Bioaugmentation of the decolorization rate of acid red GR by genetically engineered microorganism <Emphasis Type="Italic">Escherichia coli</Emphasis> JM109 (pGEX-AZR)

The study showed that the genetically engineered microorganism (GEM) bioaugment successfully the dye wastewater biotreatment systems to enhance acid red GR (ARGR) removal. Escherichia coli JM109 (pGEX-AZR) was the GEM with higher azoreductase activity. The kinetics of the ARGR decolorization by the E. coli JM109 (pGEX-AZR) agreed with Andrews model. The kinetic parameters, r _dye,max, K _s and K _i , were found to be 42.45 mg g⁻¹ h⁻¹, 584.93 mg L⁻¹ and 556.89 mg L⁻¹, respectively. The E. coli JM109 (pGEX-AZR) was tested in anaerobic sequencing batch reactors (AnSBR) in order to enhance the ARGR decolorization. The decolorization rate of ARGR was affected by the amount of E. coli JM109 (pGEX-AZR) inoculation and the best amount of inoculation was 10%. The continuous operations of the four bioreactors with different E. coli JM109 (pGEX-AZR) immobilization supports showed that the E. coli JM109 (pGEX-AZR) could bioaugment decolorization in AnSBRs with suspended and immobilized on macroporous foam carriers. For 42 days continuous operation in the AnSBRs, both the tolerance to ARGR concentration shock and the decolorization rate in these two bioaugmented AnSBRs are higher than those of the other two systems, control system and bioaugmented AnSBRs system with the sodium-alginate immobilized cells, the decolorization rate reached 90%. Changes in microbial community were detected by ribosomal intergenic spacer analysis (RISA) and amplified ribosomal DNA restriction analysis (ARDRA), which revealed that the introduced E. coli JM109 (pGEX-AZR) was persistent in the augmented systems and maintained higher metabolic activity.     

A novel method of producing the pharmaceutical intermediate (R)-2-chloromandelic acid by bioconversion

(R)-2-Chloromandelic acid (R­CM) is one of the chiral building blocks used in the pharmaceutical industry. As a result of screening for microorganisms that asymmetrically hydrolyze racemic 2­chloromandelic acid methyl ester (CMM), Exophiala dermatitidis NBRC6857 was found to produce R­CM at optical purity of 97% ee. The esterase that produces R­CM, EstE, was purified from E. dermatitidis NBRC6857, and the optimal temperature and pH of EstE were 30°C and 7.0, respectively. The estE gene that encodes EstE was isolated and overexpressed in Escherichia coli JM109. The activity of recombinant E. coli JM109 cells overexpressing estE was 553 times higher than that of E. dermatitidis NBRC6857. R­CM was produced at conversion rate of 49% and at optical purity of 97% ee from 10% CMM with 0.45 mg-dry-cell/L recombinant E. coli JM109 cells. Based on these findings, R­CM production by bioconversion of CMM may be of interest for future industrial applications.     

Degradation of trichloroethylene by recombinant E. coli in continuous culture

Trichloroethylene (TCE) degradation by the recombinant E. coli JM109 harboring a TCE-degradative plasmid (pIO720 or pIO72K) in continuous culture was studied. The ampicillin-resistant plasmid, pIO720, contained the cumene dioxygenase genes and the dimethyl sulfide monooxygenase genes. pIO72K was constructed according to replacement of an ampicillin resistance gene on pIO720 by a kanamycin resistance gene. In the case of E. coli JM109 (pIO720) in continuous culture, TCE degradation activity decreased rapidly after continuous culture started, and the remaining number of host cells harboring pIO720 also decreased rapidly. In the case of E. coli JM109 (pIO72K) in continuous culture, TCE degradation activity was stable during continuous culture for at least 300 h and the number of the host cells harboring pIO72K did not decrease. TCE degradation activity of E. coli JM109 (pIO72K) was the highest at a dilution rate of 0.2 h^–1.     

Comparison of optimal conditions for mass production of carboxymethylcellulase by <Emphasis Type="Italic">Escherichia coli</Emphasis> JM109/A-68 with other recombinants in pilot-scale bioreactor

The optimal conditions for mass production of carboxymethylcellulase (CMCase) by E. coli JM109/A-68 were investigated and compared with other E. coli JM109 recombinants producing CMCase. The optimal agitation speed and aeration rate for cell growth of E. coli JM109/A- 68 were 500 rpm and 0.50 vvm in a 7 L bioreactor, whereas those for production of CMCase were 416 rpm and 0.95 vvm. The optimal vessel pressures for cell growth as well as production of CMCase in a 100 L bioreactor were 0.04 MPa. The maximal production of CMCase by E. coli JM109/A-68 under the optimized conditions in a 100 L bioreactor was 11.0 times higher than its wild type, B. velezensis A-68. Optimal conditions for mass production of CMCase by recombinants were different from those for wild strains. The higher production of CMCase by E. coli JM109/A-68 and other recombinant of E. coli seemed to result from its higher cell growth under the optimal conditions for dissolved oxygen and its mixed-growth associated production pattern compared to the growthassociated production of B. velezensis A-68.     

Enhanced production of carboxymethylcellulase of a marine microorganism, Bacillus subtilis subsp. subtilis A-53 in a pilot-scaled bioreactor by a recombinant Escherichia coli JM109/A-53 from rice bran

A gene encoding the carboxymethylcellulase (CMCase) of a marine bacterium, Bacillus subtilis subsp. subtilis A-53, was cloned in Escherichia coli JMB109 and the recombinant strain was named as E. coli JMB109/A-53. The optimal conditions of rice bran, ammonium chloride, and initial pH of the medium for cell growth, extracted by Design Expert Software based on response surface methodology, were 100.0 g/l, 7.5 g/l, and 7.0, respectively, whereas those for production of CMCase were 100.0 g/l, 7.5 g/l, and 8.0. The optimal temperatures for cell growth and the production of CMCase by E. coli JM109/A-53 were found to be and 40 and 35 °C, respectively. The optimal agitation speed and aeration rate of a 7 l bioreactor for cell growth were 400 rpm and 1.5 vvm, whereas those for production of CMCase were 400 rpm and 0.5 vvm. The optimal inner pressure for cell growth was 0.06 MPa, which was the same as that for production of CMCase. The production of CMCase by E. coli JM109/A-53 under optimized conditions was 880.2 U/ml, which was 2.9 times higher than that before optimization. In this study, rice bran and ammonium chloride were developed as carbon and nitrogen source for production of CMCase by a recombinant E. coli JM109/A-53 and the productivity of E. coli JM109/A-53 was 5.9 times higher than that of B. subtilis subp. subtilis A-53.     

Effect of Sucrose Concentration on the Infectivity of ϕX 174 DNA to Protoplast of Escherichia coli

The first step in branched-chain amino acid biosynthesis is catalyzed by acetohydroxyacid synthase (EC 2.2.1.6). This reaction involves decarboxylation of pyruvate followed by condensation with either an additional pyruvate molecule or with 2-oxobutyrate. The enzyme requires three cofactors, thiamine diphosphate (ThDP), a divalent ion, and flavin adenine dinucleotide (FAD). Escherichia coli contains three active isoenzymes, and acetohydroxyacid synthase I (AHAS I) large subunit is encoded by the ilvB gene. In this study, the ilvB gene from E. coli K-12 was cloned into expression vector pETDuet-1, and was expressed in E. coli BL21 (DH3). The purified protein was identified on a 12% SDS–PAGE gel as a single band with a mass of 65 kDa. The optimum temperature, buffer, and pH for E. coli K-12 AHAS I were 37 °C, potassium phosphate buffer, and 7.5. Km values for E. coli K-12 AHAS I binding to pyruvate, Mg⁺², ThDP, and FAD were 4.15, 1.26, 0.2 mM, and 0.61 μM respectively. Inhibition of purified AHAS I protein was determined with herbicides and new compounds.     

Cloning of tryptophanase gene of Alcaligenes faecalis for effective production of l-tryptophan

For the effective production of l-tryptophan from indole and l-serine by the action of tryptophanase from Alcaligenes faecalis, cloning of the enzyme gene (tna) was studied. A. faecalis was transformed not only by broad host range plasmid pKT231 but also by pLG338, pACYC177, and pBR322 derivatives. A recombinant tna plasmid was isolated by shotgun experiments with Escherichia coli K-12, and the isolated tna gene located on the 3.2 kb DNA fragment. Tryptophanase activity of A. faecalis transformed by the tna recombinant plasmid was about 4-fold higher than that of wild cells.     

Construction of a novel recombinant Escherichia coli strain capable of producing 1,3–propanediol and optimization of fermentation parameters by statistical design

Summary The structural gene yqhD from a wild-type Escherichia coli encoding 1,3-propanediol oxidoreductase isoenzyme and the structural gene dhaB from Citrobacter freundii encoding glycerol dehydratase were amplified by using the PCR method. The temperature control expression vector pHsh harboring the yqhD and dhaB genes was transformed into E. coli JM109 to yield the recombinant strain E. coli JM109 (pHsh-dhaB-yqhD). The response surface method (RSM) was then applied to further optimize the fermentation condition of the recombinant strain. A mathematical model was then developed to show the effect of each medium composition and their interactions on the production of 1,3-propanediol by recombinant strain E. coli JM109. The model estimated that a maximal yield of 1,3-propanediol (43.86 g/l) could be obtained when the concentrations of glycerol, yeast extract and vitamin B₁₂ were set at 61.8 g/l, 6.2 g/l and 49 mg/l, respectively; and the fermentation time was 30 h. These predicted values were also verified by validation experiments. Compared with the values obtained by other runs in the experimental design, the optimized medium resulted in a significant increase in the yield of 1,3-propanediol. The yield and productivity under the optimal parameters and process can reach 43.1 g/l and 1.54 g/l/h. Maximum 1,3-propanediol yield of 41.1 g/l was achieved in a 5-l fermenter using the optimized medium. This makes the engineered strain have potential application in the conversion of glycerol to 1,3-propanediol on an industrial scale.     

Construction of a recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis> JM109/A-68 for production of carboxymethylcellulase and comparison of its production with its wild type, <Emphasis Type="Italic">Bacillus velezensis</Emphasis> A-68 in a pilot-scale bioreactor

A gene encoding carboxymethylcellulase (CMCase) of Bacillus velezensis A-68 had been cloned in Escherichia coli JM109. Based on productivity and economic aspect, rice bran and ammonium chloride were chosen to be optimal carbon and nitrogen sources for production of CMCase by E. coli JM109/A-68. The optimal conditions for rice bran, ammonium chloride, and initial pH of medium for production of CMCase were established by the response surface methodology (RSM). The concentrations of four salts in the medium, K₂HPO₄, NaCl, MgSO₄·7H₂O, and (NH₄)₂SO₄, for production of CMCase also were optimized. The optimal temperatures for cell growth and production of CMCase were 37°C. The maximal production of CMCase by E. coli JM109/A-68 was 880.2 U/mL, which was 10.5 time higher than its wild type, B. velezensis A-68. The production of CMCase by E. coli JM109/A-68 was compared with that by B. velezensis A-68 in a 100 L pilot-scale bioreactor under the optimized conditions. The production of CMCase by E. coli JM109/A-68 was found to be the mixed-growth associated unlike the growthassociated production of CMCase by B. velezensis A-68.     

Significantly enhanced production of recombinant nitrilase by optimization of culture conditions and glycerol feeding

The production of a recombinant nitrilase expressed in Escherichia coli JM109/pNLE was optimized in the present work. Various culture conditions and process parameters, including medium composition, inducer, induction condition, pH and temperature, were systematically examined. The results showed that nitrilase production in E. coli JM109/pNLE was greatly affected by the pH condition and the temperature in batch culture, and the highest nitrilase production was obtained when the fermentation was carried out at 37°C, initial pH 7.0 without control and E. coli was induced with 0.2 mM isopropyl-β-d-thiogalactoside at 4.0 h. Furthermore, enzyme production could be significantly enhanced by adopting the glycerol feeding strategy with lower flow rate. The enzyme expression was also authenticated by sodium dodecyl phosphate polyacrylamide gel electrophoresis analysis. Finally, under the optimized conditions for fed-batch culture, cell growth, specific activity and nitrilase production of the recombinant E. coli were increased by 9.0-, 5.5-, and 50-fold, respectively.     

Statistical optimization for production of carboxymethylcellulase of <Emphasis Type="Italic">Bacillus amyloliquefaciens</Emphasis> DL-3 by a recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis> JM109/DL-3 from rice bran using response surface method

The optimal conditions for production of carboxymethylcellulase (CMCase) of Bacillus amyloliquefaciens DL-3 by a recombinant Escherichia coli JM109/DL-3 were established at a flask scale using the response surface method (RSM). The optimal conditions of rice bran, tryptone, and initial pH of the medium for cell growth extracted by Design Expert Software were 66.1 g/L, 6.2 g/L, and 7.2, respectively, whereas those for production of CMCase were 58.0 g/L, 5.0 g/L, and 7.1. The analysis of variance (ANOVA) of results from central composite design (CCD) indicated that significant factor (“probe > F” less than 0.0500) for cell growth was rice bran, whereas those for production of CMCase were rice bran and initial pH of the medium. The optimal temperatures for cell growth and the production of CMCase by E. coli JM109/DL-3 were found to be 37°C. The optimal agitation speed and aeration rate of 7 L bioreactors for cell growth were 498 rpm and 1.4 vvm, whereas those for production of CMCase were 395 rpm and 1.1 vvm. The ANOVA of results indicated that the aeration rate was more significant factor (“probe > F” less than 0.0001) than the agitation speed for cell growth and production of CMCase. The optimal inner pressure for cell growth was 0.08 MPa, whereas that for the production of CMCase was 0.06 MPa. The maximal production of CMCase by E. coli JM109/DL-3 under optimized conditions was 871.0 U/mL, which was 3.0 times higher than the initial production of CMCase before optimization.     

Isolation and Chemical Characterization of a Mating Pheromone Produced by Saccharomyces kluyveri

The pullulanase gene (pul) of Klebsiella aerogenes was transferred in vivo to Escherichia coli by using RP4:: Mu cts. The pul gene was expressed in E. coli, although the level of pullulanase activity in E. coli was lower than that in K. aerogenes, and the Pul⁺ transconjugants were relatively unstable in an unselective medium. Production of pullulanase, which is used to make maltose from starch, was induced in E. coli by pullulan, waxy maize amylopectin, soluble starch and maltose. When the transconjugant cells of E. coli were grown with pullulan or maltose, most pullulanase was produced intracellularly, whereas K. aerogenes produced pullulanase extracellularly. Retransfer of the pul_k gene from E. coli to K. aerogenes by conjugation resulted in an increase of the production of extracellular pullulanase.     

Design and screening of in vivo expressed antimicrobial peptide library

The genetic library of -helical amphipathic peptides, 20 amino acid long, was designed and expressed under the T7 promoter in the E. coli JM109(DE3) and BL21 (DE3). Clones that inhibited the growth of the host cell were screened by the relative size of colonies on the plates. Clones which strongly inhibited growth of Escherichia coli JM109(DE3) were further selected. The method developed in this study is useful for the structure activity relationship study of antimicrobial peptides.     

Peroxyl Radical Scavenging Activity of Caffeic Acid and Its Related Phenolic Compounds in Solution

The esterase gene (est) of Pseudomonas putida MR-2068 was cloned into Escherichia coli JM109. An 8-kb inserted DNA directed synthesis of an esterase in E. coli. The esterase gene was in a 1.1-kb PstI-ClaI fragment within the insert DNA. The complete nucleotides of the DNA fragment containing the esterase gene were sequenced and found to include a single open reading frame of 828 bp coding for a protein of 276 amino acid residues. The open reading frame was confirmed by N-terminal amino acid sequence analysis of the purified esterase. A potential Shine-Dalgarno sequence is followed by the open reading frame. The esterase activity of the recombinant E. coli was more than 200 times higher than that of parental strain, P. putida MR-2068.     

Construction of shuttle vectors derived fromAcetobacter xylinum for cellulose-producing bacteriumAcetobacter xylinum

Summary Shuttle vector pUF106 was constructed by ligation ofAcetobacter xylinum plasmid pFF6 toEscherichia coli plasmid pUC18. It had unique restriction sites suitable for insertion of a foreign DNA fragment and conferred ampicillin resistance to a host. pUF106 transformed cellulose-producingA. xylinum ATCC10245 as well asE. coli JM109.     

Engineering the growth pattern and cell morphology for enhanced PHB production by <Emphasis Type="Italic">Escherichia coli</Emphasis>

E. coli JM109?envC?nlpD deleted with genes envC and nlpD responsible for degrading peptidoglycan (PG) led to long filamentous cell shapes. When cell fission ring location genes minC and minD of Escherichia coli were deleted, E. coli JM109?minCD changed the cell growth pattern from binary division to multiple fissions. Bacterial morphology can be further engineered by overexpressing sulA gene resulting in inhibition on FtsZ, thus generating very long cellular filaments. By overexpressing sulA in E. coli JM109?envC?nlpD and E. coli JM109?minCD harboring poly(3-hydroxybutyrate) (PHB) synthesis operon phbCAB encoded in plasmid pBHR68, respectively, both engineered cells became long filaments and accumulated more PHB compared with the wild-type. Under same shake flask growth conditions, E. coli JM109?minCD (pBHR68) overexpressing sulA grown in multiple fission pattern accumulated approximately 70 % PHB in 9 g/L cell dry mass (CDM), which was significantly higher than E. coli JM109?envC?nlpD and the wild type, that produced 7.6 g/L and 8 g/L CDM containing 64 % and 51 % PHB, respectively. Results demonstrated that a combination of the new division pattern with elongated shape of E. coli improved PHB production. This provided a new vision on the enhanced production of inclusion bodies.     

Motility influences biofilm architecture in Escherichia coli

Eight Escherichia coli strains were studied in minimal medium with a continuous flow system using confocal microscopy. K12 wild-type strains ATCC 25404 and MG1655 formed the best biofilms (∼43 μm thick, 21 to 34% surface coverage). JM109, DH5α, and MG1655 motA formed intermediate biofilms (∼13 μm thick, 41 to 58% surface coverage). BW25113, MG1655 qseB, and MG1655 fliA had poor biofilms (surface coverage less than 5%). The best biofilm-formers, ATCC 25404 and MG1655, displayed the highest motility, whereas the worst biofilm former, BW25113, was motility-impaired. The differences in motility were due to differences in expression of the motility loci qseB, flhD, fliA, fliC, and motA (e.g., qseB expression in MG1655 was 139-fold higher than BW25113 and 209-fold higher than JM109). Motility affected the biofilm architecture as those strains which had poor motility (E. coli JM109, E. coli MG1655 motA, and DH5α) formed flatter microcolonies compared with MG1655 and ATCC 25404, which had more dramatic vertical structures as a result of their enhanced motility. The presence of flagella was also found to be important as qseB and fliA mutants (which lack flagella) had less biofilm than the isogenic paralyzed motA strain (threefold less thickness and 15-fold less surface coverage).     

Cloning of a Gene Encoding Acetate Kinase from Methanosarcina mazei 2-P Isolated from a Japanese Paddy Field Soil

The ack gene encoding acetate kinase from the mesophilic Methanosarcina mazei 2-P, isolated from a paddy field soil in Japan, was cloned, sequenced, and functionally expressed in Escherichia coli. The terminal region of the putative pta gene, probably encoding phosphotransacetylase, was found upstream of the ack gene. The deduced amino acid sequence of the acetate kinase is 86.5% identical to that of the Methanosarcina thermophila acetate kinase. The activity of the His₆-tagged acetate kinase purified from E. coli JM109 was optimal at 35°C. Received: 28 January 2002 / Accepted: 27 February 2002