Nucleotide sequence of the tetM tetracycline resistance determinant of the streptococcal conjugative shuttle transposon Tn1545.

The nucleotide sequence of the tetracycline resistance gene tetM encoded by streptococcal conjugative shuttle transposon Tn1545 has been determined. The resistance gene was identified as a coding sequence of 1917 base pairs corresponding to a protein with a Mr of 72,500 daltons. This value is in good agreement with that, 68,000 daltons, estimated by SDS-polyacrylamide gel electrophoresis of Escherichia coli minicell extracts. The tetM gene product does not exhibit any sequence homology with either the Gram-negative (tetA, tetB and tetC), or the Bacillus and Staphylococcus tetracycline resistance proteins. The average hydropathy value of the tetM gene product (-0.21) contrasts with those calculated for the other TET proteins which are markedly hydrophobic (0.76 to 0.93). Hybridization experiments performed with an intragenic tetM probe do not support the claim [Taylor, D. (1986), J. Bact. 165, 1037-1039)] that tetracycline resistance in Campylobacter is due to acquisition of tetM.     

Nucleotide sequence analysis of the class G tetracycline resistance determinant from Vibrio anguillarum.

The nucleotide sequence of the class G tetracycline resistance determinant previously isolated from Vibrio anguillarum has been determined. Two open reading frames of divergent polarity were identified. A resistance gene (tet A) encodes a protein of 393 amino acid residues (deduced molecular mass of 40.9 kDa), and a repressor gene (tet R) encodes a protein consisting of 210 amino acids with a calculated molecular mass of 23.6 kDa. Based on the deduced amino acid sequences, the proteins of tet A(G) and tet R(G) are about 60% homologous with those of RP1/Tn1721 (class A) and pSC101/pBR322 (class C), and about 50% homologous with Tn10 (class B). The relationship of the tet (G) sequence to five known tetracycline resistance determinants (class A to E) is discussed.     

The Clostridium perfringens Tet P determinant comprises two overlapping genes: tetA(P), which mediates active tetracycline efflux, and tetB(P), which is related to the ribosomal protection family of tetracycline-resistance determinants

The complete nucleotide sequence and mechanism of action of the tetracycline-resistance determinant Tet P, from Clostridium perfringens has been determined. Analysis of the 4.4 kb of sequence data revealed the presence of two open reading frames, designated as tetA(P) and tetB(P), The tetA(P) gene appears to encode a 420 amino acid protein (molecular weight 46079) with twelve transmembrane domains. This gene was shown to be responsible for the active efflux of tetracycline from resistant ceils. Although there was some amino acid sequence similarity between the putative TetA(P) protein and other tetracycline efflux proteins, analysis suggested that TetA(P) represented a different type of efflux protein. The tetB(P) gene would encode a putative 652 amino acid protein (molecular weight 72639) with significant sequence similarity to Tet(M)-like cytoplasmic proteins that specify a ribosomal-protection tetracycline-resistance mechanism. In both C. perfringens and Escherichia coli. tetB(P) encoded low-level resistance to tetracycline and minocycline whereas tetA(P) only conferred tetracycline resistance. The tetA(P) and tetB(P) genes appeared to be linked in an operon, which represented a novel genetic arrangement for tetracycline-resistance determinants. It is proposed that tetB(P) evolved from the conjugative transfer into C. perfringens of a fer (M)-like gene from another bacterium.     

TetZ, a new tetracycline resistance determinant discovered in gram-positive bacteria, shows high homology to gram-negative regulated efflux systems

The complete nucleotide sequence of the tetracycline resistance plasmid pAG1 from the gram-positive soil bacterium Corynebacterium glutamicum 22243 (formerly Corynebacterium melassecola 22243) was determined. The R-plasmid has a size of 19,751 bp and contains at least 18 complete open reading frames. The resistance determinant of pAG1 revealed homology to gram-negative tetracycline efflux and repressor systems of Tet classes A through J. The highest levels of amino acid sequence similarity were observed to the transmembrane tetracycline efflux protein TetA(A) and to the tetracycline repressor TetR(A) of transposon Tn1721 with 64 and 56% similarity, respectively. This is the first time a repressor-regulated tet gene has been found in gram-positive bacteria. A new class of tetracycline resistance and repressor proteins, termed TetA(Z) and TetR(Z), is proposed.     

The nucleotide sequence of the tnpA gene completes the sequence of the Pseudomonas transposon Tn501.

The nucleotide sequence of the gene (tnpA) which codes for the transposase of transposon Tn501 has been determined. It contains an open reading frame for a polypeptide of Mr = 111,500, which terminates within the inverted repeat sequence of the transposon. The reading frame would be transcribed in the same direction as the mercury-resistance genes and the tnpR gene. The amino acid sequence predicted from this reading frame shows 32% identity with that of the transposase of the related transposon Tn3. The C-terminal regions of these two polypeptides show slightly greater homology than the N-terminal regions when conservative amino acid substitutions are considered. With this sequence determination, the nucleotide sequence of Tn501 is fully defined. The main features of the sequence are briefly presented.     

Evidence that a novel tetracycline resistance gene found on two Bacteroides transposons encodes an NADP-requiring oxidoreductase.

Two transposons, Tn4351 and Tn4400, which were originally isolated from the obligate anaerobe Bacteroides fragilis, carry a tetracycline resistance (Tcr) gene that confers resistance only on aerobically grown Escherichia coli. This aerobic Tcr gene, designated tetX, has been shown previously to act by chemically modifying tetracycline in a reaction that appears to require oxygen. We have now obtained the DNA sequence of tetX and 0.6 kb of its upstream region from Tn4400. Analysis of the DNA sequence of tetX revealed that this gene encoded a 43.7-kDa protein. The deduced amino acid sequence of the amino terminus of the protein had homology with a number of enzymes, all of which had in common a requirement for NAD(P). In an earlier study, we had observed that disrupted cells, unlike intact cells, could not carry out the alteration of tetracycline. We have now shown that if NADPH (1 mM) is added to the disrupted cell preparation, alteration of tetracycline occurs. Thus, TetX appears to be an NADP-requiring oxidoreductase. Tn4400 conferred a fivefold-lower level of tetracycline resistance than Tn4351. This finding appears to be due to a lower level of expression of the tetX on Tn4400, because the activity of a tetX-lacZ fusion from Tn4400 was 10-fold lower than that of the same fusion from Tn4351. A comparison of the sequence of the tetX region on Tn4351 with that on Tn4400 showed that the only difference between the upstream regions of the two transposons was a 4-base change 350 bp upstream of the start of the tetX coding region. The 4-base change difference creates a good consensus -35 region on Tn4351 that is not present on Tn4400 and could be creating an extra promoter.     

Plasmid vectors based on Tn10 DNA: gene expression regulated by tetracycline

The regulatory region of the tetracycline resistance determinant from transposon Tn10 has been used to construct plasmid vectors for gene expression regulated by tetracycline. Plasmids pRS tetBam-8 and pRS tetBam-16 include the tet regulatory region, the segment coding for the first four amino acids of the tetracycline resistance protein (tetA protein), and a linker region with SalI, HpaII, and BamHI restriction sites for gene fusions. Plasmid pTB-1, a derivative of pRS tetBam-8 and of the beta-galactosidase gene-containing plasmid pMC1403, constitutively expresses a tetA fragment-beta-galactosidase fusion protein. If a multicopy runaway replication plasmid, pMOBglII-16 that includes a 2.7-kb BglII DNA fragment from Tnl10 that provides tetR protein is present along with pTB-1, the expression of beta-galactosidase is reduced eightfold. Tetracycline acts as an inducer of the system and restores the level of beta-galactosidase activity measured in transformants containing pTB-1 alone. Plasmid mutants unable to produce active tetR protein are ineffective in reducing expression. Escherichia coli carrying plasmids that express both tetA protein and tetR protein show an increase in the tetracycline resistance level after incubation with the drug. The observations are consistent with the previously proposed mechanism of regulation of tetracycline resistance in Tn10.     

Intracistronic complementation of the tetracycline resistance membrane protein of Tn10.

The structural gene region for tetracycline resistance on Tn10 consists of two complementation groups, tetA and tetB (M. S. Curiale and S. B. Levy, J. Bacteriol. 151:209-215, 1982). Using a series of deletion mutants, we have determined that the tetA region is 450 to 600 base pairs long and that the tetB region, which is adjacent to tetA, is 600 to 750 base pairs long. Point mutations in either tetA or tetB affected the amount and size of the inducible inner-membrane Tet protein synthesized in Escherichia coli maxicells. Moreover, deletions in these regions led to the synthesis of an appropriately smaller Tet protein. A single tetracycline-inducible RNA of about 1,200 bases was detected that was homologous with the tetracycline resistance structural gene region. These results indicate that the tetA and tetB complementation regions represent two parts of a single gene encoding two domains of the tetracycline resistance protein Tet.     

Novel tetracycline resistance determinant isolated from an environmental strain of Serratia marcescens

Resistances to tetracycline and mercury were identified in an environmental strain of Serratia marcescens isolated from a stream highly contaminated with heavy metals. As a step toward addressing the mechanisms of coselection of heavy metal and antibiotic resistances, the tetracycline resistance determinant was cloned in Escherichia coli. Within the cloned 13-kb segment, the tetracycline resistance locus was localized by deletion analysis and transposon mutagenesis. DNA sequence analysis of an 8.0-kb region revealed a novel gene [tetA(41)] that was predicted to encode a tetracycline efflux pump. Phylogenetic analysis showed that the TetA(41) protein was most closely related to the Tet(39) efflux protein of Acinetobacter spp. yet had less than 80% amino acid identity with known tetracycline efflux pumps. Adjacent to the tetA(41) gene was a divergently transcribed gene [tetR(41)] predicted to encode a tetracycline-responsive repressor protein. The tetA(41)-tetR(41) intergenic region contained putative operators for TetR(41) binding. The tetA(41) and tetR(41) promoters were analyzed using lacZ fusions, which showed that the expression of both the tetA(41) and tetR(41) genes exhibited TetR(41)-dependent regulation by subinhibitory concentrations of tetracycline. The apparent lack of plasmids in this S. marcescens strain, as well as the presence of metabolic genes adjacent to the tetracycline resistance locus, suggested that the genes were located on the S. marcescens chromosome and may have been acquired by transduction. The cloned Tet 41 determinant did not confer mercury resistance to E. coli, confirming that Tet 41 is a tetracycline-specific efflux pump rather than a multidrug transporter.     

Cloning, expression in Escherichia coli and nucleotide sequence of a tetracycline-resistance gene from Streptomyces rimosus

Determinants of tetracycline resistance have been cloned from two different tetracycline-producing industrial strains of Streptomyces into Streptomyces lividans using the plasmid vector pUT206. Three plasmids, pUT250 and pUT260 with a 9.5 and a 7.5 kb insert respectively of Streptomyces rimosus DNA, and pUT270 with a 14.0 kb insert of Streptomyces aureofaciens DNA, conferring resistance to tetracycline, have been isolated. By in vitro sub-cloning, a similar fragment of 2.45 kb containing the tetracycline resistance gene (tet347) was further localized on these plasmids. The S. rimosus gene has been cloned into Escherichia coli and expressed under the control of lambda pL or Lpp promoters. Differential protein extraction of E. coli cells revealed the presence of an additional membrane-embedded protein in tetracycline-resistant cells. On the basis of available restriction endonuclease maps, the tet347 gene is probably identical to the tetB gene from S. rimosus recently identified by T. Ohnuki and co-workers as responsible for the reduced accumulation of tetracycline. The nucleotide sequence of a 2052 bp DNA fragment containing the TcR structural gene from S. rimosus has been determined. The amino acid sequence of the tet347 protein (Mr35818) deduced from the nucleotide sequence shows a limited but significant homology to other characterized tetracycline transport acting determinants from pathogenic bacteria.     

Genetic and molecular analyses of the C-terminal region of the recE gene from the Rac prophage of Escherichia coli K-12 reveal the recT gene.

The nucleotide sequence of the C-terminal region of the recE gene of the Rac prophage of Escherichia coli K-12 reveals the presence of a partially overlapping reading frame we call recT. Deletion mutations show that recT is required for the RecE pathway of conjugational recombination. By cloning recT with a plasmid vector compatible with pBR322, we showed by cis-trans tests that the portion of the recE gene encoding ExoVIII DNA nuclease activity is also required for RecE pathway conjugational recombination. The recT gene can replace the redB gene of lambda for recA-independent plasmid recombination. A Tn10 insertion mutation previously thought to be in recE is located in recT and is renamed recT101::Tn10. Discrepancies between the molecular mass estimates of wild-type ExoVIII protein determined from mobility in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and calculated from the predicted amino acid sequence are discussed. The hypothesis that wild-type ExoVIII protein results from fusion of RecE and RecT proteins is disproved genetically, thus supporting a previous hypothesis that the discrepancies are due to abnormal protein mobility in SDS-PAGE. A computer-performed scan of the bacteriophage nucleotide sequence data base of GenBank revealed substantial similarity between most of recE and a 2.5-kb portion of the b2 region of lambda. This suggests interesting speculations concerning the evolutionary relationship of lambda and Rac prophages.     

Nucleotide sequence of the DdeI restriction-modification system and characterization of the methylase protein.

The DdeI restriction-modification system was previously cloned and has been maintained in E. coli on two separate and compatible plasmids (1). The nucleotide sequence of the endonuclease and methylase genes has now been determined; it predicts proteins of 240 amino acids, Mr = 27,808, and 415 amino acids, Mr = 47,081, respectively. Inspection of the DNA sequence shows that the 3' end of the methylase gene had been deleted during cloning. The clone containing the complete methylase gene was made and compared to that containing the truncated gene; only clones containing the truncated form support the endonuclease gene in E. coli. Bal-31 deletion studies show that methylase expression in the Dde clones is also dependent upon orientation of the gene with respect to pBR322. The truncated and complete forms of the methylase protein were purified and compared; the truncated form appears to be more stable and active in vitro. Finally, comparison of the deduced amino acid sequence of M. DdeI with that of other known cytosine methylases shows significant regions of homology.     

Construction of an E. coli strain overproducing the Tn10-encoded TET repressor and its use for large scale purification.

Overproduction of the repressor protein from the Tn10-encoded tetracycline resistance operon is achieved by placement of the respective gene under control of bacteriophage lambda promoter PL in a vector-host system. All cloning steps have to be carried out under repressed conditions to assure survival of the cell. The cI 857 mutation is used to control expression of the tetR gene in large scale fermentation. After induction, the overproducing Escherichia coli strain continues to grow for 2.5 generations before growth terminates. In the expression phase, active TET repressor comprises up to 13% of the total soluble protein. A procedure is described to purify the TET repressor protein to homogeneity on a large scale. Starting from a 10 litre culture, approximately 250 mg of homogeneous, active TET repressor are obtained. The amino acid sequence of the N and C termini are in agreement with the gene start and stop determined from the nucleotide sequence of the Tn10 tetR gene.     

Efflux-mediated antiseptic resistance gene qacA from Staphylococcus aureus: common ancestry with tetracycline- and sugar-transport proteins

Resistance to intercalating dyes (ethidium, acriflavine) and other organic cations, such as quaternary ammonium-type antiseptic compounds, mediated by the Staphylococcus aureus plasmid pSK1 is specified by an energy-dependent export mechanism encoded by the qacA gene. From nucleotide sequence analysis, qacA is predicted to encode a protein of Mr 55017 containing 514 amino acids. The gene is likely to initiate with a CUG codon, and a 36 bp palindrome immediately preceding qacA, along with an upstream reading frame with homology to the TetR repressors, may be components of a regulatory circuit. The putative polypeptide specified by qacA has properties typical of a cytoplasmic membrane protein, and is indicated to be a member of a transport protein family that includes proteins responsible for export-mediated resistance to tetracycline and methylenomycin, and uptake of sugars and quinate. The analysis suggests that N- and C-terminal regions of these proteins are involved in energy coupling (proton translocation) and substrate transport, respectively. The last common ancestor of the qacA and related tet (tetracycline resistance) lineages is inferred to have been repressor controlled, as occurs for modern tet determinants from Gram-negative, but not those from Gram-positive, bacteria.     

The region of the IncN plasmid R46 coding for resistance to beta-lactam antibiotics, streptomycin/spectinomycin and sulphonamides is closely related to antibiotic resistance segments found in IncW plasmids and in Tn21-like transposons.

The nucleotide sequence of a 2.5 kb segment of the pKM101 (R46) genome has been determined. The 1.3 kb from a BamHI site at 153 to base 1440 differs by only 2 bases from a part of the published sequence of the aadB (gentamicin resistance) gene region including the coding region for the N-terminal 70 amino acids of the predicted aadB product. The same sequence has been found 5'-to the dhfrII gene of R388 and to the aadA gene of Tn21 (R538-1). Three open reading frames are located in this region, two on the same strand as the resistance genes and one on the complementary strand. The latter predicts a polypeptide of 337 amino acids, whose N-terminal segment is 40% homologous to the predicted product of an open reading frame of 179 amino acids located next to the dhfrI gene of Tn7. The oxa2 (oxacillin resistance) gene predicts a long polypeptide commencing with (the N-terminal) 70 amino acids of the aadB product. A similar arrangement is found in the aadA gene of R538-1. The N-terminal segment of an aadA gene is located 3'- to oxa2, separated by 36 bases. Sequences surrounding the BamHI site are identical to sequences 5'- to the tnpM gene of Tn21 and homology ceases where homology between Tn21 and Tn501 commences. The possibility that this antibiotic resistance segment is a discrete mobile DNA element is discussed.     

Identification of additional genes on transposon Tn10: tetC and tetD.

Two genes (tetC and tetD) were identified and located on transposon Tn10 between gene tetA and insertion sequence IS10R. Genes tetC and tetD encode proteins of apparent subunit molecular weights of 23,000 and 18,000, respectively. The TetD protein was found to be membrane associated. Tetracycline resistance levels promoted by transposon Tn10 were found to be unaffected in Escherichia coli K-12 when mutants lacking tetC or tetC and tetD were tested. The nucleotide sequence of genes tetC and tetD is reported in the accompanying article (K. Schollmeier and W. Hillen, J. Bacteriol. 160:499-503, 1984).