High-level heterologous expression of Bacillus halodurans putative xylanase xyn11a (BH0899) in Kluyveromyces lactis

The putative xyn11A structural gene (BH0899) encoding a family-11 xylanase from alkaliphilic Bacillus halodurans strain C-125 was heterologously expressed in the yeast Kluyveromyces lactis CBS 1065 and secreted to a level of 156 microg/ml under selective culture conditions in shake flasks. The Xyn11A production level in shake flask cultures of K. lactis CBS 1065 was higher than that reported for other xylanase genes placed under the control of the regulated LAC4 promoter on a plasmid containing an entire sequence of pKD1 from Kluyveromyces drosophilarium. Recombinant Xyn11A was highly active over pH range from 3 to 10, with maximal activity around pH 7. The enzyme showed a specific activity of 628 U/mg-protein on birchwood xylan as substrate, but no cellulase or beta-xylosidase activity.     

Production in <Emphasis Type="Italic">Trichoderma reesei</Emphasis> of three xylanases from <Emphasis Type="Italic">Chaetomium thermophilum</Emphasis>: a recombinant thermoxylanase for biobleaching of kraft pulp

Three endoxylanase genes were cloned from the thermophilic fungus Chaetomium thermophilum CBS 730.95. All genes contained the typical consensus sequence of family 11 glycoside hydrolases. Genomic copies of Ct xyn11A, Ct xyn11B, and Ct xyn11C were expressed in the filamentous fungus T. reesei under the control of the strong T. reesei cel7A (cellobiohydrolase 1, cbh1) promoter. The molecular masses of the Ct Xyn11A, Ct Xyn11B, and Ct Xyn11C proteins on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) were 27, 23, and 22 kDa, respectively. Ct Xyn11A was produced almost as efficiently as the homologous xylanase II from a corresponding single-copy transformant strain. Ct Xyn11B production level was approximately half of that of Ct Xyn11A. The amount of Ct Xyn11C was remarkably lower. Ct Xyn11A had the highest temperature optimum and stability of the recombinant xylanases and the highest activity at acid-neutral pH (pH 5–7). It was the most suitable for industrial bleaching of kraft pulp at high temperature.     

Codon-optimized expression and characterization of a pH stable fungal xylanase in Pichia pastoris

Novel xylanase (EC 3.2.1.8) is in great demand due to its industrial significance. In this study, we have developed and characterized a novel xylanase-producing yeast strain. This mature xylanase gene xyn11A consists of 870 base pairs and belongs to GH11 family. The gene sequence was optimized and synthesized, and was then cloned into yeast vector pGAPZαA under the control of the constitutive GAP promoter. SDS-PAGE analysis indicates that Xyn11A is extracellularly expressed as a glycosylated protein in P. pastoris. Xyn11A is optimally active at 70 °C and pH 7.4. This xylanase retained more than 90% of its activity after incubation at 50 °C and 60 °C for up to 1 h. Xyn11A is also stable over a wide range of pH (2.0–11.0). Most metal ions tested such as copper (Cu²⁺) and lead (Pb²⁺) have little inhibitory effects on Xyn11A. It is also resistant to pepsin and proteinase K digestion, retaining 80% and 90% of its activity after digestion at 37 °C for 1 h, respectively. Those superior properties make Xyn11A a robust xylanase with great potential for industrial use. To the best of our knowledge, this is the first report of xylanase from the fungus Corynascus thermophilus.     

Xyn11E from Paenibacillus barcinonensis BP-23: a LppX-chaperone-dependent xylanase with potential for upgrading paper pulps

A new xylanase from Paenibacillus barcinonensis BP-23, Xyn11E, has been identified and characterized. Xyn11E has been cloned and heterologously expressed in Escherichia coli. It is a single-domain xylanase belonging to the family 11 of glycosyl hydrolases (GH11) with a predicted molecular weight of 20.652 kDa and an isoelectric point (pI) of 8.7. Substrate specificity, kinetic properties, and mode of action of the purified xylanase were characterized. Xyn11E exhibited high activity toward branched xylans, being beechwood xylan the preferred substrate. The optimum pH and temperature of the purified enzyme were 6.5 and 50 °C, respectively. Catalytic constants were determined on beechwood xylan, on which Xyn11E showed a Km of 12.98 mg/ml and a Vmax of 3,023 U/mg. The enzyme hydrolyzed long xylooligosaccharides, while oligomers shorter than xylotetraose were not degraded. Products released from glucuronoxylans were shorter than those liberated from cereal arabinoxylans. The xylanase was dependent on P. barcinonensis BP-23 LppX for its expression in an active form. Coexpression of Xyn11E with E. coli chaperones could not replace the need of LppX, which seems to act as a specific chaperone for Xyn11E correct folding. Activity of the enzyme on bleached pulps was evaluated. Xyn11E liberated reducing sugars from ECF and TCF pulps from eucalyptus, sisal, and flax, which makes it a good candidate for the enzymatic-assisted production of high-cellulose-content pulps from paper-grade pulps.     

Characterization of a thermostable xylanase from an alkaliphilic Bacillus sp.

A xylanase gene (xyn10) from alkaliphilic Bacillus sp. N16-5 was cloned and expressed in Pichia pastoris. The deduced amino acid sequence has 85% identity with xylanase xyn10A from B. halodurans and contains two potential N-glycosylation sites. The glycosylated Xyn10 with MW 48 kDa can hydrolyze birchwood and oatspelt xylan. The enzyme had optimum activity at pH 7 and 70°C, with the specific activity of 92.5U/mg. The Xyn10 retained over 90% residual activity at 60°C for 30 min but lost all activity at 80°C over 15 min. Most tested ions showed no or slight inhibition effects on enzyme activity.     

Cloning, expression and characterization of a novel salt-tolerant xylanase from Bacillus sp. SN5

A xylanase gene (xyn10A) was cloned from Bacillus sp. SN5 and expressed in Escherichia coli. It encoded a 348-residue polypeptide of ~45?kDa. The deduced amino acid sequence had 68?% identity with the endo-1,4-beta-xylanase from Paenibacillus lactis 154 that belonged to family 10 of the glycoside hydrolases. Purified recombinant Xyn10A had maximum activity at 40?°C and pH 7.0, with the specific activity of 105?U/mg and a Km of 0.6?mg/ml for beechwood xylan. Xyn10A retained more than 80?% activity between 25 and 45?°C and 29?% activity at 5?°C. It exhibited the highest activity (134?%) in 0.5?M NaCl and still retained 90?% activity in 2.5?M NaCl. It retained about 87?% activity after incubation in 2?M NaCl for 24?h. The cold-active and halo-tolerant properties of Xyn10A make it promising for application in the food industry, especially in the processing of saline food and sea food.     

A third xylanase from Trichoderma reesei PC-3-7

A third xylanase (Xyn III) from Trichoderma reesei PC-3–7 was purified to electrophoretic homogeneity by gel filtration and ion-exchange chromatographies. The enzyme had a molecular mass of 32 kDa, and its isoelectric point was 9.1. The pH optimum of Xyn III was 6.0, similar to that of Xyn II, another basic xylanase of  T. reesei. The purified Xyn III showed high activity with birchwood xylan but no activity with cellulose and aryl glycoside. The hydrolysis of birchwood xylan by Xyn III produced mainly xylobiose, xylotriose and other xylooligosaccharides. The amino acid sequences of the N-terminus and internal peptides of Xyn III exhibited high homology with the family F xylanases, showing that they were distinct from those of Xyn I and Xyn II of  T. reesei, which belong to family G. These results reveal that Xyn III is a new specific endoxylanase, differing from Xyn I and Xyn II in  T. reesei. It is noteworthy that this novel xylanase was induced only by cellulosic substrates and l-sorbose but not by xylan and its derivarives. Furthermore,  T. reesei PC-3-7 produced Xyn III in quantity when grown on Avicel or lactose as a carbon source, while  T. reesei QM9414 produced little or no Xyn III. Received: 7 November 1997 / Received last revision: 2 February 1988 / Accepted: 23 February 1998     

Characterization of thermostable Xyn10A enzyme from mesophilic Clostridium acetobutylicum ATCC 824

A thermostable xylanase gene, xyn10A (CAP0053), was cloned from Clostridium acetobutylicum ATCC 824. The nucleotide sequence of the C. acetobutylicum xyn10A gene encoded a 318-amino-acid, single-domain, family 10 xylanase, Xyn10A, with a molecular mass of 34 kDa. Xyn10A exhibited extremely high (92%) amino acid sequence identity with Xyn10B (CAP0116) of this strain and had 42% and 32% identity with the catalytic domains of Rhodothermus marinus xylanase I and Thermoascus aurantiacus xylanase I, respectively. Xyn10A enzyme was purified from recombinant Escherichia coli and was highly active toward oat-spelt and Birchwood xylan and slightly active toward carboxymethyl cellulose, arabinogalactouronic acid, and various p-nitrophenyl monosaccharides. Xyn10A hydrolyzed xylan and xylooligosaccharides larger than xylobiose to produce xylose. This enzyme was optimally active at 60°C and had an optimum pH of 5.0. This is one of a number of related activities encoded on the large plasmid in this strain.     

Characterization of Xyn10A, a highly active xylanase from the human gut bacterium Bacteroides xylanisolvens XB1A

A xylanase gene xyn10A was isolated from the human gut bacterium Bacteroides xylanisolvens XB1A and the gene product was characterized. Xyn10A is a 40-kDa xylanase composed of a glycoside hydrolase family 10 catalytic domain with a signal peptide. A recombinant His-tagged Xyn10A was produced in Escherichia coli and purified. It was active on oat spelt and birchwood xylans and on wheat arabinoxylans. It cleaved xylotetraose, xylopentaose, and xylohexaose but not xylobiose, clearly indicating that Xyn10A is a xylanase. Surprisingly, it showed a low activity against carboxymethylcellulose but no activity at all against aryl-cellobioside and cellooligosaccharides. The enzyme exhibited K _m and V _max of 1.6 mg ml⁻¹ and 118 μmol min⁻¹ mg⁻¹ on oat spelt xylan, and its optimal temperature and pH for activity were 37°C and pH 6.0, respectively. Its catalytic properties (k _cat/K _m = 3,300 ml mg⁻¹ min⁻¹) suggested that Xyn10A is one of the most active GH10 xylanase described to date. Phylogenetic analyses showed that Xyn10A was closely related to other GH10 xylanases from human Bacteroides. The xyn10A gene was expressed in B. xylanisolvens XB1A cultured with glucose, xylose or xylans, and the protein was associated with the cells. Xyn10A is the first family 10 xylanase characterized from B. xylanisolvens XB1A.     

Identification and characterization of novel cellulolytic and hemicellulolytic genes and enzymes derived from German grassland soil metagenomes

Soil metagenomes represent an unlimited resource for the discovery of novel biocatalysts from soil microorganisms. Three large-inserts metagenomic DNA libraries were constructed from different grassland soil samples and screened for genes conferring cellulase or xylanase activity. Function-driven screening identified a novel cellulase-encoding gene (cel01) and two xylanase-encoding genes (xyn01 and xyn02). From sequence and protein domain analyses, Cel01 (831 amino acids) belongs to glycoside hydrolase family 9 whereas Xyn01 (170 amino acids) and Xyn02 (255 amino acids) are members of glycoside hydrolase family 11. Cel01 harbors a family 9 carbohydrate-binding module, previously found only in xylanases. Both Xyn01 and Xyn02 were most active at 60°C with high activities from 4 to 10 and optimal at pH 7 (Xyn01) and pH 6 (Xyn02). The cellulase gene, cel01, was expressed in E. coli BL21 and the recombinant enzyme (91.9 kDa) was purified. Cel01 exhibited high activity with soluble cellulose substrates containing β-1,4-linkages. Activity with microcrystalline cellulose was not detected. These data, together with the analysis of the degradation profiles of carboxymethyl cellulose and barley glucan indicated that Cel01 is an endo 1,4-β-glucanase. Cel01 showed optimal activity at 50°C and pH 7 being highly active from pH range 5 to 9 and possesses remarkable halotolerance.     

The Botrytis cinerea xylanase Xyn11A contributes to virulence with its necrotizing activity,not with its catalytic activity

Background  

The Botrytis cinerea xylanase Xyn11A has been previously shown to be required for full virulence of this organism despite its poor contribution to the secreted xylanase activity and the low xylan content of B. cinerea hosts. Intriguingly, xylanases from other fungi have been shown to have the property, independent of the xylan degrading activity, to induce necrosis when applied to plant tissues, so we decided to test the hypothesis that secreted Xyn11A contributes to virulence by promoting the necrosis of the plant tissue surrounding the infection, therefore facilitating the growth of this necrotroph.     

High activity xylanase production by Streptomyces olivaceoviridis E-86

The effects of different factors on xylanase production by Streptomyces olivaceoviridis E-86 were studied under shake flask conditions. The best initial pH value of growth medium for xylanase production was pH 6.0. Corn cob xylan and beef peptone were the best C source and N source, respectively. The enzyme activity was doubled by addition of 1.5% (v/v) Tween-80 in the medium. By the combination of the above variables, the highest xylanase activity obtained was 1653 U/ml which is the highest ever reported from Streptomyces sp.     

Physiological diversity within the <Emphasis Type="Italic">kluyveromyces marxianus</Emphasis> species

The Kluyveromyces marxianus strains CBS 6556, CBS 397 and CBS 712^T were cultivated on a defined medium with either glucose, lactose or sucrose as the sole carbon source, at 30 and 37°C. The aim of this work was to evaluate the diversity within this species, in terms of the macroscopic physiology. The main properties evaluated were: intensity of the Crabtree effect, specific growth rate, biomass yield on substrate, metabolite excretion and protein secretion capacity, inferred by measuring extracellular inulinase activity. The strain Kluyveromyces lactis CBS 2359 was evaluated in parallel, since it is the best described Kluyveromyces yeast and thus can be used as a control for the experimental setup. K. marxianus CBS 6556 presented the highest specific growth rate (0.70 h⁻¹) and the highest specific inulinase activity (1.65 U mg⁻¹ dry cell weight) among all strains investigated, when grown at 37°C with sucrose as the sole carbon source. The lowest metabolite formation and highest biomass yield on substrate (0.59 g dry cell weight g sucrose⁻¹) was achieved by K. marxianus CBS 712^T at 37°C. Taken together, the results show a systematic comparison of carbon and energy metabolism among three of the best known K. marxianus strains, in parallel to K. lactis CBS 2359.     

Engineering hyperthermostability into a mesophilic family 11 xylanase from Aspergillus oryzae by in silico design of N‐terminus substitution

A mesophilic xylanase from Aspergillus oryzae CICC40186 (abbreviated to AoXyn11A) belongs to glycoside hydrolase family 11. The thermostability of AoXyn11A was significantly improved by substituting its N‐terminus with the corresponding region of a hyperthermostable family 11 xylanase, EvXyn11^TS. The suitable N‐terminus of AoXyn11A to be replaced was selected by the comparison of B‐factors between AoXyn11A and EvXyn11^TS, which were generated and calculated after a 15 ns molecular dynamic (MD) simulation process. Then, the predicted hybrid xylanase (designated AEx11A) was modeled, and subjected to a 2 ns MD simulation process for calculating its total energy value. The N‐terminus substitution was confirmed by comparing the total energy value of AEx11A with that of AoXyn11A. Based on the in silico design, the AEx11A was constructed and expressed in Pichia pastoris GS115. After 72 h of methanol induction, the recombinant AEx11A (reAEx11A) activity reached 82.2 U/mL. The apparent temperature optimum of reAEx11A was 80°C, much higher than that of reAoXyn11A. Its half‐life was 197‐fold longer than that of reAoXyn11A at 70°C. Compared with reAoXyn11A, the reAEx11A displayed a slight alteration in K_m but a decrease in V_max. Biotechnol. Bioeng. 2013; 110: 1028–1038. © 2012 Wiley Periodicals, Inc.     

Purification and characterization of a multienzyme complex produced by Paenibacillus curdlanolyticus B-6

Paenibacillus curdlanolyticus B-6 showed effective degradation activities for xylan and cellulose and produced an extracellular multienzyme complex (approximately 1,450 kDa) containing several xylanases and cellulases. To characterize the multienzyme complex, we purified the complex from culture supernatants by four kind of chromatography. The purified multienzyme complex was composed of a 280-kDa protein with xylanase activity, a 260-kDa protein that was a truncated form on the C-terminal side of the 280-kDa protein, two xylanases of 40 and 48 kDa, and 60 and 65 kDa proteins having both xylanase and carboxymethyl cellulase activities. The 280-kDa protein resembled the scaffolding proteins of cellulosomes based on its migratory behavior in polyacrylamide gels and as a glycoprotein. Cloning of the 40-kDa major xylanase subunit named Xyn11A revealed that Xyn11A contained two functional domains which belonged to glycosyl hydrolase family-11 and to carbohydrate-binding module family-36, respectively, and a glycine- and asparagine-rich linker. However, an amino acid sequence similar to a dockerin domain, which is crucial to cellulosome assembly, was not found in Xyn11A. These results suggest that the multienzyme complex produced by P. curdlanolyticus B-6 should assemble by a mechanism distinct from the cohesin-dockerin interactions known in cellulosomes.     

Heterologous expression of glucose oxidase in the yeast <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis>

Background  

In spite of its advantageous physiological properties for bioprocess applications, the use of the yeast Kluyveromyces marxianus as a host for heterologous protein production has been very limited, in constrast to its close relative Kluyveromyces lactis. In the present work, the model protein glucose oxidase (GOX) from Aspergillus niger was cloned into K. marxianus CBS 6556 and into K. lactis CBS 2359 using three different expression systems. We aimed at verifying how each expression system would affect protein expression, secretion/localization, post-translational modification, and biochemical properties.     

Optimizing secretory expression of recombinant human interferon gamma from Kluyveromyces lactis

Biosimilar/biotherapeutic production is becoming a major area of focus for a big chunk of biotechnology industry. Easy licensing and already approved status for clinical use have given it a boost. In the present study, recombinant human interferon gamma (IFNG) was expressed for the first time in Kluyveromyces lactis expression system and its expression was optimized by varying growth parameters and carbon source concentration with the aim of increasing recombinant protein production level. Human IFNG gene was cloned in the genomic DNA of K. lactis by homologous recombination and under unoptimized conditions in shake flask, IFNγ protein was secreted in the fermentation medium at a level of 175?µg/L quantified by ELISA assay. After the optimization of expression conditions using one-variable-at-a-time technique, expression level was enhanced by 2.2-folds. Substrate inhibition studies revealed that up to 80?g/L of lactose is well tolerated by K. lactis cells for its growth but more than 80?g/L of lactose causes remarkable reduction in biomass production.     

High levels of inducible expression of cloned β-galactosidase ofKluyveromyces lactis inSaccharomyces cerevisiae

Summary The LAC4 gene ofKluyveromyces lactis CBS2360 coding for -galactosidase was isolated from aK. lactis gene bank. The gene was when cloned in a yeast expression vector pBCL26, derived from pLG2 (Guarente 1983), under the control of the inducible GAL1-10 USA/CYC1 yeast hybrid promoter. Two constructions were obtained, pBCLG2 and pBCLG4, that bear the LAC4 gene in the two opposite orientations and we have studied the expression ofK. lactis -galactosidase in yeast cells transformed with these two plasmids and under different growth conditions. High levels of expression induced by galactose were observed with pBCLG2, which bears the LAC4 gene in the correct orientation, while a low constitutive level of expression was observed in pBCLG4 transformants both in glucose and in galactose media. The expression of the heterologous protein, under induced conditions, appears to be strongly influenced by the growth phase of the culture, with a sharp increase of the specific activity of the enzyme and of its level, calculated as percent of total protein, at the beginning of the stationary phase of growth, during which time the -galactosidase reaches a level of 15% of total cellular protein.