A highly thermostable endo-(1,4)-β-mannanase from the marine bacterium Rhodothermus marinus

Rhodothermus marinus ATCC 43812, a thermophilic bacterium isolated from marine hot springs, possesses hydrolytic activities for depolymerising substrates such as carob-galactomannan. Screening of expression libraries identified mannanase-positive clones. Subsequently, the corresponding DNA sequences were determined, eventually identifying a coding sequence specifying a 997 amino acid residue protein of 113 kDa. Analyses revealed an N-terminal domain of unknown function and a C-terminal mannanase domain of 550 amino acid residues with homology to known mannanases of glycosidase family 26. Action pattern analysis categorised the R. marinus mannanase as an endo-acting enzyme with a requirement for at least five sugar moieties for effective catalytic activity. When expressed in Escherichia coli, purified gene product with catalytic activity was mainly found as two protein fragments of 45 kDa and 50 kDa. The full-length protein of 113 kDa was only detected in crude extracts of R. marinus, while truncated protein-containing fractions of the original source resulted in a major active protein of 60 kDa. Biochemical analysis of the mannanase revealed a temperature and pH optimum of 85 °C and pH 5.4, respectively. Purified, E. coli-produced protein fragments showed high heat stability, retaining more than 70% and 25% of the initial activity after 1 h incubation at 70 °C and 90 °C, respectively. In contrast, R. marinus-derived protein retained 87% activity after 1 h at 90 °C. The enzyme hydrolysed carob-galactomannan (locust bean gum) effectively and to a smaller extent guar gum, but not yeast mannan. Received: 5 November 1999 / Received revision: 19 January 2000 / Accepted: 23 January 2000     

Rotihibin A,a Novel Plant Growth Regulator,from Streptomyces sp.

A thermophilic Thermoactinomyces sp. E79 producing a highly thermostable alkaline protease was isolated from soil. The protease, produced extracellularly by Thermoactinomyces sp. E79, was purified by DEAE-Sepharose CL-6B and Butyl-Toyopearl 650M column chromatography. The relative molecular mass was estimated to be 31,000 by SDS–polyacrylamide gel electrophoresis. Enzyme activity was inhibited by phenylmethylsulfonyl fluoride, suggesting the enzyme to be a serine protease. The optimum temperature for the enzyme activity was 85°C, and about 50% of the original activity remained after incubation at 90°C for 10 min in the presence of Ca^{2 +} . The optimum pH for the enzyme activity was 11.0 and the enzyme was fairly stable from pH 5.0 to 12.0. The gene for this thermostable alkaline protease was cloned in Escherichia coli and the expressed intracellular enzyme was activated by heat treatment. Sequence analysis showed an open reading frame of 1,152 base pairs, coding for a poiypeptide of 384 amino acids. The polypeptide was composed of a signal sequence (25 amino acids), a prosequence (81 amino acids), and a mature protein of 278 amino acids. The deduced amino acid sequence of the mature protease had high similarity with thermitase, a serine protease from Thermoactinomyces vulgaris, and the extent of sequence identity was 76%.     

Characterisitics and Gene Cloning of Phospholipase D of the Psychrophile,Shewanella sp.

Phospholipase D, with a molecular mass of 64 kDa, was purified from the psychrophile, Shewanella sp. The enzyme showed maximal activity at pH 7.8 and 40 °C in the presence of the Ca²⁺-ion, and its activity at 10 °C was 6.5% of maximum. The enzyme exhibited high activity to the non-micelle form of phosphatidylcholine in an aqueous solution containing water miscible alcohols such as methanol, ethanol, iso-propanol, and n-propanol. Nucleotide sequencing of the enzyme gene yielded a deduced amino acid sequence, which showed 36.2% identity to that of Streptomyces chromofuscus phopsholipase D alone. The low sequence similarity to other phopsholipase D enzymes suggests that the purified enzyme might be a novel phospholipase D.     

Biochemical and phylogenetic characterization of isocitrate dehydrogenase from a hyperthermophilic archaeon, Archaeoglobus fulgidus

A thermostable homodimeric isocitrate dehydrogenase from the hyperthermophilic sulfate-reducing archaeon Archaeoglobus fulgidus was purified and characterized. The mol. mass of the isocitrate dehydrogenase subunit was 42 kDa as determined by SDS-PAGE. Following separation by SDS-PAGE, A. fulgidus isocitrate dehydrogenase could be renatured and detected in situ by activity staining. The enzyme showed dual coenzyme specificity with a high preference for NADP⁺. Optimal temperature for activity was 90° C or above, and a half-life of 22 min was found for the enzyme when incubated at 90° C in a 50 mM Tricine-KOH buffer (pH 8.0). Based on the N-terminal amino acid sequence, the gene encoding the isocitrate dehydrogenase was cloned. DNA sequencing identified the icd gene as an open reading frame encoding a protein of 412 amino acids with a molecular mass corresponding to that determined for the purified enzyme. The deduced amino acid sequence closely resembled that of the isocitrate dehydrogenase from the archaeon Caldococcus noboribetus (59% identity) and bacterial isocitrate dehydrogenases, with 57% identity with isocitrate dehydrogenase from Escherichia coli. All the amino acid residues directly contacting substrate and coenzyme (except Ile-320) in E. coli isocitrate dehydrogenase are conserved in the enzyme from A. fulgidus. The primary structure of A. fulgidus isocitrate dehydrogenase confirmes the presence of Bacteria-type isocitrate dehydrogenases among Archaea. Multiple alignment of all the available amino acid sequences of di- and multimeric isocitrate dehydrogenases from the three domains of life shows that they can be divided into three distinct phylogenetic groups. Received: 6 February 1997 / Accepted: 12 June 1997     

Characterization of cold-active uracil-DNA glycosylase from Bacillus sp. HJ171 and its use for contamination control in PCR

In this study, the gene encoding Bacillus sp. HJ171 uracil-DNA glycosylase (Bsp HJ171 UDG) was cloned and sequenced. The Bsp HJ171 UDG gene consists of a 738-bp DNA sequence, which encodes for a protein that is 245-amino-acid residues in length. The deduced amino acid sequence of the Bsp HJ171 UDG had a high sequence similarity with other bacterial UDGs. The molecular mass of the protein derived from this amino acid sequence was 27.218 kDa. The Bsp HJ171 UDG gene was expressed under the control of a T7lac promoter in the pTYB1 plasmid in Escherichia coli BL21 (DE3). The expressed enzyme was purified in one step using the Intein Mediated Purification with an Affinity Chitin-binding Tag purification system. The optimal temperature range, pH, NaCl concentration, and KCl concentration of the purified enzyme was 20–25°C, 8.0, 25 and 25 mM, respectively. The half-life of the enzyme at 40°C and 50°C were approximately 131 and 45 s, respectively. These heat-labile characteristics enabled Bsp HJ171 UDG to control carry-over contamination in the polymerase chain reaction product (PCR) without losing the PCR product. G.A. Kim and M.S. Lee contributed equally to this work.     

Cloning, sequencing, and expression of a β-1,4-endoxylanase gene from Indonesian Bacillus licheniformis strain I5 in Escherichia coli

The gene encoding an endo-β-1,4-xylanase from an Indonesian indigenous Bacillus licheniformis strain I5 was amplified using PCR, cloned, and expressed in Escherichia coli. The nucleotide sequence of a 642 bp DNA fragment was determined, revealing one open reading frame that encoded a xylanase. Based on the nucleotide sequence, calculated molecular mass of the enzyme was 23 kDa. This xylanase has a predicted typical putative signal peptide; however, in E. coli, the active protein was located mainly in intracellular form. Neither culture supernatant of recombinant E. coli nor periplasmic fraction has significantly detectable xylanase activity. The deduced amino acid of the gene has 91% identity with that of Bacillus subtilis endoxylanase. Optimal activity of the recombinant enzyme was at pH 7 and 50°C     

Increasing the thermostability of Flavobacterium meningosepticum glycerol kinase by changing Ser329 to Asp in the subunit interface region.

The thermostability enhancement of Flavobacterium meningosepticum glycerol kinase (FGK) by random mutagenesis in the subunit interface region was investigated. A single Escherichia coli transformant, which produced a more thermostable glycerol kinase than the parent enzyme, was obtained. The nucleotide sequence of the gene of the mutant enzyme (FGK2615) was determined, and the four amino acid replacements were identified as Glu327 to Asp, Ser329 to Asp, Thr330 to Ala and Ser334 to Lys. Although the properties of FGK2615 were fundamentally similar to those of the parent enzyme, the thermostability and Km for ATP had changed. The thermostability of FGK2615 was apparently increased; the temperature at which the enzyme activity is inactivated by 50% for a 30-min incubation of FGK2615 was determined to be 72.1 degrees C which was 3.1 degrees C higher than that of the parent FGK. Four additional mutants each having a single amino acid replacement (Glu327 to Asp, Ser329 to Asp, Thr330 to Ala and Ser334 to Lys) were prepared and their thermostability and Km for substrates were evaluated. The effect of the substitution of Ser329 to Asp is discussed.     

Identification and Molecular Characterization of a Novel Type of α-galactosidase from Pyrococcus furiosus

An α-galactosidase gene from Pyrococcus furiosus was identified, cloned and functionally expressed in Escherichia coli. It is the first α-galactosidase from a hyperthermophilic archaeon described to date. The gene encodes a unique amino acid sequence compared to other α-galactosidases. Highest homology was found with α-amylases classified in family 57 of glycoside hydrolases. The 364 amino acid protein had a calculated mass of 41.6 kDa. The recombinant α-galactosidase specifically catalyzed the hydrolysis of para-nitrophenyl-α-galactopyranoside, and to some extent that of melibiose and raffinose. The enzyme proved to be an extremely thermo-active and thermostable α-galactosidase with a temperature optimum of 115°C and a half-life time of 15 hours at 100°C. The pH optimum is between 5.0 and 5.5. Sequence analysis showed four conserved carboxylic residues. Site-directed mutagenesis was applied to identify the potential catalytic residues. Glu117Ala showed decreased enzyme activity, which could be rescued by the addition of azide or formate. It is concluded that glutamate 117 is the catalytic nucleophile, whereas the acid/base catalyst remains to be identified.     

A new xylanase from thermoalkaline <Emphasis Type="Italic">Anoxybacillus</Emphasis> sp. E2 with high activity and stability over a broad pH range

A xylanase gene, xynE2, was cloned from thermoalkaline Anoxybacillus sp. E2 and was expressed in Escherichia coli BL21 (DE3). The gene consisted of 987 bp and encoded a 328-residue xylanase with a calculated molecular weight of 38.8 kDa. On the basis of amino acid sequence similarities, this enzyme was assigned as a member of glycoside hydrolase family 10. Purified recombinant XynE2 showed maximal activity at pH 7.8 and 65°C, and was thermostable at 60°C. The enzyme was highly active and stable over a broad pH range, showing more than 90% of maximal activity at pH 6.6–pH 8.6 and retaining more than 80% of activity at pH 4.6–pH 12.0, 37°C for 1 h, respectively. These favorable properties make XynE2 a good candidate in the pulp and paper industries. This is the first report on gene cloning, expression and characterization of a xylanase from the genus Anoxybacillus.     

Molecular cloning, sequencing, and expression of the heat-labile uracil-DNA glycosylase from a marine psychrophilic bacterium, strain BMTU3346

The gene encoding a heat-labile uracil-DNA glycosylase (UDG) from a psychrophilic, gram-positive marine strain (BMTU3346) has been cloned, sequenced, and expressed in Escherichia coli. The UDG is a cold-active enzyme with an apparent temperature optimum of 35°C and a half-life of 2 min at 40°C. The amino acid sequence shows an identity of 39.1%–46.2% to UDGs from mesophilic bacteria. The primary structure was examined for features that could be related to the thermolability of the enzyme. The amino acid sequence of the heat-labile UDG shows 22 differences with respect to the consensus sequence derived from bacterial UDGs. Features previously recognized in cold-active enzymes such as extended surface loops or a decrease in the number of arginine residues or proline residues in loops were not observed. Because dominant features that could be related to the thermolability of the UDG from BMTU3346 cannot be identified, more subtle modifications of the conformation seem to be responsible for its thermolability. Received: June 30, 1999 / Accepted: November 12, 1999     

Cloning and functional expression of a nitrile hydratase (NHase) from Rhodococcus equi TG328-2 in Escherichia coli, its purification and biochemical characterisation

The nitrile hydratase (NHase, EC 4.2.1.84) genes (α and β subunit) and the corresponding activator gene from Rhodococcus equi TG328-2 were cloned and sequenced. This Fe-type NHase consists of 209 amino acids (α subunit, M_r 23 kDa) and 218 amino acids (β subunit, M_r 24 kDa) and the NHase activator of 413 amino acids (M_r 46 kDa). Various combinations of promoter, NHase and activator genes were constructed to produce active NHase enzyme recombinantly in E. coli. The maximum enzyme activity (844 U/mg crude cell extract towards methacrylonitrile) was achieved when the NHase activator gene was separately co-expressed with the NHase subunit genes in E. coli BL21 (DE3). The overproduced enzyme was purified with 61% yield after French press, His-tag affinity chromatography, ultrafiltration and lyophilization and showed typical Fe-type NHase characteristics: besides aromatic and heterocyclic nitriles, aliphatic ones were hydrated preferentially. The purified enzyme had a specific activity of 6,290 U/mg towards methacrylonitrile. Enantioselectivity was observed for aromatic compounds only with E values ranging 5–17. The enzyme displayed a broad pH optimum from 6 to 8.5, was most active at 30°C and showed the highest stability at 4°C in thermal inactivation studies between 4°C and 50°C.     

Cloning, expression and characterization of l-aspartate β-decarboxylase gene from Alcaligenes faecalis CCRC 11585

l -Aspartate β-decarboxylase (Asd) is an important enzyme to produce l-alanine and d-aspartate. The genomic library of Alcaligenes faecalis CCRC 11585 was cloned into pBK-CMV and transformed into Escherichia coli. One clone, which carried the asd gene and expressed Asd activity, was isolated and chosen for further study. PBK-asdAE1 was subcloned and its sequence analysis revealed an open reading frame, consisting of 1599 bp, that encodes a 533-amino-acid polypeptide. The nucleotide sequence of the asd gene from A. faecalis CCRC 11585 (asdA) showed 84% identity with that from Pseudomonas dacunhae CCRC 12623, and the amino acid sequence showed 93% identity. The amino acid sequence of the AsdA showed 51–58% homology with various aminotransferases. Alignment of the AsdA with several aspartate or tyrosine aminotransferases revealed 17 conserved amino acids that appeared in most of the conserved amino acid residues within the pyridoxal-5′-phosphate (PLP) binding domains of aminotransferases. Furthermore, the asdA gene was cloned into expression vector pET-21a and transformed into E. coli BL21(DE3). A protein band sized at 61 kDa is present on the SDS-PAGE gel from the intracellular soluble form of E. coli BL21(DE3)/pET-asdA. The specific activities of the pET-AsdA purified by using His-Bind chromatography is 215 U/mg at 45°C and pH 5.0, which is 1000-fold higher than that of the A. faecalis crude extract. This is the first report of an asdA gene sequence from A. faecalis and represents the potential application of a recombinant AsdA for production of l-alanine or d-aspartic acid. Journal of Industrial Microbiology & Biotechnology (2000) 25, 132–140. Received 02 November 1999/ Accepted in revised form 23 June 2000     

Isolation of a low-temperature adapted lipolytic enzyme from uncultivated micro-organism

Aims: The aim of the study was to isolate a novel lipolytic enzyme from the activated sludge of uncultured micro‐organisms. Methods and Results: The metagenomic DNA was directly extracted from the activated sludge, and a metagenomic library was constructed by using the pUC vector. The library was screened for lipolytic enzyme activity on 1% tributyrin agar plate. A clone among c. 100 000 recombinant libraries showed the lipolytic activity. The putative lipolytic gene encoding lipo1 from the metagenomic library was subcloned and expressed in Escherichia coli BL21 using the pET expression system. The expressed recombinant enzyme was purified by Ni‐nitrilotriacetic acid affinity chromatography and characterized using general substrates of lipolytic property. The gene consisted of 972 bp encoding a polypeptide of 324 amino acids with a molecular mass of 35·6 kDa. Typical residues essential for lipolytic activity such as penta‐peptide (GXSXG) and catalytic triad sequences (Ser166, Asp221 and His258) were detected. The deduced amino acid sequence of lipo1 showed low identity with amino acid sequences of esterase/lipase (32%, ZP_01528487 ) from Pseudomonas mendocina ymp and esterase (31%, AAY45707 ) from uncultured bacterium. This lipolytic enzyme exhibited the highest activity at pH 7·5 and 10°C. At thermal stability analysis, lipo1 was more unstable at 40°C than 10°C. Conclusions: An activity based strategy has been an effective method for fishing out a low‐temperature adapted lipolytic enzyme from the metagenomic library. This lipo1 enzyme can be considered to belong to the hormone‐sensitive lipase family due to the enzyme’s oxyanion hole by the sequence HGGG. Significance and Impact of the Study: Lipo1 is a novel psychrophilic esterase obtained directly from the metagenomic library. Owing its support of significant activity at low temperature, this enzyme is expected to be useful for potential application as a biocatalyst in organic chemistry.     

Cloning, sequencing and overexpression of a Rhodothermus marinus gene encoding a thermostable cellulase of glycosyl hydrolase family 12

A gene library from the thermophilic eubacterium Rhodothermus marinus, strain ITI 378, was constructed in pUC18 and transformed into Escherichia coli. Of 5400 transformants, 3 were active on carboxymethylcellulose. Three plasmids conferring cellulase activity were purified and were all found to contain the same cellulase gene, celA. The open reading frame for the celA gene is 780 base pairs and encodes a protein of 260 amino acids with a calculated molecular mass of 28.8 kDa. The amino acid sequence shows homology with cellulases in glycosyl hydrolase family 12. The celA gene was overexpressed in E. coli when the pET23, T7 phage RNA polymerase system was used. The enzyme showed activity on carboxymethylcellulose and lichenan, but not on birch xylan or laminarin. The expressed enzyme had six terminal histidine residues and was purified by using a nickel nitrilotriacetate column. The enzyme had a pH optimum of 6–7 and its highest measured initial activity at 100 °C. The heat stability of the enzyme was increased by removal of the histidine residues. It then retained 75% of its activity after 8 h at 90 °C. Received: 5 August 1997 / Received revision: 6 November 1997 / Accepted: 7 November 1997     

Molecular Cloning of the Gene Encoding an Outer-Membrane-Associated β-N-Acetylglucosaminidase Involved in Chitin Degradation System of Alteromonas sp. Strain O-7

The gene encoding β-N-acetylglucosaminidase (GlcNAcaseA) was cloned using PCR with degenerate oligonucleotide primers from the partial amino acid sequence of the enzyme. The gene encoded a polypeptide of 863 amino acids with a predicted molecular mass of 97 kDa. A characteristic signal peptide, which was present at the amino-terminus of the precursor protein, contained four amino acids (Ala-Gly-Cys-Ser) identical in sequence and location to the processing and modification sites of the outer membrane lipoprotein of Escherichia coli, indicating that the mature GlcNAcaseA is a lipoprotein the N-terminal cysteine residue of which would be modified by the fatty acid that anchors the protein in the membrane. The predicted amino acid sequence of GlcNAcaseA showed similarity to bacterial β-N-acetylglucosaminidases belonging to the family 20 glycosyl hydrolases.     

Heterologous expression and characterization of a malathion-hydrolyzing carboxylesterase from a thermophilic bacterium, Alicyclobacillus tengchongensis

A carboxylesterase gene from thermophilic bacterium, Alicyclobacillus tengchongensis, was cloned and expressed in Escherichia coli BL21 (DE3). The gene coded for a 513 amino acid protein with a calculated molecular mass of 57.82 kDa. The deduced amino acid sequence had structural features highly conserved among serine hydrolases, including Ser204, Glu325, and His415 as a catalytic triad, as well as type-B carboxylesterase serine active site (FGGDPENITIGGQSAG) and type-B carboxylesterase signature 2 (EDCLYLNIWTP). The purified enzyme exhibited optimum activity with β-naphthyl acetate at 60 °C and pH 7 as well as stability at 25 °C and pH 7. One unit of the enzyme hydrolyzed 5 mg malathion l^?1 by 50 % within 25 min and 89 % within 100 min. The enzyme strongly degraded malathion and has a potential use for the detoxification of malathion residues.     

Improved expression of a soluble single chain antibody fusion protein containing tumor necrosis factor in <Emphasis Type="Italic">Escherichia coli</Emphasis>

An epoxide hydrolase gene of about 0.8 kb was cloned from Rhodococcus opacus ML-0004, and the open reading frame (ORF) sequence predicted a protein of 253 amino acids with a molecular mass of about 28 kDa. An expression plasmid carrying the gene under the control of the tac promotor was introduced into Escherichia coli, and the epoxide hydrolase gene was successfully expressed in the recombinant strains. Some characteristics of purified recombinant epoxide hydrolase were also studied. Epoxide hydrolase showed a high stereospecificity for l(+)-tartaric acid, but not for d(+)-tartaric acid. The epoxide hydrolase activity could be assayed at the pH ranging from 3.5 to 10.0, and its maximum activity was obtained between pH 7.0 and 7.5. The enzyme was sensitive to heat, decreasing slowly between 30°C and 40°C, and significantly at 45°C. The enzyme activity was activated by Ca²⁺ and Fe²⁺, while strongly inhibited by Ag⁺ and Hg⁺, and slightly inhibited by Cu²⁺, Zn²⁺, Ba²⁺, Ni⁺, EDTA–Na₂ and fumarate.     

Characterization of a novel dye-linked <Emphasis Type="SmallCaps">l</Emphasis>-proline dehydrogenase from an aerobic hyperthermophilic archaeon, <Emphasis Type="Italic">Pyrobaculum calidifontis</Emphasis>

The activity of a dye-linked l-proline dehydrogenase (dye-l-proDH) was found in the crude extract of an aerobic hyperthermophilic archaeon, Pyrobaculum calidifontis JCM 11548, and was purified 163-fold through four sequential chromatography steps. The enzyme has a molecular mass of about 108 kDa and is a homodimer with a subunit molecular mass of about 46 kDa. The enzyme retained more than 90% of its activity after incubation at 100 °C for 120 min (pH 7.5) or after incubation at pHs 4.5–9.0 for 30 min at 50 °C. The enzyme catalyzed l-proline dehydrogenation to Δ¹-pyroline-5-carboxylate using 2,6-dichloroindophenol (DCIP) as the electron acceptor and the Michaelis constants for l-proline and DCIP were 1.67 and 0.026 mM, respectively. The prosthetic group on the enzyme was identified as flavin adenine dinucleotide by high-performance liquid chromatography. The subunit N-terminal amino acid sequence was MYDYVVVGAG. Using that sequence and previously reported genome information, the gene encoding the enzyme (Pcal_1655) was identified. The gene was then cloned and expressed in Escherichia coli and found to encode a polypeptide of 415 amino acids with a calculated molecular weight of 46,259. The dye-l-proDH gene cluster in P. calidifontis inherently differs from those in the other hyperthermophiles reported so far.     

Microencapsulated bile salt hydrolase producing <Emphasis Type="Italic">Lactobacillus reuteri</Emphasis> for oral targeted delivery in the gastrointestinal tract

A gene encoding a xylanase, named xynS20, was cloned from the ruminal fungus Neocallimastix patriciarum. The DNA sequence of xynS20 revealed that the gene was 1,008 bp in size and encoded amino acid sequences with a predicted molecular weight of 36 kDa. The amino acid sequence alignment showed that the highest sequence identity (28.4%) is with insect gut xylanase XYL6805. According to the sequence-based classification, a putative conserved domain of glycosyl hydrolase family 11 was detected at the N-terminus of XynS20 and a putative conserved domain of family 1 carbohydrate-binding module (CBM) was observed at the C-terminus of XynS20. An Asn-rich linker sequence was found between the N-terminal catalytic domain and the C-terminal CBM of XynS20. To examine the activity of the gene product, xynS20 gene was cloned as an oleosin-fused protein, expressed in Escherichia coli, affinity-purified by formation of artificial oil bodies, released from oleosin by intein-mediated peptide cleavage, and finally harvested by concentration of the supernatant. The specific activity of purified XynS20 toward oat spelt xylan was 1,982.8 U mg⁻¹. The recombinant XynS20 was stable in the mild acid pH range from 5.0 to 6.0, and the optimum pH was 6.0. The optimal reaction temperature of XynS20 was 45°C; at temperatures below 30 and above 55°C, enzyme activity was less than 50% of that at the optimal temperature.     

Studies on Antioxidative Substances of Microbial Origin

Aminopeptidase T (AP-T) is a metallo-dependent dimeric enzyme of Thermus aquaticus YT-1, an extremely thermophilic bacterium. We cloned the AP-T gene from T. aquaticus YT-1 into Escherichia coli using a synthetic oligonucleotide as a hybridization probe. The nucleotide sequence of the AP-T gene was found to encode 408 amino acid residues with GTG as a start codon. The molecular weight was calculated to be 44,820. The AP-T was overproduced in E. coli (about 5% of total soluble protein) when the start codon of the gene was changed from GTG to ATG, and the gene was downstream from the tac promoter. The AP-T expressed in E. coli was heat stable and easily purified by heat treatment (80°C, 30 min). The N-terminal amino acid sequence of AP-T showed similarity with that of aminopeptidase II from Bacillus stearothermophilus.