Stereoselective enzymatic hydrolysis of 2-cyclohexyl-and 2-phenyl-1,3-propanediol diacetate in biphasic systems

Summary A key intermediate (S(–) 2-cyclohexyl-1,3-propanediol monoacetate) was made with high optical purity for the total synthesis of a new angiotensin converting enzyme inhibitor, Fosinopril. The stereoselective hydrolysis of 2-cyclohexyl-1,3-propanediol diacetate (I) and 2-phenyl-1,3-propanediol diacetate (II) was carried out with lipases. Among various lipases evaluated, only porcine pancreatic lipase (PPL) and Chromobacterium viscosum lipase demonstrated efficient conversion and gave the desired enantiomer of monoacetate. In aqueous solution, the desired S(–) monoacetate exhibited an optical purity of 65%–80% (30%–60% enantiomeric excess [e.e.]). However, when the same reactions were conducted in a biphasic system, the product S(–) monoacetate exhibited an optical purity of 99%–100% (98%–100% e.e.). The high purity product was achieved with 65 mol% yield at 1% substrate concentration. Among various solvents evaluated in biphasic systems, efficient hydrolysis was achieved in toluene, cyclohexane, and trichloro-trifluoroethane. The crude PPL was partially purified and two lipase fractions (A and B) were identified. Lipases A and B had a molecular mass of 38 000 and 40 000 daltons, respectively, and both were found to catalyze the hydrolysis of I and II to the appropriate monoacetate in a biphasic system. Offprint requests to: R. N. Patel     

Enantioselective synthesis of ethyl-(S)-3-hydroxy-3-phenylpropanoate (S-HPPE) from ethyl-3-oxo-3-phenylpropanoate using recombinant fatty acid synthase (FAS2) from Kluyveromyces lactis KCTC 7133 in Pichia pastoris GS115

Various yeast strains were examined for the microbial reduction of ethyl-3-oxo-3-phenylpropanoate (OPPE) to ethyl-(S)-3-hydroxy-3-phenylpropanoate (S-HPPE), which is the chiral intermediate for the synthesis of a serotonin uptake inhibitor, Fluoxetine. Kluyveromyces lactis KCTC 7133 was found as the most efficient strain in terms of high yield (83% at 50 mM) and high optical purity ee > 99% of S-HPPE. Based on the protein purification, activity analysis and the genomic analysis, a fatty acid synthase (FAS) was identified as the responsible β-ketoreductase. To increase the productivity, a recombinant Pichia pastoris GS115 over-expressing FAS2 (α-subunit of FAS) of K. lactis KCTC7133 was constructed. In the optimized media condition, the recombinant P. pastoris functionally over-expressed the FAS2. Recombinant P. pastoris showed 2.3-fold higher reductase activity compared with wild type P. pastoris. With the recombinant P. pastoris, the 91% yield of S-HPPE was achieved at 50 mM OPPE maintaining the high optical purity of the product (ee > 99%).     

d-lactic acid production from cellooligosaccharides and β-glucan using l-LDH gene-deficient and endoglucanase-secreting Lactobacillus plantarum

In order to achieve direct fermentation of an optically pure d-lactic acid from cellulosic materials, an endoglucanase from a Clostridium thermocellum (CelA)-secreting plasmid was introduced into an l-lactate dehydrogenase gene (ldhL1)-deficient Lactobacillus plantarum (∆ldhL1) bacterial strain. CelA expression and its degradation of β-glucan was confirmed by western blot analysis and enzyme assay, respectively. Although the CelA-secreting ∆ldhL1 assimilated cellooligosaccharides up to cellohexaose (although not cellotetraose), the main end product was acetic acid, not lactic acid, due to the conversion of lactic acid to acetic acid. Cultivation under anaerobic conditions partially suppressed this conversion resulting in the production of 1.27 g/l of D-lactic acid with a high optical purity of 99.5% from a medium containing 2 g/l of cellohexaose. Subsequently, D-lactic acid fermentation from barley β-glucan was carried out with the addition of Aspergillus aculeatus β-glucosidase produced by recombinant Aspergillus oryzae and 1.47 g/l of D-lactic was produced with a high optical purity of 99.7%. This is the first report of direct lactic acid fermentation from β-glucan and a cellooligosaccharide that is a more highly polymerized sugar than cellotriose.     

Anti-Prelog Reduction of Prochiral Carbonyl Compounds by Oenococcus oeni in a Biphasic System

An aqueous-organic biphasic system was established and used with whole cells of Oenococcus oeni to reduce 2-octanone to (R)-2-octanol. The conversion reached 99% when the Tris/borate buffer was increased from 50 mM to 300 mM in the aqueous phase. In addition, the conversion increased as the log P value of the organic solvent changed from 0.5 to 6.6. Under optimized conditions, the conversion of (R)-2-octanol reached 99% from 0.5 M 2-octanone with an optical purity of 99% e.e. The biphasic system allows the anti-Prelog reduction of aliphatic and aromatic ketones to furnish (R)-configurated alcohols in high optical purity as well.     

Maceration of Plant Tissues by Pectin trans-Eliminase

Methyl (±)-11-(2-hydroxyethyl)thio-6,11-dihydrodibenz[b,e]oxepin-2-carboxylate (5) was enantioselectively acylated with acetic anhydride in an organic medium by Lipase Amano P to give methyl (–)-11-(2-acetoxyethyl)thio-6,11-dihydrodibenz[b,e]oxepin-2-carboxylate (8), and the (+)-enantiomer by Lipase Sigma Type VII. Using Lipase Amano P, (+)- and (–)-(5) could be prepared with high optical purity (84–94% e.e.). These products were respectively converted to (+)- and (–)-KW-4099, which had antiallergic activity with complete retention of the optical purity.     

(S)‐6‐Bromo‐BINOL‐based phosphoramidite ligand with C1 symmetry for enantioselective hydrogenation and allylic substitution

(S)‐6‐Br‐BINOL‐derived phosphoramidite, a s imple monodentate ligand with a stereogenic center at the phosphorus atom, was synthesized for the first time. This stereoselector generated a high level of enantioselectivity (80–95% ee) in the rhodium‐catalyzed hydrogenation of α‐dehydrocarboxylic acid esters and was also successfully employed in the asymmetric palladium‐catalyzed allylic substitution of (E)‐1,3‐diphenylallyl acetate. The optical yield also showed significant dependence with reaction type: up to 70% ee for allylic amination, up to 75% ee for allylic sulfonylation, and up to 90% ee for allylic alkylation. Chirality, 2010. © 2010 Wiley‐Liss, Inc.     

Optical Resolution and Optimization of (R,S)‐Propranolol Using Dehydroabietic Acid Via Diastereomeric Crystallization

The optical resolution of (R,S)‐propranolol by the diastereomeric crystallization method was successfully performed using dehydroabietic acid (DHAA) as the resolving agent in methanol. The three important parameters: DHAA amount, solvent (methanol) amount, and crystallization temperature of diastereomeric salts were optimized employing the response surface methodology (RSM). When maintaining a lower limit of 95% for the purity of (S)‐propranolol, the optimal resolution conditions were a DHAA/(R,S)‐propranolol molar ratio of 1.1, solvent/(R,S)‐propranolol ratio of 16.2 mL.g^‐1, and crystallization temperature of –5 °C. The desired (S)‐propranolol was prepared with 94.8% optical purity and 72.2% yield under the optimal conditions. Chirality 27:131–136, 2015. © 2014 Wiley Periodicals, Inc.     

Stereoselective enzymatic esterification of 3-benzoylthio-2-methylpropanoic acid

Summary A key intermediate, S-(–)-3-benzoylthio-2-methylpropanoic acid (1) was made in high optical purity by the lipase-catalyzed stereoselective esterification of racemic 1 with methanol in an organic solvent system. Among various lipases evaluated, Amano P-30 lipase from Pseudomonas sp. efficiently catalyzed the esterification of 1 to yield R-(+) methyl ester and unreacted S-(–) 1. A reaction yield of 40 mol% and an optical purity of 97.2% were obtained for compound 1 at a substrate concentration of 0.1 m (22 mg/ml). Lipase P-30 was immobilized on Accurel polypropylene (PP) and the immobilized enzyme was reused (23 cycles) in the esterification reaction without loss of enzyme acitivity, productivity or optical purity. Among various solvents evaluated, toluene was found to be the most suitable organic solvent and methanol was the best alcohol for the esterification of racemic 1 by immobilized lipase. Substrate concentrations as high as 1.0 m were used in the esterification reaction. When the temperature was increased from 28° C to 60° C, the reaction time required for the esterification of 0.1 m substrate decreased from 16 h to 2 h. On increasing the methanol to substrate molar ratio from 1:1 to 4:1, the rate of esterification decreased. A lipase fermentation using Pseudomonas sp. ATCC 21 808 was developed. In the batch-fermentation process, 56 units/ml of extracellular lipase activity was obtained. A fed-batch process using soybean oil gave a significant increase in the lipase activity (126 units/ml). Crude lipase recovered from the filtrate by ethanol precipitation and immobilized on Accurel PP was also effective: S-(–) compound 1 was obtained in 35 mol% yield and 95% optical purity. Offsprint requests to: R. N. Patel     

Production of (R)-3-pentyn-2-ol through stereoinversion of racemic 3-pentyn-2-ol by Nocardia fusca AKU 2123

Wet cells of Nocardia fusca AKU 2123 are good catalysts for the production of (R)-3-pentyn-2-ol (PYOH) from (RS)-PYOH through a stereoinversion reaction. Under optimal conditions (350 mM potassium phosphate buffer, pH 8.0, 30% (w/v) wet cells, 0.12% NADPH, 10% glucose, and 30 U/ml glucose dehydrogenase) (R)-PYOH of high optical purity (98.7% e.e.) was produced from 2% (v/v) (RS)-PYOH with a yield of 70.4% by 140 h incubation. Received: 22 January 1999 / Received revision: 23 April 1999 / Accepted: 1 May 1999     

High-yield conversion of (<Emphasis Type="Italic">R</Emphasis>)-2-octanol from the corresponding racemate by stereoinversion using <Emphasis Type="Italic">Candida rugosa</Emphasis>

Whole cells of Candida rugosa catalyzed the conversion of (R)-2-octanol from the corresponding racemate with the optical purity of 97% e.e. and yield of 92% in 10 h. The product was formed through a stereoinversion involving enantioselective oxidation and asymmetric reduction with 2-octanone as the intermediate.Revisions requested 22 September 2004; Revisions received 2 November 2004     

Synthesis of enantiopure (S)-6-chlorochroman-4-ol using whole-cell Lactobacillus paracasei biotransformation

Chromane, which has a fused cyclic structure, is a significant molecule that can be found in the structure of many important compounds. Lactobacillus paracasei BD101 was demonstrated as whole-cell biocatalyst for the synthesis of (S)-6-chlorochroman-4-ol with immense enantioselectivity. The conditions of asymmetric reduction were optimized one factor by one factor using L paracasei BD101 to achieve enantiomerically pure product and complete conversion. Using these obtained optimization conditions, asymmetric reduction of 6-chlorochroman-4-one was performed under environmentally friendly conditions; 6-chlorochroman-4-one, having a fused cyclic structure as previously noted to be difficult to asymmetric reduction with biocatalysts, was enantiomerically reduced to (S)-6-chlorochroman-4-ol with an enantiomeric excess >99% on a high gram scale. This study is the first example in the literature for the enantiopure synthesis of (S)-6-chlorochroman-4-ol using a biocatalyst. Also notably, the optical purity of (S)-6-chlorochroman-4-ol obtained in this study through asymmetric bioreduction using whole-cell biocatalyst is the highest value in the literature. In this study, (S)-6-chlorochroman-4-ol was produced on a gram scale by an easy, inexpensive, and environmentally friendly method, which has shown the production of valuable chiral precursors for drug synthesis and other industrial applications. This study provides a convenient method for the production of (S)-6-chlorochroman-4-ol, which can meet the industrial green production demand of this chiral secondary alcohol.     

Applying slow-release biocatalysis to the asymmetric reduction of ethyl 4-chloroacetoacetate

Amberlite XAD 2 resin enhanced the asymmetric reduction of ethyl 4-chloroacetoacetate (ECA) to S-4-chloro-3-hydroxybutyric acid ethyl ester as catalyzed by Saccharomyces cerevisiae. The absorbed ECA was released slowly to the solution during the reaction so that the substrate inhibition and the spontaneous chemical hydrolysis of ECA were considerably lessened. With 75 g resin l^–1 and ECA at 74 mM, the reaction yield and the product's optical purity increased from 75% to 84% and from 88% to 93%, respectively.     

Chiral syntheses of methyl (R)‐2‐Sulfanylcarboxylic esters and acids with optical purity determination using HPLC

Accessible chiral syntheses of 3 types of (R)‐2‐sulfanylcarboxylic esters and acids were performed: (R)‐2‐sulfanylpropanoic (thiolactic) ester (53%, 98%ee) and acid (39%, 96%ee), (R)‐2‐sulfanylsucciinic diester (59%, 96%ee), and (R)‐2‐mandelic ester (78%, 90%ee) and acid (59%, 96%ee). The present practical and robust method involves (i) clean S_N2 displacement of methanesulfonates of (S)‐2‐hydroxyesters by using commercially available AcSK with tris(2‐[2‐methoxyethoxy])ethylamine and (ii) sufficiently mild deacetylation. The optical purity was determined by the corresponding (2R,5R)‐trans‐thiazolidin‐4‐one and (2S,5R)‐cis‐thiazolidin‐4‐one derivatives based on accurate high‐performance liquid chromatography analysis with high‐resolution efficiency. Compared with the reported method utilizing AcSCs (generated from AcSH and CsCO₃), the present method has several advantages, that is, the use of odorless AcCOSK reagent, reasonable reaction velocity, isolation procedure, and accurate, reliable optical purity determination. The use of accessible AcSK has advantages because of easy‐to‐handle odorless and hygroscopic solid that can be used in a bench‐top procedure. The Ti(OiPr)₄ catalyst promoted smooth trans‐cyclo‐condensation to afford (2R,5R)‐trans‐thiazolidin‐4‐one formation of (R)‐2‐sulfanylcarboxylic esters with available N‐(benzylidene)methylamine under neutral conditions without any racemization, whereas (2S,5R)‐cis‐thiazollidin‐4‐ones were obtained via cis‐cyclo‐condensation and no catalysts. Direct high‐performance liquid chromatography analysis of methyl (R)‐mandelate was also performed; however, the resolution efficiency was inferior to that of the thaizolidin‐4‐one derivatizations.     

Enzymic Resolution of (±)-Acyclic Alcohols via Asymmetric Hydrolysis of Corresponding Acetates by Microorganisms

Asymmetric hydrolysis of (±)-1-pentyl-2-propynyl and 1-pentyl-2-propenyl acetates by selected microorganisms produced chiral 1-octyn-3-ol and 1-octen-3-ol, respectively, with high optical purities and acetates of their antipodes. Enantioselectivity of microbial hydrolysis changed with the microorganisms used. Also, (±)-1-ethylhexyl acetate was asymmetrically hydrolyzed by microorganisms to give (S)-3-octanol and (R)-1-ethylhexyl acetate of relatively low optical purity and hydrolytic ratio, compared with those of (±)-1-pentyl-2-propynyl acetate.     

Optical resolution and enantiomeric purity determination of the analgesic cizolirtine

The optical resolution of (±)‐cizolirtine was accomplished with excellent results (>99% ee) by means of crystallization with (+)‐ or (−)‐di‐p‐toluoyltartaric acid. The optical purity of the samples was controlled by three independent methods: ¹H NMR, capillary electrophoresis (CE) (using β‐cyclodextrins as chiral resolving agents), and HPLC (using a glycoproteic column). The use of a rapid analytical technique like ¹H NMR for estimating the relative amounts of each enantiomer, together with the high sensitivity of CE, afforded a convenient strategy for monitoring the entire process leading to enantiopure compounds. Chirality 11:63–69, 1999. © 1999 Wiley‐Liss, Inc.     

Highly selective anti-Prelog synthesis of optically active aryl alcohols by recombinant Escherichia coli expressing stereospecific alcohol dehydrogenase

Biocatalytic asymmetric synthesis has been widely used for preparation of optically active chiral alcohols as the important intermediates and precursors of active pharmaceutical ingredients. However, the available whole-cell system involving anti-Prelog specific alcohol dehydrogenase is yet limited. A recombinant Escherichia coli system expressing anti-Prelog stereospecific alcohol dehydrogenase from Candida parapsilosis was established as a whole-cell system for catalyzing asymmetric reduction of aryl ketones to anti-Prelog configured alcohols. Using 2-hydroxyacetophenone as the substrate, reaction factors including pH, cell status, and substrate concentration had obvious impacts on the outcome of whole-cell biocatalysis, and xylose was found to be an available auxiliary substrate for intracellular cofactor regeneration, by which (S)-1-phenyl-1,2-ethanediol was achieved with an optical purity of 97%e.e. and yield of 89% under the substrate concentration of 5 g/L. Additionally, the feasibility of the recombinant cells toward different aryl ketones was investigated, and most of the corresponding chiral alcohol products were obtained with an optical purity over 95%e.e. Therefore, the whole-cell system involving recombinant stereospecific alcohol dehydrogenase was constructed as an efficient biocatalyst for highly enantioselective anti-Prelog synthesis of optically active aryl alcohols and would be promising in the pharmaceutical industry.     

Genetic Engineering of Candida utilis Yeast for Efficient Production of L-Lactic Acid

Polylactic acid is receiving increasing attention as a renewable alternative for conventional petroleum-based plastics. In the present study, we constructed a metabolically-engineered Candida utilis strain that produces L-lactic acid with the highest efficiency yet reported in yeasts. Initially, the gene encoding pyruvate decarboxylase (CuPDC1) was identified, followed by four CuPDC1 disruption events in order to obtain a null mutant that produced little ethanol (a by-product of L-lactic acid). Two copies of the L-lactate dehydrogenase (L-LDH) gene derived from Bos taurus under the control of the CuPDC1 promoter were then integrated into the genome of the CuPdc1-null deletant. The resulting strain produced 103.3 g/l of L-lactic acid from 108.7 g/l of glucose in 33 h, representing a 95.1% conversion. The maximum production rate of L-lactic acid was 4.9 g/l/h. The optical purity of the L-lactic acid was found to be more than 99.9% e.e.     

Improved homo <Emphasis Type="SmallCaps">l</Emphasis>-lactic acid fermentation from xylose by abolishment of the phosphoketolase pathway and enhancement of the pentose phosphate pathway in genetically modified xylose-assimilating <Emphasis Type="Italic">Lactococcus lactis</Emphasis>

In order to achieve efficient homo L-lactic acid fermentation from xylose, we first carried out addition of xylose assimilation ability to Lactococcus lactis IL 1403 by introducing a plasmid carrying the xylRAB genes from L. lactis IO-1 (pXylRAB). Then modification of xylose assimilation pathway was carried out. L. lactis has two pathways for xylose assimilation called the phosphoketolase pathway (PK pathway) that produces both lactic acid and acetic acid and the pentose phosphate pathway (PP pathway) that produces only lactic acid as a final product. Thus a mutant strain that disrupted its phosphokeolase gene (ptk) was constructed. The Δptk mutant harboring pXylRAB lacked the PK pathway and produced predominantly lactic acid from xylose via the PP pathway, although its fermentation rate slightly decreased. Further introduction of the transketolase gene (tkt) to disrupted ptk locus led restoration of fermentation rate and this was attributed to enhancement of the PP pathway. As a result, ptk::tkt strain harboring pXylRAB produced 50.1 g/l of L-lactic acid from xylose with a high optical purity of 99.6% and a high yield of 1.58 (moles per mole xylose consumed) that is close to theoretical value of 1.67 from xylose.     

Comparison of Soybean Tissue Extracted with Different Solvents

The enantioselective hydrolysis of (R,S)-3-acetoxymethyl-7,8-difluoro-2,3-dihydro-4H-[1,4]benzoxazine (I) with enzymes was investigated. Optically active I and its hydrolyzate, 7,8-difluoro-2,3-dihydro-3-hydroxymethyl-4H-[1,4]benzoxazine (II), are the intermediates for preparing optically active ofloxacins, whose racemate is known to be an excellent antibacterial agent. Lipoprotein lipase from Pseudomonas fluorescens (LPL Amano 3) was found to predominantly hydrolyze (S)-I, giving (R)-I in 54% e.e. and (R)-II in 44% e.e. On the other hand, lipase from Candida cylindracea was found to predominantly hydrolyze (R)-I, giving (S)-I in 24% e.e. and (S)-II in 20% e.e. Since, the optical purities of I and II thus obtained were not particularly high, these optically active I and II were converted into 3-acetoxymethyl-7,8-difluoro-2,3-dihydro-4-(3,5-dinitrobenzoyl)-4H-[1,4]benzoxazine (IV). After recrystallizing IV from ethyl acetate-hexane, (S)- and (R)-II were obtained with high enantiomeric excess by removing the crystallized racemic IV and subsequently hydrolyzing the resulting optically active IV with alkali. The reduction of II afforded 7,8-difluoro-2,3-dihydro-3-methyl-4H-[1,4]benzoxazine (III), for which the optical purity was estimated to be >96%e.e. by HPLC analysis. (R)- and (S)-ofloxacin were prepared from (R)- and (S)-III with retention of their configuration.     

Lipase-catalyzed asymmetric hydrolysis of 3-phenylglycidic acid ester,the key intermediate in the synthesis of diltiazem hydrochloride

Asymmetric hydrolytic enzymes for trans-3-(4-methoxyphenyl)glycidic acid methyl ester [(±)-MPGM], a key intermediate in the synthesis of diltiazem hydrochloride that is useful as a coronary vasodilator, were screened from 730 microorganisms. Among the microbial enzymes tested, Serratia marcescens lipase had the highest enantioselectivity (E=135) for hydrolysis of (±)-MPGM in a two-phase system using water (pH 8) and a water-immiscible solvent such as toluene. Resolution of (±)-MPGM by S. marcescens lipase gave (2R, 3S)-3-(4-methoxyphenyl)glycidic acid methyl ester [(−)-MPGM] with a reaction yield of 48% and optical purity of >99.9% e.e. After the reaction, the emulsion of toluene and water was separated into two clear layers by the addition of sodium dodecyl sulfate. The crystalline (−)-MPGM was isolated with a yield of over 43% and optical purity of 100% e.e. without column treatment. Diltiazem hydrochloride synthesis using asymmetric hydrolysis of (±)-MPGM was found to be a more efficient process compared to the conventional chemical synthetic process. Some enzymatic characterizations on asymmetric hydrolysis in two-phases of organic solvent-water by S. marcescens lipase were investigated.