Structural organization of pLP1, a cryptic plasmid from Lactobacillus plantarum CCM 1904

To construct shuttle vectors based on an endogenous replicon, we isolated a small cryptic plasmid (pLP1) from Lactobacillus plantarum CCM 1904. The nucleotide sequence (2093 bp, 38.25 GC mol%) revealed one major open reading frame encoding for a 317 amino acid protein (Rep). Comparisons with proteins encoded by other Gram-positive bacteria plasmids strongly suggest that the protein encoded by pLP1 has a replicative role. The presence of a consensus sequence including a tyrosine residue known to be the replication protein binding site to the DNA (in phage φX174) strengthens this hypothesis. The DNA sequence contains also a sequence similar to the pC194 origin nick sequence, which initiates the plasmid replication at the plus origin, characteristic of plasmids which replicate following a rolling circle mechanism via single-stranded DNA intermediates. A set of 13 direct repeats of 17 bp could be involved in the expression of the incompatibility or in the copy number control as in the other plasmids. A promoter sequence located at the rep 5′ region has been identified and is functional in Bacillus subtilis.     

Characterization of a novel Streptococcus thermophilus rolling-circle plasmid used for vector construction

The complete nucleotide sequence of pER371, a native plasmid in Streptococcus thermophilus ST137, was determined. A putative open reading frame coding for a replication protein, Rep371, was identified. A characteristic promoter sequence and ribosome-binding site were found upstream of rep371. Rep371 (247 amino acid residues) does not show homology with RepA and RepS of the small S. thermophilus cryptic plasmids pST1-No.29 and pST1 respectively. The plus-origin sequence and Rep371 are highly homologous to the corresponding elements of the Staphylococcus aureus plasmids pC194 and pSK89. A novel 140-nucleotide palindromic minus-origin sequence, which is structurally similar but does not show sequence homology to the palA region of pC194, was identified in pER371. A palindromic sequence capable of forming a putative hairpin structure was identified and subsequently recognized as being highly conserved among several lactococcal rolling-circle plasmids. Cloning vectors derived from pER371 should provide valuable gene-delivery vehicles for the genetic engineering of lactic acid bacteria. Received: 25 November 1997 / Received last revision: 13 April 1998 / Accepted: 19 April 1998     

Isolation of a minireplicon of the virulence plasmid pXO2 of Bacillus anthracis and characterization of the plasmid-encoded RepS replication protein

A minireplicon of plasmid pXO2 of Bacillus anthracis was isolated by molecular cloning in Escherichia coli and shown to replicate in B. anthracis, Bacillus cereus, and Bacillus subtilis. The pXO2 replicon included (i) an open reading frame encoding the putative RepS replication initiation protein and (ii) the putative origin of replication. The RepS protein was expressed as a fusion with the maltose binding protein (MBP) at its amino-terminal end and purified by affinity chromatography. Electrophoretic mobility shift assays showed that the purified MBP-RepS protein bound specifically to a 60-bp region corresponding to the putative origin of replication of pXO2 located immediately downstream of the RepS open reading frame. Competition DNA binding experiments showed that the 5' and central regions of the putative origin were important for RepS binding. MBP-RepS also bound nonspecifically to single-stranded DNA with a lower affinity.     

Comparison of Low-Molecular-Weight Heat Stress Proteins Encoded on Plasmids in Different Strains of Streptococcus thermophilus

Streptococcus thermophilus is used extensively for industrial fermentation of dairy products. Some strains of S. thermophilus are known to carry plasmids, and many of these plasmids are suspected of encoding low-molecular-weight heat stress proteins (Hsps) that may aid in survival under stressful conditions. In order to confirm the presence and examine the similarity of these low-molecular-weight Hsps, genes were identified and sequenced encoding Hsps on plasmids pER16 (4.5 kb), pER35 (10 kb), and pER36 (3.7 kb) from three different strains of S. thermophilus. The plasmid replication proteins were also sequenced to examine their relatedness. Amino acid sequence comparisons of the Hsps and of the replication proteins revealed a high degree of identity suggesting a common origin. Heat stress proteins enhance the viability of bacteria in extreme environments, and the presence of an Hsp encoded on a plasmid may enhance survival of S. thermophilus under harsh production conditions. Received: 8 February 2000 / Accepted: 8 March 2000     

Identification of a replication initiation protein of the pVV8 plasmid from Thermus thermophilus HB8

Recently, the extremely thermophilic bacterium Thermus thermophilus HB8 has been demonstrated to harbor a circular plasmid designated by pVV8 in addition to two well-known plasmids, pTT8 and pTT27, and its entire sequence has been determined. The absence of any obvious replication initiation gene in the 81.2 kb plasmid prompted us to isolate its minimum replicon. By in vivo replication assays with fragments deleted in a stepwise manner, a minimum replicon containing a single ORF, TTHV001, was identified. A protein encoded by TTHV001 showed no amino acid sequence similarity to other function-known proteins. As the results of in vivo and in vitro experiments strongly suggested that the TTHV001 protein was involved in the replication initiation of pVV8, the protein and the gene were referred to as RepV and repV, respectively. The RepV protein binds to an inverted repeat sequence within its own repV gene and then triggers the unwinding of the DNA duplex in an A + T-rich region located just downstream from the inverted repeat. The in vivo replication assays with minimum replicon mutants in the RepV binding site or the unwinding region demonstrated that the unwinding in the region by the RepV binding was essential for pVV8 replication initiation.     

The region essential for efficient autonomous replication of pSa in Escherichia coli

Summary Comparative analyses were made between plasmid pSa17, a deletion derivative of pSa that is capable of replicating efficiently in Escherichia coli and plasmid pSa3, a derivative that is defective for replication. By comparing the restriction maps of these two derivatives, the regions essential for replication and for stable maintenance of the plasmid were determined. A 2.5 kb DNA segment bearing the origin of DNA replication of pSa17 was sequenced. A 36 kDa RepA protein was encoded in the region essential for replication. Downstream of the RepA coding region was a characteristic sequence including six 17 bp direct repeats, the possible binding sites of RepA protein, followed by AT-rich and GC-rich sequences. Furthermore, an 8 bp incomplete copy of the 17 bp repeat was found in the promoter region of the repA gene. Based on the hypothesis that RepA protein binds to this partial sequence as well as to intact 17 bp sequences, an autoregulatory system for the synthesis of RepA protein may be operative. Another open reading frame (ORF) was found in the region required for the stability of the plasmid. The putative protein encoded in this ORF showed significant homology to several site-specific recombination proteins. A possible role of this putative protein in stable maintenance of the plasmid is discussed.     

Specificity of the interactions between the Rep proteins and the origins of replication of Staphylococcus aureus plasmids pT181 and pC221

Summary pT181 and pC221 are closely relatedStaphylococcus aureus plasmids with the same genome organization, which is characterized by the overlapping of the origin of replication with the sequence encoding a protein, Rep, essential for plasmid replication. Former results have shown the lack of in vivo cross-complementation between these two plasmids, while in vitro studies have revealed the ability of both Rep proteins to act on either origin. One possible explanation for this difference was based on a previous analysis of the incompatibility expressed by the origin of replication of these plasmids, showing that the origin embedded in therep gene competes for Rep utilization with the origin of a test plasmid and that changes in the sequence of the origin reduce its ability to compete. To avoid this problem, in the present work special hybrids were constructed in which the origin of replication overlapping therep gene was mutationally inactivated, without changing the amino acid sequence of the encoded protein. The level of Rep expression by these hybrids could be varied by taking advantage of what is presently known about the control of Rep synthesis in plasmid pT181. The results of complenentation studies conducted using these hybrids have shown that: (i) at the usual level of expression for a wild-type plasmid each Rep protein can initiate replication strictly from its corresponding origin; (ii) when overproduced, the pT181 RepC protein could also act efficiently on the pC221 origin; a functional pT181 origin present in the same host completely prevented this complementation; (iii) in excess, the RepD protein encoded by pC221 could replicate a plasmid carrying the pT181 origin but could not ensure the hereditary stability of such a plasmid in the absence of another active replication system; (iv) when overproduced both RepC and RepD could act on the origin of replication of three other related plasmids pS194, pC223 and pUB112.     

Replication of the Streptomyces plasmid pSN22 through single-stranded intermediates

The replication of the 11 kb conjugative multicopy Streptomyces plasmid pSN22 was analyzed. Mutation and complementation analyses indicated that the minimal region essential for plasmid replication was located on a 1.9 kb fragment of pSN22, containing a trans-acting element encoding a replication protein and a cis-acting sequence acting as a replication origin. Southern hybridization showed that minimal replicon plasmids accumulated much more single-stranded plasmid molecules than did wild-type pSN22. Only one strand was accumulated. A 500 by fragment from the pSN22 transfer region was identified which reduced the relative amount of single-stranded DNA, when added in the native orientation to minimal replicon plasmids. This 500 by DNA sequence may be an origin for second-strand synthesis. It had no effect on the efficiency of co-transformation, plasmid incompatibility, or stability. The results indicate that pSN22 replicates via single-stranded intermediates by a rolling circle mechanism.     

Insertion of a heterologous gene construct into a non-functional ORF of the Streptococcus thermophilus chromosome

An integrative vector was constructed for inserting heterologous genes within a non-functional open reading frame (ORF) on the chromosome of Streptococcus thermophilus. The vector, pINTRS, contained a temperature sensitive origin of replication and an erythromycin resistance gene for initial selection in S. thermophilus. The region of the vector containing unique cloning sites, for insertion of recombinant genes, was flanked by homologous DNA sequences corresponding to a pseudogene in S. thermophilus to facilitate chromosomal integration. The gene encoding green fluorescent protein, regulated by a plasmid borne hsp promoter of S. thermophilus, was cloned into pINTRS to demonstrate proper functioning of the vector. Mention of trade names or commercial products in this publication is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

Molecular structure of the replication origin of a Bacillus amyloliquefaciens plasmid pFTB14

Summary The structure of a 1.5-kb DNA sequence that is necessary and sufficient for the replication of an 8.2-kb cryptic plasmid, pFTB14, isolated from a strain of Bacillus amyloliquefaciens has been characterized. The 1.5-kb DNA sequence contains an open reading frame, rep, stretching for 1017 bp, a promoter region for rep expression, and a possible replication origin for the plasmid upstream of the promoter. The rep product is trans-active and essential for plasmid replication. The predicted rep protein is a basic protein, as are the RepC protein of pT181, RepB of pUB110 and protein A of pC194 (all these found in staphylococci) and the protein of the R6K plasmid of Escherichia coli. The predicted rep protein has highly homologous amino acid sequences with protein A of pC194 and RepC of pUB110 throughout the protein molecule, but not with RepC of pT181, of R6K or protein RepH encoded by and iniating the replication of pC194.     

Structural organization of pLP1, a cryptic plasmid from Lactobacillus plantarum CCM 1904

To construct shuttle vectors based on an endogenous replicon, we isolated a small cryptic plasmid (pLP1) from Lactobacillus plantarum CCM 1904. The nucleotide sequence (2093 bp, 38.25 GC mol%) revealed one major open reading frame encoding for a 317 amino acid protein (Rep). Comparisons with proteins encoded by other Gram-positive bacteria plasmids strongly suggest that the protein encoded by pLP1 has a replicative role. The presence of a consensus sequence including a tyrosine residue known to be the replication protein binding site to the DNA (in phage phi X174) strengthens this hypothesis. The DNA sequence contains also a sequence similar to the pC194 origin nick sequence, which initiates the plasmid replication at the plus origin, characteristic of plasmids which replicate following a rolling circle mechanism via single-stranded DNA intermediates. A set of 13 direct repeats of 17 bp could be involved in the expression of the incompatibility or in the copy number control as in the other plasmids. A promoter sequence located at the rep 5' region has been identified and is functional in Bacillus subtilis.     

Complete Sequence of Plasmid pMP1 from the Marine Environmental Vibrio vulnificus and Location of Its Replication Origin

A novel cryptic plasmid, pMP1, from an environmental Vibrio vulnificus MP-4 isolated from Mai Po Nature Reserve in Hong Kong, has been characterized. The 7.6-kb plasmid had guanine–cytosine content of 40.03% and encoded four open reading frames (ORFs) with >100 amino acids. The predicted protein of ORF1 contained 478 amino acids showing 29% identity and 50% similarity over 309 amino acids to the integrase of Vibrio cholerae phage VP2. ORF2 encoded a putative protein of 596 amino acids, which were 23% identity and 42% similarity over 455 amino acids to the tail tape measure protein TP901 of Chromohalobacter salexigens phage. ORF3 and ORF4 encoded putative proteins of 103 and 287 amino acids, respectively, but showed no homologies to any known proteins. Further experiments indicated that a 3.2-kb fragment from EcoRI digestion could self-replicate. Analysis indicated that a sequence upstream of ORF4 had the features characteristic of theta-type replicons: AT-rich region, six potential direct repeats (iterons) spaced approximately two DNA helical turn apart (about 23 bp), two copies of 9 bp dnaA boxes, three Dam methylation sites, and five inverted repeats. Complementation experiments confirmed that the protein encoded by ORF4 was required for plasmid replication. We propose that ORF4 encode a new type of Rep protein and pMP1 is a new type of theta plasmid.     

Analysis of soybean chloroplast DNA replication by two-dimensional gel electrophoresis

Chloroplast DNA replication was studied in the green, autotrophic suspension culture line SB-1 of Glycine max. Three regions (restriction fragments Sac I 14.5, Pvu II 4.1 and Pvu II 14.8) on the plastome were identified that displayed significantly higher template activity in in vitro DNA replication assays than all other cloned restriction fragments of the organelle genome, suggesting that these clones contain sequences that are able to direct initiation of DNA replication in vitro. In order to confirm that the potential in vitro origin sites are functional in vivo as well, replication intermediates were analyzed by two-dimensional gel electrophoresis using cloned restriction fragments as probes. The two Pvu II fragments that supported deoxynucleotide incorporation in vitro apparently do not contain a functional in vivo replication origin since replication intermediates from these areas of the plastome represent only fork structures. The Sac I 14.5 chloroplast DNA fragment, on the other hand, showed intermediates consistent with a replication bubble originating within its borders, which is indicative of an active in vivo origin. Closer examination of cloned Sac I 14.5 sub-fragments confirmed high template activity in vitro for two, S/B 5 and S/B 3, which also seem to contain origin sites utilized in vivo as determined by two-dimensional gel electrophoresis. The types of replication intermediate patterns obtained for these sub-fragments are consistent with the double D-loop model for chloroplast DNA replication with both origins being located in the large unique region of the plastome [17, 18]. This is the first report of a chloroplast DNA replication origin in higher plants that has been directly tested for in vivo function.     

Nucleotide Sequence and Genetic Characterization of the Novel IncQ-like Plasmid pIE1107

The analysis of the complete nucleotide sequence of the small resistance plasmid pIE1107 revealed a close similarity to the well-known IncQ plasmids. Highly conserved replication proteins and nearly identical origins of replication (oriV) suggest equivalent functions in the related replication systems. However, pIE1107 contains two copies of IncQ-oriV-like DNA which are slightly different regarding the iterons. Upon deletion of a silent copy of IncQ-oriV-like DNA the resulting plasmid is fully compatible with IncQ plasmids, indicating that there is no mutual communication between the replication control of the respective replicons. Experiments with clonedoriV DNA strongly suggest that the replication initiation protein of pIE1107 has specialized into the distinct target-iterons of its ownoriV which differs only by a few nucleotides from theoriV of IncQ plasmids. Implications from the apparent highly specific protein–DNA recognition and from the incompatibility properties of pIE1107 for the evolution of a family of compatible, IncQ-like plasmids are discussed.     

ICETh1 and ICETh2, two interdependent mobile genetic elements in Thermus thermophilus transjugation

Cell to cell DNA transfer between Thermus thermophilus, or transjugation, requires the natural competence apparatus (NCA) of the recipient cell and a DNA donation machinery in the donor. In T. thermophilus HB27, two mobile genetic elements with functional similarities to Integrative and Conjugative Elements (ICEs) coexist, ICETh1 encoding the DNA transfer apparatus and ICETh2, encoding a putative replication module. Here, we demonstrate that excision and integration of both elements depend on a single tyrosine recombinase encoded by ICETh2, and that excision is not required but improves the transfer of these elements to a recipient cell. These findings along with previous results suggest that ICETh1 and ICETh2 depend on each other for spreading among T. thermophilus by transjugation.     

Nucleotide sequence of the region of the origin of replication of the broad host range plasmid RK2

Summary A DNA sequence cosisting of 617 base pairs (bp) from the region of the origin of replication of the broad-host range plasmid RK2 has been determined. Included within this sequence is a 393 bp HpaII restriction fragment that provides a functional origin or replication when other essential RK2 specified functions are provided in trans. Also contained in this sequence is a region, distinguished functionally from the replication origin, which is involved in the expression of inc ₂ incompatibility, i.e., the ability of derivatives of RK2 to eliminate a resident RK2 plasmid. The 617 bp sequence includes eight 17 base pair direct repeats with 5 located within the region required for a functional replication origin and 3 within the region involved in inc ₂ incompatibility. In addition, a 40 bp region rich in A-T followed by a 60 bp stretch having a high G+C content is present. Deletion evidence indicates that the A-T rich and possibly the G+C regions are required for a functional replication origin. Based on the evidence contained in this and the preceding paper (Thomas et al. 1980 b) a model will be presented for the involvement of these specific sequences in the initiation of RK2 DNA replication, plasmid maintenance and plasmid incompatibility.     

Distribution of Plasmid-Borne Stress Protein Genes in Streptococcus thermophilus and Other Lactic Acid Bacteria

The presence of heat stress protein genes (hsp) was tested by Southern hybridization analysis in total DNA extracts from species of the genus Streptococcus (47 strains), Lactobacillus (34 strains), Lactococcus (24 strains), and Leuconostoc (5 strains). The biotinylated hsp16.4 probe prepared from an ORF2 fragment of pER341 (2.8 kb) tested positively with restricted DNA extracts of seven Streptococcus thermophilus strains and a single strain of Lactococcus lactis subsp. cremoris. In all positive S. thermophilus strains, the hsp was located on plasmids ranging from ca. 2.8 kb to 11 kb in size, while hsp was present in a 7.5-kb plasmid in Lactococcus lactis subsp. cremoris. Southern blots with a rep probe showed that all hsp16.4 ⁺ plasmids in S. thermophilus strains also shared homology with the replication function (rep) of pER341, suggesting the common origin of these plasmids. Received: 18 July 1998 / Accepted: 19 August 1998     

Cloning and Characterization of the Replicon of the Nocardia italica Plasmid, pNI100

A 19-kb plasmid, pNI100, was isolated from Nocardia italica CCRC12359; its replicon was cloned and characterized as having a single open reading frame (ORF) of 1188 bp specifying 396 amino acids (aa). Analyses of the deduced aa sequence of the Rep protein indicated that characteristics of three consensus sequences and a P-loop-like motif in the Rep protein of plasmid pSG5, a conjugative plasmid involving a rolling-circle replication mechanism, were conserved in those of plasmid pNI100. Phenotypically, a pock structure was produced in the regenerated mycelium by introducing pNI100 DNA into the Streptomyces lividans protoplast. This result strongly suggests that pNI100 is a conjugative plasmid and probably replicates by a rolling-circle replication mechanism. By using the replicon of pNI100, a bifunctional plasmid pNI105 that could replicate in both Escherichia coli and S. lividans was constructed and found to be a useful cloning shuttle vector.     

Removal of symmetrical sequences from the origin region of plasmid R1 reduces its replication efficiency

The R1 origin region contains many symmetrical DNA sequence elements which allow the formation of complex secondary structures. A 218-bp in vivo deletion in a cloned R1 origin fragment removes most of them. As this deletion was never observed in plasmids containing all R1 replication functions, it was introduced by BglI in vitro recombination into the `basic replicon' of R1 cloned into pBR322. The recombinant plasmid with the 218-bp deletion and its derivatives unambiguously show that the deleted symmetrical elements are not absolutely essential for R1 replication as was previously assumed though they seem to determine a more efficient origin function. Likewise, a hypothetical protein of a mol. wt. of 14 000 daltons, the major part of which would be encoded by the deleted sequences, does not seem to be of particular importance for R1-specific replication. This is the first report of an alteration in the origin region of an IncFII plasmid which affects plasmid replication without abolishing it completely.