Diversity of bacterial strains degrading hexadecane in relation to the mode of substrate uptake

The relative distribution of the modes of hydrocarbon uptake, used by bacteria of the environment for the degradation of long-chain alkanes, has been evaluated. The first mode of uptake, direct interfacial accession, involves contact of cells with hydrocarbon droplets. In the second mode, biosurfactant-mediated transfer, cell contact takes place with hydrocarbons emulsified or solubilized by biosurfactants. Sixty-one strains growing on hexadecane were isolated from polluted and non-polluted soils and identified. The majority (61%) belonged to the Corynebacterium-Mycobacterium-Nocardia group. Criteria selected for characterizing hexadecane uptake were cell hydrophobicity, interfacial and surface tensions and production of glycolipidic extracellular biosurfactants. These properties were determined in flask cultures on an insoluble (hexadecane) and on a soluble (glycerol or succinate) carbon source for a subset of 23 representative strains. Exclusive direct interfacial uptake was utilized by 47% of studied strains. A large proportion of strains (53%) produced biosurfactants. The data on cellular hydrophobicity suggested the existence of two distinct alkane transfer mechanisms in this group. Accordingly, tentative assignments of biosurfactant-mediated micellar transfer were made for 11% of the isolated strains, and of biosurfactant-enhanced interfacial uptake for 42%.     

Hydrophobicity development,alkane oxidation,and crude-oil emulsification in a Rhodococcus species

The relationship between the phenomena alkane oxidation, extreme hydrophobicity of the cell surface, and crude-oil emulsification in Rhodococcus sp. strain 094 was investigated. Compounds that induce the emulsifying ability simultaneously induced the cytochrome P450-containing alkane oxidizing system and the transition from low to high cell-surface hydrophobicity. Exposed to inducers of crude-oil emulsification, the cells developed a strong hydrophobic character during exponential growth, which was rapidly lost when entering stationary phase. The loss in hydrophobicity coincided in time with the crude-oil emulsification, indicating that the components responsible for the formation of cell-surface hydrophobicity act as excellent emulsion stabilisers only after release from the cells. Rhodococcus sp. strain 094 possessed three distinct levels of cell-surface hydrophobicity. One level of low hydrophobicity was characteristic of cells in late stationary phase and was independent of growth substrate. A second and more hydrophobic level was observed for cells in exponential phase grown on water-soluble substrates, while a third level, characterised by extreme cell hydrophobicity, was observed for cells in exponential phase cultivated on hydrophobic substrates such as hexadecane. The production of the oil-emulsifying agents seems to require external sources of nitrogen and phosphate.     

Cell surface properties of five polycyclic aromatic compound-degrading yeast strains

To investigate the effects of physiological properties on polycyclic aromatic compound (PAH) degradation, the surface tension and emulsification activities, and cell surface hydrophobicity of five PAH-degrading yeast isolates were compared to Saccharomyces cerevisiae from cultures grown with glucose, hexadecane, or naphthalene as carbon sources. The cell surface hydrophobicity values for the five yeast strains were significantly higher than for S. cerevisiae for all culture conditions, although these were highest with hexadecane and naphthalene. Strains with higher hydrophobicity showed higher rates of naphthalene and phenanthrene degradation, indicating that increased cell hydrophobicity might be an important strategy in PAH degradation for the five strains. Emulsification activities increased for all five yeast strains with naphthalene culturing, although no relationship existed between emulsification activity and PAH degradation rate. Surface tensions were not markedly reduced with naphthalene culturing.     

Role of rhamnolipid biosurfactants in the uptake and mineralization of hexadecane in Pseudomonas aeruginosa

A study was undertaken to investigate the mechanisms for biosurfactant-enhanced hexadecane uptake into Pseudomonas aeruginosa. Two strains of Ps. aeruginosa were studied, one producing rhamnolipids (PG201) and the other rhamnolipid deficient (UO299). Rhamnolipids produced by PG201 acted to increase the solubility of n-hexadecane in the culture medium (from 1.84 to 22.76 microg l(-1). Rates of(l4)C-n-hexadecane uptake and mineralization were higher in PG201 than in UO299. However, the degree of difference was lower than expected. Additional studies were carried out on the cell surface properties of the two strains. During growth on n-hexadecane, the cell surface hydrophobicity of both PG201 (50.5%) and UO299 (33.7%) increased compared with that observed in water-soluble growth substrates (7-8%). Studies were also carried out to ascertain any energy requirements for the transport of n-hexadecane into Ps. aeruginosa cells. The addition of CCCP (an inhibitor of cytochrome oxidase which thereby blocks oxidative phosphorylation) at a range of concentrations caused a marked decrease in n-hexadecane uptake, indicating that n-hexadecane uptake in Ps. aeruginosa is an energy-dependent process. These studies support the hypothesis of alkane transport into microbial cells by direct contact with larger alkane droplets and by pseudosolubilization. Also, it appears that both mechanisms occur simultaneously.     

Biosurfactants,an help in the biodegradation of hexadecane? The case of <Emphasis Type="Italic">Rhodococcus</Emphasis> and <Emphasis Type="Italic">Pseudomonas</Emphasis> strains

The roles of the extracellular biosurfactants produced by two bacterial strains, Pseudomonas aeruginosa GL1 and Rhodococcus equi Ou2, in hexadecane uptake and biodegradation were compared. For this purpose, cell hydrophobicity and production of glycolipidic biosurfactants were evaluated during bacterial growth on hexadecane, as well the effects of these biosurfactants on culture supernatants properties i.e., surface and interfacial tensions, and emulsification and pseudosolubilization capacities. The results showed that the role of biosurfactants was different in these two strains and was directly related to the hydrophobicity of the bacterial cells concerned. Extracellular biosurfactants produced by strain R. equi Ou2 had only a minor role in hexadecane degradation. Direct interfacial accession appeared to be the main mechanism for hexadecane uptake by the hydrophobic cells of strain R. equi Ou2. On the contrary, the biosurfactants produced by P. aeruginosa GL1 were required for growth on hexadecane, and their pseudosolubilization capacity rather than their emulsification capacity was involved in substrate degradation, allowing uptake from hexadecane micelles by the hydrophilic cells of this bacterium. The roles of biosurfactants thus differ widely among bacteria degrading hydrophobic compounds. J.-P. Vandecasteele—in retirement     

The influence of saliva on the hydrophobic surface properties of bacteria isolated from oral sites of macaque monkeys

Abstract The surface hydrophobicity of 64 bacterial strains isolated from discrete, intra-oral sites of monkeys ( Macaca fascicularis ) was determined by measuring their affinity for hexadecane. Bacteria were also exposed to monkey saliva which either increased or reduced the surface hydrophobicity of the cells. After exposure to saliva those bacteria isolated solely from the mucosal surfaces were significantly more hydrophobic than bacteria ( Streptococcus mutans and Actinomyces spp.) whose major habitat was the dentition. Streptococcus sanguis strains isolated from all intra-oral sites and among the early plaque formers were as hydrophobic as the organisms isolated only from the mucosal surfaces.     

Determination of the cell surface hydrophobicity of oral bacteria using a modified hydrocarbon adherence method

Abstract Hydrophobic interactions between bacterial cell surfaces and colonisable substrates have been implicated in the mechanisms of bacterial adherence. However, current methods of assessing bacterial hydrophobicity as a function of adherence to liquid hydrocarbons (especially hexadecane) do not always produce accurate or reproducible results. Therefore, the present technique was developed using xylene. The hydrophobic surface properties of fresh and type strains of Bacteriodes gingivalis, Bacteriodes intermedius, Capnocytophaga spp., Streptococcus salivarius and Streptococcus sanguis suspended either in saliva ions buffer (SIB) or in saliva diluted in SIB were measured. In SIB the test strains were predominantly hydrophobic. The addition of saliva caused a significant reduction ( P < 0.05) in hydrophobicity compared to SIB alone, with 80% of the strains tested. Since oral bacteria will be suspended in saliva in vivo, it is concluded that bacteria in the oral cavity may be less hydrophobic than previous studies have suggested.     

Production and properties of biosurfactants from a newly isolated Pseudomonas fluorescens HW-6 growing on hexadecane

The newly isolated from industrial wastewater Pseudomonas fluorescens strain HW-6 produced glycolipid biosurfactants at high concentrations (1.4-2.0 g l(-1)) when grown on hexadecane as a sole carbon source. Biosurfactants decreased the surface tension of the air/ water interface by 35 mN m(-1) and possessed a low critical micelle concentration value of 20 mg l(-1), which indicated high surface activity. They efficiently emulsified aromatic hydrocarbons, kerosene, n-paraffins and mineral oils. Biosurfactant production contributed to a significant increase in cell hydrophobicity correlated with an increased growth of the strain on hexadecane. The results suggested that the newly isolated strain of Ps. fluorescens and produced glycolipid biosurfactants with effective surface and emulsifying properties are very promising and could find application for bioremediation of hydrocarbon-polluted sites.     

铜绿假单胞菌对长链烷烃的摄取模式

研究了一株铜绿假单胞菌(CGMCC 1.1785)摄取长链烷烃的模式。铜绿假单胞菌1．1785能够以固态的长链烷烃为唯一碳源生长,在培养过程中产生表面活性代谢物。烃与水相的界面面积是细菌生长重要的影响因素,说明传质限制的存在。由于该菌不能够利用鼠李糖脂增溶的烃作为碳源,因此添加鼠李糖脂能够强化烃摄取的主要原因是烃界面的扩大。细胞表面疏水性从开始的急剧升高到后来的不断下降,说明在不同生长阶段细胞对烃的摄取模式是不同的。由此认为,铜绿假单胞菌1.1785既没有通过表面活性剂介导模式获取烃,也并非完全通过直接接触模式获取烃。据此提出该菌采用了一种运动接触的烃摄取模式,其趋化运动能力在这种摄取过程中起到重要作用。     

Biodegradation of phenanthrene and analysis of degrading cultures in the presence of a model organo-mineral matrix and of a simulated NAPL phase

Two mixed bacterial cultures (C_B-BT and C_I-AT) degraded phenanthrene when it was: (i) in the presence of either hexadecane as a non aqueous phase liquid or a montmorillonite–Al(OH)x-humic acid complex as a model organo-mineral matrix; (ii) sorbed to the complex, either alone or in the presence of hexadecane. The cultures had different kinetic behaviours towards phenanthrene with or without hexadecane. The degradation of Phe alone as well as that of Phe in hexadecane ended in 8 and 15 days with C_B-BT and C_I-AT cultures, respectively. Hexadecane increased Phe bioavailability for C_I-AT bacteria which degraded Phe according to first-order kinetics. The same effect was observed for C_B-BT bacteria, but with an initial 2 days lag phase and in accordance with zero-order kinetics. The presence of hexadecane did not affect the degradation of phenanthrene sorbed and aged on the complex by C_I-AT culture. This capability was exhibited also after experimental aging of 30 days. The dynamics of the bacterial community composition was investigated through PCR-DGGE (denaturing gradient gel electrophoresis) of 16S rRNA gene fragments. Individual bands changed their intensity during the incubation time, implying that particular microbe’s relative abundance changed according to the culture conditions. Isolation of phenanthrene and/or hexadecane degraders was in accord with cultivation-independent data. Growth-dependent changes in the cell surface hydrophobicity of the two cultures and of the isolates suggested that modulation of cell surface hydrophobicity probably played an important role for an efficient phenanthrene assimilation/uptake.     

Cell-surface hydrophobicity of adherent oral bacteria

Adherent bacteria were released from the surfaces of four freshly extracted teeth by mild sonic oscillation, and screened for cell-surface hydrophobicity on the basis of their ability to adhere to hexadecane. Of the 103 tooth isolates examined, 82 adhered to the test hydrocarbon. Hydrophobic bacteria could similarly be isolated from the stainless steel dental matrix bands following brief incubation in the mouth of a volunteer; 30 of 52 isolates examined adhered to hexadecane. Among those strains which adhered to hexadecane, streptococci were the most frequent type isolated. Various other morphological types were also observed, including cocci, bacilli, coryneforms, and filamentous bacteria. The high overall proportion of hydrophobic bacteria found in this study (72%) suggests that cell-surface hydrophobicity may play a role in adherence of certain oral species to the tooth surface.     

Comparison of contact angles and adhesion to hexadecane of urogenital, dairy, and poultry lactobacilli: effect of serial culture passages.

The aim of this study was to examine the hydrophobicities of 23 urogenital, dairy, poultry, and American Type Culture Collection isolates of lactobacilli and to determine the effect on hydrophobicity of serially passaging the strains in liquid medium. To this end, strains were grown after isolation and identification and then serially passaged up to 20 times. Hydrophobicity was assessed through contact angle measurements on lawns of cells by using water, formamide, methylene iodide, 1-bromonaphthalene, and hexadecane as wetting agents and through measurement of their partitioning in a hexadecane-water system. The hydrophobicities of these strains varied widely, with Lactobacillus casei strains being predominantly hydrophilic and L. acidophilus strains being mostly hydrophobic. For some isolates, serial passaging was accompanied by a clear loss of hydrophobic surface properties, whereas for other strains, cultures became heterogeneous in that some cells had already lost their hydrophobic surface properties while others were still hydrophobic. Adhesion of this collection of lactobacilli to hexadecane droplets in microbial adhesion to hexadecane (MATH) tests was driven by their aversion to water rather than by their affinity for hexadecane, as concluded from the fact that hexadecane contact angles were zero for all strains. Furthermore, adhesion of the lactobacilli to hexadecane in MATH tests occurred only when the water contact angle on the cells was above 60 degrees.     

Comparison of contact angles and adhesion to hexadecane of urogenital, dairy, and poultry lactobacilli: effect of serial culture passages.

The aim of this study was to examine the hydrophobicities of 23 urogenital, dairy, poultry, and American Type Culture Collection isolates of lactobacilli and to determine the effect on hydrophobicity of serially passaging the strains in liquid medium. To this end, strains were grown after isolation and identification and then serially passaged up to 20 times. Hydrophobicity was assessed through contact angle measurements on lawns of cells by using water, formamide, methylene iodide, 1-bromonaphthalene, and hexadecane as wetting agents and through measurement of their partitioning in a hexadecane-water system. The hydrophobicities of these strains varied widely, with Lactobacillus casei strains being predominantly hydrophilic and L. acidophilus strains being mostly hydrophobic. For some isolates, serial passaging was accompanied by a clear loss of hydrophobic surface properties, whereas for other strains, cultures became heterogeneous in that some cells had already lost their hydrophobic surface properties while others were still hydrophobic. Adhesion of this collection of lactobacilli to hexadecane droplets in microbial adhesion to hexadecane (MATH) tests was driven by their aversion to water rather than by their affinity for hexadecane, as concluded from the fact that hexadecane contact angles were zero for all strains. Furthermore, adhesion of the lactobacilli to hexadecane in MATH tests occurred only when the water contact angle on the cells was above 60 degrees.     

Lack of correlation between fibrils, hydrophobicity and adhesion for strains of Streptococcus sanguis biotypes I and II

Fifteen strains of Streptococcus sanguis biotype I and eight strains of Streptococcus sanguis biotype II with peritrichous fibrils, tufts of fibrils or a mixture of fibrils and fimbriae on the cell surface, were tested for their ability to adhere to saliva coated spheroidal hydroxyapatite (S-SHA) in a radiolabelled assay. S. sanguis I strains adhered better than S. sanguis II strains and peritrichously fibrillar strains generally adhered better than tufted strains. There was no correlation between the density of fibrillation and adhesion. The only highly adherent strain of S. sanguis II carried fimbriae in addition to fibrils. No correlation was observed between cell surface hydrophobicity as measured by phase partitioning with hexadecane and adhesion to S-SHA.     

南海深海沉积物烷烃降解菌的富集分离与多样性初步分析

通过培养和非培养2种手段研究了南海沉积物中石油降解菌的多样性。通过烷烃富集培养,从2个站点不同深度的南海沉积物样品中富集筛选出48株深海细菌,其中27株对十六烷有降解能力。表面张力测定结果表明,4株降解菌同时具有较强的表面活性剂产生能力,2株Dietzia maris菌能使水的表面张力降至33mN/m左右,这是该种微生物产表面活性剂的首次报道。通过变性梯度凝胶电泳(DGGE)分析显示,南海沉积物富集物中的烷烃降解菌优势菌是芽孢杆菌,而且有多种。其中,Bacillus aquimaris在两个站点的7个样品的富集物中都是优势菌。此外,Sporosarcina,Halomona以及Brevibacterium属的细菌在不同样品中也表现为除Bacillus之外的优势菌。     

Characterization of hydrocarbon emulsification and solubilization occurring during the growth of Endomycopsis lipolytica on hydrocarbons

A comparative characterization of the phenomena of hydrocarbon emulsification and solubilization taking place during the growth of Endomycopsis lipolytica on n-alkanes and alkenes was made. Evidence was obtained for the cellular production of different factors involved in emulsification and solubilization of hydrocarbons. It was shown that the production of these factors closely followed cell growth. The inducible nature of the alkane solubilizing factor was demonstrated using actidione as inhibitor. Whereas emulsifying factor was demonstrated using actidione as inhibitor. Whereas emulsifying factors showed a broad affinity to some particular hydrocarbons, solubilizing factor was found to be highly specific for the particular hydrocarbon on which the cells were grown. The emulsifying factor was heat stable whereas the solubilizing factor was highly unstable even at ?4°C. Metal-ion chelating agents strongly inhibited the activity of both of the factors. A crude isolate of the alkane emulsifying factor was obtained and its peptide characteristics were demonstrated. Using EDTA as an inhibitor for the emulsification–solubilization activity, evidence was obtained for the predominent role played by the emulsification–solubilization mechanism in the uptake of alkane by yeast cells.     

Effect of Rhamnolipid (Biosurfactant) Structure on Solubilization and Biodegradation of n-Alkanes

A study to quantify the effect of rhamnolipid biosurfactant structure on the degradation of alkanes by a variety of Pseudomonas isolates was conducted. Two dirhamnolipids were studied, a methyl ester form (dR-Me) and an acid form (dR-A). These rhamnolipids have different properties with respect to interfacial tension, solubility, and charge. For example, the interfacial tension between hexadecane and water was decreased to <0.1 dyne/cm by the dR-Me but was only decreased to 5 dyne/cm by the dR-A. Solubilization and biodegradation of two alkanes in different physical states, liquid and solid, were determined at dirhamnolipid concentrations ranging from 0.01 to 0.1 mM (7 to 70 mg/liter). The dR-Me markedly enhanced hexadecane (liquid) and octadecane (solid) degradation by seven different Pseudomonas strains. For an eighth strain tested, which exhibited extremely high cell surface hydrophobicity, hexadecane degradation was enhanced but octadecane degradation was inhibited. The dR-A also enhanced hexadecane degradation by all degraders but did so more modestly than the dR-Me. For octadecane, the dR-A only enhanced degradation by strains with low cell surface hydrophobicity.     

The hydrophobicity of 'viridans' streptococci isolated from the human mouth

The hydrophobicity of human oral streptococci was measured with the hexadecane assay modified by the incorporation of polyethylene glycol 6000. Large variability in the hydrophobicity between cultures of some strains grown on different occasions was observed whereas other strains were less variable. The variation in hydrophobicity was significantly reduced by growing the cells in continuous culture in a chemostat under glucose-limiting conditions. The Streptococcus mutans strains used all had low hydrophobicity and the mean hydrophobicity of this species was significantly lower ( P < 0.05) than the mean hydrophobicity of Strep. salivarius, Strep. sanguis Type I and Strep. sanguis Type II strains. This finding supports the view that hydrophobicity is a contributing factor in the adhesion of viridans streptococci to oral surfaces.     

The hydrophobicity of 'viridans' streptococci isolated from the human mouth

The hydrophobicity of human oral streptococci was measured with the hexadecane assay modified by the incorporation of polyethylene glycol 6000. Large variability in the hydrophobicity between cultures of some strains grown on different occasions was observed whereas other strains were less variable. The variation in hydrophobicity was significantly reduced by growing the cells in continuous culture in a chemostat under glucose-limiting conditions. The Streptococcus mutans strains used all had low hydrophobicity and the mean hydrophobicity of this species was significantly lower (P less than 0.05) than the mean hydrophobicity of Strep. salivarius, Strep. sanguis Type I and Strep. sanguis Type II strains. This finding supports the view that hydrophobicity is a contributing factor in the adhesion of viridans streptococci to oral surfaces.     

A comparison of various methods to determine hydrophobic properties of streptococcal cell surfaces

In order to determine whether various methods which are commonly applied to determine the hydrophobicity of bacterial cell surfaces yield similar results, the hydrophobicity of a range of oral streptococcal isolates was measured using various methods including adsorption to hexadecane, hydrophobic interaction chromatography, salt-aggregation and contact angle measurements. In addition the zela potential and the adhesion to saliva-coated hydroxyapatite were determined. To compare the results of the different methods, linear and rank correlation coefficients were calculated. The resulting correlations were weak when applied to the whole range of strains even in those cases where the tests are expected to probe the same surface characteristics. However, generally good correlations were obtained when a set of strains was examined which were derived from a single parent strain and which only differed in defined surface structures. Accordingly it must be concluded from the methods applied here, that if is not possible to define the surface ‘hydrophobicity’ of a bacterium other than on a comparative level with closely related strains. No clear correlation was found between any hydrophobicity test and the adhesion to saliva-coated hydroxyapatite.