Interaction between the min locus and ftsZ.

In Escherichia coli, distinct but similar minicell phenotypes resulting from mutation at the minB locus and increased expression of ftsZ suggested a possible interaction between these genes. A four- to fivefold increase in FtsZ resulting from increased gene dosage was found to suppress the lethality of minCD expressed from the lac promoter. Since increased MinCD did not affect the level of FtsZ, this suggested that MinCD may antagonize FtsZ to inhibit its cell division activity. This possibility was supported by the finding that alleles of ftsZ isolated as resistant to the cell division inhibitor SulA were also resistant to MinCD. Among the ftsZ(Rsa) alleles, two appeared to be completely resistant to MinCD as demonstrated by the lack of an effect of MinCD on cell length and a minicell phenotype observed in the absence of a significant increase in FtsZ. It was shown that SulA inhibits cell division independently of MinCD.     

A division inhibitor and a topological specificity factor coded for by the minicell locus determine proper placement of the division septum in E. coli

The E. coli minicell locus (minB) was shown to code for three gene products (MinC, MinD, and MinE) whose coordinate action is required for proper placement of the division spetum. Studies of the phenotypic effects of expression of the three genes, alone and in all possible combinations, indicated the following: cell poles contain potential division sites that will support additional septation events unless specifically inactivated; the minC and minD gene products act in concert to form a nonspecific inhibitor of septation that is capable of blocking cell division at all potential division sites; and the minE gene codes for a topological specificity factor that, in wild-type cells, prevents the division inhibitor from acting at internal division sites while permitting it to block septation at polar sites.     

The divIVA minicell locus of Bacillus subtilis.

The Bacillus subtilis divIVA1 mutation causes misplacement of the septum during cell division, resulting in the formation of small, circular, anucleate minicells. This study reports the cloning and sequence analysis of 2.4 kb of the B. subtilis chromosome including the divIVA locus. Three open reading frames were identified: orf, whose function is unknown; divIVA; and isoleucyl tRNA synthetase (ileS). We identified the point mutation in the divIVA1 mutant allele. Inactivation of divIVA produces a minicell phenotype, whereas overproduction of DivIVA results in a filamentation phenotype. Mutants with mutations at both of the minicell loci of B. subtilis, divIVA and divIVB, possess a minicell phenotype identical to that of the DivIVB- mutant. The DivIVA-mutants, but not the DivIVB- mutants, show a decrease in sporulation efficiency and a delay in the kinetics of endospore formation. The data support a model in which divIVA encodes the topological specificity subunit of the minCD system. The model suggests that DivIVA acts as a pilot protein, directing minCD to the polar septation sites. DivIVA also appears to be the interface between a sporulation component and MinCD, freeing up the polar septation sites for use during the asymmetric septation event of the sporulation process.     

The minCD locus of Bacillus subtilis lacks the minE determinant that provides topological specificity to cell division

A key event of the sporulation process in Bacillus subtilis is the asymmetric cell division that divides the developing cell into two unequal compartments. To examine the function of vegetative cell division genes in this developmental division, we isolated and characterized the B. subtilis counterpart to the Escherichia coli minicell operon minB, which governs correct placement of the division septum. Starting from the closely linked spo/VFlocus, we used walking methods to isolate the region of the B. subtilis chromosome proximate to the divlVB minicell locus. DNA sequence analysis found two open reading frames whose predicted products had significant identity to the E. coli MinC cell division inhibitor and the MinD ATPase activator of MinC, and disruption of minCD function generated a minicell phenotype in B. subtilis. Notably, no homologue to the E. coli MinE topological specificity element was found in the B. subtilis minCD region. The B. subtilis min genes were part of an operon transcribed from a major promoter more than 2.5 kb upstream from minC. An internal promoter immediately upstream from minC was dependent on RNA polymerase containing sigma-H and was active at the onset of sporulation. However, neither minCnor minD function was absolutely required for sporulation and, by implication, for asymmetric septum formation.     

Genetic Mapping of the minB Locus in Escherichia coli K-12

The minB (minicell production) locus of Escherichia coli K-12 was mapped by transduction using bacteriophage P1. minB is located at min 25.6, between purB (min 25.2) and dadR (min 25.8). The mapping was facilitated by the use of insertion zcf-236::Tn10, which is inserted at min 25.4.     

Overproduction of FtsZ induces minicell formation in E. coli

The ftsZ gene in E. coli K-12 is an essential cell division gene. We report that a two to sevenfold increase in the level of the FtsZ protein resulted in induction of the minicell phenotype. An increase in the level of FtsZ beyond this range resulted in an inhibition of all cell division. Unlike the classical minicell mutant, the formation of minicells induced by increased levels of FtsZ did not occur at the expense of normal divisions, indicating that increasing FtsZ resulted in additional division events per cell cycle. In addition, increased FtsZ caused cell division to be initiated earlier in the cell cycle. These results are consistent with the level or activity of FtsZ controlling the frequency of cell division in E. coli.     

Genetic basis of minicell formation in Escherichia coli K-12.

Hfr- and P1-mediated genetic transfer experiments failed to confirm the presence of a " minA " gene in Escherichia coli K-12, leading to the conclusion that mutation at a single locus, the minB locus, is sufficient to cause minicell production in this species.     

Deletion analysis of gene minE which encodes the topological specificity factor of cell division in Escherichia coli

Division inhibition caused by the minCD gene products of Escherichia coli is suppressed specifically at mid-cell by MinE protein expressed at physiological levels. Excess MinE allows division to take place also at the poles, leading to a minicell-forming (Min⁻) phenotype. In order to investigate the basis of this topological specificity, we have analysed the ability of truncated derivatives of MinE to suppress either minCD -dependent division inhibition in a chromosomal Δ( minB ) background, or the division inhibition exerted by MinCD at the cell poles in a minB,+ strain. Our results indicate that these two effects are not mediated by identical interactions of MinE protein. In addition, gel filtration and the yeast two-hybrid system indicated that MinE interacts with itself by means of its central segment. Taken together, our results favour a model in which wild-type MinE dimer molecules direct the division inhibitor molecules to the cell poles, thus preventing polar divisions and allowing non-polar sites to divide. This model explains how excess MinE, or an excess of certain MinE derivatives which prevent the accumulation of the division inhibitor at the poles, can confer a Min⁻ phenotype in a minB ⁺ strain.     

MinCD Proteins Control the Septation Process during Sporulation of Bacillus subtilis

Mutation of the divIVB locus in Bacillus subtilis causes misplacement of the septum during cell division and allows the formation of anucleate minicells. The divIVB locus contains five open reading frames (ORFs). The last two ORFs (minCD) are homologous to minC and minD of Escherichia coli but a minE homolog is lacking in B. subtilis. There is some similarity between minicell formation and the asymmetric septation that normally occurs during sporulation in terms of polar septum localization. However, it has been proposed that MinCD has no essential role in sporulation septum formation. We have used electron microscopic studies to show septation events during sporulation in some minD strains. We have observed an unusually thin septum at the midcell position in minD and also in minD spoIIE71 mutant cells. Fluorescence microscopy also localized a SpoIIE-green fluorescent protein fusion protein at the midcell site in minD cells. We propose that the MinCD complex plays an important role in asymmetric septum formation during sporulation of B. subtilis cells.     

Rule governing the division pattern in Escherichia coli minB and wild-type filaments.

Escherichia coli minB mutants form anucleate minicells and multinucleate filaments. We show here that the overwhelming majority of nucleate cells contain 2n (n = 0, 1, 2, ...) nucleoids, as determined by 4',6-diamidino-2-phenylindole staining, and 2n (n = 1, 2, 3, ...) copies of the replication origin, as determined by flow cytometry. This shows that division sites are not chosen randomly among the available sites in minB filaments. Similarly, wild-type cells contain 2n nucleoids, both during cell division inhibition and when furazlocillin-induced filaments are allowed to divide. We conclude that the min+ function is only to prevent septation only at polar sites; the placement of internal cell division sites must obey strict rules, which are the same in minB and wild-type cells.     

Minicell-forming mutants of Escherichia coli: production of minicells and anucleate rods.

The Escherichia coli minB mutant originally isolated is known to septate at cell poles to form spherical anucleate minicells. Three new minicell-producing mutants were isolated during a screening by autoradiography for chromosome partition mutants giving rise spontaneously to normal-sized anucleate cells. These min mutants were affected close to or in the minB locus. Autoradiography analysis as well as fluorescent staining of DNA showed that in addition to minicells, these strains and the original minB mutant also spontaneously produced anucleate rods of normal size and had an abnormal DNA distribution in filaments. These aberrations were not associated with spontaneous induction of the SOS response. Inhibition of DNA synthesis in these mutants gave rise to anucleate cells whose size was longer than unit cell length, suggesting that the min defect allows septation to take place at normally forbidden sites not only at cell poles but also far from poles. Abnormal DNA distribution and production of anucleate rods suggest that the Min product(s) could be involved in DNA distribution.     

Cell growth and division in Escherichia coli: a common genetic control involved in cell division and minicell formation

Escherichia coli Div 124(ts) is a conditional-lethal cell division mutant formed from a cross between a mutant that produces polar anucleated minicells and a temperature-sensitive cell division mutant affected in a stage of cross-wall synthesis. Under permissive growth temperature (30 C), Div 124(ts) grows and produces normal progeny cells and anucleated minicells from its polar ends. When transferred to nonpermissive growth temperature (42 C), growth and macromolecular synthesis continue, but cell division and minicell formation are inhibited. Growth at 42 C results in formation of filamentous cells showing some constrictions along the length of the filaments. Return of the filaments from 42 to 30 C results in cell division and minicell formation in association with the constrictions and other areas along the length of the filaments. This gives rise to a "necklace-type" array of cells and minicells. Recovery of cell division is observed after a lag and is followed by a burst in cell division and finally by a return to the normal growth characteristic of 30 C cultures. Recovery of cell division takes place in the presence of chloramphenicol or nalidixic acid when these are added at the time of shift from 42 to 30 C, and indicates that a division potential for filament fragmentation is accumulated while the cells are at 42 C. This division potential is used for the production of both minicells and cells of normal length. The conditional-lethal temperature sensitive mutation controls a step(s) in cross-wall synthesis common to cell division and minicell formation.     

The relationship between hetero-oligomer formation and function of the topological specificity domain of the Escherichia coli MinE protein

MinE is an oligomeric protein that, in conjunction with other Min proteins, is required for the proper placement of the cell division site of Escherichia coli . We have examined the self-association properties of MinE by analytical ultracentrifugation and by studies of hetero-oligomer formation in non-denaturing polyacrylamide gels. The self-association properties of purified MinE predict that cytoplasmic MinE is likely to exist as a mixture of monomers and dimers. Consistent with this prediction, the C-terminal MinE^22–88 fragment forms hetero-oligomers with MinE⁺ when the proteins are co-expressed. In contrast, the MinE^36–88 fragment does not form MinE⁺/MinE^36–88 hetero-oligomers, although MinE^36–88 affects the topological specificity of septum placement as shown by its ability to induce minicell formation when co-expressed with MinE⁺ in wild-type cells. Therefore, hetero-oligomer formation is not necessary for the induction of minicelling by expression of MinE^36–88 in wild-type cells. The interference with normal septal placement is ascribed to competition between MinE^36–88 and the corresponding domain in the complete MinE protein for a component required for the topological specificity of septal placement.     

The cdc7 protein kinase is a dosage dependent regulator of septum formation in fission yeast.

Mutation of the Schizosaccharomyces pombe cdc7 gene prevents formation of the division septum and cytokinesis. We have cloned the cdc7 gene and show that it encodes a protein kinase which is essential for cell division. In the absence of cdc7 function, spore germination, DNA synthesis and mitosis are unaffected, but cells are unable to initiate formation of the division septum. Overexpression of p120cdc7 causes cell cycle arrest; cells complete mitosis and then undergo multiple rounds of septum formation without cell cleavage. This phenotype, which is similar to that resulting from inactivation of cdc16 protein, requires the kinase activity of p120cdc7. Mutations inactivating the early septation gene, cdc11, suppress the formation of multiple septa and allow cells to proliferate normally. If formation of the division septum is prevented by inactivation of either cdc14 or cdc15, p120cdc7 overproduction does not interfere with other events in the mitotic cell cycle. Septation is not induced by overexpression of p120cdc7 in G2 arrested cells, indicating that it does not bypass the normal dependency of septation upon initiation of mitosis. These findings indicate that the p120cdc7 protein kinase plays a key role in initiation of septum formation and cytokinesis in fission yeast and suggest that p120cdc7 interacts with the cdc11 protein in the control of septation.     

Genetic analysis of chs1+ and chs2+ encoding chitin synthases from Schizosaccharomyces pombe

To explore the function of chitin in Schizosaccharomyces pombe, we have cloned chs1+ and chs2+, encoding putative chitin synthases, based on sequences in the Sanger Centre database. The synthetic lethal phenotype of the S. cerevisiae chs1 chs2 chs3 mutant was complemented by expression of S. pombe chs1+ or chs1+, indicating that both chs1+ and chs2+ in fact encode chitin synthase. The homothallic Deltachs1 strain formed abnormal asci that contained 1, 2, or 3 spores, while the Deltachs2 strain had no noticeable phenotype. The chs1 chs2 double disruptant looked similar phenotypically to the Deltachs1 strain. The Chs2-GFP fusion protein predominantly localized at the septum after the septum was formed during vegetative growth. The level of chs2+ mRNA increased just before the septum was formed. Levels of Chs2-13Myc synthesis also changed during the cell cycle. Thus, chs1+ is required for proper spore formation, and chs2+ is perhaps involved in septum formation.     

Identification of Bacillus subtilis genes for septum placement and shape determination.

The Bacillus subtilis divIVB1 mutation causes aberrant positioning of the septum during cell division, resulting in the formation of small, anucleate cells known as minicells. We report the cloning of the wild-type allele of divIVB1 and show that the mutation lies within a stretch of DNA containing two open reading frames whose predicted products are in part homologous to the products of the Escherichia coli minicell genes minC and minD. Just upstream of minC and minD, and in the same orientation, are three genes whose products are homologous to the products of the E. coli shape-determining genes mreB, mreC, and mreD. The B. subtilis mreB, mreC, and mreD genes are the site of a conditional mutation (rodB1) that causes the production of aberrantly shaped cells under restrictive conditions. Northern (RNA) hybridization experiments and disruption experiments based on the use of integrational plasmids indicate that the mre and min genes constitute a five-cistron operon. The possible involvement of min gene products in the switch from medial to polar placement of the septum during sporulation is discussed.