Influence of temperature on the number of Legionella pneumophila in hot water systems

The occurrence of legionella in the hot water systems of two buildings (A and B) was investigated in relation to the water temperature. The peripheral parts of both hot water systems were found to be colonized by these organisms. A temperature of 60 degrees C in the hot water mains returning from the building eliminated legionellas from the mains as well as from the peripheral taps and showers. Legionellas could be isolated from taps, showers and the mains when the temperature in the return mains was kept at 54 degrees C. The hot water systems could not be completely decontaminated by raising the hot water temperature in the return mains to 70 degrees C combined with flushing all the taps and showers. It is suggested that failure to decontaminate the systems is due to dead ends in the pipeline network, which are not reached by the hot water and that these dead ends are the source for recolonization of the systems.     

Application of standard addition for the determination of carboxypeptidase activity in Actinomucor elegans bran koji

Leucine carboxypeptidase (EC 3.4.16) activity in Actinomucor elegans bran koji was investigated via absorbance at 507 nm after stained by Cd-nihydrin solution, with calibration curve A, which was made by a set of known concentration standard leucine, calibration B, which was made by three sets of known concentration standard leucine solutions with the addition of three concentrations inactive crude enzyme extract, and calibration C, which was made by three sets of known concentration standard leucine solutions with the addition of three concentrations crude enzyme extract. The results indicated that application of pure amino acid standard curve was not a suitable way to determine carboxypeptidase in complicate mixture, and it probably led to overestimated carboxypeptidase activity. It was found that addition of crude exact into pure amino acid standard curve had a significant difference from pure amino acid standard curve method (p < 0.05). There was no significant enzyme activity difference (p > 0.05) between addition of active crude exact and addition of inactive crude kind, when the proper dilute multiple was used. It was concluded that the addition of crude enzyme extract to the calibration was needed to eliminate the interference of free amino acids and related compounds presented in crude enzyme extract.     

Dose calculation validation of a convolution algorithm in a solid water phantom

PurposeThe dose calculated using a convolution algorithm should be validated in a simple homogeneous water-equivalent phantom before clinical use. The dose calculation accuracy within a solid water phantom was investigated.MethodsThe specific Gamma knife design requires a dose rate calibration within a spherical solid water phantom. The TMR10 algorithm, which approximates the phantom material as liquid water, correctly computes the absolute dose in water. The convolution algorithm, which considers electron density miscalculates the dose in water as the phantom Hounsfield units were converted into higher electron density when the original CT calibration curve was used. To address this issue, the electron density of liquid water was affected by modifying the CT calibration curve. The absolute dose calculated using the convolution algorithm was compared with that computed by the TMR10. The measured depth dose profiles were also compared to those computed by the convolution and TMR10 algorithms. A patient treatment was recalculated in the solid-water phantom and the delivery quality assurance was checked.ResultsThe convolution algorithm and the TMR10 calculate an absolute dose within 1% when using the modified CT calibration curve. The dose depth profile calculated using the convolution algorithms was superimposed on the TMR10 and measured dose profiles when the modified CT calibration curve was applied. The Gamma index was better than 93%.ConclusionsDose calculation algorithms, which consider electron density, require a CT calibration curve adapted to the phantom material to correctly compute the dose in water.     

Influence of temperature on the number of Legionella pneumophila in hot water systems

The occurrence of legionella in the hot water systems of two buildings (A and B) was investigated in relation to the water temperature. The peripheral parts of both hot water systems were found to be colonized by these organisms. A temperature of 60C in the hot water mains returning from the building eliminated legionellas from the mains as well as from the peripheral taps and showers. Legionellas could be isolated from taps, showers and the mains when the temperature in the return mains was kept at 54C. The hot water systems could not be completely decontaminated by raising the hot water temperature in the return mains to 70C combined with flushing all the taps and showers. It is suggested that failure to decontaminate the systems is due to dead ends in the pipeline network, which are not reached by the hot water and that these dead ends are the source for recolonization of the systems.     

Turbidimetric method for quantitative determination of triton X-100 with silicotungstic acid

The Formation of Triton X-100-silicotungstic acid complex was studied. Quantitative turbidimetric determination of the detergent based on this process was suggested. This method allows to determining the complex formation at any wavelength in the range from 350 (epsilon 350 = 15,600 cm-1 M-1) to 600 nm (epsilon 600 = = 9090 cm-1 M-1). The calibration curve for Triton X-100 recorded at 350 nm is linear in the concentration range of 0 to 30 micrograms/ml. A sigmoid calibration curve was observed at longer wavelengths. A linear fragment of the calibration curve recorded at 600 nm was found at a concentration of Triton X-100 of about 5 micrograms/ml. The complex nature of calibration curves can be explained by heterogeneity of the complex dispersion.     

Use of flow cytometry and SNARF to calibrate and measure intracellular pH in NS0 cells.

BACKGROUND: Two calibration methods have been proposed for determining the relation between the fluorescence ratio of a pH-sensitive fluorescent indicator and intracellular pH (pHi). The first method uses nigericin to clamp pHi to external pH (pHe) and the second is the null point method. We compared these different calibration methods, solution conditions, and temperatures by using flow cytometry and the fluorescent dye 1,5- (and-6)-carboxy seminaphtorhodafluor-1-acetoxymethyl ester with an NS0 cell line. METHODS: The nigericin method was performed in glucose solutions supplemented with KCl and 2-(N-morpholino)ethane sulphonic acid plus tris(hydroxymethyl)aminomethane (solution 1A), a mixture of K2HPO4/KH2PO4 in glucose-solution supplemented solutions (solution 2A), or bicarbonate buffered growth medium supplemented with K2HPO4/KH2PO4 (solution 2B); this allowed a range of pHe values to be used. The effect of temperature (22 degrees C or 37 degrees C) on the nigericin calibration curve was also investigated. The null point method was performed by using a series of solutions with a mixture of weak acid and base with a known pHi response. RESULTS: Using solution 1A as the calibration solution resulted in acidic values of pHi for cells cultured in medium as compared with the values achieved with solution 2A. Using solution 2B did not affect the calibration curve. For the temperatures considered in this study, there was no affect on the calibration curve, but temperature did affect the pHi value of cells in phosphate buffered saline. The pseudo-null point method used with flow cytometry resulted in a calibration curve that was significantly different (P<0.05) from that achieved using the nigericin method. CONCLUSIONS: Our data indicates that the choice of calibration solution can affect the reported pHi value; therefore, careful choice of solution is important.     

High-throughput determination of identity, purity, and quantity of combinatorial library members using LC/MS/UV/ELSD

We have used a high-throughput LC/MS/UV/ELSD method to rapidly determine the absolute quantity and purity of 42 organic compounds from seven lead discovery libraries. A general calibration curve generated from a different set of 42 compounds with seven different scaffolds was used in this analysis. We have also studied 33 organic compounds with different molecular weight (MW) by LC/MS/UV/ELSD to investigate the effect of MW on ELSD response and the accuracy for purity and quantity measurement using UV(214) and ELSD. A general ELSD calibration curve from these compounds was also generated to quantify 42 library compounds. Purity measurement by ELSD underestimates the amounts of impurities due to a reduced ELSD response from smaller molecular weight impurities often produced in library synthesis. Absolute quantity determination by ELSD is more accurate (RSD 28%) than that by UV(214) (48%) using a calibration curve generated from the same set of compounds with diverse MWs. Error assessment for the measurement of absolute quantity of a class of commercial compounds and a class of representing reference compounds from seven diverse lead discovery libraries shows that structurally related compounds should be used to generate calibration curves to sustain smaller deviation.     

A study of the suitability of gas chromatography-electron capture detection for the analysis of deoxynivalenol in cereals

A gas chromatographic-electron capture detection (GC-ECD) method for the analysis of deoxynivalenol (DON) in cereals was investigated. The sample was extracted with a mixture of acetonitrile-water and purified with a MycoSep #225 column. The silylation was performed with Tri-Sil-TBT reagent, followed by dilution with hexane and a washing step with buffer. By using Tri-Sil-TBT reagent no double peaks were observed for DON in the gas chromatograms, in comparison with two other silylation reagents TMSI and Tri-Sil-Z. The use of trichothecolone (TRI) as an internal standard for DON was studied in order to indicate possible problems in the derivatisation reaction. TRI proved to be a relatively good internal standard for DON in cereal samples, as well as 1,1-bis-(4-chlorophenyl)-2,2-dichloroethylene (DDE), which was used as a GC standard for ensuring the function of GC-ECD. During the study, a matrix effect was clearly observed between the cereal matrix-assisted calibration curve and the calibration curve prepared without cereal matrix. The results of spiked and reference material samples, quantified with the calibration curve prepared without and with matrix, demonstrated that the matrix affects the results. However, after recovery correction the results were comparable. The validation results demonstrated that the GC-ECD method for DON analysis in cereals is sufficiently reliable.     

Application of standard addition for the determination of carboxypeptidase activity in <Emphasis Type="Italic">Actinomucor elegans</Emphasis> bran koji

Leucine carboxypeptidase (EC 3.4.16) activity in Actinomucor elegans bran koji was investigated via absorbance at 507 nm after stained by Cd-nihydrin solution, with calibration curve A, which was made by a set of known concentration standard leucine, calibration B, which was made by three sets of known concentration standard leucine solutions with the addition of three concentrations inactive crude enzyme extract, and calibration C, which was made by three sets of known concentration standard leucine solutions with the addition of three concentrations crude enzyme extract. The results indicated that application of pure amino acid standard curve was not a suitable way to determine carboxypeptidase in complicated mixture, and it probably led to overestimated carboxypeptidase activity. It was found that addition of crude exact into pure amino acid standard curve had a significant difference from pure amino acid standard curve method (p < 0.05). There was no significant enzyme activity difference (p > 0.05) between addition of active crude exact and addition of inactive crude kind, when the proper dilute multiple was used. It was concluded that the addi-tion of crude enzyme extract to the calibration was needed to eliminate the interference of free amino acids and related compounds presented in crude enzyme extract.     

关于提高血气分析仪测量精度的探讨

血气分析已广泛用于昏迷、休克、严重外伤的危急病人的血液酸碱度、氧分压、二氧化碳分压的测量。测量数据的准确性至关重要。本文对与测量精度有关的几个环节如计量检定、质控与定标、样本采集与测量、日常维护与故障处理进行探讨,提出提高血气分析精度的解决方案。     

Improving provenance studies in migratory birds when using feather hydrogen stable isotopes

Hydrogen stable isotopes (δ²H) in feathers are used to determine the origin and migration strategy of birds. To identify the geographic location of the site of feather synthesis, calibration curves for the relation between feather δ²H and amount‐weighted growing‐season δ²H in precipitation are used to generate feather δ²H isoscapes. Factors like species, age and year might generate isotopic variation in calibration curves, but the extent to which accounting for variation may improve calibration curves and hence provenance determination of birds, is unknown. We compared three European calibration curves: 1) an existing multi‐species curve, uncorrected for age and year variation, and two species‐specific calibration curves, based on mallard Anas platyrhynchos feathers, of 2) varying age and year, and 3) juvenile natal origin, corrected for year variation. Calibration curves using ordinary least square linear regression (OLS) as opposed to standard major axis regression showed least bias in estimation. As expected, we found that a single species (mallard) OLS calibration curve corrected for age and year yielded the highest coefficient of determination, but was still surprisingly similar to the other two calibration curves. Nevertheless, when using feathers of known‐origin to assess provenance accuracy, the calibration curve that accounted for species, age and year variation yielded the best prediction in as many as 59% of the cases. Our study is the first to demonstrate implications of isotopic variation on assessing the origin of individual birds, but also highlights the relatively small gain in precision that is achieved by generating species, age and year specific calibration curves rather than resorting to more general alternatives.     

A Bayesian method for calculating real-time quantitative PCR calibration curves using absolute plasmid DNA standards

Background  

In real-time quantitative PCR studies using absolute plasmid DNA standards, a calibration curve is developed to estimate an unknown DNA concentration. However, potential differences in the amplification performance of plasmid DNA compared to genomic DNA standards are often ignored in calibration calculations and in some cases impossible to characterize. A flexible statistical method that can account for uncertainty between plasmid and genomic DNA targets, replicate testing, and experiment-to-experiment variability is needed to estimate calibration curve parameters such as intercept and slope. Here we report the use of a Bayesian approach to generate calibration curves for the enumeration of target DNA from genomic DNA samples using absolute plasmid DNA standards.     

Assessment of Inbreeding by DNA Fingerprinting: Development of a Calibration Curve Using Defined Strains of Chickens

By analyzing DNA fingerprints of chickens from seven well-defined genetic groups, a calibration curve was established relating the degree of inbreeding with the average band frequency, allelic frequency and band sharing. The probe used was bacteriophage M13 DNA and digestion of the genomic DNA was carried out with the MspI restriction enzyme. The analysis also provided an estimate of the average allelic frequency at a hypervariable locus and the average mutation frequency per locus and generation. The values of 0.24 and 1.7 X 10(-3), respectively, are similar to the estimates for humans using other probes and hybridization protocols. It is suggested that the calibration curve established can be used for determining inbreeding not only in chickens, but also in other species.     

Direct interaction between cholesterol and phosphatidylcholines in hydrated membranes revealed by ATR-FTIR spectroscopy

By using attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and curve fitting we have examined temperature dependence and composition dependence of the shape of the carbonyl band in phosphatidylcholine/cholesterol model membranes. Membranes were hydrated either in excess water or in excess deuterated water. The studied binary mixtures exhibit different lipid phases at appropriate temperature and amount of cholesterol, among them also the so-called liquid-ordered phase. The results confirm that cholesterol has a significant indirect influence on the carbonyl band through conformational and hydration effects. This influence was interpreted in view of the known temperature composition phase diagrams for inspected binary mixtures. In addition, direct interaction was observed, which could point to the presence of hydrogen bond between cholesterol and carbonyl group. This direct interaction, though weak, might play at least a partial role in the stabilization of cholesterol-rich lipid domains in model and biological membranes.     

Standardization of the antibody to hepatitis B surface antigen concentration

We examine sources of potential bias in the estimation of antibody to hepatitis B surface antigen concentrations by a calibration curve for conversion of RIA units to international units. We show by calculation and example that very large biases may exist, whereas accurate estimation is needed in screening programmes and in clinical trials for the evaluation of the immunogenicity of various types and schedules of hepatitis B vaccine. It is recommended that the danger of large biases be avoided by using the laboratory's own calibration curve, calibrated against dilutions of the WHO standard, using a standard as positive control in the radioimmunoassay. Furthermore, serum samples should be diluted to a concentration close to that of the positive control.     

大鼠淋巴细胞培养上清液总IgG 含量ELISA 检测方法的建立

目的:建立一种定量测定大鼠淋巴细胞培养上清液中总IgG(免疫球蛋白G)含量的双抗体夹心ELISA(酶联免疫吸附试验)检测方法。方法:用方阵实验确定包被抗体、检测抗体的最佳工作浓度;绘制标准曲线,确定线性范围;评价标准曲线的可重复性、精密度和可应用性。结果:包被抗体和检测抗体的最佳效价分别为2μg/ml和1:4000稀释;检测的线性范围为0.25-16ng/ml。经方法学评价,可重复性和精密度较高,应用性较强。结论:该方法灵敏度高,重复性好,可作为科研过程中检测大鼠淋巴细胞培养上清液总IgG含量的一种精确、方便、可靠的方法。     

Survismeter--type I and II for surface tension, viscosity measurements of liquids for academic, and research and development studies

For centuries surface tension (gamma) and viscosity (eta) data have been measured with individual instruments consuming much time and materials. Thus the two different types of survismeters have been designed and made of borosil glass material for surface tension and viscosity data to rationalize frictional and cohesive forces, respectively. Friccohesity (sigma (sm(-1), second per meter)) is derived from Fric of frictional and cohesity of cohesive forces of the liquid respectively, and denoted by rational coefficient a eta/gamma (sigma). The values of the friccohesity are correlated to the dipole moment of liquids and their plot gives a standard calibration curve along with an equation of the curve with definite values of the coefficients, the friccohesity values are put on the calibration curve to retrieve the dipole moment values. Here, the sigma values for each of dimethylformamide, dimethylsulfoxide and acetronitrile solvents along with their 0.05, 0.10 and 0.20 mol kg(-1) aqueous solutions, respectively, were determined at 293.15K and plotted against their dipole moment values for standard calibration curve. The range of the dipole moment values for calibration curve is pre-decided and the sigma values for homogenous solutions of compositions below their saturation point can be measured with +/-1 x 10(-5)sm(-1).     

Comparison of ELISA and capillary electrophoresis with laser-induced fluorescence detection in the analysis of Ochratoxin A in low volumes of human blood serum

In this paper the determination of Ochratoxin A (OTA) in low volumes of human blood serum by enzyme-linked immunosorbent assay (ELISA) is compared with an appropriate capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) method. In order to use ELISA for high-throughput analysis in epidemiological studies no sample cleanup was performed. Both methods showed a limit of detection (LOD) of 0.5 ng/mL. Comparing the precisions of both methods, the data show that the quantified concentrations in ELISA are higher than the corresponding concentrations in the CE-LIF method. Using a matrix calibration curve instead of a standard calibration curve the reproducibilities of both methods are comparable. No additional matrix effect could be observed by adding phenylalanine as probable matrix compound to the serum.     

Chromosome aberrations induced in human lymphocytes by in vitro and in vivo X-rays

A dose-effect curve is presented obtained by analysis of dicentric chromosomes and centric ring chromosomes in lymphocyte metaphase spreads of three healthy volunteers after in vitro 100 kV X-ray-irradiation of peripheral blood samples. This calibration curve follows a linear quadratic equation, y=c+alpha D+beta D(2), with the coefficients: y=(0.0005+/-0.0001)+(0.0355+/-0.0066)D+(0.0701+/-0.0072)D(2). The model is based on 13.231 first-division metaphases analyzed after in vitro exposure to doses ranging from 0.1 to 2.0 Gy at a dose rate of 0.4 Gy min(-1). Significant overdispersion of the observed chromosomal aberrations was evident for dose points 1.0 and 2.0 Gy, respectively. The calibration curve was applied to derive equivalent whole body doses of three subjects after suspected extensive exposure to diagnostic X-rays.