4',6-Diamidino-2-phenylindole, a fluorescent probe for tubulin and microtubules

A new fluorophor for tubulin which has permitted the monitoring of microtubule assembly in vitro is reported. DAPI (4',6-diamidino-2-phenylindole), a fluorophor already known as a DNA intercalator, was shown to bind specifically to a unique tubulin site as a dimer (KD(app) = 43 +/- 5 microM at 37 degrees C) or to tubulin associated in microtubules (KD(app) = 6 +/- 2 microM at 37 degrees C) with the same maximum enhancement in fluorescence. When tubulin polymerization was induced with GTP, the change in DAPI affinity for tubulin resulted in an enhancement of DAPI binding and, consequently, of fluorescence intensity. DAPI, whose binding site is different from that of colchicine, vinblastine, or taxol, did not interfere greatly with microtubule polymerization. It induced a slight diminution of the critical concentration for tubulin assembly due to a decrease in the depolymerizing rate constant. Moreover, DAPI did not interfere with GTP hydrolysis correlated with tubulin polymerization, but it decreased the GTPase activity at the steady state of tubulin assembly. Even at substoichiometric levels DAPI can be used to follow the kinetics of microtubule assembly.     

Microtubule elongation and guanosine 5'-triphosphate hydrolysis. Role of guanine nucleotides in microtubule dynamics

The tubulin concentration dependence of the rates of microtubule elongation and accompanying GTP hydrolysis has been studied over a large range of tubulin concentration. GTP hydrolysis followed the elongation process closely at low tubulin concentration and became gradually uncoupled at higher concentrations, reaching a limiting rate of 35-40 s-1. The kinetic parameters for microtubule growth were different at low and high tubulin concentrations. Elongation of microtubules has also been studied in solutions containing GDP and GTP in variable proportions. Only traces of GTP present in GDP were necessary to confer a high stability (low critical concentration) to microtubules. Pure GDP-tubulin was found unable to elongate microtubules in the absence of GTP but blocked microtubule ends with an equilibrium dissociation constant of 5-6 microM. These data were accounted for by a model within which, in the presence of GTP-tubulin at high concentration, microtubules grow at a fast rate with a large GTP cap; the GTP cap may be quite short in the region of the critical concentration; microtubule stability is linked to the strong interaction between GTP and GDP subunits at the elongating site; dimeric GDP-tubulin does not have the appropriate conformation to undergo reversible polymerization. These results are discussed with regard to possible role of GDP and GTP and of GTP hydrolysis in microtubule dynamics.     

Role of GTP hydrolysis in microtubule polymerization: evidence for a coupled hydrolysis mechanism

The relationship between GTP hydrolysis and microtubule assembly has been investigated by using a rapid filtration method. Microtubules assembled from phosphocellulose-purified tubulin, double-labeled with [gamma-32P]- and [3H]GTP, were trapped and washed free of unbound nucleotide on glass fiber filters. The transient accumulation of microtubule-bound GTP predicted by uncoupled GTP hydrolysis models [Carlier & Pantaloni (1981) Biochemistry 20, 1918-1924; Carlier et al. (1987) Biochemistry 26, 4428-4437] during the rapid assembly of microtubules was not detectable under our experimental conditions. By calculating hypothetical time courses for the transient accumulation of microtubule-bound GTP, we demonstrate that microtubule-bound GTP would have been detectable even if the first-order rate constant for GTP hydrolysis were 4-5 times greater than the pseudo-first-order rate constant for tubulin subunit addition to microtubules. In a similar manner, we demonstrate that if GTP hydrolysis were uncoupled from microtubule assembly but were limited to the interface between GTP subunits and GDP subunits (uncoupled vectorial hydrolysis), then microtubule-bound GTP would have been detectable if GTP hydrolysis became uncoupled from microtubule assembly at less than 50 microM free tubulin, 5 times the steady-state tubulin concentration of our experimental conditions. In addition, during rapid microtubule assembly, we have not detected any microtubule-bound Pi, which has been proposed to form a stabilizing cap at the ends of microtubules [Carlier et al. (1988) Biochemistry 27, 3555-3559]. Also, several conditions that could be expected to increase the degree of potential uncoupling between GTP hydrolysis and microtubule assembly were examined, and no evidence of uncoupling was found. Our results are consistent with models that propose cooperative mechanisms that limit GTP hydrolysis to the terminal ring of tubulin subunits [e.g., O'Brien et al. (1987) Biochemistry 26, 4148-4156]. The results are also consistent with the hypothesis that a slow conformational change in tubulin subunits after GTP hydrolysis and Pi release occurs that results in destabilized microtubule ends when such subunits become exposed at the ends.     

Role of GTP hydrolysis in microtubule dynamics: information from a slowly hydrolyzable analogue, GMPCPP.

The role of GTP hydrolysis in microtubule dynamics has been reinvestigated using an analogue of GTP, guanylyl-(alpha, beta)-methylene-diphosphonate (GMPCPP). This analogue binds to the tubulin exchangeable nucleotide binding site (E-site) with an affinity four to eightfold lower than GTP and promotes the polymerization of normal microtubules. The polymerization rate of microtubules with GMPCPP-tubulin is very similar to that of GTP-tubulin. However, in contrast to microtubules polymerized with GTP, GMPCPP-microtubules do not depolymerize rapidly after isothermal dilution. The depolymerization rate of GMPCPP-microtubules is 0.1 s-1 compared with 500 s-1 for GDP-microtubules. GMPCPP also completely suppresses dynamic instability. Contrary to previous work, we find that the beta--gamma bond of GMPCPP is hydrolyzed extremely slowly after incorporation into the microtubule lattice, with a rate constant of 4 x 10(-7) s-1. Because GMPCPP hydrolysis is negligible over the course of a polymerization experiment, it can be used to test the role of hydrolysis in microtubule dynamics. Our results provide strong new evidence for the idea that GTP hydrolysis by tubulin is not required for normal polymerization but is essential for depolymerization and thus for dynamic instability. Because GMPCPP strongly promotes spontaneous nucleation of microtubules, we propose that GTP hydrolysis by tubulin also plays the important biological role of inhibiting spontaneous microtubule nucleation.     

Mechanism of GTP hydrolysis at microtubule ends

The kinetics of tubulin subunits incorporation into microtubules and the kinetics of inorganic phosphate release have been measured in parallel. Correlation of the two measurements indicates that the tubulin GTPase activity is due to GTP hydrolysis and exchange at the end of the microtubules. In some cases where the free GTP available in the medium is in-sufficient the rate of GTP hydrolysis is limited by the rate of tubulin-GTP association at the end of the microtubules. The affinity constant of GTP for the microtubule end appears to be 100 times lower than the affinity constant of the tubulin-GTP complex.     

Mechanism of the microtubule GTPase reaction

The rate of GTP hydrolysis by microtubules has been measured at tubulin subunit concentrations where microtubules undergo net disassembly. This was made possible by using microtubules stabilized against disassembly by reaction with ethylene glycol bis-(succinimidylsuccinate) (EGS) as sites for the addition of tubulin-GTP subunits. The tubulin subunit concentration was varied from 25 to 90% of the steady state concentration, and there was no net elongation of stabilized microtubule seeds. The GTPase rate with EGS microtubules was linearly proportional to the tubulin-GTP subunit concentration when this concentration was varied by dilution and by using GDP to compete with GTP for the tubulin E-site. The linear dependence of the rate is consistent with a GTP mechanism in which hydrolysis is coupled to the tubulin-GTP subunit addition to microtubule ends. It is inconsistent with reaction schemes in which: microtubules are capped by a single tubulin-GTP subunit, which hydrolyzes GTP when a tubulin-GTP subunit adds to the end; hydrolysis occurs primarily in subunits at the interface of a tubulin-GTP cap and the tubulin-GDP microtubule core; hydrolysis is not coupled to subunit addition and occurs randomly in subunits in a tubulin-GTP cap. It was also found that GDP inhibition of the microtubule GTPase rate results from GDP competition for GTP at the tubulin subunit E-site. There is no additional effect of GDP on the GTPase rate resulting from exchange into tubulin subunits at microtubule ends.     

Equilibrium studies of a fluorescent paclitaxel derivative binding to microtubules

A fluorescent derivative of paclitaxel, 3'-N-m-aminobenzamido-3'-N-debenzamidopaclitaxel (N-AB-PT), has been prepared in order to probe paclitaxel-microtubule interactions. Fluorescence spectroscopy was used to quantitatively assess the association of N-AB-PT with microtubules. N-AB-PT was found equipotent with paclitaxel in promoting microtubule polymerization. Paclitaxel and N-AB-PT underwent rapid exchange with each other on microtubules assembled from GTP-, GDP-, and GMPCPP-tubulin. The equilibrium binding parameters for N-AB-PT to microtubules assembled from GTP-tubulin were derived through fluorescence titration. N-AB-PT bound to two types of sites on microtubules (K(d1) = 61 +/- 7.0 nM and K(d2) = 3.3 +/- 0.54 microM). The stoichiometry of each site was less than one ligand per tubulin dimer in the microtubule (n(1) = 0.81 +/- 0.03 and n(2) = 0.44 +/- 0.02). The binding experiments were repeated after exchanging the GTP for GDP or for GMPCPP. It was found that N-AB-PT bound to a single site on microtubules assembled from GDP-tubulin with a dissociation constant of 2.5 +/- 0.29 microM, and that N-AB-PT bound to a single site on microtubules assembled from GMPCPP-tubulin with a dissociation constant of 15 +/- 4.0 nM. It therefore appears that microtubules contain two types of binding sites for paclitaxel and that the binding site affinity for paclitaxel depends on the nucleotide content of tubulin. It has been established that paclitaxel binding does not inhibit GTP hydrolysis and microtubules assembled from GTP-tubulin in the presence of paclitaxel contain almost exclusively GDP at the E-site. We propose that although all the subunits of the microtubule at steady state are the same "GDP-tubulin-paclitaxel", they are formed through two paths: paclitaxel binding to a tubulin subunit before its E-site GTP hydrolysis is of high affinity, and paclitaxel binding to a tubulin subunit containing hydrolyzed GDP at its E-site is of low affinity.     

Effect of tubulin self-association on GTP hydrolysis and nucleotide exchange reactions

We investigated how the self-association of isolated tubulin dimers affects the rate of GTP hydrolysis and the equilibrium of nucleotide exchange. Both reactions are relevant for microtubule (MT) dynamics. We used HPLC to determine the concentrations of GDP and GTP and thereby the GTPase activity of SEC-eluted tubulin dimers in assembly buffer solution, free of glycerol and tubulin aggregates. When GTP hydrolysis was negligible, the nucleotide exchange mechanism was studied by determining the concentrations of tubulin-free and tubulin-bound GTP and GDP. We observed no GTP hydrolysis below the critical conditions for MT assembly (either below the critical tubulin concentration and/or at low temperature), despite the assembly of tubulin 1D curved oligomers and single-rings, showing that their assembly did not involve GTP hydrolysis. Under conditions enabling spontaneous slow MT assembly, a slow pseudo-first-order GTP hydrolysis kinetics was detected, limited by the rate of MT assembly. Cryo-TEM images showed that GTP-tubulin 1D oligomers were curved also at 36 °C. Nucleotide exchange depended on the total tubulin concentration and the molar ratio between tubulin-free GDP and GTP. We used a thermodynamic model of isodesmic tubulin self-association, terminated by the formation of tubulin single-rings to determine the molar fractions of dimers with exposed and buried nucleotide exchangeable sites (E-sites). Our analysis shows that the GDP to GTP exchange reaction equilibrium constant was an order-of-magnitude larger for tubulin dimers with exposed E-sites than for assembled dimers with buried E-sites. This conclusion may have implications on the dynamics at the tip of the MT plus end.     

Use of a GTP photoaffinity probe to resolve aspects of the mechanism of tubulin polymerization.

8-Azidoguanosine 5'-triphosphate (8-N3GTP) was used in a photoactivatable probe to examine the role of GTP in microtubule assembly. 8-N3GTP was able to substitute for GTP in the promotion of tubulin polymerization and was hydrolyzed at 37 degrees C in the presence or absence of colchicine or calcium. Photolysis of the analog in the presence of microtubular protein resulted in its covalent incorporation onto a GTP-specific site of the beta monomer. The efficiency of this incorporation was different when 8-N3GDP (which does not affect polymerization) was used in place of 8-N3GTP, implying a different orientation of the nucleoside diphosphate within the receptor site. During microtubule assembly, 8-N3GTP was hydrolyzed in situ at the tubulin-GTP exchangeable site in a process that was dependent upon polymerization. The use of [beta, gamma-32P]8-N3GTP and [gamma-32P]8-N3GTP indicated that this hydrolysis occurred concurrently with polymerization and that only nucleoside diphosphate remained bound to the polymerized tubulin.     

Effects of pH on tubulin-nucleotide interactions

Significant GTP-independent, temperature-dependent turbidity development occurs with purified tubulin stored in the absence of unbound nucleotide, and this can be minimized with a higher reaction pH. Since microtubule assembly is optimal at lower pH values, we examined pH effects on tubulin-nucleotide interactions. While the lowest concentration of GTP required for assembly changed little, GDP was more inhibitory at higher pH values. The amounts of exogenous GTP bound to tubulin at all pH values were similar, but the amounts of exogenous GDP bound and endogenous GDP (i.e., GDP originally bound in the exchangeable site) retained by tubulin rose as reaction pH increased. Endogenous GDP was more efficiently displaced by exogenous GTP than GDP at all pH values, but displacement by GTP was 10-15% greater at pH 6 than at pH 7. Dissociation constants for GDP and GTP were about 1.0 microM at pH 6 and 0.02 microM at pH 7. A small increase in the affinity of GDP relative to that of GTP occurs at pH 7 as compared to pH 6, together with a 50-fold absolute increase in the affinity of both nucleotides for tubulin at pH 7. The time courses of microtubule assembly and GTP hydrolysis were compared at pH 6 and pH 7. At pH 6, the two reactions were simultaneous in onset and initially stoichiometric. At pH 7, although the reactions began simultaneously, hydrolysis seemed to lag substantially behind assembly. Unhydrolyzed radiolabeled GTP was not incorporated into microtubules, however, indicating that GTP hydrolysis is actually closely coupled to assembly. The apparent lag in hydrolysis probably results from a methodological artifact rather than incorporation of GTP into the microtubule with delayed hydrolysis.     

Dephosphorylation of tubulin-bound guanosine triphosphate during microtubule assembly.

1. Tubulin purified from porcine brain in the presence of GTP contained 0.16 mole of GDP and 0.73 mole of GTP per 60,000 g of protein. 2. Microtubules reconstituted from the purified tubulin contained 0.43 mole of GDP and 0.41 mole of GTP per 60,000 g of protein. Guanine nucleotide bound to the exchangeable site of tubulin was converted to GDP during microtubule assembly, while GTP at the non-exchangeable site remained intact. 3. Guanine nucleotide which had been bound to the exchangeable site of tubulin before microtubule assembly was also exchangeable during disassembly.     

Nucleotide binding and phosphorylation in microtubule assembly in vitro.

Two non-hydrolyzable analogs of GTP, guanylyl-β,γ-methylene diphosphonate and guanylyl imidodiphosphate, have been found to induce rapid and efficient microtubule assembly in vitro by binding at the exchangeable site (E-site) on tubulin. Characterization of microtubule polymerization by several criteria, including polymerization kinetics, nucleotide binding to depolymerized and polymerized microtubules, and microtubule stability, reveals strong similarities between microtubule assembly induced by GTP and non-hydrolyzable GTP analogs. Nucleoside triphosphates which bind weakly or not at all to tubulin, such as ATP, UTP and CTP, are shown to induce microtubule assembly by means of a nucleoside diphosphate kinase (NDP-kinase, EC 2.7.4.6.) activity which is not intrinsic to tubulin. The NDP-kinase mediates microtubule polymerization by phosphorylating tubulin-bound GDP in situ at the E-site. Although hydrolysis of exchangeably bound GTP occurs, it is found to be uncoupled from the polymerization reaction. The non-exchangeable nucleotide binding site on tubulin (N-site) is not directly involved in microtubule assembly in vitro. The N-site is shown to contain almost exclusively GTP which is not hydrolyzed during microtubule assembly. A scheme is presented in which GTP acts as an allosteric effector at the E-site during microtubule assembly in vitro.     

On the role of the tubulin nonexchangeable GTP site in bovine neurotubule assembly.

A procedure for radiolabeling the terminal phosphoryl group of the tubulin nonexchangeable GTP site using bacterial acetate kinase and acetyl-32P is described. Warming such samples to 37 degrees results in microtubule assembly and hydrolysis of the nonexchangeable site GTP in a parallel fashion. Removal of the microtubule-associated protein fraction from lebeled tubulin prevents hydrolysis and assembly, and recombination of these components restores both processes again in a parallel fashion. These and other experiments indicate that the nonexchangeable site GTP hydrolysis and assembly are intimately linked. The experiments also demonstrate that GRP is not required at the exchangeable nucleotide site for assembly to occur.     

Head-to-tail polymerization of microtubules in vitro

The kinetics of microtubule polymerization to steady-state and the ability of tubulin subunits to exchange with polymer at steady-state were examined to determine the applicability of the head-to-tail polymerization mechanism (Wegner, 1976) to microtubule assembly in vitro. Under conditions where self-nucleation was a rare event, tubulin was induced to polymerize by the addition of short microtubule fragments, and the kinetics of elongation were analyzed as a pseudofirst-order reaction. At steady-state, a trace amount of [³H]tubulin, prepared by labeling in vivo of chick brain protein, was added to polymerized microtubules and the kinetics of label uptake into polymer were monitored by a rapid centrifugal assay. The isotope exchange kinetics were analyzed according to a theoretical model previously applied to actin polymerization (Wegner, 1976) and extended for the case of microtubule polymerization. The rate of head-to-tail polymerization, expressed as the steady-state subunit flux, was 27·6 ± 7·6 per second at 37 °C. The head-to-tail parameter s, a measure of the efficiency of subunit flux, was 0·26 ± 0·07, indicating that four association and four dissociation events resulted in the flux of one subunit through the polymer at steady-state.The role of GTP in this mechanism of microtubule polymerization was examined by replacement of the nucleotide occupying the exchangeable binding site of tubulin with the non-hydrolyzable GTP analog guanosine 5′-(β,γ-methylene)triphosphate. It was found that the rate of steady-state flux was reduced by two orders of magnitude compared to tubulin polymerized with GTP. The head-to-tail parameter approached its limiting value of zero, indicating greatly reduced efficiency of subunit flux through the polymer in the presence of this analog.In summary, this study demonstrates that microtubules exhibit significant headto-tail polymerization in the presence of GTP and, in keeping with theoretical considerations, provides evidence that nucleotide hydrolysis is required for subunit flux through the polymer.     

Molecular dissection of GTP exchange and hydrolysis within the ternary complex of tubulin heterodimers and Op18/stathmin family members

The ubiquitous Op18 and the neural RB3 and SCG10 proteins are members of the oncoprotein18/stathmin family of microtubule regulators. These proteins bind two tubulin heterodimers via two imperfect helical repeats to form a complex of heterodimers aligned head-to-tail. Here we have analyzed GTP exchange and GTP hydrolysis at the exchangeable GTP-binding site (E-site) of tubulin heterodimers in complex with Op18, RB3, or SCG10. These proteins stimulate a low and indistinguishable rate of GTP hydrolysis, and our results show that GTP exchange is blocked at both E-sites of the ternary complex, whereas GTP hydrolysis only occurs at one of the two E-sites. Results from mutational analysis of clusters of hydrophobic residues within the first helical repeat of Op18 suggest that GTP is hydrolyzed at the E-site that is interfaced between the head-to-tail arranged heterodimers, which is consistent with predicted GTPase productive interactions between the two tubulin heterodimers. Our mutational analysis has also indicated that Op18/stathmin family members actively restrain the otherwise potent GTPase productive interactions that are generated by longitudinal interactions within protofilaments. We conclude that tubulin heterodimers in complex with Op18/stathmin family members are subject to allosteric effects that prevent futile cycles of GTP hydrolysis.     

Guanosine 5'-O-(3-thiotriphosphate), a potent nucleotide inhibitor of microtubule assembly

Guanosine 5'-O-(3-thiotriphosphate) (GTP gamma S) and the two diastereoisomers of guanosine 5'-O-(2-thiotriphosphate) (GTP beta S) were prepared enzymatically, and their interactions with tubulin and microtubule-associated proteins (MAPs) in 0.1 M 2-(N-morpholino)ethanesulfonate, 0.5 mM MgCl2 were examined. GTP gamma S did not support microtubule assembly but instead inhibited the reaction. This analog was 1.5-2 times more potent than GDP in inhibiting both tubulin polymerization and GTP hydrolysis under conditions in which these reactions were dependent on MAPs. In contrast to the analog's inhibitory effects on polymerization and hydrolysis, however, radiolabeled GTP gamma S was only feebly bound by purified tubulin at 0 degrees C relative to the binding of GDP and GTP. There was a marked increase in the amount of GTP gamma S bound when the reaction temperature was raised to 37 degrees C or when MAPs were included in the reaction mixture. Only when both MAPs were present and the higher reaction temperature was used did the binding of GTP gamma S exceed that of GDP. Since substitution of sulfur for oxygen in a molecule should decrease its hydrophilic properties, these findings suggest that the exchangeable nucleotide binding site of tubulin becomes more hydrophobic at higher temperatures and in the presence of MAPs. The two isomers of GTP beta S were able to support MAP-dependent polymerization, although a 50-100-fold higher concentration of the analogs as compared to GTP was required. Neither isomer of GTP beta S had a significant inhibitory effect on GTP hydrolysis dependent on tubulin + MAPs.     

GTP hydrolysis during microtubule assembly

The GTP cap model of dynamic instability [Mitchison, T., & Kirschner, M.W. (1984) Nature (London) 312, 237] postulates that a GTP cap at the end of most microtubules stabilizes the polymer and allows continuing assembly of GTP-tubulin subunits while microtubules without a cap rapidly disassemble. This attractive explanation for observed microtubule behavior is based on the suggestion that hydrolysis of GTP is not coupled to assembly but rather takes place as a first-order reaction after a subunit is assembled onto a polymer end. Carlier and Pantaloni [Carlier, M., & Pantaloni, D. (1981) Biochemistry 20, 1918] reported a lag of hydrolysis behind microtubule assembly and a first-order rate constant for hydrolysis (kh) of 0.25/min. A lag has not been demonstrated by other investigators, and a kh value that specifies such a slow rate of hydrolysis is difficult to reconcile with reported steady-state microtubule growth rates and frequencies of disassembly. We have looked for a lag using tubulin free of microtubule-associated protein at concentrations of 18.5-74 microM, assembly with and without glycerol, and two independent assays of GTP hydrolysis. No lag was observed under any of the conditions employed, with initial rates of hydrolysis increasing in proportion to rates of assembly. If hydrolysis is uncoupled from assembly, we estimate that kh must be at least 2.5/min and could be much greater, a result that we argue may be advantageous to the GTP cap model. We also describe a preliminary model of assembly coupled to hydrolysis that specifies formation and loss of a GTP cap, thus allowing dynamic instability.     

Taxol binds to polymerized tubulin in vitro

Taxol, a natural plant product that enhances the rate and extent of microtubule assembly in vitro and stabilizes microtubules in vitro and in cells, was labeled with tritium by catalytic exchange with (3)H(2)O. The binding of [(3)H]taxol to microtubule protein was studied by a sedimentation assay. Microtubules assembled in the presence of [(3)H]taxol bind drug specifically with an apparent binding constant, K(app), of 8.7 x 19(-7) M and binding saturates with a calculated maximal binding ration, B(max), of 0.6 mol taxol bound/mol tubulin dimer. [(3)H]Taxol also binds and assembles phosphocellulose-purified tubulin, and we suggest that taxol stabilizes interactions between dimers that lead to microtubule polymer formation. With both microtubule protein and phosphocellulose- purified tubulin, binding saturation occurs at approximate stoichiometry with the tubulin dimmer concentration. Under assembly conditions, podophyllotoxin and vinblastine inhibit the binding of [(3)H]taxol to microtubule protein in a complex manner which we believe reflects a competition between these drugs, not for a single binding site, but for different forms (dimer and polymer) of tubulin. Steady-state microtubules assembled with GTP or with 5’-guanylyl-α,β-methylene diphosphonate (GPCPP), a GTP analog reported to inhibit microtubule treadmilling (I.V. Sandoval and K. Weber. 1980. J. Biol. Chem. 255:6966-6974), bind [(3)H]taxol with approximately the same stoichiometry as microtubules assembled in the presence of [(3)H]taxol. Such data indicate that a taxol binding site exists on the intact microtubule. Unlabeled taxol competitively displaces [(3)H]taxol from microtubules, while podophyllotoxin, vinblastine, and CaCl(2) do not. Podophyllotoxin and vinblastine, however, reduce the mass of sedimented taxol-stabilized microtubules, but the specific activity of bound [(3)H]taxol in the pellet remains constant. We conclude that taxol binds specifically and reversibly to a polymerized form of tubulin with a stoichiometry approaching unity.     

Magnesium requirements for guanosine 5'-O-(3-thiotriphosphate) induced assembly of microtubule protein and tubulin

Two conflicting interpretations on the role of guanosine 5'-O-(3-thiotriphosphate) (GTP gamma S) in microtubule protein and tubulin assembly have been previously reported. One study finds that GTP gamma S promotes assembly while another study reports that GTP gamma S is a potent inhibitor of microtubule assembly. We have examined the potential role of Mg2+ to learn if the conflicting interpretations are due to a metal effect. Turbidity, electron microscopy, and nucleotide binding and hydrolysis were used to analyze the effect of the Mg2+ concentration on GTP gamma S-induced assembly of microtubule protein (tubulin + microtubule-associated proteins) in the presence of buffer +/- 30% glycerol and in buffer with GTP added before or after GTP gamma S. GTP gamma S substantially lowers the Mg2+ concentration required to induce cross-linked or clustered rings of tubulin. These cross-linked rings do not assemble well into microtubules, and GTP only partially restores microtubule assembly. However, taxol will promote GTP gamma S-induced cross-linked rings of microtubule protein to assemble into microtubules. The effect of GTP gamma S on microtubule protein assembly in the presence of Zn2+ with and without added Mg2+ suggests that GTP gamma S also effects the formation of Zn2+-induced sheet aggregates. Purified tubulin was used in assembly experiments with Mg2+, Zn2+, and taxol to better understand GTP gamma S interactions with tubulin. The optimal Mg2+ concentration for assembly of tubulin is lower with GTP gamma S than with GTP.(ABSTRACT TRUNCATED AT 250 WORDS)     

A Thermodynamic Model of Microtubule Assembly and Disassembly

Microtubules are self-assembling polymers whose dynamics are essential for the normal function of cellular processes including chromosome separation and cytokinesis. Therefore understanding what factors effect microtubule growth is fundamental to our understanding of the control of microtubule based processes. An important factor that determines the status of a microtubule, whether it is growing or shrinking, is the length of the GTP tubulin microtubule cap. Here, we derive a Monte Carlo model of the assembly and disassembly of microtubules. We use thermodynamic laws to reduce the number of parameters of our model and, in particular, we take into account the contribution of water to the entropy of the system. We fit all parameters of the model from published experimental data using the GTP tubulin dimer attachment rate and the lateral and longitudinal binding energies of GTP and GDP tubulin dimers at both ends. Also we calculate and incorporate the GTP hydrolysis rate. We have applied our model and can mimic published experimental data, which formerly suggested a single layer GTP tubulin dimer microtubule cap, to show that these data demonstrate that the GTP cap can fluctuate and can be several microns long.