Recombinant Minimalist Spider Wrapping Silk Proteins Capable of Native-Like Fiber Formation

Spider silks are desirable biomaterials characterized by high tensile strength, elasticity, and biocompatibility. Spiders produce different types of silks for different uses, although dragline silks have been the predominant focus of previous studies. Spider wrapping silk, made of the aciniform protein (AcSp1), has high toughness because of its combination of high elasticity and tensile strength. AcSp1 in Argiope trifasciata contains a 200-aa sequence motif that is repeated at least 14 times. Here, we produced in E. coli recombinant proteins consisting of only one to four of the 200-aa AcSp1 repeats, designated W₁ to W₄. We observed that purified W₂, W₃ and W₄ proteins could be induced to form silk-like fibers by shear forces in a physiological buffer. The fibers formed by W₄ were ∼3.4 µm in diameter and up to 10 cm long. They showed an average tensile strength of 115 MPa, elasticity of 37%, and toughness of 34 J cm⁻³. The smaller W₂ protein formed fewer fibers and required a higher protein concentration to form fibers, whereas the smallest W₁ protein did not form silk-like fibers, indicating that a minimum of two of the 200-aa repeats was required for fiber formation. Microscopic examinations revealed structural features indicating an assembly of the proteins into spherical structures, fibrils, and silk-like fibers. CD and Raman spectral analysis of protein secondary structures suggested a transition from predominantly α-helical in solution to increasingly β-sheet in fibers.     

Aciniform spidroin, a constituent of egg case sacs and wrapping silk fibers from the black widow spider Latrodectus hesperus

Spiders produce high performance fibers with diverse mechanical properties and biological functions. Molecular and biochemical studies of spider egg case silk have revealed that the main constituent of the large diameter fiber contains the fibroin TuSp1. Here we demonstrate by SDS-PAGE and protein silver staining the presence of a distinct approximately 300-kDa polypeptide that is found in solubilized egg case sacs. Combining matrix-assisted laser desorption ionization tandem time-of-flight mass spectrometry and reverse genetics, we have isolated a novel gene called AcSp1-like and demonstrate that its protein product is assembled into the small diameter fibers of egg case sacs and wrapping silks from the black widow spider, Latrodectus hesperus. BLAST searches of the NCBInr protein data base using the amino acid sequence of AcSp1-like revealed similarity to AcSp1, an inferred protein proposed to be a component of wrapping silk. However, the AcSp1-like protein was found to display more nonuniformity in its internal iterated repeat modules than the putative AcSp1 fibroin. Real time quantitative PCR analysis demonstrates that the AcSp1-like gene displays an aciniform gland-restricted pattern of expression. The amino acid composition of the fibroins extracted from the luminal contents of the aciniform glands was remarkably similar to the predicted amino acid composition of the AcSp1-like protein, which supports the assertion that AcSp1-like protein represents the major constituent stored within the aciniform gland. Collectively, our findings provide the first direct molecular evidence for the involvement of the aciniform gland in the production of a common fibroin that is assembled into the small diameter threads of egg case and wrapping silk of cob weavers.     

Expression and characterization of chimeric spidroins from flagelliform-aciniform repetitive modules

Spiders can produce up to seven different types of silks or glues with different mechanical properties. Of these, flagelliform (Flag) silk is the most elastic, and aciniform (AcSp1) silk is the toughest. To produce a chimeric spider silk (spidroin) Flag_R-AcSp1_R, we fused one repetitive module of flagelliform silk from Araneus ventricosus and one repetitive module of aciniform silk from Argiope trifasciata. The recombinant protein expressed in E. coli formed silk-like fibers by manual-drawing. CD analysis showed that the secondary structure of Flag_R-AcSp1_R spidroin remained stable during the gradual reduction of pH from 7.0 to 5.5. The spectrum of FTIR indicated that the secondary structure of Flag_R-AcSp1_R changed from α-helix to β-sheet. The conformation change of Flag_R-AcSp1_R was similar to other spidroins in the fiber formation process. SEM analysis revealed that the mean diameter of the fibers was around 1 ~ 2 μm, and the surface was smooth and uniform. The chimeric fibers exhibited superior toughness (~33.1 MJ/m³) and tensile strength (~261.4 MPa). This study provides new insight into design of chimeric spider silks with high mechanical properties.     

Spider minor ampullate silk proteins are constituents of prey wrapping silk in the cob weaver Latrodectus hesperus

Spiders spin high performance fibers with diverse biological functions and mechanical properties. Molecular and biochemical studies of spider prey wrapping silks have revealed the presence of the aciniform silk fibroin AcSp1-like. In our studies we demonstrate the presence of a second distinct polypeptide present within prey wrapping silk. Combining matrix-assisted laser desorption ionization tandem time-of-flight mass spectrometry and reverse genetics, we have isolated a novel gene called MiSp1-like and demonstrate that its protein product is a constituent of prey wrap silks from the black widow spider, Latrodectus hesperus. BLAST searches of the NCBInr protein database using the amino acid sequence of MiSp1-like revealed similarity to the conserved C-terminal domain of silk family members. In particular, MiSp1-like showed the highest degree of sequence similarity to the nonrepetitive C-termini of published orb-weaver minor ampullate fibroin molecules. Analysis of the internal amino acid sequence of the black widow MiSp1-like revealed polyalanine stretches interrupted by glycine residues and glycine-alanine couplets within MiSp1-like as well as repeats of the heptameric sequence AGGYGQG. Real-time quantitative PCR analysis demonstrates that the MiSp1-like gene displays a minor ampullate gland-restricted pattern of expression. Furthermore, amino acid composition analysis, coupled with scanning electron microscopy of raw wrapping silk, supports the assertion that minor ampullate silks are important constituents of black widow spider prey wrap silk. Collectively, our findings provide direct molecular evidence for the involvement of minor ampullate fibroins in swathing silks and suggest composite materials play an important role in the wrap attack process for cob-weavers.     

Complete gene sequence of spider attachment silk protein (PySp1) reveals novel linker regions and extreme repeat homogenization

Spiders use a myriad of silk types for daily survival, and each silk type has a unique suite of task-specific mechanical properties. Of all spider silk types, pyriform silk is distinct because it is a combination of a dry protein fiber and wet glue. Pyriform silk fibers are coated with wet cement and extruded into “attachment discs” that adhere silks to each other and to substrates. The mechanical properties of spider silk types are linked to the primary and higher-level structures of spider silk proteins (spidroins). Spidroins are often enormous molecules (>250 kDa) and have a lengthy repetitive region that is flanked by relatively short (∼100 amino acids), non-repetitive amino- and carboxyl-terminal regions. The amino acid sequence motifs in the repetitive region vary greatly between spidroin type, while motif length and number underlie the remarkable mechanical properties of spider silk fibers. Existing knowledge of pyriform spidroins is fragmented, making it difficult to define links between the structure and function of pyriform spidroins. Here, we present the full-length sequence of the gene encoding pyriform spidroin 1 (PySp1) from the silver garden spider Argiope argentata. The predicted protein is similar to previously reported PySp1 sequences but the A. argentata PySp1 has a uniquely long and repetitive “linker”, which bridges the amino-terminal and repetitive regions. Predictions of the hydrophobicity and secondary structure of A. argentata PySp1 identify regions important to protein self-assembly. Analysis of the full complement of A. argentata PySp1 repeats reveals extreme intragenic homogenization, and comparison of A. argentata PySp1 repeats with other PySp1 sequences identifies variability in two sub-repetitive expansion regions. Overall, the full-length A. argentata PySp1 sequence provides new evidence for understanding how pyriform spidroins contribute to the properties of pyriform silk fibers.     

1H, 13C and 15N NMR assignments of the aciniform spidroin (AcSp1) repetitive domain of Argiope trifasciata wrapping silk

Spider silk is one of nature's most remarkable biomaterials due to extraordinary strength and toughness not found in today's synthetic materials. Of the seven types of silk, wrapping silk (AcSp1) is the most extensible of the types of silks and has no sequence similarity to the other types. Here we report the chemical shifts for the AcSp1 199 amino acid protein repeat unit and its anticipated secondary structure based on secondary chemical shifts.     

Microdissection of Black Widow Spider Silk-producing Glands

Modern spiders spin high-performance silk fibers with a broad range of biological functions, including locomotion, prey capture and protection of developing offspring ^1,2. Spiders accomplish these tasks by spinning several distinct fiber types that have diverse mechanical properties. Such specialization of fiber types has occurred through the evolution of different silk-producing glands, which function as small biofactories. These biofactories manufacture and store large quantities of silk proteins for fiber production. Through a complex series of biochemical events, these silk proteins are converted from a liquid into a solid material upon extrusion.Mechanical studies have demonstrated that spider silks are stronger than high-tensile steel ³. Analyses to understand the relationship between the structure and function of spider silk threads have revealed that spider silk consists largely of proteins, or fibroins, that have block repeats within their protein sequences ⁴. Common molecular signatures that contribute to the incredible tensile strength and extensibility of spider silks are being unraveled through the analyses of translated silk cDNAs. Given the extraordinary material properties of spider silks, research labs across the globe are racing to understand and mimic the spinning process to produce synthetic silk fibers for commercial, military and industrial applications. One of the main challenges to spinning artificial spider silk in the research lab involves a complete understanding of the biochemical processes that occur during extrusion of the fibers from the silk-producing glands.Here we present a method for the isolation of the seven different silk-producing glands from the cobweaving black widow spider, which includes the major and minor ampullate glands [manufactures dragline and scaffolding silk] ^5,6, tubuliform [synthesizes egg case silk] ^7,8, flagelliform [unknown function in cob-weavers], aggregate [makes glue silk], aciniform [synthesizes prey wrapping and egg case threads] ⁹ and pyriform [produces attachment disc silk] ¹⁰. This approach is based upon anesthetizing the spider with carbon dioxide gas, subsequent separation of the cephalothorax from the abdomen, and microdissection of the abdomen to obtain the silk-producing glands. Following the separation of the different silk-producing glands, these tissues can be used to retrieve different macromolecules for distinct biochemical analyses, including quantitative real-time PCR, northern- and western blotting, mass spectrometry (MS or MS/MS) analyses to identify new silk protein sequences, search for proteins that participate in the silk assembly pathway, or use the intact tissue for cell culture or histological experiments.     

Chimeric spider silk proteins mediated by intein result in artificial hybrid silks

Hybrid silks hold a great potential as specific biomaterials due to its controlled mechanical properties. To produce fibers with tunable properties, here we firstly made chimeric proteins in vitro, called W2C4CT and W2C8CT, with ligation of MaSp repetitive modules (C) with AcSp modules (W) by intein trans splicing technology from smaller precursors without final yield reduction. Intein mediated chimeric proteins form fibers at a low concentration of 0.4 mg/mL in 50 mM K₃PO₄ pH 7.5 just drawn by hand. Hybrid fibers show smoother surface, and also have stronger chemical resistance as compared with fibers from W2CT (W fibers) and mixture of W2CT/C8CT (MHF8 fibers). Fibers from chimeric protein W2C4CT (HFH4) have improved mechanical properties than W fibers; however, with more C modules W2C8CT fibers (HFH8) properties decreased, indicates the length proportion of various modules is very important and should be optimized for fibers with specific properties. Generally, hybrid silks generated via chimeric proteins, which can be simplified by intein trans splicing, has greater potential to produce fibers with tunable properties. Our research shows that intein mediated directional protein ligation is a novel way to make large chimeric spider silk proteins and hybrid silks. © 2016 Wiley Periodicals, Inc. Biopolymers 105: 385–392, 2016.     

Variation in protein intake induces variation in spider silk expression

Background

It is energetically expensive to synthesize certain amino acids. The proteins (spidroins) of spider major ampullate (MA) silk, MaSp1 and MaSp2, differ in amino acid composition. Glutamine and proline are prevalent in MaSp2 and are expensive to synthesize. Since most orb web spiders express high proline silk they might preferentially attain the amino acids needed for silk from food and shift toward expressing more MaSp1 in their MA silk when starved.

Methodology/Principal Findings

We fed three spiders; Argiope aetherea, Cyrtophora moluccensis and Leucauge blanda, high protein, low protein or no protein solutions. A. aetherea and L. blanda MA silks are high in proline, while C. moluccesnsis MA silks are low in proline. After 10 days of feeding we determined the amino acid compositions and mechanical properties of each species'' MA silk and compared them between species and treatments with pre-treatment samples, accounting for ancestry. We found that the proline and glutamine of A. aetherea and L. blanda silks were affected by protein intake; significantly decreasing under the low and no protein intake treatments. Glutmaine composition in C. moluccensis silk was likewise affected by protein intake. However, the composition of proline in their MA silk was not significantly affected by protein intake.

Conclusions

Our results suggest that protein limitation induces a shift toward different silk proteins with lower glutamine and/or proline content. Contradictions to the MaSp model lie in the findings that C. moluccensis MA silks did not experience a significant reduction in proline and A. aetherea did not experience a significant reduction in serine on low/no protein. The mechanical properties of the silks could not be explained by a MaSp1 expressional shift. Factors other than MaSp expression, such as the expression of spidroin-like orthologues, may impact on silk amino acid composition and spinning and glandular processes may impact mechanics.     

悦目金蛛和棒络新妇卵袋丝物理化学结构表征及其力学性能研究

蜘蛛丝是一种具有优良机械性能的天然动物蛋白纤维,它特有的结构和性能与其生物学功能密切相关。作者采用氨基酸自动分析仪、傅立叶转换红外光谱仪、扫描电镜和电子单纤强力仪对悦目金蛛（Argiope amoena）和棒络新妇（Nephila clavata）的卵袋丝进行了物理化学结构表征与力学性能的研究,结果表明两种蜘蛛卵袋均由微米级柱状腺丝、大壶状腺丝、亚微米级或纳米级葡萄状腺丝构成。卵袋丝的表面形貌特征、极性氨基酸含量、大侧链与小侧链氨基酸的比值、无定型区、β-折叠结构与结晶结构的含量等氨基酸组成种类与蛋白质二级结构特征,均满足各自生物学功能对断裂强度、延展性、初始模量等力学性能的要求。     

Molecular cloning and characterization of the partial major ampullate silk protein gene from the spider Araneus ventricosus

Spider silks have great potential as biomaterials with extraordinary properties. Here, we report the cloning and characterization of the major ampullate silk protein gene from the spider Araneus ventricosus. A cDNA encoding the partial major ampullate silk protein (AvMaSp) was cloned from A. ventricosus. An analysis of the cDNA sequence shows that AvMaSp consists of a 240 amino acid repetitive region and a 99 amino acid C-terminal non-repetitive domain. The peptide motifs that were found in the spider major ampullate silk proteins, (A)n, (GA)n, and (GGX)n, were conserved in the repetitive region of AvMaSp. Phylogenetic analysis further confirmed that AvMaSp belongs to the spider major ampullate spidroin family of proteins. The AvMaSp-R cDNA, which encodes the 240 amino acid repetitive domain, was expressed as a soluble 22 kDa polypeptide in baculovirus-infected insect cells. Recombinant AvMaSp-R was degraded abruptly by trypsin. However, AvMaSp-R was stable at 100 °C for at least 30 min. Additionally, the AvMaSp-R was stable at pH values from 2 to 12 for at least 1 h. Taken together, our findings describe the molecular structure and biochemical properties of the A. ventricosus major ampullate silk protein and demonstrate its potential as a biomaterial.     

悦目金蛛拖牵丝力学性能的变异

蜘蛛丝作为一种具有优良机械性能的天然动物蛋白纤维,其特有的结构和机械性能与其生物学功能密切相关。由大壶状腺纺出的拖牵丝在蜘蛛的行走、建网、捕食、逃生、繁殖等多种生命活动中均发挥了重要的功能,其机械性能会受到多种内外因素相互作用的影响。本文对在不同体重、不同猎物饲养和不同营养状态3种条件下人工抽出的悦目金蛛(Argiope amoena)拖牵丝与其不同单丝间的力学性能进行了比较研究。结果表明,悦目金蛛拖牵丝的力学性能在组间、组内不同个体,以及同一个体不同丝纤维间变异都较大。随着蜘蛛个体的增大,蛛丝横截面直径逐渐增大,这会使得蛛丝的力学性能更好,便于作为救命索的拖牵丝在遇到危险时承受蜘蛛体重;蜘蛛在经过1个月的饥饿后,蛛丝在屈服点附近的力学性能并未发生显著变化,而断裂点应变和断裂能均显著减小,同时也表明无论对于作为救命索还是网丝,拖牵丝的弹性形变性能在与蛛丝相关的微观进化中要优先于塑性形变。这是蜘蛛在能量摄入受到限制时对拖牵丝的投入权衡的结果。     

Environmentally induced post‐spin property changes in spider silks: influences of web type,spidroin composition and ecology

Many spiders use silk to construct webs that must function for days at a time, whereas many other species renew their webs daily. The mechanical properties of spider silk can change after spinning under environmental stress, which could influence web function. We hypothesize that spiders spinning longer‐lasting webs produce silks composed of proteins that are more resistant to environmental stresses. The major ampullate (MA) silks of orb web spiders are principally composed of a combination of two proteins (spidroins) called MaSp1 and MaSp2. We expected spider MA silks dominated by MaSp1 to have the greatest resistance to post‐spin property change because they have high concentrations of stable crystalline β‐sheets. Some orb web spiders that spin three‐dimensional orb webs, such as Cyrtophora, have MA silks that are predominantly composed of MaSp1. Hence, we expected that the construction of three‐dimensional orb webs might also coincide with MA silk resistance to post‐spin property change. Alternatively, the degree of post‐spin mechanical property changes in different spider silks may be explained by factors within the spider's ecosystem, such as exposure to solar radiation. We exposed the MA silks of ten spider species from five genera (Nephila, Cyclosa, Leucauge, Cyrtophora, and Argiope) to ecologically high temperatures and low humidity for 4 weeks, and compared the mechanical properties of these silks with unexposed silks. Using species pairs enabled us to assess the influence of web dimensionality and MaSp composition both with and without phylogenetic influences being accounted for. We found neither the MaSp composition nor the three‐dimensionality of the orb web to be associated with the degree of post‐spin mechanical property changes in MA silk. The MA silks in Leucauge spp. are dominated by MaSp2, which we found to have the least resistance to post‐spin property change. The MA silk in Argiope spp. is also dominated by MaSp2, but has high resistance to post‐spin property change. The ancestry of Argiope is unresolved, but it is largely a tropical genus inhabiting hot, open regions that present similar stressors to silk as those of our experiment. Ecological factors thus appear to influence the vulnerability of orb web spider MA silks to post‐spin property change. © 2012 The Linnean Society of London, Biological Journal of the Linnean Society, 2012, 106 , 580–588.     

Spider Glue Proteins Have Distinct Architectures Compared with Traditional Spidroin Family Members

Adhesive spider glues are required to perform a variety of tasks, including web construction, prey capture, and locomotion. To date, little is known regarding the molecular and structural features of spider glue proteins, in particular bioadhesives that interconnect dragline or scaffolding silks during three-dimensional web construction. Here we use biochemical and structural approaches to identify and characterize two aggregate gland specific gene products, AgSF1 and AgSF2, and demonstrate that these proteins co-localize to the connection joints of both webs and wrapping silks spun from the black widow spider, Latrodectus hesperus. Protein architectures are markedly divergent between AgSF1 and AgSF2, as well as traditional spider silk fibroin family members, suggesting connection joints consist of a complex proteinaceous network. AgSF2 represents a nonglycosylated 40-kDa protein that has novel internal amino acid block repeats with the consensus sequence NVNVN embedded in a glycine-rich matrix. Analysis of the amino acid sequence of AgSF1 reveals pentameric QPGSG iterations that are similar to conserved modular elements within mammalian elastin, a rubber-like elastomeric protein that interfaces with collagen. Wet-spinning methodology using purified recombinant proteins show AgSF1 has the potential to self-assemble into fibers. X-ray fiber diffraction studies performed on these synthetic fibers reveal the presence of noncrystalline domains that resemble classical rubber networks. Collectively, these data support that the aggregate gland serves to extrude a protein mixture that contains substances that allow for the self-assembly of fiber-like structures that interface with dragline silks to mediate prey capture.     

Spider silks: recombinant synthesis,assembly, spinning,and engineering of synthetic proteins

Since thousands of years humans have utilized insect silks for their own benefit and comfort. The most famous example is the use of reeled silkworm silk from Bombyx mori to produce textiles. In contrast, despite the more promising properties of their silk, spiders have not been domesticated for large-scale or even industrial applications, since farming the spiders is not commercially viable due to their highly territorial and cannibalistic nature. Before spider silks can be copied or mimicked, not only the sequence of the underlying proteins but also their functions have to be resolved. Several attempts to recombinantly produce spider silks or spider silk mimics in various expression hosts have been reported previously. A new protein engineering approach, which combines synthetic repetitive silk sequences with authentic silk domains, reveals proteins that closely resemble silk proteins and that can be produced at high yields, which provides a basis for cost-efficient large scale production of spider silk-like proteins.     

Molecular studies of a novel dragline silk from a nursery web spider, Euprosthenops sp. (Pisauridae)

Various spider species produce dragline silks with different mechanical properties. The primary structure of silk proteins is thought to contribute to the elasticity and strength of the fibres. Previously published work has demonstrated that the dragline silk of Euprosthenops sp. is stiffer then comparable silk of Nephila edulis, Araneus diadematus and Latrodectus mactans. Our studies of Euprosthenops dragline silk at the molecular level have revealed that nursery web spider fibroin has the highest polyalanine content among previously characterised silks and this is likely to contribute to the superior qualities of pisaurid dragline.     

Spider silks from plants – a challenge to create native-sized spidroins

Silk threads from spiders exhibit extraordinary mechanical properties, such as superior toughness and elasticity. Spider silks consist of several different large repetitive proteins that act as the basic materials responsible for these outstanding features. The production of spider silk protein variants in plants opens up new horizons in the production and functional investigation that enable the use of spider silks in innovative material development, nanotechnology and biomedicine in the future. This review summarizes and discusses production of spider silk protein variants in plants, especially with regards to plant expression systems, purification strategies, and characteristics of spider silk variants. Furthermore, the challenge of producing native-sized recombinant spidroins in planta is outlined, presenting three different strategies for achieving these high repetitive proteins with the help of non-repetitive C-terminal domains, crosslinking transglutaminase, and self-linking inteins. The potential of these fascinating proteins in medicine is also highlighted.     

Proline and processing of spider silks

Major ampullate (MAA) silks from a variety of spider species were collected by artificial silking that adjusted the samples to have similar breaking strains. Those silks are highly comparable in post-yield mechanical properties, but their supercontraction behaviors and initial moduli vary in large ranges and both correlate with the content of one amino acid, proline. These relationships, in combination with protein sequence data, support the hypothesis that the proline-related motif, that is, GPGXX, may play a key role in silk. This also explains the interspecific variability of spider dragline silk. Moreover, MAA silks from three representative species were prepared in a range of processing conditions and their mechanical properties were compared. Our results indicate how chemical compositions, coupled with processing conditions, shape the mechanical properties of the spider silk.