Kinetic Resolution of Profens by Enantioselective Esterification Catalyzed by Candida antarctica and Candida rugosa Lipases

Profens (2‐arylpropionic acids) are known as one of the major nonsteroidal antiinflammatory drugs (NSAIDs) used in the treatment of inflammation associated with tissue injury. The inflammatory activity of profens is mainly due to their (S)‐enantiomer, whereas they are commercially available not only as pure enantiomers, but as racemates as well. There are several methods widely used in order to obtain enantiomerically pure compounds, however, the kinetic resolution with the application of lipases as biocatalysts may have an added advantage in the production of optically pure active pharmaceutical ingredients, such as milder reaction conditions, reduced energy requirements, and production costs. The aim of this study was to compare the results described in the literature in the case of the influence of reaction medium, alcohol moiety, and reaction temperature on the catalytic activity of lipases from Candida antarctica and Candida rugosa. Chirality 26:663–669, 2014. © 2014 Wiley Periodicals, Inc.     

Kinetic resolution of ibuprofen catalyzed by Candida rugosa lipase in ionic liquids

Candida rugosa lipase-catalyzed esterification of ibuprofen with 1-propanol was conducted in seven ionic liquids and the results were compared with those in isooctane. Although the enzyme showed comparable or higher activity in some ionic liquids compared to that in isooctane, only in the case of [BMIM]PF6 was the enantioselectivity (E = 24.1) almost twice that (E = 13.0) of isooctane. In another six ionic liquids the enzyme enantioselectivity was much poorer (E = 1.1-6.4). At the same conversion of 30%, E of [BMIM]PF6 is more than triple that of isooctane. The lipase stability in [BMIM]PF6 was improved by 25% of that in isooctane. It was concluded that [BMIM]PF6 could be applied to substitute the conventional organic solvent (isooctane) in the esterification of ibuprofen.     

Enantioselectivity of Candida rugosa lipases (Lip1, Lip3, and Lip4) towards 2-bromo phenylacetic acid octyl esters controlled by a single amino acid

Enantiomer discrimination by enzymes is a very accurate mechanism, which often involves few amino acids located at the active site. Lipase isoforms from Candida rugosa are very good enzymatic models to study this phenomenon as they display high sequence homology (>80%) and their enantioselectivity is often pointed out. In the present work, we investigated three lipases from C. rugosa (Lip1, Lip3, and Lip4, respectively) towards the resolution of 2-bromo-arylacetic acid esters, an important class of chemical intermediates in the pharmaceutical industry. All exhibited a high enantioselectivity, with Lip4 preferring the R-enantiomer (E-value = 15), while Lip1 and Lip3 showed an S-enantioselectivity >200. A combination of sequence and structure analysis of the three C. rugosa lipases suggested that position 296 could play a role in S- or R-enantiomer preference of C. rugosa lipases. This led to the construction by site-directed mutagenesis of Lip1 and Lip4 variants in which position 296 was, respectively, exchanged by a Gly, Ala, Leu, or Phe amino acid. Screening of these variants for their enantioselectivity toward 2-bromo phenyl acetic acid octyl esters revealed that steric hindrance of the amino acid residue introduced at position 296 controls both the enantiopreference and the enantioselectivity value of the lipase: bulkier is the amino acid at position 296, larger is the selectivity towards the S-enantiomer. To investigate further these observations at an atomic level, we carried out a preliminary modeling study of the tetrahedral intermediates formed by Lip1 and Lip4 with the (R, S)-2-bromo-phenylacetic acid octyl ester enantiomers that provides some insight regarding the determinants responsible for lipase enantiodiscrimination.     

Activity and enantioselectivity of wildtype and lid mutated Candida rugosa lipase isoform 1 in organic solvents

The activity and enantioselectivity of lipase 1 from Candida rugosa and of a chimera enzyme obtained by replacing the lid of isoform 1 with the lid of isoform 3 were compared in organic solvents. The alcoholysis of chloro ethyl 2-hydroxy hexanoate with methanol and of vinyl acetate with 6-methyl-5-hepten-2-ol were used as model reactions in different reaction conditions. The chimera enzyme was less active and enantioselective than the wildtype in all the conditions tested. A rationale for such decreases could be that the chimera lipase has a lower proportion of enzyme molecules in the open form. This might lead to a hindered access to the enzyme active site, thus affecting the catalytic activity.     

Immobilization of Candida rugosa lipase by cross-linking with glutaraldehyde followed by entrapment in alginate beads

Candida rugosa lipase was immobilized by first cross-linking with glutaraldehyde and then entrapping in calcium alginate beads. The presence of 2-propanol during cross-linking markedly improved the enzyme activity and activity recovery. Maximal enzyme activity (2.1?mmol?h^?1?g^?1 immobilized conjugate, wet weight) and activity recovery (117%) were observed at 30% (v/v) 2-propanol for hydrolysis of olive oil, which were 1.7 and 2.0 times higher than those of the immobilized enzyme prepared in the absence of 2-propanol. The half-life of the immobilized lipase prepared by entrapment after cross-linking in 30% 2-propanol was 1.6 times higher than that prepared by entrapment of the native lipase without cross-linking and 2-propanol pretreatment. The enantioselectivity of the former was 11 times higher than that of the latter for hydrolysis of racemic ketoprofen ethyl ester.     

Sequential Kinetic Resolution by two Enantioselective Enzymes

Enhancement of the enantioselectivity by simultaneous use of two enzymes in a sequential kinetic resolution process is presented. The model system consisted of carboxylesterase NP catalyzed hydrolysis of racemic methyl 2-chloropropionate, followed by dehalogenation of the enantiomerically enriched 2-chloropropionate by DL-dehalogenase into lactate. Optimal results are shown to be attained when the conversion rates of both faster reacting enantiomers are the same. An optimization parameter D for sequential resolutions is introduced. The kinetics of both reaction steps were investigated separately by progress curve analysis, and the enantioselectivity of the enzymes was determined. From a quantitative kinetic model we could formulate the sequential resolution, which yielded the predicted improvements of product enantiomeric excess.     

Kinetic resolution of amino acid esters catalyzed by lipases

Racemic amino acids were resolved by lipase via hydrolysis of their esters. Lipases (Pseudomonas lipase from Amano PS, Rhizopus lipase from Serva, and porcine pancrease lipase from Sigma) could selectively hydrolyze the L-amino acid esters in aqueous solution with high reactivities and selectivities. The effect of the structural changes in the ester moiety on the stereoselectivity of the lipases was also investigated using D ,L -homophenylalanine as a model. Procedures were developed for the resolution of natural and unnatural amino acids. © 1996 Wiley-Liss, Inc.     

Sequential Kinetic Resolution by two Enantioselective Enzymes

Enhancement of the enantioselectivity by simultaneous use of two enzymes in a sequential kinetic resolution process is presented. The model system consisted of carboxylesterase NP catalyzed hydrolysis of racemic methyl 2-chloropropionate, followed by dehalogenation of the enantiomerically enriched 2-chloropropionate by DL-dehalogenase into lactate. Optimal results are shown to be attained when the conversion rates of both faster reacting enantiomers are the same. An optimization parameter D for sequential resolutions is introduced. The kinetics of both reaction steps were investigated separately by progress curve analysis, and the enantioselectivity of the enzymes was determined. From a quantitative kinetic model we could formulate the sequential resolution, which yielded the predicted improvements of product enantiomeric excess.     

Esterification of 2-methylalkanoic acids Catalysed by Lipase from Candida rugosa: Enantioselectivity as a Function of water Activity and Alcohol Chain Length

Esterifications catalysed by immobilised lipase from Candida rugosa (CRL) in cyclohexane at constant water activity (a_w = 0.76) were studied using 2-methyl substituted octa-, nona- or decanoic acids and n-alcohols of varying chain length as substrates. The importance of controlling the water activity and choosing the right alcohol for obtaining maximum enantioselectivity is demonstrated. The immobilised lipase was easily recovered without loss of activity and enantioselectivity.     

Esterification of 2-methylalkanoic acids Catalysed by Lipase from Candida rugosa: Enantioselectivity as a Function of water Activity and Alcohol Chain Length

Esterifications catalysed by immobilised lipase from Candida rugosa (CRL) in cyclohexane at constant water activity (a_w = 0.76) were studied using 2-methyl substituted octa-, nona- or decanoic acids and n-alcohols of varying chain length as substrates. The importance of controlling the water activity and choosing the right alcohol for obtaining maximum enantioselectivity is demonstrated. The immobilised lipase was easily recovered without loss of activity and enantioselectivity.     

Evaluation of Medium Components by Plackett-Burman Statistical Design for Lipase Production by Candida rugosa and Kinetic Modeling

Lipase production by Candida rugosa was carried out in submerged fermentation. Plackett-Burman statistical experimental design was applied to evaluate the fermentation medium components. The effect of twelve medium components was studied in sixteen experimental trials. Glucose, olive oil, peptone and FeCl3?6H2O were found to have more significance on lipase production by Candida rugosa. Maximum lipase activity of 3.8 u mL-1 was obtained at 50 h of fermentation period. The fermentation was carried out at optimized temperature of 30oC, initial pH of 6.8 and shaking speed of 120 r/min. Unstructured kinetic models were used to simulate the experimental data. Logistic model, Luedeking-Piret model and modified Luedeking-Piret model were found suitable to efficiently predict the cell mass, lipase production and glucose consumption respectively with high determination coefficient(R2). From the estimated values of the Luedeking-Piret kinetic model parameters, α and β, it was found that the lipase production by Candida rugosa is growth associated.     

Evaluation of Medium Components by Plackett-Burman Statistical Design for Lipase Production by Candida rugosa and Kinetic Modeling

Lipase production by Candida rugosa was carried out in submerged fermentation. Plackett-Burman statistical experimental design was applied to evaluate the fermentation medium components. The effect of twelve medium components was studied in sixteen experimental trials. Glucose, olive oil, peptone and FeCl3?6H2O were found to have more significance on lipase production by Candida rugosa. Maximum lipase activity of 3.8 u mL-1 was obtained at 50 h of fermentation period. The fermentation was carried out at optimized temperature of 30oC, initial pH of 6.8 and shaking speed of 120 r/min. Unstructured kinetic models were used to simulate the experimental data. Logistic model, Luedeking-Piret model and modified Luedeking-Piret model were found suitable to efficiently predict the cell mass, lipase production and glucose consumption respectively with high determination coefficient(R2). From the estimated values of the Luedeking-Piret kinetic model parameters, α and β, it was found that the lipase production by Candida rugosa is growth associated.     

Resolution of (±)-trans-2-phenylcyclohexan-1-ol by lipases from Candida rugosa: effect of catalyst source and reaction conditions

Candida rugosa lipase resolved trans-2-phenylcyclohexan-1-ol. A commercial and a laboratory preparation were compared and better results were obtained with the latter (E >200). Both enzyme preparations were strongly dependent on the substrate concentration for their enantioselectivity. This effect could be due to the presence of an esterase activity unspecific for trans-2-phenylcyclohexan-1-ol. © Rapid Science Ltd. 1998     

Mathematical Modelling of Lipase Catalysed Resolution of O-Acetyl and O-Formyl Derivatives of Secondary Alcohols

Lipase catalysed transesterification of O-acetyl and O-formyl derivatives of several sterically hindered secondary alcohols with n-butanol is studied. The reaction is mathematically modelled and the rate constants in the model are evaluated by transient parameter estimation procedure. Several models are considered for predicting the enantiomeric excess (ee) of the product and compared with experimental observations. It is found that the maximum ee depends only on the rate constants of the two competing reactions and not on the order of reaction. A second order model is found to predict the observed behaviour well. When the data is fitted to an equilibrium type of model developed by Chen et al. (1987), it is found that the rate of forward reaction is several orders of magnitude larger than the rate of reverse reaction. The effect of acetyl and formyl groups on the reactivity and selectivity are also discussed.     

Hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl thioester by Carica papaya lipase in water-saturated organic solvents

For the first time, the Carica papaya lipase (CPL) stored in crude papain is explored as a potential enantioselective biocatalyst for obtaining chiral acids from their racemic thioesters. Hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl thioester in water-saturated organic solvents is employed as a model system for studying the effects of temperature and solvents on lipase activity and enantioselectivity. An optimal temperature of 60 degrees C, based on the initial rate of (S)-thioester and a high enantiomeric ratio (i.e., E-value defined as the ratio of initial rates for both substrates) of >100 at 45 degrees C in isooctane, is obtained. Kinetic analysis, considering product inhibition and enzyme deactivation, is also performed, showing agreement between the experimental and best-fit conversions for (S)-thioester. A comparison of the kinetic and thermodynamic behaviors of CPL and Candida rugosa lipase (CRL) in isooctane and cyclohexane indicates that both lipases are very similar in terms of thermodynamic parameters DeltaDeltaH and DeltaDeltaS, initial rate of (S)-substrate, and E-value when (R,S)-naproxen 2,2,2-trifluoroethyl thioester or ester is employed as substrate.     

Immobilization of lipase from Candida rugosa on Eupergit C supports by covalent attachment

The present study compares the results of three different covalent immobilization methods employed for immobilization of lipase from Candida rugosa on Eupergit^® C supports with respect to enzyme loadings, activities and coupling yields. It seems that method yielding the highest activity retention of 43.3% is based on coupling lipase via its carbohydrate moiety previously modified by periodate oxidation. Study of thermal deactivation kinetics at three temperatures (37, 50 and 75 °C) revealed that the immobilization method also produces an appreciable stabilization of the biocatalyst, changing its thermal deactivation profile. By comparison of the t_1/2 values obtained at 75 °C, it can be concluded that the lipase immobilized via carbohydrate moiety was almost 2-fold more stable than conventionally immobilized one and 18-fold than free lipase. The immobilization procedure developed is quite simple, and easily reproduced, and provides a promising solution for application of lipase in aqueous and microaqueous reaction system.     

Significant enhancement of lipase enantioselectivity toward (S)- Ketoprofen ester at pH 2

The optimal activity of a Candida rugosa lipase (Lipase OF) for hydrolysis of 2-chloroethyl ester of Ketoprofen [2-(3- benzoyphenyl) propionic acid] was at pH 4.0, while the best enantioselectivity (E) was at pH 2.2 where the enzyme was still 60% active and stable.     

Immobilization of Candida rugosa lipase on colloidal gas aphrons (CGAs)

A novel technique for immobilization of Candida rugosa lipase onto anionic colloidal gas aphrons (CGAs) is described. CGAs are spherical microbubbles (10-100 microm) composed of an inner gas core surrounded by a surfactant shell. In this initial study, greater than 80% lipase (w/w) was effectively retained on the CGAs. Leakage of protein from the CGAs and the activity of the adsorbed lipase decreased with increasing enzyme loading; this indicates that multilayers of lipase may be adsorbing onto the CGAs. The CGA-immobilised lipase displayed normal Michaelis-Menten dependence on substrate concentration and also exhibited greater activity than the free enzyme.     

Separation of Subclasses of Human Serum High Density Lipoproteins by Zonal Ultracentrifugation

An improved one-step method for the preparative separation of three subfraotions of high-density lipoproteins from normal human serum has been developed. It employs the method of rate zonal ultracentrifugation in a Z-60 rotor using a discontinuous NaBr gradient in the density range of 1.0 - 1.4. The density gradients were monitored directly by a flow-through density meter allowing the direct read-out of the actual densities in the process of filling and emptying the rotor. The separation of the three density fractions from 5 to 15 ml serum was achieved during a single 12 hours run at 59.000 rpm. The three fractions showed characteristically different patterns on polyacrylamide gel electrophoresis and differences in their lipid and protein composition.     

The Effect of Substrate Hydrophobicity on the Kinetic Behaviour of Immobilized Candida rugosa Lipase

Candida rugosa lipase (EC 3.1.1.3.) was immobilized in a hydrophilic polyurethane foam and used in the hydrolysis of olive oil, in H-hexane. The results obtained were compared with those from a previous study, in which the same lipase preparation was used in the esterification of ethanol with butyric acid.

The initial rate of hydrolysis increased exponentially with increasing olive oil concentration. In contrast, for the esterification reaction, Michaelis-Menten kinetics with inhibition by both substrates, had been observed.

The effect of medium viscosity, stirring conditions and size of immobilization particles could not explain the observed kinetics of the hydrolytic reaction. However, a direct relationship was observed between the log P values of the reaction medium and the initial rate of hydrolysis, i.e., activation of the immobilized Candida rugosa lipase appears to be promoted by a high hydrophobicity of the reaction medium.

In the case of the esterification reaction, no similar correlation was found.