Optical sensing of biomedically important polyionic drugs using nano-sized gold particles

A simple optical method for the sensing of biomedically important polyionic drugs, protamine and heparin based on the reversible aggregation and de-aggregation of gold nanoparticles (AuNPs) is described. The polycationic protamine induces the aggregation of negatively charged citrate-stabilized AuNPs, resulting in a shift in the surface plasmon (SP) band and a consequent color change of the AuNPs from red to blue. Addition of polyanionic heparin dissipates the aggregated AuNPs due to its strong affinity to protamine and the blue color changes to the native color. The color change was monitored using UV-vis spectrophotometry. The aggregation and de-aggregation was confirmed by transmission electron microscopic (TEM) measurements. The degree of aggregation and de-aggregation is proportional to the concentration of added protamine and heparin, allowing their quantitative detection. The change in the absorbance and SP band position has been used to monitor the concentration of protamine and heparin. This optical method can quantify protamine and heparin as low as 0.1 microg/ml and 0.6 microg/ml, respectively and the calibration is linear for a wide range of concentration.     

Helicase assembly protein Gp59 of bacteriophage T4: fluorescence anisotropy and sedimentation studies of complexes formed with derivatives of Gp32, the phage ssDNA binding protein.

The gene 59 protein (gp59) of bacteriophage T4 performs a vital function in phage DNA replication by directing the assembly of gp41, the DNA helicase component of the T4 primosome, onto lagging strand ssDNA at nascent replication forks. The helicase assembly activity of gp59 is required for optimum efficiency of helicase acquisition by the replication fork during strand displacement DNA synthesis and is essential for helicase and primosome assembly during T4 recombination-dependent DNA replication transactions. Of central importance is the ability of gp59 to load the gp41 helicase onto ssDNA previously coated with cooperatively bound molecules of gp32, the T4 ssDNA binding protein. Gp59 heteroassociations with ssDNA, gp32, and gp41 all appear to be essential for this loading reaction. Previous studies demonstrated that a tripartite complex containing gp59 and gp32 simultaneously cooccupying ssDNA is an essential intermediate in gp59-dependent helicase loading; however, the biochemical and structural parameters of gp59-gp32 complexes with or without ssDNA are currently unknown. To better understand gp59-gp32 interactions, we performed fluorescence anisotropy and analytical ultracentrifugation experiments employing native or rhodamine-labeled gp59 species in combination with altered forms of gp32, allowing us to determine their binding parameters, shape parameters, and other hydrodynamic properties. Two truncated forms of gp32 were used: gp32-B, which lacks the N-terminal B-domain required for cooperative binding to ssDNA and for stable self-association, and A-domain fragment, which is the C-terminal peptide of gp32 lacking ssDNA binding ability. Results indicate that gp59 binds with high affinity to either gp32 derivative to form a 1:1 heterodimer. In both cases, heterodimer formation is accompanied by a conformational change in gp59 which correlates with decreased gp59-DNA binding affinity. Hydrodynamic modeling suggests an asymmetric prolate ellipsoid shape for gp59, consistent with its X-ray crystallographic structure, and this asymmetry appears to increase upon binding of gp32 derivatives. Implications of our findings for the structure and function of gp59 and gp59-gp32 complexes in T4 replication are discussed.     

Ultrasensitive electrical detection of protein using nanogap electrodes and nanoparticle-based DNA amplification

The present study describes an ultrasensitive protein biochip that employs nanogap electrodes and self-assembled nanoparticles to electrically detect protein. A bio-barcode DNA technique amplifies the concentration of target antigen at least 100-fold. This technique requires the establishment of conjugate magnetic nanoparticles (MNPs) and gold nanoparticles (AuNPs) through binding between monoclonal antibodies (2B2), the target antigen, and polyclonal antibodies (GP). Both GP and capture ssDNA (single-strand DNA) bonds to bio-barcode ssDNA are immobilized on the surface of AuNPs. A denature process releases the bio-barcode ssDNAs into the solution, and a hybridization process establishes multilayer AuNPs over the gap surface between electrodes. Electric current through double-layer self-assembled AuNPs is much greater than that through self-assembled monolayer AuNPs. This significant increase in electric current provides evidence that the solution contains the target antigen. Results show that the protein biochip attains a sensitivity of up to 1 pg/μL.     

Surface Plasmon Resonance Studies of the Hybridization Behavior of DNA-Modified Gold Nanoparticles with Surface-Attached DNA Probes

Colloidal gold nanoparticles (AuNPs) have been extensively investigated as amplification tags to improve the sensitivity of surface plasmon resonance (SPR) biosensors. When using the so-called AuNP-enhanced SPR technique for DNA detection, the density of single-stranded DNA (ssDNA) on both the AuNPs and planar gold substrates is of crucial importance. Thus, in this work, we carried out a systematical study about the influence of surface ssDNA density onto the hybridization behavior of various DNA-modified AuNPs (DNA-AuNPs) with surface-attached DNA probes by using surface plasmon resonance spectroscopy. The lateral densities of the ssDNA on both the AuNPs and planar gold substrates were controlled by using different lengths of oligo-adenine sequence (OAS) as anchoring group. Besides SPR measurements, the amount of the captured DNA-AuNPs after the hybridization was further identified via atomic force microscope (AFM). SPR and AFM results clearly indicated that a higher ssDNA density on either the AuNPs or the gold substrates would give rise to better hybridization efficiency. Moreover, SPR data showed that the captured DNA-AuNPs could not be removed from SPR sensor surfaces using various dehybridization solutions regardless of surface ssDNA density. Consequently, it is apparent that the hybridization behavior of DNA-AuNPs was different from that of solution-phase ssDNA. Based on these data, we hypothesized that both multiple recognitions and limited accessibility might account for the hybridization of DNA-AuNPs with surface-attached ssDNA probes.

     

Direct electrochemical sensor for label-free DNA detection based on zero current potentiometry

A direct electrochemical DNA biosensor based on zero current potentiometry was fabricated by immobilization of ssDNA onto gold nanoparticles (AuNPs) coated pencil graphite electrode (PGE). One ssDNA/AuNPs/PGE was connected in series between clips of working and counter electrodes of a potentiostat, and then immersed into the solution together with a reference electrode, establishing a novel DNA biosensor for specific DNA detection. The variation of zero current potential difference (ΔE(zcp)) before and after hybridization of the self-assembled probe DNA with the target DNA was used as a signal to characterize and quantify the target DNA sequence. The whole DNA biosensor fabrication process was characterized by cyclic voltammetry and electrochemical impedance spectroscopy with the use of ferricyanide as an electrochemical redox indicator. Under the optimized conditions, ΔE(zcp) was linear with the concentrations of the complementary target DNA in the range from 10nM to 1μM, with a detection limit of 6.9nM. The DNA biosensor showed a good reproducibility and selectivity. Prepared DNA biosensor is facile and sensitive, and it eliminates the need of using exogenous reagents to monitor the oligonucleotides hybridization.     

Aggregation and G-quadruplex DNA-binding study of 6a,12a-diazadibenzo-[a,g]fluorenylium derivative

The aggregation and DNA binding behavior of a new G-quadruplex selective ligand, 6a,12a-diazadibenzo-[a,g]fluorenylium derivative, was studied by UV-vis absorption and fluorescence spectroscopy. The formation of ligand aggregates with different spectral characteristics was observed at low and high concentration of NaCl, respectively. The ligand binds to G-quadruplex with much higher affinity than to single- and double-stranded DNA.     

Sensitive colorimetric visualization of dihydronicotinamide adenine dinucleotide based on anti-aggregation of gold nanoparticles via boronic acid-diol binding

A facile, highly sensitive colorimetric strategy for dihydronicotinamide adenine dinucleotide (NADH) detection is proposed based on anti-aggregation of gold nanoparticles (AuNPs) via boronic acid-diol binding chemistry. The aggregation agent, 4-mercaptophenylboronic acid (MPBA), has specific affinity for AuNPs through Au-S interaction, leading to the aggregation of AuNPs by self-dehydration condensation at a certain concentration, which is responsible for a visible color change of AuNPs from wine red to blue. With the addition of NADH, MPBA would prefer reacting with NADH to form stable borate ester via boronic acid-diol binding dependent on the pH and solvent, revealing an obvious color change from blue to red with increasing the concentration of NADH. The anti-aggregation effect of NADH on AuNPs was seen by the naked eye and monitored by UV-vis extinction spectra. The linear range of the colorimetric sensor for NADH is from 8.0 × 10(-9)M to 8.0 × 10(-6)M, with a low detection limit of 2.0 nM. The as-established colorimetric strategy opened a new avenue for NADH determination.     

Interaction of dimeric intercalating dyes with single-stranded DNA.

The unsymmetrical cyanine dye thiazole orange homodimer (TOTO) binds to single-stranded DNA (ssDNA, M13mp18 ssDNA) to form a fluorescent complex that is stable under the standard conditions of electrophoresis. The stability of this complex is indistinguishable from that of the corresponding complex of TOTO with double-stranded DNA (dsDNA). To examine if TOTO exhibits any binding preference for dsDNA or ssDNA, transfer of TOTO from pre-labeled complexes to excess unlabeled DNA was assayed by gel electrophoresis. Transfer of TOTO from M13 ssDNA to unlabeled dsDNA proceeds to the same extent as that from M13 dsDNA to unlabeled dsDNA. A substantial amount of the dye is retained by both the M13 ssDNA and M13 dsDNA even when the competing dsDNA is present at a 600-fold weight excess; for both dsDNA and ssDNA, the pre-labeled complex retains approximately one TOTO per 30 bp (dsDNA) or bases (ssDNA). Rapid transfer of dye from both dsDNA and ssDNA complexes is seen at Na+ concentrations > 50 mM. Interestingly, at higher Na+ or Mg2+ concentrations, the M13 ssDNA-TOTO complex appears to be more stable to intrinsic dissociation (dissociation in the absence of competing DNA) than the complex between TOTO and M13 dsDNA. Similar results were obtained with the structurally unrelated dye ethidium homodimer. The dsDNA- and ssDNA-TOTO complexes were further examined by absorption, fluorescence and circular dichroism spectroscopy. The surprising conclusion is that polycationic dyes, such as TOTO and EthD, capable of bis-intercalation, interact with dsDNA and ssDNA with very similar high affinity.     

Label-free optical detection of single-base mismatches by the combination of nuclease and gold nanoparticles

We report here an optical approach that enables highly selective and colorimetric single-base mismatch detection without the need of target modification, precise temperature control or stringent washes. The method is based on the finding that nucleoside monophosphates (dNMPs), which are digested elements of DNA, can better stabilize unmodified gold nanoparticles (AuNPs) than single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA) with the same base-composition and concentration. The method combines the exceptional mismatch discrimination capability of the structure-selective nucleases with the attractive optical property of AuNPs. Taking S1 nuclease as one example, the perfectly matched 16-base synthetic DNA target was distinctively differentiated from those with single-base mutation located at any position of the 16-base synthetic target. Single-base mutations present in targets with varied length up to 80-base, located either in the middle or near to the end of the targets, were all effectively detected. In order to prove that the method can be potentially used for real clinic samples, the single-base mismatch detections with two HBV genomic DNA samples were conducted. To further prove the generality of this method and potentially overcome the limitation on the detectable lengths of the targets of the S1 nuclease-based method, we also demonstrated the use of a duplex-specific nuclease (DSN) for color reversed single-base mismatch detection. The main limitation of the demonstrated methods is that it is limited to detect mutations in purified ssDNA targets. However, the method coupled with various convenient ssDNA generation and purification techniques, has the potential to be used for the future development of detector-free testing kits in single nucleotide polymorphism screenings for disease diagnostics and treatments.     

Electrostatic-assembly-driven formation of supramolecular rhombus microparticles and their application for fluorescent nucleic acid detection

In this paper, we report on the large-scale formation of supramolecular rhombus microparticles (SRMs) driven by electrostatic assembly, carried out by direct mixing of an aqueous HAuCl(4) solution and an ethanol solution of 4,4'-bipyridine at room temperature. We further demonstrate their use as an effective fluorescent sensing platform for nucleic acid detection with a high selectivity down to single-base mismatch. The general concept used in this approach is based on adsorption of the fluorescently labeled single-stranded DNA (ssDNA) probe by SRM, which is accompanied by substantial fluorescence quenching. In the following assay, specific hybridization with its target to form double-stranded DNA (dsDNA) results in desorption of ssDNA from SRM surface and subsequent fluorescence recovery.     

Sex determination based on amelogenin DNA by modified electrode with gold nanoparticle

We have developed a simple and renewable electrochemical biosensor based on carbon paste electrode (CPE) for the detection of DNA synthesis and hybridization. CPE was modified with gold nanoparticles (AuNPs), which are helpful for immobilization of thiolated bioreceptors. AuNPs were characterized by scanning electron microscopy (SEM). Self-assembled monolayers (SAMs) of thiolated single-stranded DNA (SH–ssDNA) of the amelogenin gene was formed on CPE. The immobilization of the probe and its hybridization with the target DNA was optimized using different experimental conditions. The modified electrode was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The electrochemical response of ssDNA hybridization and DNA synthesis was measured using differential pulse voltammetry (DPV) with methylene blue (MB) as an electroactive indicator. The new biosensor can distinguish between complementary and non-complementary strands of amelogenin ssDNA. Genomic DNA was extracted from blood and was detected based on changes in the MB reduction signal. These results demonstrated that the new biosensor could be used for sex determination. The proposed biosensor in this study could be used for detection and discrimination of polymerase chain reaction (PCR) products of amelogenin DNA.     

Redesign of a WW domain peptide for selective recognition of single-stranded DNA

A β-sheet miniprotein based on the FBP11 WW1 domain sequence has been redesigned for the molecular recognition of ssDNA. A previous report showed that a β-hairpin peptide dimer, (WKWK)(2), binds ssDNA with low micromolar affinity but with little selectivity over duplex DNA. This report extends those studies to a three-stranded β-sheet miniprotein designed to mimic the OB-fold. The new peptide binds ssDNA with low micromolar affinity and shows about 10-fold selectivity for ssDNA over duplex DNA. The redesigned peptide no longer binds its native ligand, the polyproline helix, confirming that the peptide has been redesigned for the function of binding ssDNA. Structural studies provide evidence that this peptide consists of a well-structured β-hairpin made of strands 2 and 3 with a less structured first strand that provides affinity for ssDNA but does not improve the stability of the full peptide. These studies provide insight into protein-DNA interactions as well as a novel example of protein redesign.     

Direct synthesis of Rev peptide-conjugated gold nanoparticles and their application in cancer therapeutics

We have developed a simple approach for generating peptide-conjugated gold nanoparticles (AuNPs) from the Rev peptide and gold aqueous solution. The peptide functions as both a reducing agent and a capping molecule. AuNPs of various sizes (20-300 nm) and shapes (spheres, triangular plates, and polygons) can be obtained upon modulating the ratio of gold ions to the Rev peptide. Transmission electron microscopy, X-ray diffraction, and UV-vis spectroscopy were utilized to characterize these nanoparticles. Fourier-transform infrared and X-ray photoelectron spectroscopy measurements were performed to investigate chemical interactions between the Rev peptide and AuNPs. Lactate dehydrogenase and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays revealed that the Rev peptide-AuNP nanocomposites exhibited exceptionally high cytotoxic effects toward mouse ovarian surface epithelial cell lines, relative to the effects of equal doses of the free Rev peptide. Our study suggests a new way of utilizing biomolecule-conjugated AuNPs as potentially effective anticancer drugs.     

DNA recognition of a 24-mer peptide derived from RecA protein

A novel 24-residue peptide (L2-G), Ile-Arg-Met-Lys-Ile-Gly-Val-Met-Phe-Gly-Asn-Pro-Glu-Thr-Thr-Thr-Gly-Gly-Asn-Ala-Leu-Lys-Phe-Tyr, derived from RecA can discriminate a single-stranded DNA (ssDNA) from a double-stranded DNA (dsDNA) and a new developed support with this peptide recognizes not dsDNA but ssDNA. The 24-mer peptide with L2 and helix G amino acids of Escherichia coli RecA protein showed the ssDNA binding property with more than 1000 times affinity difference for the dsDNA. However, truncated 15-mer peptide showed no ssDNA binding activity. In the ssDNA binding, L2-G changed its conformation with the perturbation of an alpha-helix structure. The ssDNA binding and the DNA discrimination property of this peptide were due to almost all L2 and helix G amino acids, respectively. This result is useful to design synthetic peptides as functional materials for DNA recognition.     

Topological testing of the mechanism of homology search promoted by RecA protein

To initiate homologous recombination, sequence similarity between two DNA molecules must be searched for and homology recognized. How the search for and recognition of homology occurs remains unproven. We have examined the influences of DNA topology and the polarity of RecA–single-stranded (ss)DNA filaments on the formation of synaptic complexes promoted by RecA. Using two complementary methods and various ssDNA and duplex DNA molecules as substrates, we demonstrate that topological constraints on a small circular RecA–ssDNA filament prevent it from interwinding with its duplex DNA target at the homologous region. We were unable to detect homologous pairing between a circular RecA–ssDNA filament and its relaxed or supercoiled circular duplex DNA targets. However, the formation of synaptic complexes between an invading linear RecA–ssDNA filament and covalently closed circular duplex DNAs is promoted by supercoiling of the duplex DNA. The results imply that a triplex structure formed by non-Watson–Crick hydrogen bonding is unlikely to be an intermediate in homology searching promoted by RecA. Rather, a model in which RecA-mediated homology searching requires unwinding of the duplex DNA coupled with local strand exchange is the likely mechanism. Furthermore, we show that polarity of the invading RecA–ssDNA does not affect its ability to pair and interwind with its circular target duplex DNA.     

RecO-mediated DNA homology search and annealing is facilitated by SsbA

Bacillus subtilis RecO plays a central role in recombinational repair and genetic recombination by (i) stimulating RecA filamentation onto SsbA-coated single-stranded (ss) DNA, (ii) modulating the extent of RecA-mediated DNA strand exchange and (iii) promoting annealing of complementary DNA strands. Here, we report that RecO-mediated strand annealing is facilitated by cognate SsbA, but not by a heterologous one. Analysis of non-productive intermediates reveals that RecO interacts with SsbA-coated ssDNA, resulting in transient ternary complexes. The self-interaction of ternary complexes via RecO led to the formation of large nucleoprotein complexes. In the presence of homology, SsbA, at the nucleoprotein, removes DNA secondary structures, inhibits spontaneous strand annealing and facilitates RecO loading onto SsbA–ssDNA complex. RecO relieves SsbA inhibition of strand annealing and facilitates transient and random interactions between homologous naked ssDNA molecules. Finally, both proteins lose affinity for duplex DNA. Our results provide a mechanistic framework for rationalizing protein release and dsDNA zippering as coordinated events that are crucial for RecA-independent plasmid transformation.     

A fluorescence study of the molecular interactions of harmane with the nucleobases, their nucleosides and mononucleotides

Fluorescence binding studies of harmane to the elemental components of the nucleic acids were undertaken to investigate the origin of the interaction between the drug and DNA. Most of the tested substrates have been found to induce hypochromism in the absorption spectrum of harmane and to quench its fluorescence. The quenching process induced by the nucleobases and their nucleosides is mainly due to the formation of ground state 1:1 complexes. However, in the case of the mononucleotides a dynamic quenching component is also observed. This quenching component is likely due to the excited state interaction of harmane with the phosphate group of the nucleotides. UV-vis spectral changes and quenching measurements have been used to quantify the ground state association constants of the complexes and the quenching rate constants.     

Differential distortion of substrate occurs when it binds to DNA photolyase: a 2-aminopurine study

Cyclobutylpyrimidine dimers (CPDs) are formed between adjacent pyrimidines in DNA when it is exposed to ultraviolet light. CPDs can be directly repaired by DNA photolyase (PL) upon absorption of blue-green light. We have used the fluorescent adenine analogue 2-aminopurine (2Ap) to probe the local double-helical structure of the DNA substrate when it binds to the protein. Duplex melting temperatures and van't Hoff enthalpies were obtained by both UV-vis absorption and fluorescence spectroscopies to ascertain the effect of the probe and CPD on DNA stability. Steady-state fluorescence measurements of the single- and double-stranded oligos showed that the local region around the 5'-side of the CPD lesion was more disrupted and destacked than the 3'-side in substrate-protein complexes. These results were compared with those of a protein-substrate crystal structure, demonstrating that the crystal structure and solution-state studies are in agreement with regard to the differential distortions of the target DNA at the active site of the protein.     

Diffusion of Human Replication Protein A along Single-Stranded DNA

Replication protein A (RPA) is a eukaryotic single-stranded DNA (ssDNA) binding protein that plays critical roles in most aspects of genome maintenance, including replication, recombination and repair. RPA binds ssDNA with high affinity, destabilizes DNA secondary structure and facilitates binding of other proteins to ssDNA. However, RPA must be removed from or redistributed along ssDNA during these processes. To probe the dynamics of RPA–DNA interactions, we combined ensemble and single-molecule fluorescence approaches to examine human RPA (hRPA) diffusion along ssDNA and find that an hRPA heterotrimer can diffuse rapidly along ssDNA. Diffusion of hRPA is functional in that it provides the mechanism by which hRPA can transiently disrupt DNA hairpins by diffusing in from ssDNA regions adjacent to the DNA hairpin. hRPA diffusion was also monitored by the fluctuations in fluorescence intensity of a Cy3 fluorophore attached to the end of ssDNA. Using a novel method to calibrate the Cy3 fluorescence intensity as a function of hRPA position on the ssDNA, we estimate a one-dimensional diffusion coefficient of hRPA on ssDNA of D₁ ~ 5000 nt² s^− 1 at 37 °C. Diffusion of hRPA while bound to ssDNA enables it to be readily repositioned to allow other proteins access to ssDNA.