Adsorption and hydrolysis reactions of poly(hydroxybutyric acid) depolymerases secreted from Ralstonia pickettii T1 and Penicillium funiculosum onto poly[(R)-3-hydroxybutyric acid

Reaction processes of poly[(R)-3-hydroxybutyric acid] (P(3HB)) with two types of poly(hydroxybutyric acid) (PHB) depolymerases secreted from Ralstonia pickettii T1 and Penicillium funiculosum were characterized by means of atomic force microscopy (AFM) and quartz crystal microbalance (QCM). The PHB depolymerase from R. pickettii T1 consists of catalytic, linker, and substrate-binding domains, whereas the one from P. funiculosum lacks a substrate-binding domain. We succeeded in observing the adsorption of single molecules of the PHB depolymerase from R. pickettii T1 onto P(3HB) single crystals and the degradation of the single crystals in a phosphate buffer solution at 37 degrees C by real-time AFM. On the contrary, the enzyme molecule from P. funiculosum was hardly observed at the surface of P(3HB) single crystals by real-time AFM, even though the enzymatic degradation of the single crystals was surely progressed. On the basis of the AFM observations in air of the P(3HB) single crystals after the enzymatic treatments, however, not only the PHB depolymerase from R. pickettii T1 but also that from P. funiculosum adsorbed onto the surface of P(3HB) crystals, and both concentrations of the enzymes on the surface were nearly identical. This means both enzymes were adsorbed onto the surface of P(3HB) single crystals. Moreover, QCM measurements clarified quantitatively the differences in detachment behavior between two types of PHB depolymerases, namely the enzyme from R. pickettii T1 was hardly detached but the enzyme from P. funiculosum was released easily from the surface of P(3HB) crystals under an aqueous condition.     

Enzymatic degradation processes of lamellar crystals in thin films for poly[(R)-3-hydroxybutyric acid] and its copolymers revealed by real-time atomic force microscopy

Enzymatic degradation processes of flat-on lamellar crystals in melt-crystallized thin films of poly[(R)-3-hydroxybutyric acid] (P(3HB)) and its copolymers were characterized by real-time atomic force microscopy (AFM) in a phosphate buffer solution containing PHB depolymerase from Ralstonia pickettii T1. Fiberlike crystals with regular intervals were generated along the crystallographic a axis at the end of lamellar crystals during the enzymatic degradation. The morphologies and sizes of the fiberlike crystals were markedly dependent on the compositions of comonomer units in the polyesters. Length, width, interval, and thickness of the fiberlike crystals after the enzymatic degradation for 2 h were measured by AFM, and the dimensions were related to the solid-state structures of P(3HB) and its copolymers. The width and thickness decreased at the tip of fiberlike crystals, indicating that the enzymatic degradation of crystals takes place not only along the a axis but also along the b and c axes. These results from AFM measurement were compared with the data on crystal size by wide-angle X-ray diffraction, and on lamellar thickness and long period by small-angle X-ray scattering. In addition, the enzymatic erosion rate of flat-on lamellar crystals along the a axis was measured from real-time AFM height images. A schematic glacier model for the enzymatic degradation of flat-on lamellar crystals of P(3HB) by PHB depolymerase has been proposed on the basis of the AFM observations.     

Structure and enzymatic degradation of poly(3-hydroxybutyrate) copolymer single crystals with an extracellular PHB depolymerase from Alcaligenes faecalis T1.

Lamellar single crystals of four random copolymers of (R)-3-hydroxybutyrate with different hydroxyalkanoates: poly(3-hydroxybutyrate-co-8 mol%-3-hydroxyvalerate) (P(3HB-co-8%-3HV)), poly(3-hydroxybutyrate-co-10 mol%-4-hydroxybutyrate) (P(3HB-co-10%-4HB)), poly(3-hydroxybutyrate-co-8 mol%-3-hydroxyhexanoate) (P(3HB-co-8%-3HH)) and poly(3-hydroxybutyrate-co-10 mol%-6-hydroxyhexanoate) (P(3HB-co-10%-6HH)), were grown from dilute solutions of chloroform and ethanol. All single crystals have lath-shaped morphology and the second monomer units seem to be excluded from the P(3HB) crystal, on the basis of the electron diffraction diagrams. The enzymatic degradation of P(3HB-co-8%-3HH) and P(3HB-co-10%-6HH) single crystals was investigated with an extracellular PHB depolymerase from Alcaligenes faecalis T1. Adsorption of an extracellular PHB depolymerase, examined using an immuno-gold labelling technique, demonstrated a homogeneous distribution of enzyme molecules with a low concentration on the crystal surfaces. Enzymatic degradation of single crystals progressed from the edges and ends of crystals to yield narrow cracks along their long axes and the small crystal fragments. Lamellar thicknesses of single crystals and molecular weights of copolymer chains remained unchanged during the enzymatic hydrolysis. The above results support the hypothesis that the hydrophobic adsorption of the enzyme contributes to increase the mobility of molecular chains of single crystals and generate the disordered chain-packing regions. The active-site of PHB depolymerase takes place preferentially at the disordered chain-packing regions of crystal edges and ends with endo-exo enzymatic hydrolysis behaviour, termed processive degradation.     

Enzymatic degradation processes of poly[(R)-3-hydroxybutyric acid] and poly[(R)-3-hydroxybutyric acid-co-(R)-3-hydroxyvaleric acid] single crystals revealed by atomic force microscopy: effects of molecular weight and second-monomer composition on erosion rates

Enzymatic degradation processes of poly[(R)-3-hydroxybutyric acid] (P(3HB)) and poly[(R)-3-hydroxybutyric acid-co-(R)-3-hydroxyvaleric acid] (P(3HB-co-3HV)) single crystals in the presence of PHB depolymerase from Ralstonia pickettii T1 were studied by real-time and static atomic force microscopy (AFM) observations. Fibril-like crystals were generated along the long axis of single crystals during the enzymatic degradation, and then the dimensions of fibril-like crystals were analyzed quantitatively. The morphologies and sizes of fibril-like crystals were dependent on the molecular weight and copolymer composition of polymers. For all samples, the crystalline thickness gradually decreased toward a tip from the root of a fibril-like crystal after enzymatic degradation for 1 h. The thinning of fibril-like crystals may be attributed to the destruction of chain-packing structure toward crystallographic c axis by the adsorption of enzyme. From the real-time AFM images, it was found that at the initial stage of degradation the enzymatic erosion started from the disordered chain-packing region in single crystals to form the grooves along the a axis. The generated fibril-like crystals deformed at a constant rate along the a axis with a constant rate after the induction time. The erosion rate at the grooves along the a axis increased with a decrease of molecular weight and with an increase of copolymer composition. On the other hand, the erosion rate along the a axis, at the tip of the fibril-like crystal, was dependent on only the copolymer composition, and the value increased with an increase in the copolymer composition. The morphologies and sizes of fibril-like crystals were governed by both the erosion rates along the a axis at the grooves and tip of fibril-like crystals. In addition, we were able to estimated the overall enzymatic erosion rate of single crystals by PHB depolymerase from the volumetric analysis.     

Biochemical and molecular characterization of the polyhydroxybutyrate depolymerase of Comamonas acidovorans YM1609, isolated from freshwater.

Comamonas acidovorans YM1609 secreted a polyhydroxybutyrate (PHB) depolymerase into the culture supernatant when it was cultivated on poly(3-hydroxybutyrate) [P(3HB)] or poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] as the sole carbon source. The PHB depolymerase was purified from culture supernatant of C. acidovorans by two chromatographic methods, and its molecular mass was determined as 45,000 Da by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate. The enzyme was stable at temperatures below 37 degrees C and at pH values of 6 to 10, and its activity was inhibited by diisopropyl fluorophosphonate. The liquid chromatography analysis of water-soluble products revealed that the primary product of enzymatic hydrolysis of P(3HB) was a dimer of 3-hydroxybutyric acid. Kinetics of enzymatic hydrolysis of P(3HB) film were studied. In addition, a gene encoding the PHB depolymerase was cloned from the C. acidovorans genomic library. The nucleotide sequence of this gene was found to encode a protein of 494 amino acids (M(r), 51,018 Da). Furthermore, by analysis of the N-terminal amino acid sequence of the purified enzyme, the molecular mass of the mature enzyme was calculated to be 48,628 Da. Analysis of the deduced amino acid sequence suggested a domain structure of the protein containing a catalytic domain, fibronectin type III module as linker, and a putative substrate-binding domain. Electron microscopic visualization of the mixture of P(3HB) single crystals and a fusion protein of putative substrate-binding domain with glutathione S-transferase demonstrated that the fusion protein adsorbed strongly and homogeneously to the surfaces of P(3HB) single crystals.     

Dynamic adsorption behavior of poly(3-hydroxybutyrate) depolymerase onto polyester surface investigated by QCM and AFM

Time-dependent adsorption behavior of poly(3-hydroxybutyrate) (PHB) depolymerase from Ralstonia pickettiiT1 on a polyester surface was studied by complementary techniques of quarts crystal microbalance (QCM) and atomic force microscopy (AFM). Amorphous poly(l-lactide) (PLLA) thin films were used as adsorption substrates. Effects of enzyme concentration on adsorption onto the PLLA surface were determined time-dependently by QCM. Adsorption of PHB depolymerase took place immediately after replacement of the buffer solutions with the enzyme solutions in the cell, followed by a gradual increase in the amount over 30 min. The amount of PHB depolymerase molecules adsorbed on the surface of amorphous PLLA thin films increased with an increase in the enzyme concentration. Time-dependent AFM observation of enzyme molecules was performed during the adsorption of PHB depolymerase. The phase response of the AFM signal revealed that the nature of the PLLA surface around the PHB depolymerase molecule was changed due to the adsorption function of the enzyme and that PHB depolymerase adsorbed onto the PLLA surface as a monolayer at a lower enzyme concentration. The number of PHB depolymerase molecules on the PLLA surface depended on the enzyme concentration and adsorption time. In addition, the height of the adsorbed enzyme was found to increase with time when the PLLA surface was crowded with the enzymes. In the case of higher enzyme concentrations, multilayered PHB depolymerases were observed on the PLLA thin film. These QCM and AFM results indicate that two-step adsorption of PHB depolymerase occurs on the amorphous PLLA thin film. First, adsorption of PHB depolymerase molecules takes place through the characteristic interaction between the binding domain of PHB depolymerase and the free surface of an amorphous PLLA thin film. As the adsorption proceeded, the surface region of the thin film was almost covered with the enzyme, which was accompanied by morphological changes. Second, the hydrophobic interactions among the enzymes in the adlayer and the solution become more dominant to stack as a second layer.     

Structural effects on enzymatic degradabilities for poly[(R)-3-hydroxybutyric acid] and its copolymers.

Poly[(R)-3-hydroxybutyric acid] and its copolymers were prepared by biosynthetic and chemosynthetic methods. The films of polyesters were prepared by both the solution-cast and melt-crystallized techniques. The enzymatic degradation of polyester films was carried out at 37 degrees C in an aqueous solution (pH 7.4) of PHB depolymerase from Alcaligenes faecalis. The rate of enzymatic erosion on the solution-cast films increased markedly with an increase in the fraction of second monomer units up to 10-20 mol% to reach a maximum value followed by a decrease in the erosion rate. Analysis of the water-soluble products liberated during the enzymatic degradation of polyester films showed the formation of a mixture of monomers and oligomers of (R)-3HB and hydroxyalkanoic acids units, suggesting that the active site of PHB depolymerase recognizes at least three monomeric units as substrate for the hydrolysis of ester bonds in a polymer chain. The rate of enzymatic erosion of melt-crystallized polyester films decreased with an increase in crystallinity. PHB depolymerase predominantly hydrolyzed the polymer chains in the amorphous phase and subsequently eroded crystalline phase. In addition, the enzymatic degradation of crystalline phase by PHB depolymerase progressed from the edges of crystalline lamellar stacks. The enzymatic erosion rate of crystalline phase in polyester films decreased with an increase in the lamellar thickness.     

Morphology and enzymatic degradation of oriented thin film of ultrahigh molecular weight poly[(R)-3-hydroxybutyrate

Thin films of ultrahigh molecular weight poly[(R)-3-hydroxybutyrate] (P(3HB)) were sheared and isothermally crystallized at 100 degrees C. Transmission electron microscopy and atomic force microscopy (AFM) observations revealed that thick fibrous textures, on which lamellae are overgrown normal to the long axis of the fibril, run parallel to the shearing direction. A selected area electron diffraction pattern taken from the fibrils exhibits a fiber pattern of P(3HB) alpha-modification, and the crystallographic c-axis (chain axis) of P(3HB) is set parallel to the long axis of the fibril. In situ AFM observations of enzymatic degradation for the thin film were performed with an extracellular P(3HB) depolymerase from Ralstonia pickettii T1 in a buffer solution. The film surface and thickness became rougher and thinner, respectively, with time after adding the enzyme. During the degradation, fine shish-kebab structures appeared gradually. This fact supports that the amorphous region in the film is preferentially degraded rather than the crystalline one by the depolymerase. The in situ AFM observations also revealed that one thick fibril in the original film is composed of three different states, namely, finer fibril (shish), stacked lamellae (kebab) in edge-on state, and the surrounding amorphous phase.     

Effects of mutations in the substrate-binding domain of poly[(R)-3-hydroxybutyrate] (PHB) depolymerase from Ralstonia pickettii T1 on PHB degradation

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerase from Ralstonia pickettii T1 (PhaZ(RpiT1)) adsorbs to denatured PHB (dPHB) via its substrate-binding domain (SBD) to enhance dPHB degradation. To evaluate the amino acid residues participating in dPHB adsorption, PhaZ(RpiT1) was subjected to a high-throughput screening system consisting of PCR-mediated random mutagenesis targeted to the SBD gene and a plate assay to estimate the effects of mutations in the SBD on dPHB degradation by PhaZ(RpiT1). Genetic analysis of the isolated mutants with lowered activity showed that Ser, Tyr, Val, Ala, and Leu residues in the SBD were replaced by other residues at high frequency. Some of the mutant enzymes, which contained the residues replaced at high frequency, were applied to assays of dPHB degradation and adsorption, revealing that those residues are essential for full activity of both dPHB degradation and adsorption. These results suggested that PhaZ(RpiT1) adsorbs on the surface of dPHB not only via hydrogen bonds between hydroxyl groups of Ser in the enzyme and carbonyl groups in the PHB polymer but also via hydrophobic interaction between hydrophobic residues in the enzyme and methyl groups in the PHB polymer. The L441H enzyme, which displayed lower dPHB degradation and adsorption abilities, was purified and applied to a dPHB degradation assay to compare it with the wild-type enzyme. The kinetic analysis of the dPHB degradation suggested that lowering the affinity of the SBD towards dPHB causes a decrease in the dPHB degradation rate without the loss of its hydrolytic activity for the polymer chain.     

Phase structure and enzymatic degradation of poly(L-lactide)/atactic poly(3-hydroxybutyrate) blends: an atomic force microscopy study

Phase structures and enzymatic degradation of poly(l-lactide) (PLLA)/atactic poly(3-hydroxybutyrate) (ata-PHB) blends with different compositions were characterized by using atomic force microscopy (AFM). Differential scanning calorimetry (DSC) thermograms of PLLA/ata-PHB blends with different compositions showed two glass transition temperatures, indicating that the PLLA/ata-PHB blends are immiscible in the melt. Surface morphologies of the thin films for PLLA/ata-PHB blends were determined by AFM. Phase separated morphology was recognized from the AFM topography and phase images. The domain size of the components was dependent on the blend ratio. Enzymatic degradation of the PLLA/ata-PHB blends was performed by using both PHB depolymerase and proteinase K. Either PLLA or ata-PHB domains were eroded depending on the kinds of enzyme. Surface morphologies after enzymatic degradation have revealed the phase structure along the depth direction. Enzymatic adsorption of PHB depolymerase was examined on the surface of PLLA/ata-PHB blends. The enzyme molecules were found on both domains of the binary blends. The larger number of enzyme molecules was found on the PLLA domains relative to those on the ata-PHB domains, suggesting the higher affinity of the enzyme against PLLA domain.     

Extracellular poly(hydroxyalkanoate) depolymerases and their inhibitor from Pseudomonas lemoignei.

Enzymatic degradation processes of microbial copolyesters, poly(3-hydroxybutyrate-co-3-hydroxyvalerate): P(3HB-co-3HV) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate): P(3HB-co-4HB), were studied by the weight loss (erosion) of copolyester films. These studies employed three extracellular depolymerases which degrade poly(3-hydroxybutyrate): P(3HB). Two enzymes were purified from the culture supernatant of Pseudomonas lemoignei and one from Alcaligenes faecalis T1. The rate of enzymatic degradation of microbial copolyester films with various compositions showed an almost similar tendency to three different P(3HB) depolymerases, and decreased in the following order: P(3HB-co-4HB) greater than P(3HB) greater than P(3HB-co-3HV). An inhibitory protein of P(3HB) depolymerases in the succinate culture medium of P. lemoignei was isolated and characterized. The molecular weight of P(3HB) depolymerase inhibitor was 35,000 as determined by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulphate. This inhibitor of a single polypeptide chain may reversibly bind the serine residues at the active site of P(3HB) depolymerase. This inhibitory protein was not induced in the culture medium when P. lemoignei was grown on P(3HB) as the sole carbon source.     

Effects of Mutations in the Substrate-Binding Domain of Poly[(R)-3-Hydroxybutyrate] (PHB) Depolymerase from Ralstonia pickettii T1 on PHB Degradation

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerase from Ralstonia pickettii T1 (PhaZ_RpiT1) adsorbs to denatured PHB (dPHB) via its substrate-binding domain (SBD) to enhance dPHB degradation. To evaluate the amino acid residues participating in dPHB adsorption, PhaZ_RpiT1 was subjected to a high-throughput screening system consisting of PCR-mediated random mutagenesis targeted to the SBD gene and a plate assay to estimate the effects of mutations in the SBD on dPHB degradation by PhaZ_RpiT1. Genetic analysis of the isolated mutants with lowered activity showed that Ser, Tyr, Val, Ala, and Leu residues in the SBD were replaced by other residues at high frequency. Some of the mutant enzymes, which contained the residues replaced at high frequency, were applied to assays of dPHB degradation and adsorption, revealing that those residues are essential for full activity of both dPHB degradation and adsorption. These results suggested that PhaZ_RpiT1 adsorbs on the surface of dPHB not only via hydrogen bonds between hydroxyl groups of Ser in the enzyme and carbonyl groups in the PHB polymer but also via hydrophobic interaction between hydrophobic residues in the enzyme and methyl groups in the PHB polymer. The L441H enzyme, which displayed lower dPHB degradation and adsorption abilities, was purified and applied to a dPHB degradation assay to compare it with the wild-type enzyme. The kinetic analysis of the dPHB degradation suggested that lowering the affinity of the SBD towards dPHB causes a decrease in the dPHB degradation rate without the loss of its hydrolytic activity for the polymer chain.     

Studies on intracellular degradation of polyhydroxyalkanoic acid-polyethylene glycol copolymer accumulated by Azotobacter chroococcum MAL-201

Azotobacter chroococcum MAL-201 accumulates poly(3-hydroxybutyric acid) [PHB] when grown in glucose containing nitrogen-free Stockdale medium. The same medium supplemented with valerate alone and valerate plus polyethylene glycol (PEG) leads to the accumulation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [PHBV] and PEG containing PHBV-PEG polymers, respectively. The intracellular degradation of these polymers as studied in carbon-free Stockdale medium showed a rapid degradation of PHB followed by PHBV, while it was least in case of PHBV-PEG. The rate of such degradation was 44.16, 26.4 and 17.0 mg h(-1)l(-1) for PHB, PHBV and PHBV-PEG, respectively. During the course of such of PHBV and PHBV-PEG degradation the 3HB mol% of polymers decreased significantly with increase of 3HV mol fraction, the EG mol% in PHBV-PEG, however, remained constant. After 50h of degradation the decrease in intrinsic viscosity and molecular mass of PHBV-PEG were 37.5 and 43.6%, respectively. These values appeared low compared to PHB and PHBV. Moreover, the increasing EG content of polymer retarded their extent of degradation. Presence of PEG, particularly of low molecular weight PEG was inhibitory to intracellular PHA depolymerise (i-PHA depolymerase) activity and the relative substrate specificity of the i-PHA depolymerase of MAL-201 appeared to be PHB > PHBV > PHBV-PEG.     

Properties of a novel intracellular poly(3-hydroxybutyrate) depolymerase with high specific activity (PhaZd) in Wautersia eutropha H16

A novel intracellular poly(3-hydroxybutyrate) (PHB) depolymerase (PhaZd) of Wautersia eutropha (formerly Ralstonia eutropha) H16 which shows similarity with the catalytic domain of the extracellular PHB depolymerase in Ralstonia pickettii T1 was identified. The positions of the catalytic triad (Ser190-Asp266-His330) and oxyanion hole (His108) in the amino acid sequence of PhaZd deduced from the nucleotide sequence roughly accorded with those of the extracellular PHB depolymerase of R. pickettii T1, but a signal peptide, a linker domain, and a substrate binding domain were missing. The PhaZd gene was cloned and the gene product was purified from Escherichia coli. The specific activity of PhaZd toward artificial amorphous PHB granules was significantly greater than that of other known intracellular PHB depolymerase or 3-hydroxybutyrate (3HB) oligomer hydrolases of W. eutropha H16. The enzyme degraded artificial amorphous PHB granules and mainly released various 3-hydroxybutyrate oligomers. PhaZd distributed nearly equally between PHB inclusion bodies and the cytosolic fraction. The amount of PHB was greater in phaZd deletion mutant cells than the wild-type cells under various culture conditions. These results indicate that PhaZd is a novel intracellular PHB depolymerase which participates in the mobilization of PHB in W. eutropha H16 along with other PHB depolymerases.     

Adsorption characteristics of P(3HB) depolymerase as evaluated by surface plasmon resonance and atomic force microscopy

Molecular recognition of poly[(R)-3-hydroxybutyrate] (P(3HB)) depolymerase from Ralstonia pickettii T1 to the surfaces of biodegradable aliphatic polyesters such as P(3HB) and poly(L-lactic acid) (PLLA) was examined from the viewpoints of kinetics and dynamics. To determine the kinetic parameters on the interaction between the substrate-binding domain (SBD) of P(3HB) depolymerase and various polymer substrates with different chemical structures, surface plasmon resonance (SPR) measurements were performed. On the other hand, using an atomic force microscopic (AFM) cantilever tip functionalized with the SBD of P(3HB) depolymerase, the mechanical parameters such as unbinding force to the polymer surfaces were measured. Both the SPR and AFM measurements showed that the SBD has a high affinity to P(3HB) and PLLA. From the results of kinetics and dynamics, the energy potential landscape of SBD-polymer interaction was disclosed on the basis of a phenomenological model, and the mechanism of the interaction was discussed.     

An extracellular poly (3-hydroxybutyrate) depolymerase from Penicillium sp. DS9713a-01

Summary Penicillium sp. DS9713a-01 was obtained by ultraviolet (u.v.) light mutagenesis from the Penicillium sp. DS9713a which can degrade poly (3-hydroxybutyrate) (PHB). The enzymatic activity of DS9713a-01 was 97% higher than that of the wild-type strain. The DS9713a-01 mutant could completely degrade PHB films in 5 days; however, the wild-type strain achieved only 61% at the same time. The extracellular PHB depolymerase was purified from the culture medium containing PHB as the sole carbon source by filtration, ammonium sulfate precipitation and chromatography on Sepharose CL-6B. The molecular weight of the PHB depolymerase was about 15.1kDa determined by SDS-polyacrylamide gel electrophoresis. The optimum activity of the PHB depolymerase was observed at pH 8.6 and 50 °C. The enzyme was stable at temperatures below 37 °C and in the pH range from 8.0 to 9.2. The activity of PHB depolymerase could be activated or inhibited by some metal ions. The apparent K _m value was 0.164 mg ml⁻¹. Mass spectrometric analysis of the water-soluble products after enzymatic degradation revealed that the primary product was the monomer, 3-hydroxybutyric acid.     

Mobilization of poly(3-hydroxybutyrate) in Ralstonia eutropha

Ralstonia eutropha H16 degraded (mobilized) previously accumulated poly(3-hydroxybutyrate) (PHB) in the absence of an exogenous carbon source and used the degradation products for growth and survival. Isolated native PHB granules of mobilized R. eutropha cells released 3-hydroxybutyrate (3HB) at a threefold higher rate than did control granules of nonmobilized bacteria. No 3HB was released by native PHB granules of recombinant Escherichia coli expressing the PHB biosynthetic genes. Native PHB granules isolated from chromosomal knockout mutants of an intracellular PHB (i-PHB) depolymerase gene of R. eutropha H16 and HF210 showed a reduced but not completely eliminated activity of 3HB release and indicated the presence of i-PHB depolymerase isoenzymes.     

Structure and properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) produced by Alcaligenes latus

Summary Random copolymers of 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) with a wide range of compositions varying from 0 to 83 mol% 4HB were produced by Alcaligenes latus from the mixed carbon substrates of 3-hydroxybutyric and 4-hydroxybutyric acids. The structure and physical properties of P(3HB-co-4HB) were characterized by¹H and¹³C NMR spectroscopy, gel-permeation chromatography, and differential scanning calorimetry. The isothermal radial growth rates of spherulites of P(3HB-co-4HB) were much slower than the rate of P(3HB) homopolymer. The enzymatic degradation rates of P(3HB-co-4HB) films by a PHB depolymerase were strongly influenced by the copolymer composition.     

Cloning, expression and characterization of a poly(3-hydroxybutyrate) depolymerase from Marinobacter sp. NK-1

A DNA fragment carrying the gene encoding poly(3-hydroxybutyrate) (P(3HB)) depolymerase was cloned from the genomic DNA of Marinobacter sp. DNA sequencing analysis revealed that the Marinobacter sp. P(3HB) depolymerase gene is composed of 1734 bp and encodes 578 amino acids with a molecular mass of 61,757 Da. A sequence homology search showed that the deduced protein contains the signal peptide, catalytic domain (CD), cadherin-type linker domain (LD), and two substrate-binding domain (SBD). The fusion proteins of glutathione S-transferase (GST) with the CD showed the hydrolytic activity for denatured P(3HB) (dP(3HB)), P(3HB) emulsion (eP(3HB)) and p-nitrophenylbutyrate. On the other hand, the fusion proteins lacking the SBD showed much lower hydrolytic activity for dP(3HB) compared to the proteins containing both CD and SBD. In addition, binding tests revealed that the SBDs are specifically bound not to eP(3HB) but dP(3HB). These suggest that the SBDs play a crucial role in the enzymatic hydrolysis of dP(3HB) that is a solid substrate.     

Identification of the intracellular polyhydroxyalkanoate depolymerase gene of Paracoccus denitrificans and some properties of the gene product

Paracoccus denitrificans degraded poly(3-hydroxybutyrate) (PHB) in the cells under carbon source starvation. Intracellular poly(3-hydroxyalkanoate) (PHA) depolymerase gene (phaZ) was identified near the PHA synthase gene (phaC) of P. denitrificans. Cell extract of Escherichia coli carrying lacZ--phaZ fusion gene degraded protease-treated PHB granules. Reaction products were thought to be mainly D(--)-3-hydroxybutyrate (3HB) dimer and 3HB oligomer. Diisopropylfluorophosphonate and Triton X-100 exhibited an inhibitory effect on the degradation of PHB granules. When cell extract of the recombinant E. coli was used, Mg(2+) ion inhibited PHB degradation. However, the inhibitory effect by Mg(2+) ion was not observed using the cell extract of P. denitrificans.