Crystal structure of the terminal oxygenase component of cumene dioxygenase from Pseudomonas fluorescens IP01

The crystal structure of the terminal component of the cumene dioxygenase multicomponent enzyme system of Pseudomonas fluorescens IP01 (CumDO) was determined at a resolution of 2.2 A by means of molecular replacement by using the crystal structure of the terminal oxygenase component of naphthalene dioxygenase from Pseudomonas sp. strain NCIB 9816-4 (NphDO). The ligation of the two catalytic centers of CumDO (i.e., the nonheme iron and Rieske [2Fe-2S] centers) and the bridging between them in neighboring catalytic subunits by hydrogen bonds through a single amino acid residue, Asp231, are similar to those of NphDO. An unidentified external ligand, possibly dioxygen, was bound at the active site nonheme iron. The entrance to the active site of CumDO is different from the entrance to the active site of NphDO, as the two loops forming the lid exhibit great deviation. On the basis of the complex structure of NphDO, a biphenyl substrate was modeled in the substrate-binding pocket of CumDO. The residues surrounding the modeled biphenyl molecule include residues that have already been shown to be important for its substrate specificity by a number of engineering studies of biphenyl dioxygenases.     

The crystal structure of Bacillus subtilis lipase: a minimal alpha/beta hydrolase fold enzyme

The X-ray structure of the lipase LipA from Bacillus subtilis has been determined at 1.5 A resolution. It is the first structure of a member of homology family 1.4 of bacterial lipases. The lipase shows a compact minimal alpha/beta hydrolase fold with a six-stranded parallel beta-sheet flanked by five alpha-helices, two on one side of the sheet and three on the other side. The catalytic triad residues, Ser77, Asp133 and His156, and the residues forming the oxyanion hole (backbone amide groups of Ile12 and Met78) are in positions very similar to those of other lipases of known structure. However, no lid domain is present and the active-site nucleophile Ser77 is solvent-exposed. A model of substrate binding is proposed on the basis of a comparison with other lipases with a covalently bound tetrahedral intermediate mimic. It explains the preference of the enzyme for substrates with C8 fatty acid chains.     

Identification and analysis of a new family of bacterial serine proteinases

A family of hypothetical proteins, identified predominantly from archaeal genomes, has been analyzed in order to understand its functional characteristics. Using extensive sequence similarity searches it is inferred that this family is remotely related (best sequence identity is 19%) to ClpP proteinases that belongs to serine proteinase class. This family of hypothetical proteins is referred to as SDH proteinase family based on conserved sequential order of Ser, Asp and His residues and predicted serine proteinase activity. Results of fold recognition of SDH family sequences confirmed the remote relationship between SDH proteinases and Clp proteinases and revealed similar tertiary location of putative catalytic triad residues critical for serine proteinase function. However, the best sequence alignment we could obtain suggests that while catalytic Ser is conserved across Clp and SDH proteinases the location of the other catalytic triad residues, namely, His and Asp are swapped in their amino acid alignment positions and hence in 3-D structure. The evidence of conserved catalytic triad suggests that SDH could be a new family of serine proteinases with the fold of Clp proteinase, however sharing the catalytic triad order of carboxypeptidase clan. Signal peptide sequence identified at the N-terminus of some of the homologues suggests that these might be secretory serine proteinases involved in cleavage of extracellular proteins while the remote homologues, ClpP proteinases, are known to work in intracellular environment.     

Consequences of breaking the Asp-His hydrogen bond of the catalytic triad: effects on the structure and dynamics of the serine esterase cutinase.

The objective of this study has been to investigate the effects on the structure and dynamics that take place with the breaking of the Asp-His hydrogen bond in the catalytic triad Asp175-His188-Ser120 of the serine esterase cutinase in the ground state. Four molecular dynamics simulations were performed on this enzyme in solution. The starting structures in two simulations had the Asp175-His188 hydrogen bond intact, and in two simulations the Asp175-His188 hydrogen bond was broken. Conformations of the residues comprising the catalytic triad are well behaved during both simulations containing the intact Asp175-His188 hydrogen bond. Short contacts of less than 2.6 A were observed in 1.2% of the sampled distances between the carboxylate oxygens of Asp175 and the NE2 of His188. The simulations showed that the active site residues exhibit a great deal of mobility when the Asp175-His188 hydrogen bond is broken. In the two simulations in which the Asp175-His188 hydrogen bond is not present, the final geometries for the residues in the catalytic triad are not in catalytically productive conformations. In both simulations, Asp175 and His188 are more than 6 A apart in the final structure from dynamics, and the side chains of Ser120 and Asp175 are in closer proximity to the NE2 of His188 than to ND1. Nonlocal effects on the structure of cutinase were observed. A loop formed by residues 26-31, which is on the opposite end of the protein relative to the active site, was greatly affected. Further changes in the dynamics of cutinase were determined from quasiharmonic mode analysis. The frequency of the second lowest mode was greatly reduced when the Asp175-His188 hydrogen bond was broken, and several higher modes showed lower frequencies. All four simulations showed that the oxyanion hole, composed of residues Ser42 and Gln121, is stable. Only one of the hydrogen bonds (Ser42 OG to Gln121 NE2) observed in the crystal structure that stabilize the conformation of Ser42 OG persisted throughout the simulations. This hydrogen bond appears to be enough for the oxyanion hole to retain its structural integrity.     

Functional topology of a surface loop shielding the catalytic center in lipoprotein lipase.

Lipoprotein lipase (LPL), hepatic lipase, and pancreatic lipase show high sequence homology to one another. The crystal structure of pancreatic lipase suggests that it contains a trypsin-like Asp-His-Ser catalytic triad at the active center, which is shielded by a disulfide bridge-bounded surface loop that must be repositioned before the substrate can gain access to the catalytic residues. By sequence alignment, the homologous catalytic triad in LPL corresponds to Asp156-His241-Ser132, absolutely conserved residues, and the homologous surface loop to residues 217-238, a poorly conserved region. To verify these assignments, we expressed in vitro wild-type LPL and mutant LPLs having single amino acid mutations involving residue Asp156 (to His, Ser, Asn, Ala, Glu, or Gly), His241 (to Asn, Ala, Arg, Gln, or Trp), or Ser132 (to Gly, Ala, Thu, or Asp) individually. All 15 mutant LPLs were totally devoid of enzyme activity, while wild-type LPL and other mutant LPLs containing substitutions in other positions were fully active. We further replaced the 22-residue LPL loop which shields the catalytic center either partially (replacing 6 of 22 residues) or completely with the corresponding hepatic lipase loop. The partial loop-replacement chimeric LPL was found to be fully active, and the complete loop-replacement mutant had approximately 60% activity, although the primary sequence of the hepatic lipase loop is quite different. In contrast, replacement with the pancreatic lipase loop completely inactivated the enzyme. Our results are consistent with Asp156-His241-Ser132 being the catalytic triad in lipoprotein lipase.(ABSTRACT TRUNCATED AT 250 WORDS)     

Carboxyl proteinase from Pseudomonas defines a novel family of subtilisin-like enzymes

The crystal structure of a pepstatin-insensitive carboxyl proteinase from Pseudomonas sp. 101 (PSCP) has been solved by single-wavelength anomalous diffraction using the absorption peak of bromide anions. Structures of the uninhibited enzyme and of complexes with an inhibitor that was either covalently or noncovalently bound were refined at 1.0-1.4 A resolution. The structure of PSCP comprises a single compact domain with a diameter of approximately 55 A, consisting of a seven-stranded parallel beta-sheet flanked on both sides by a number of helices. The fold of PSCP is a superset of the subtilisin fold, and the covalently bound inhibitor is linked to the enzyme through a serine residue. Thus, the structure of PSCP defines a novel family of serine-carboxyl proteinases (defined as MEROPS S53) with a unique catalytic triad consisting of Glu 80, Asp 84 and Ser 287.     

A conserved hydrogen-bond network in the catalytic centre of animal glutaminyl cyclases is critical for catalysis

QCs (glutaminyl cyclases; glutaminyl-peptide cyclotransferases, EC 2.3.2.5) catalyse N-terminal pyroglutamate formation in numerous bioactive peptides and proteins. The enzymes were reported to be involved in several pathological conditions such as amyloidotic disease, osteoporosis, rheumatoid arthritis and melanoma. The crystal structure of human QC revealed an unusual H-bond (hydrogen-bond) network in the active site, formed by several highly conserved residues (Ser(160), Glu(201), Asp(248), Asp(305) and His(319)), within which Glu(201) and Asp(248) were found to bind to substrate. In the present study we combined steady-state enzyme kinetic and X-ray structural analyses of 11 single-mutation human QCs to investigate the roles of the H-bond network in catalysis. Our results showed that disrupting one or both of the central H-bonds, i.e., Glu(201)...Asp(305) and Asp(248)...Asp(305), reduced the steady-state catalysis dramatically. The roles of these two COOH...COOH bonds on catalysis could be partly replaced by COOH...water bonds, but not by COOH...CONH(2) bonds, reminiscent of the low-barrier Asp...Asp H-bond in the active site of pepsin-like aspartic peptidases. Mutations on Asp(305), a residue located at the centre of the H-bond network, raised the K(m) value of the enzyme by 4.4-19-fold, but decreased the k(cat) value by 79-2842-fold, indicating that Asp(305) primarily plays a catalytic role. In addition, results from mutational studies on Ser(160) and His(319) suggest that these two residues might help to stabilize the conformations of Asp(248) and Asp(305) respectively. These data allow us to propose an essential proton transfer between Glu(201), Asp(305) and Asp(248) during the catalysis by animal QCs.     

Crystal structure of bovine duodenase, a serine protease, with dual trypsin and chymotrypsin-like specificities

The three-dimensional structure of duodenase, a serine protease from bovine duodenum mucosa, has been determined at 2.4A resolution. The enzyme, which has both trypsin-like and chymotrypsin-like activities, most closely resembles human cathepsin G with which it shares 57% sequence identity and similar specificity. The catalytic Ser195 in duodenase adopts the energetically favored conformation typical of serine proteinases and unlike the strained state typical of lipase/esterases. Of several waters in the active site of duodenase, the one associated with Ser214 is found in all serine proteinases and most lipase/esterases. The conservation of the Ser214 residue in serine proteinase, its presence in the active site, and participation in a hydrogen water network involving the catalytic triad (His57, Asp107, and Ser195) argues for its having an important role in the mechanism of action. It may be referred to as a fourth member of the catalytic triad. Duodenase is one of a growing family of enzymes that possesses trypsin-like and chymotrypsin-like activity. Not long ago, these activities were considered to be mutually exclusive. Computer modeling reveals that the S1 subsite of duodenase has structural features compatible with effective accommodation of P1 residues typical of trypsin (Arg/Lys) and chymotrypsin (Tyr/Phe) substrates. The determination of structural features associated with functional variation in the enzyme family may permit design of enzymes with a specific ratio of trypsin and chymotrypsin activities.     

Covalent reaction intermediate revealed in crystal structure of the Geobacillus stearothermophilus carboxylesterase Est30

Est30 is a thermophilic carboxylesterase cloned from Geobacillus stearothermophilus that showed optimal hydrolysis of esters with short acyl chains at 70 degrees C. Est30 is a member of a new family of carboxylesterases with representatives in other Gram-positive bacteria. The crystal structure has been determined at 1.63A resolution using multiple anomalous dispersion data. The two-domain crystal structure showed a large domain with a modified alpha/beta hydrolase core including a seven, rather than an eight-stranded beta sheet, and a smaller cap domain comprising three alpha helices. The catalytic triad consists of residues Ser94, Asp193, and His223. A 100Da tetrahedral ligand was observed to be covalently bound to the side-chain of Ser94. The propyl acetate ligand represents the first tetrahedral intermediate in the reaction mechanism. Therefore, this Est30 crystal structure will help understand the mode of action of all enzymes in the serine hydrolase superfamily.     

Atomic resolution analysis of the catalytic site of an aspartic proteinase and an unexpected mode of binding by short peptides

The X-ray structures of native endothiapepsin and a complex with a hydroxyethylene transition state analog inhibitor (H261) have been determined at atomic resolution. Unrestrained refinement of the carboxyl groups of the enzyme by using the atomic resolution data indicates that both catalytic aspartates in the native enzyme share a single negative charge equally; that is, in the crystal, one half of the active sites have Asp 32 ionized and the other half have Asp 215 ionized. The electron density map of the native enzyme refined at 0.9 A resolution demonstrates that there is a short peptide (probably Ser-Thr) bound noncovalently in the active site cleft. The N-terminal nitrogen of the dipeptide interacts with the aspartate diad of the enzyme by hydrogen bonds involving the carboxyl of Asp 215 and the catalytic water molecule. This is consistent with classical findings that the aspartic proteinases can be inhibited weakly by short peptides and that these enzymes can catalyze transpeptidation reactions. The dipeptide may originate from autolysis of the N-terminal Ser-Thr sequence of the enzyme during crystallization.     

Structure of human pro-chymase: a model for the activating transition of granule-associated proteases

Human chymase is a protease involved in physiological processes ranging from inflammation to hypertension. As are all proteases of the trypsin fold, chymase is synthesized as an inactive "zymogen" with an N-terminal pro region that prevents the transition of the zymogen to an activated conformation. The 1.8 A structure of pro-chymase, reported here, is the first zymogen with a dipeptide pro region (glycine-glutamate) to be characterized at atomic resolution. Three segments of the pro-chymase structure differ from that of the activated enzyme: the N-terminus (Gly14-Gly19), the autolysis loop (Gly142-Thr154), and the 180s loop (Pro185A-Asp194). The four N-terminal residues (Gly14-Glu15-Ile16-Ile17) are disordered. The autolysis loop occupies a position up to 10 A closer to the active site than is seen in the activated enzyme, thereby forming a hydrogen bond with the catalytic residue Ser195 and occluding the S1' binding pocket. Nevertheless, the catalytic triad (Asp102-His57-Ser195) is arrayed in a geometry close to that seen in activated chymase (all atom rmsd of 0.52 A). The 180s loop of pro-chymase is, on average, 4 A removed from its conformation in the activated enzyme. This conformation disconnects the oxyanion hole (the amides of Gly193 and Ser195) from the active site and positions only approximately 35% of the S1-S3 binding pockets in the active conformation. The backbone of residue Asp194 is rotated 180 degrees when compared to its conformation in the activated enzyme, allowing a hydrogen bond between the main-chain amide of residue Trp141 and the carboxylate of Asp194. The side chains of residues Phe191 and Lys192 of pro-chymase fill the Ile16 binding pocket and the base of the S1 binding pocket, respectively. The zymogen positioning of both the 180s and autolysis loops are synergistic structural elements that appear to prevent premature proteolysis by chymase and, quite possibly, by other dipeptide zymogens.     

用定位突变方法对人脑己糖激酶活性位点的研究

哺乳动物己糖激酶Ⅰ的分子量是１００ｋＤ．目前已经认为是由分子量５０ｋＤ酵母型己糖激酶通过基因复制和融合进化来的．己糖激酶Ⅰ的Ｃ端半分子包含了底物葡萄糖的结合位点即催化位点．Ｘ射线衍射结构的结果已经推测在酵母型的己糖激酶分子中Ｓｅｒ－１５８、Ａｓｐ－２１１是和葡萄糖的结合及催化活性有关,这些氨基酸残基相当于人脑己糖激酶Ⅰ分子中的Ｓｅｒ－６０３、Ａｓｐ－６５７,它们正好位于该酶分子的Ｃ端半分子中．定位突变这两个氨基酸残基得到４个该酶的Ｃ端半分子酶（ｍｉｎｉ－ＨＫⅠ）的突变体,它们是Ｓｅｒ－６０３→Ｃｙｓ,Ｓｅｒ－６０３→Ｔｈｒ,Ａｓｐ－６７５→Ｇｌｕ,Ａｓｐ－６７５→Ｖａｌ．实验结果指出４个突变体酶的Ｋｍ值变化不大,但酶活性只保留野生型酶的０．２８％～１１％,园二色谱分析４个突变体的ＣＤ谱与野生型酶基本一致,因此说明二级结构没有变化．这些研究结果和Ｘ射线衍射结构的推断是一致的,显示了Ｓｅｒ－６０３和Ａｓｐ－６５７氨基酸残基在该酶结合底物葡萄糖或催化作用上起了重要的作用．     

Insights into the catalytic roles of the polypeptide regions in the active site of thermolysin and generation of the thermolysin variants with high activity and stability

The active site of thermolysin is composed of one zinc ion and five polypeptide regions [N-terminal sheet (Asn112-Trp115), alpha-helix 1 (Val139-Thr149), C-terminal loop 1 (Asp150-Gly162), alpha-helix 2 (Ala163-Val176) and C-terminal loop 2 (Gln225-Ser234)]. To explore their catalytic roles, we introduced single amino-acid substitutions into these regions by site-directed mutagenesis and examined their effects on the activity and stability. Seventy variants, in which one of the twelve residues (Ala113, Phe114, Trp115, Asp150, Tyr157, Gly162, Ile168, Ser169, Asp170, Asn227, Val230 and Ser234) was replaced, were produced in Escherichia coli. The hydrolytic activities of thermolysin for N-[3-(2-furyl)acryloyl]-Gly-l-Leu amide (FAGLA) and casein revealed that the N-terminal sheet and alpha-helix 2 were critical in catalysis and the C-terminal loops 1 and 2 were in substrate recognition. Twelve variants were active for both substrates. In the hydrolysis of FAGLA and N-carbobenzoxy-L-Asp-L-Phe methyl ester, the k(cat)/K(m) values of the D150E (in which Asp150 is replaced with Glu) and I168A variants were 2-3 times higher than those of the wild-type (WT) enzyme. Thermal inactivation of thermolysin at 80 degrees C was greatly suppressed with the D150H, D150W, I168A, I168H, N227A, N227H and S234A. The evidence might provide the insights into the activation and stabilization of thermolysin.     

Crystal structure of pseudomonas aeruginosa lipase in the open conformation. The prototype for family I.1 of bacterial lipases

The x-ray structure of the lipase from Pseudomonas aeruginosa PAO1 has been determined at 2.54 A resolution. It is the first structure of a member of homology family I.1 of bacterial lipases. The structure shows a variant of the alpha/beta hydrolase fold, with Ser(82), Asp(229), and His(251) as the catalytic triad residues. Compared with the "canonical" alpha/beta hydrolase fold, the first two beta-strands and one alpha-helix (alphaE) are not present. The absence of helix alphaE allows the formation of a stabilizing intramolecular disulfide bridge. The loop containing His(251) is stabilized by an octahedrally coordinated calcium ion. On top of the active site a lid subdomain is in an open conformation, making the catalytic cleft accessible from the solvent region. A triacylglycerol analogue is covalently bound to Ser(82) in the active site, demonstrating the position of the oxyanion hole and of the three pockets that accommodate the sn-1, sn-2, and sn-3 fatty acid chains. The inhibited enzyme can be thought to mimic the structure of the tetrahedral intermediate that occurs during the acylation step of the reaction. Analysis of the binding mode of the inhibitor suggests that the size of the acyl pocket and the size and interactions of the sn-2 binding pocket are the predominant determinants of the regio- and enantio-preference of the enzyme.     

Crystal structure of guanidinoacetate methyltransferase from rat liver: a model structure of protein arginine methyltransferase

Guanidinoacetate methyltransferase (GAMT) is the enzyme that catalyzes the last step of creatine biosynthesis. The enzyme is found in abundance in the livers of all vertebrates. Recombinant rat liver GAMT has been crystallized with S-adenosylhomocysteine (SAH), and the crystal structure has been determined at 2.5 A resolution. The 36 amino acid residues at the N terminus were cleaved during the purification and the truncated enzyme was crystallized. The truncated enzyme forms a dimer, and each subunit contains one SAH molecule in the active site. Arg220 of the partner subunit forms a pair of hydrogen bonds with Asp134 at the guanidinoacetate-binding site. On the basis of the crystal structure, site-directed mutagenesis on Asp134, and chemical modification and limited proteolysis studies, we propose a catalytic mechanism of this enzyme. The truncated GAMT dimer structure can be seen as a ternary complex of protein arginine methyltransferase (one subunit) complexed with a protein substrate (the partner subunit) and the product SAH. Therefore, this structure provides insight into the structure and catalysis of protein arginine methyltransferases.     

Crystal structure of exo-inulinase from Aspergillus awamori: the enzyme fold and structural determinants of substrate recognition

Exo-inulinases hydrolyze terminal, non-reducing 2,1-linked and 2,6-linked beta-d-fructofuranose residues in inulin, levan and sucrose releasing beta-d-fructose. We present the X-ray structure at 1.55A resolution of exo-inulinase from Aspergillus awamori, a member of glycoside hydrolase family 32, solved by single isomorphous replacement with the anomalous scattering method using the heavy-atom sites derived from a quick cryo-soaking technique. The tertiary structure of this enzyme folds into two domains: the N-terminal catalytic domain of an unusual five-bladed beta-propeller fold and the C-terminal domain folded into a beta-sandwich-like structure. Its structural architecture is very similar to that of another member of glycoside hydrolase family 32, invertase (beta-fructosidase) from Thermotoga maritima, determined recently by X-ray crystallography The exo-inulinase is a glycoprotein containing five N-linked oligosaccharides. Two crystal forms obtained under similar crystallization conditions differ by the degree of protein glycosylation. The X-ray structure of the enzyme:fructose complex, at a resolution of 1.87A, reveals two catalytically important residues: Asp41 and Glu241, a nucleophile and a catalytic acid/base, respectively. The distance between the side-chains of these residues is consistent with a double displacement mechanism of reaction. Asp189, which is part of the Arg-Asp-Pro motif, provides hydrogen bonds important for substrate recognition.     

Crystal structures of the psychrophilic alpha-amylase from Alteromonas haloplanctis in its native form and complexed with an inhibitor.

Alteromonas haloplanctis is a bacterium that flourishes in Antarctic sea-water and it is considered as an extreme psychrophile. We have determined the crystal structures of the alpha-amylase (AHA) secreted by this bacterium, in its native state to 2.0 angstroms resolution as well as in complex with Tris to 1.85 angstroms resolution. The structure of AHA, which is the first experimentally determined three-dimensional structure of a psychrophilic enzyme, resembles those of other known alpha-amylases of various origins with a surprisingly greatest similarity to mammalian alpha-amylases. AHA contains a chloride ion which activates the hydrolytic cleavage of substrate alpha-1,4-glycosidic bonds. The chloride binding site is situated approximately 5 angstroms from the active site which is characterized by a triad of acid residues (Asp 174, Glu 200, Asp 264). These are all involved in firm binding of the Tris moiety. A reaction mechanism for substrate hydrolysis is proposed on the basis of the Tris inhibitor binding and the chloride activation. A trio of residues (Ser 303, His 337, Glu 19) having a striking spatial resemblance with serine-protease like catalytic triads was found approximately 22 angstroms from the active site. We found that this triad is equally present in other chloride dependent alpha-amylases, and suggest that it could be responsible for autoproteolytic events observed in solution for this cold adapted alpha-amylase.     

Multiple conformations of catalytic serine and histidine in acetylxylan esterase at 0.90 A

Acetylxylan esterase (AXEII; 207 amino acids) from Penicillium purpurogenum has substrate specificities toward acetate esters of d-xylopyranose residues in xylan and belongs to a new class of alpha/beta hydrolases. The crystal structure of AXEII has been determined by single isomorphous replacement and anomalous scattering, and refined at 0.90- and 1.10-A resolutions with data collected at 85 K and 295 K, respectively. The tertiary structure consists of a doubly wound alpha/beta sandwich, having a central six-stranded parallel beta-sheet flanked by two parallel alpha-helices on each side. The catalytic residues Ser(90), His(187), and Asp(175) are located at the C-terminal end of the sheet, an exposed region of the molecule. The serine and histidine side chains in the 295 K structure show the frequently observed conformations in which Ser(90) is trans and the hydroxyl group is in the plane of the imidazole ring of His(187). However, the structure at 85 K displays an additional conformation in which Ser(90) side-chain hydroxyl is away from the plane of the imidazole ring of His(187). The His(187) side chain forms a hydrogen bond with a sulfate ion and adopts an altered conformation. The only other known hydrolase that has a similar tertiary structure is Fusarium solani cutinase. The exposed nature of the catalytic triad suggests that AXEII is a pure esterase, i.e. an alpha/beta hydrolase with specificity for nonlipidic polar substrates.     

Structure-function relationships in Escherichia coli adenylate cyclase

Class I adenylate cyclases are found in gamma- and delta-proteobacteria. They play central roles in processes such as catabolite repression in Escherichia coli or development of full virulence in pathogens such as Yersinia enterocolitica and Vibrio vulnificus. The catalytic domain (residues 2-446) of the adenylate cyclase of E. coli was overexpressed and purified. It displayed a V(max) of 665 nmol of cAMP x mg(-1) x min(-1) and a K(m) of 270 microM. Titration of the metal cofactor Mg(2+) against the substrate ATP showed a requirement for free metal ions in addition to the MgATP complex, suggesting a two-metal-ion mechanism as is known for class II and class III adenylate cyclases. Twelve residues which are essential for catalysis were identified by mutagenesis of a total of 20 polar residues conserved in all class I adenylate cyclases. Five essential residues (Ser(103), Ser(113), Asp(114), Asp(116) and Trp(118)) were part of a region which is found in all members of the large DNA polymerase beta-like nucleotidyltransferase superfamily. Alignment of the E. coli adenylate cyclase with the crystal structure of a distant member of the superfamily, archaeal tRNA CCA-adding enzyme, suggested that Asp(114) and Asp(116) are the metal-cofactor-ion-binding residues. The S103A mutant had a 17-fold higher K(m) than wild-type, demonstrating its important role in substrate binding. In comparison with the tRNA CCA-adding enzyme, Ser(103) of the E. coli adenylate cyclase apparently binds the gamma-phosphate group of ATP. Consistent with this function, the S103A mutation caused a marked reduction of discrimination between ATP- and ADP- or AMP-derived inhibitors.     

Three-dimensional structure of proteinase K at 0.15-nm resolution

The crystal and molecular structure of proteinase K was determined by X-ray diffraction data to 0.15-nm resolution. The enzyme belongs to the subtilisin family with an active-site catalytic triad Asp39--His69--Ser224 but is a representative of a subgroup with a free Cys73 close to and 'below' the active His69. Besides this Cys72, proteinase K has two disulfide bonds, Cys34--Cys123 and Cys178--Cys249, which contribute to the stability of the tertiary structure consisting of an extended central parallel beta-sheet decorated by six alpha-helices, three short antiparallel beta-sheets, 18 beta-turns and involving several internal, structurally important water molecules. Proteinase K exhibits two Ca2+-binding sites, one very strong and the other weak, which were the sites of the heavy atoms (Pb2+, Sm3+) used to solve the crystal structure. The weak binding site is liganded to the N and C termini, Thr16 and Asp260, and is only incompletely coordinated by oxygen ligands. The strong binding site is coordinated in the form of a pentagonal bipyramid with the side chain carboxylate of Asp200 and the C = O of Pro175 as apex, and C = O of Val177 and four water molecules in the equatorial plane. Upon removal of this Ca2+, proteinase K loses activity which is interpreted in terms of a local structural deformation involving the substrate-recognition site (Ser132--Gly136), probably associated with a cis----trans isomerization of cis Pro171. Several water molecules are located in the active site. One, W335, is positioned in the 'oxyanion hole' and is displaced by the C = O of the scissile peptide bond of the substrate, as indicated by crystallographic studies with peptide chloromethane inhibitors. Based on these experiments, a reaction mechanism is proposed where the peptide substrate forms a three-stranded antiparallel pleated sheet with the recognition site of proteinase K consisting of Ser132--Leu133--Gly134 on one side and Gly100--Ser101 on the other, followed by expulsion of the oxyanion hole water W335 and hydrolytic cleavage by the Asp39--His69--Serr224 triad. These latter residues display low thermal motion corresponding to well-defined geometry and are hardly accessible to solvent molecules, whereas the recognition-site amino acids are more flexible and partially exposed to solvent.