen chains. Importantly, kinetic analyses (k_cat/K_m) revealed that catalysis of a triple-helical FRET peptide substrate by MMP-2 relied primarily on the module 3 binding site. Thus, we have identified three collagen binding site residues that are essential for gelatinolysis and constitute promising targets for selective inhibition of MMP-2.     

Optimizing isothermal titration calorimetry protocols for the study of 1:1 binding: Keeping it simple

BackgroundSuccessful ITC experiments require conversion of cell reagent (titrand M) to product and production or consumption of heat. These conditions are quantified for 1:1 binding, M + X ⇔ MX.MethodsNonlinear least squares is used in error-propagation mode to predict the precisions with which the key quantities — binding constant K, reaction enthalpy ΔH°, and stoichiometry number n — can be estimated over a wide range of the dimensionless quantity that governs isotherm shape, c = K[M]₀. The measurement precision σ_q is estimated from analysis of water–water blanks.ResultsWhen the product conversion exceeds 90%, the parameter relative standard errors are proportional to σ_q/q_tot, where the total heat q_tot ≈ ΔH° [M]₀ V₀. Specifically, σ_K/K × q_tot/σ_q ≈ 25 for c = 10 ^− 3 − 10, ≈ 11 c^1/3 for c = 10 − 10⁴. For c > 1, n and ΔH° are more precise than K; this holds also at smaller c for the product n × ΔH° and for ΔH° when n can be held fixed. Use of as few as 10 titrant injections can outperform the customary 20–40 while also improving productivity.ConclusionThese principles are illustrated in experiment design using the program ITC-PLANNER15.General significanceSimple quantitative guidelines replace the “c rules” that have dominated the literature for decades. This article is part of a Special Issue entitled Microcalorimetry in the BioSciences — Principles and Applications, edited by Fadi Bou-Abdallah.     

Crystal structure of the catalytic domain of matrix metalloproteinase-1 in complex with the inhibitory domain of tissue inhibitor of metalloproteinase-1

The mammalian collagenases are a subgroup of the matrix metalloproteinases (MMPs) that are uniquely able to cleave triple helical fibrillar collagens. Collagen breakdown is an essential part of extracellular matrix turnover in key physiological processes including morphogenesis and wound healing; however, unregulated collagenolysis is linked to important diseases such as arthritis and cancer. The tissue inhibitors of metalloproteinases (TIMPs) function in controlling the activity of MMPs, including collagenases. We report here the structure of a complex of the catalytic domain of fibroblast collagenase (MMP-1) with the N-terminal inhibitory domain of human TIMP-1 (N-TIMP-1) at 2.54 A resolution. Comparison with the previously reported structure of the TIMP-1/stromelysin-1 (MMP-3) complex shows that the mechanisms of inhibition of both MMPs are generally similar, yet there are significant differences in the protein-protein interfaces in the two complexes. Specifically, the loop between beta-strands A and B of TIMP-1 makes contact with MMP-3 but not with MMP-1, and there are marked differences in the roles of individual residues in the C-D connector of TIMP-1 in binding to the two MMPs. Structural rearrangements in the bound MMPs are also strikingly different. This is the first crystallographic structure that contains the truncated N-terminal domain of a TIMP, which shows only minor differences from the corresponding region of the full-length protein. Differences in the interactions in the two TIMP-1 complexes provide a structural explanation for the results of previous mutational studies and a basis for designing new N-TIMP-1 variants with restricted specificity.